Related
Hi i've found in Toch package one film with the same shape of display,someone know if this are spare part or is additional protection and should be placed?
Today my friend show me his Htc touch with this "film" placed and so is start discussion with him about the use destination.
Thank you in advance.
It has to be placed as it is called a screen protector. Not using one would lower your PDA resell value has you will probably get scratch on your screen after a few weeks.
Be carefull when setting this up, as it need a very clean screen, and a dust (nearly) free environment. A bathroom after a hot shower is the perfect place to set this up.
Yes, it is a screen protector. It is a bit ticky to fix. To make it easy to align you may sprinkle some water on the adhesive side and apply to the screen and align. Gently press out thewater with a stiff paper and also to displace air pockets. If some water droplets still remain under the sheet do not bother. It will all dry out within 3 days and result in a clear bright screen.
Thank
thank guys, was thinking is spare part because the default protections of display look like removable and so i've supposed replacement part.....but wasn't
Ok just placed
I'll have mine by the end of the week.
I store mine in my pocket and it seems the protector would peel off from repeatedly taking it in and out of your pocket since the screen is flush.
Anyone have any experience with this?
Does anyone knows if these HTC protectors (not some cheap 'fits all' protector) can be bought seperately? I applied mine right after i've got my phone it but was a bit sloppy with all the excitement and when re-fitting it some dust got underneath it, leaving me small airbubbles. If anyone has a link to how/where, it'd be much appreciated.
you can remove it, wash with some soap and then apply it once again, no need to buy a new one.
The HTC ones can be removed, washed and re-applied too? Can someone confirm this, coz I only read this could be done with the better ones from expanys or something
where to buy protector film?
T-mobile told me to go to dangaard.com
but i can not find the accesory's for the touch and the site is only for store's
so i went back to the the store asking if they can order the screen protectors for me the did not want to order it for, but i got one extra from there demo model, so my tip is.. go to shop and ask if they have spare protector from the demo model
How about the exim screen protectors? I have heard that those are "high quality" films... (pda-now.com)
expansys has some good ones, PPCTech and ORA: http://www.expansys.com/a.aspx?i=149713&atype=SCREPROT
Proporta ones are decent too www.proporta.com
Wondering if anyone try this
http://cgi.ebay.com/CP-FULL-BODY-SC...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Really want to know how good they are, they claim to be totally protective. I am a bit skeptical, any thoughts?
I have been very happy with these skins from Boxwave. Very easy to slip on when needed. Used these with my Trinity as well. I have not tried the ones with the cover. The Touch with skin is still smaller than the Trinity.
http://www.boxwave.com/products/flexiskin/flexiskin-htc-touch_2727.htm
Edit:
Just noticed they offer a Skin + ClearTouch screen protector package
http://www.boxwave.com/products/bun...skin-and-cleartouch-bundle-htc-touch_2727.htm
This is something similiar to what I post earlier, they warrant for the life of your device that you will never get a single scratch on it after you provide their full body protective film. Wouldn't this be cool, without the bulk of a case, yet, still achieve the same protection. If anyone have a chance, browse thru their site ,they have a video demonstration to show u the force thatf film able to withstand.
http://www.shieldzone.com/item_description/HTCTOU.html
Wondering if anyone have experience with it.
Seed123 said:
The HTC ones can be removed, washed and re-applied too? Can someone confirm this, coz I only read this could be done with the better ones from expanys or something
Click to expand...
Click to collapse
I'm interested to know this too, is washable?
Some photos...
I personally don't like the front cover, the shiny effect doesn't look right in this phone (at least for me), the back cover is fine....
The installation is more or less easy, after some minutes the covers really stick to the phone, if you don't like the result you can remove very carefully the covers, wash them and repeat the process again
Pros:
- Removable and washable.
- Resistant (apparently).
- Inexpensive.
Const:
- A bit shiny for my taste.
- Good for scratches but not to drops
--------------------
Talking about the original HTC protective film... Yep! it is washable
What the.....CONDENSATION!!!!!
thaihugo said:
It has to be placed as it is called a screen protector. Not using one would lower your PDA resell value has you will probably get scratch on your screen after a few weeks.
