Develop Bugs

Latest Rom

Hi guys, I understand all the roms were taken off this site but I need some help.
I bought the HTC excalibur today and it has a test rom on it. as a result I cannot use wifi as it says driver is not found. Where can I find the latest htc excalibur rom.

check in my sig

your device may not have the hardware. The test ROM on my device had no problems with WiFi but some devices have been sold without the hardware and the firmware that has the WiFi drivers makes no difference.
Just a possibility...

excalibur
is there any way to get this excalibur wm5.0 in spanish?.. please.. ?!

The Latest Rom Should Be The Shipping Rom Wm6 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

They should ship the original wm06 ROM now in april, anyone know when exactly?

htc s620
make sure you fallow up this page
http://www.europe.htc.com/support/software/htcs620.html

ok i will chek it regulary

Holy crap!
bgniko said:
check in my sig
Click to expand...
Click to collapse
bgniko, you're are AWESOME! I must have spent in excess of 4 hours looking around the Internet for different ROMs to use with my T-Mobile Dash, and you really helped me out. Thanks!
P.S. If you happen to find the Dopod C720W ROM (looking for it for the Traditional Chinese support), please let me know. It's not available on Dopod Taiwan's member only site... yet.

WM6 WWE for P3600?

Now that the official WM6 upgrade has been released for the D810, does anyone have any updated information as to whether it will be released for the P3600 and if so, what time frame?

I don't believe HTC has agreed to release it. Why don't you just flash hard-spl and a nospl version of it posted here?

Shadowmite said:
I don't believe HTC has agreed to release it. Why don't you just flash hard-spl and a nospl version of it posted here?
Click to expand...
Click to collapse
I'm just being cautious. I'm on T-Mobile USA and developed SMS sending problems with the official WWE GPS upgrade, so I'm now hesitant to try a ROM not intended for my P3600. Perhaps if someone on T-Mobile USA has successfully used the D810 WM6 ROM, I'd be willing to take a chance. I sure would like HTML capable email!

Their excuse...
Hello Sir,
The network partner from HTC did not request the upgrade for the Windows mobile 6 for the P3600, that's why unfortunately the HTC P3600 will not have this upgrade.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
**** ********
HTC Europe
[email protected]
http://www.htc.com
Click to expand...
Click to collapse

that's what HTC europe said me today.
Hello Sir,
Unfortunately HTC Europe will not release Windows mobile 6.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Lena
HTC Europe

PGMMA said:
I'm just being cautious. I'm on T-Mobile USA and developed SMS sending problems with the official WWE GPS upgrade, so I'm now hesitant to try a ROM not intended for my P3600. Perhaps if someone on T-Mobile USA has successfully used the D810 WM6 ROM, I'd be willing to take a chance. I sure would like HTML capable email!
Click to expand...
Click to collapse
You just need a setup cab file for t-mobile's settings here in the US. I'm on cingular so I don't have one off hand, but let me search for ya...
http://forum.xda-developers.com/attachment.php?attachmentid=42298&d=1182761296
I think that's what you'll need... And of course you can always flash back to your original wm5 rom if needed...

Shadowmite said:
You just need a setup cab file for t-mobile's settings here in the US. I'm on cingular so I don't have one off hand, but let me search for ya...
http://forum.xda-developers.com/attachment.php?attachmentid=42298&d=1182761296
I think that's what you'll need... And of course you can always flash back to your original wm5 rom if needed...
Click to expand...
Click to collapse
Thank you, but all the settings are correct and everthing else (MMS, EMail, Internet, etc) works. The only setting I've found for SMS is the Service Center Number and that's correct. Receiving SMS works and sending works from some some areas - just not where I live.
So installing hard SPL and then flashing the non SPL ROM is all that's required to update to the D810 WM6 upgrade?

Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.

Shadowmite said:
Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.
Click to expand...
Click to collapse
I appreciate it. Maybe by then I'll have the nerve to try the upgrade.

Shadowmite said:
Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.
Click to expand...
Click to collapse
Thank you, that would be nice for all those P3600 owners that are getting into flashing trouble.

Any news?
Did anyone make a safe WM6 upgrade for p3600 yet?

read the posts! there are many wm6 roms overhere.

HTC WWE Rom Upgrade

Hi Guys,
I have an MDA Vario II on T-Mobile UK. I Understand (I think) the reasons that you guys use HardSPL and Super CID etc but I have a simple query.
I have downloaded the HTC WWE Rom from the links here on this site. Do I have to bother with the normal runaround (HardSPL / Super CID) as this is an "official" update for the hermes ?
I do not intend to use my Hermes with A.n.other provider just T-Mobile. Will I have to do anything special ?
Before you flame me (Somebody will be tempted I am sure) I have read and re-read the forums here, but they all seem to point that the steps like Hardspl and SuperCID are necessary only if applying cooked roms !?!

yes no matter what just cid unlock and get hard spl v7 so you cant brick your hermes
dont be a N00B,
jdac21

jdac21 said:
yes no matter what just cid unlock and get hard spl v7 so you cant brick your hermes
dont be a N00B,
jdac21
Click to expand...
Click to collapse
Thanks for the prompt response, I am still confused though. I assumed I didn't have to worry about bricking if I was using the official HTC Rom?
Also I read that HardSPL7 would meant the HTC Rom didn't work and I would have to go with a cooked ROM, in which case I might as well just go Schapps or something. I would like to just go with the basic WM6 ROM HTC provide and tweak it with software. No offence to any of the chefs here of course, but I don't think I need anything fancy.

nuthing will work aprt from the stocck t-mobile rom so you hav to cid and hard spl i got vario 2 aswell and it will not brick if you do these things
than you can flash any rom

Ok Cool. Thanks for the advice. I will let you know how it turns out.

gimme your msn and ill go through it with you

download this rom its great http://rapidshare.com/files/53224152/supa_dupa_beta_2.zip

jdac21 said:
gimme your msn and ill go through it with you
Click to expand...
Click to collapse
Thanks for the offer and I would take you up on it, but ... the only MSN I have currently ..... Is on my Phone !!!
Thanks for the link above, which ROM is that ?

duttythroy beta rom
get any rom for herme after you cid and simunlock then get hard spl v7

jdac21 said:
duttythroy beta rom
get any rom for herme after you cid and simunlock then get hard spl v7
Click to expand...
Click to collapse
You don't need to do a CID unlock if you apply Hard SPL V7. Hard SPL will make your device think that is SuperCID. You need only SIM unlock if you're going to use other than T-Mobile network.
Cheers

Excalibur Update SPL (USPL) 1.11

Hi guys,
I've just implemented an Excalibur USPL which allows you to flash any Excalibur ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Excalibur 1.11 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Excalibur after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Excalibur ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
The main reason for implementing this USPL is to support the poor guys who bricked their wifi. See this thread.
But those who want to flash a device where wifi works don't need to be afraid that wifi fails after the upgrade.
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Excalibur USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Excalibur-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
Excalibur USPL- CID BYPASS.zip : instructions included
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates)
Excalibur-USPL-RUU.zip: flash version of USPL
Excalibur USPL- CID BYPASS- JumpSPL.zip: version based on pof's JumpSPL instead of haret
SurrealNetworksAppUnlock.cab: alternative application unlocker (use this if SDA_ApplicationUnlock does not work)
Credits: in particular to pof. This USPL and also the one for Vox is based on his USPL for the Elf. See here

Good job jockyw2001 ...
Let's see if the poor guys can turn the wifi back on again.

Good!!!!
Hey dude! Thats a real gooooood work!! Now I hava a free cid unlocked device WITH wifi Good that i waited until someone patched this mistake... A real good Job!! I can recommend this progress of unlocking!! by the way: I had an O2 Cosmo (German) Device.. So it wors with other too.. Maybe i would like to donate a small amount... but know i don't have money.. maybe next month! Do you have a paypal account?! Thank yo very much!
Phil

phlipse said:
Hey dude! Thats a real gooooood work!! Now I hava a free cid unlocked device WITH wifi Good that i waited until someone patched this mistake... A real good Job!! I can recommend this progress of unlocking!! by the way: I had an O2 Cosmo (German) Device.. So it wors with other too.. Maybe i would like to donate a small amount... but know i don't have money.. maybe next month! Do you have a paypal account?! Thank yo very much!
Phil
Click to expand...
Click to collapse
Thank you for testing and glad it works fine!
I may consider to cash in if I manage to rescue the guys who lost wifi
Cheers
JockyW

jockyw2001 said:
Thank you for testing and glad it works fine!
I may consider to cash in if I manage to rescue the guys who lost wifi
Cheers
JockyW
Click to expand...
Click to collapse
You are really a hero jocky! Thanks for your hard work!

da_mayhem said:
You are really a hero jocky! Thanks for your hard work!
Click to expand...
Click to collapse
Yeah thats true =)

phlipse said:
Hey dude! Thats a real gooooood work!! Now I hava a free cid unlocked device WITH wifi Good that i waited until someone patched this mistake... A real good Job!! I can recommend this progress of unlocking!! by the way: I had an O2 Cosmo (German) Device.. So it wors with other too.. Maybe i would like to donate a small amount... but know i don't have money.. maybe next month! Do you have a paypal account?! Thank yo very much!
Phil
Click to expand...
Click to collapse
Phil, to avoid misunderstandings: after running the USPL your device is not permanently CID unlocked !! It is only unlocked when you run it. After you flash a ROM it is CID locked as before. So each time you wonna flash a ROM you must run USPL first.

da_mayhem said:
You are really a hero jocky! Thanks for your hard work!
Click to expand...
Click to collapse
agreed. thanks a lot for your hard work, i appreciate it.
i'll integrate your CID Bypass in my Windows Mobile 6 guide. i hope it's ok with you - that way people won't have to pay 40 $.
the only beef i have with you is the fact that i wish you had done this 2-3 weeks earlier - that way i wouldn't have had to dish out 40 $ for my cid unlock. haha jokes
You're truly a hero based on the desperate need for a free cid bypass.
Better late then never - Thanks once again for your contribution to the forum..

Well, I haven't got yet my SPV E600 (S620 from Orange), since it's on the mail, but I'd like to thank you for this great tool.
Keep the good work

hey bro, but can we try the flashing-method to unlock our phones?? I have one here, im goin to try now!!

Guys,
It's still far too early to celebrate a triumph...
The only one in this thread who tested was phlipse and I'm not so sure if he actually flashed a ROM. And in the other thread there are two guys who also report results which are not correct.
At least it is unlikely that you can damage your device with running the USPL.

tramuyo said:
hey bro, but can we try the flashing-method to unlock our phones?? I have one here, im goin to try now!!
Click to expand...
Click to collapse
If you mean SIM unlock your phone, then no it won't help you with that.

i'm going to give it a try as soon as the ROM finishes downloading. i'll update the post with my results. i have a tmo wm6 rom on there now and my phone is cid locked. at least im assuming so since i get the invalid vendor id when i tried to install the generic rom last time.
EDIT:
So far so good! Looks like I am up and running on the generic ROM. Thanks Jocky!!!

I just got confirmed in the other thread that the USPL works fine for flashing *any* official Excalibur ROM. It's not yet sufficiently patched to flash cooked ROMs.

Excuse my ignorance but I want to know if this procedure serves to me and as I execute it, I I have one htc s621 with WM5 ESP and actualize with
HTC_S620_SPA_1.27.412.1_ 4.1.13.44 _02.94.90_Ship after doing it I fail wifi, this that they indicate now will recover wifi.
greetings

nice work dude

pof said:
nice work dude
Click to expand...
Click to collapse
Thx pof, major credits go to you man.
And have fun with your kaiser

jockyw2001 said:
Thx pof, major credits go to you man.
And have fun with your kaiser
Click to expand...
Click to collapse
Thanks to all of you! Seriously fantastic, can't wait to try it out!

but the "DIY Unlock-and-flash" thread, can we apply this method?? Its a sim-unlock and cid-unlock

finally done!
thanks for your work....

Warranty Return Tmobile uk

Does anyone have a link to the default hardspl , radio rom and rom for tmobile uk as need it for a warrantly return. I did a quick google but could find it.

lohap said:
Does anyone have a link to the default hardspl , radio rom and rom for tmobile uk as need it for a warrantly return. I did a quick google but could find it.
Click to expand...
Click to collapse
Try with the Forum search tool. You can find out more by reading the Announcement in the thread!

Found the rom just wondering what hard spl verion it should have on it and if anyone has a copy also the stock tmobile rom is at http://forum.xda-developers.com/showthread.php?t=406327

Just wondering if anyone knows the version of the spl that tmobile ships with.

lohap said:
Just wondering if anyone knows the version of the spl that tmobile ships with.
Click to expand...
Click to collapse
good question. I would like to know too

I have phone the oem spl at http://forum.xda-developers.com/showthread.php?p=2324837#post2324837 just need to know the version to install now

Don't worry. I returned my previous phone with a Dutch T-Mobile ROM and they didnt notice. They just reflashed it / swapped it out....

well tmobile pulled me up on a flashed n95 and said it wasn't in warranty so dont want to risk it again.

My friend had 1 and when i flashed hard spl for him his was on 1.37
Just put that rom and the 1.37 stock spl and it will do the job.
Just 1 quick question why do you want to return the diamond? any problems?

returning it for the touch pro cant stand the crap battery life. Plus had a vario 3 and cant get on with out a keyboard.

lohap said:
returning it for the touch pro cant stand the crap battery life. Plus had a vario 3 and cant get on with out a keyboard.
Click to expand...
Click to collapse
Sorry to go off topic but just on Monday I asked UK T-mobile about the Touch Pro and they had no idea of availability. Are you suggesting they are now available?

i rang up today i they said they had them in but some of them called it the vario 4 or some called it the vario dimaond, but they said it was 89 quid on flex 35

lohap said:
I have phone the oem spl at http://forum.xda-developers.com/showthread.php?p=2324837#post2324837 just need to know the version to install now
Click to expand...
Click to collapse
are those SPLs the same used in branded devices or just the stockSPLs used by HTC?
or am i getting something wrong
sry for offtopic^^

kikakeule said:
are those SPLs the same used in branded devices or just the stockSPLs used by HTC?
or am i getting something wrong
sry for offtopic^^
Click to expand...
Click to collapse
SPLs are HTC produced.
No operator has it's "own" private SPL (afaik).
So SPL version 1.01 (random number) is exacty the same for all operators.

okay, so i'm not realy into all this hardspl-stuff ;D
i thought it was also providing me from flasing original HTC-Stuff on branded phones ;D
sry for newbie question its my first WM
but thank you for stating this out ;-)

kikakeule said:
okay, so i'm not realy into all this hardspl-stuff ;D
i thought it was also providing me from flasing original HTC-Stuff on branded phones ;D
sry for newbie question its my first WM
but thank you for stating this out ;-)
Click to expand...
Click to collapse
Hard SPL won't allow you flash any other SPL..
You'd need a Soft SPL (sSPL) to do that.
Basicly you take the Hard SPL kit.
Replace the hard-SPL nbh with a factory-SPL.nbh and flash that.
(don't know if anybody has posted any "factory-SPL.nbh" for diamond yet)
After flashing the factory SPL you can reflash your shipped ROM to bring the device into Factory condition.

okay so i mixed up with soft and hard spl...
so thanks again, now i got it!(i hope ;D)