Be carefull when setting this up, as it need a very clean screen, and a dust (nearly) free environment. A bathroom after a hot shower is the perfect place to set this up.
Click to expand...
Click to collapse
man! are u really serious. i mean a bathroom and especially after a hot shower wud be the last place i wud attempt to do something like sticking a protective film on my PDA. i mean think a little science man. after a hot shower condensation [stage when the vapor above cools back to liquid] is surely a threat inside a bathroom, and while you try to stick the film, condensed vapor or mist to be precise might come in between your pda and the film. then all you will ever have is a smudged all white screen which you cant wipe off even, cos its between the layers.
so i m jus telling you cos i had seen a lot of incidents like this specially where hot vapor just cooled off is around!!!!!
No harm done! Just my scientific mind thinking a lot!!!!!!!
.....
i did a post some days ago about shieldzone. i used the invisible shield for a couple of days and the only thing thats really terrible is the reflection of the cover, as you can see in the pix abough.
so i searched again for a good display protection and bought a product from 3M, named vikuiti, armr200. for me its the best i ever saw.
# Anti-Fingerprint Layer
# 2 times Anti-Reflection Coating
and a very strong material.
i tried a lot to scratch the layer, but it was not possible.
Look at this, its a german site. if you google for it you'll find a site in your language for sure.
http://www.schutzfolienscout.de/vikuiti-armr200-schutzfolie.html
I have the 3M Vikuiti, armr200 for my Fujitsu P1610. It works quite well, not totally clear like those crystal clear type films, so you will lose some contrast and clarity, but for anti-reflective, it's the best you can buy. (and it's quite pricey).
One bad thing is that it reduces outdoor visibility quite a bit, you'll need to crank your backlight for outdoor use.
And it still shows fingerprints, actually they are quite noticeable due to the AR layer, but it's much easier to clean than other AR coatings.
One thing though, unless 3M is going to make one specifically for the HTC Touch, it will be a PITA to cut to the proper shape, since the clear cover is not a rectangular shape.
ayyu3m said:
man! are u really serious. i mean a bathroom and especially after a hot shower wud be the last place i wud attempt to do something like sticking a protective film on my PDA. i mean think a little science man. after a hot shower condensation [stage when the vapor above cools back to liquid] is surely a threat inside a bathroom, and while you try to stick the film, condensed vapor or mist to be precise might come in between your pda and the film. then all you will ever have is a smudged all white screen which you cant wipe off even, cos its between the layers.
so i m jus telling you cos i had seen a lot of incidents like this specially where hot vapor just cooled off is around!!!!!
No harm done! Just my scientific mind thinking a lot!!!!!!!
Click to expand...
Click to collapse
I wouldn't worry about it, I've used the steamy shower "poor man's clean room" technique many times, never had an issue with condensation stuck under the film. If anything, any liquid will help to avoid air bubbles and can be squeegeed out. Some films (namely 3M's paint protection films) require liquid to install properly.
A bit of caution when picking out screen protectors
I had to cut the edges on my AT&T screen protectors due to the nature of the soft back which when pressure is applied to the front causes lifting on the screen protector's 4 corners. The dimensions are fine but the radius is too small for the corners causing them to protrude ... just cut them a little but I would have preferred to have 100% perfect screen protectors instead of half assed ones from AT&T ... why am I not surprised.
sentinel79 said:
A bit of caution when picking out screen protectors
I had to cut the edges on my AT&T screen protectors due to the nature of the soft back which when pressure is applied to the front causes lifting on the screen protector's 4 corners. The dimensions are fine but the radius is too small for the corners causing them to protrude ... just cut them a little but I would have preferred to have 100% perfect screen protectors instead of half assed ones from AT&T ... why am I not surprised.
Click to expand...
Click to collapse
I purchased the same protector. I have the same issue as well. Makes it look really cheap with the corners sticking up.
I had that, plus since I am opening mine a LOT for hacking, the bottom looks like crap.
Looks like I am going to replace the protector within a week of getting the phone.
Just wrap the whole phone in plastic wrap with the back off. Then slip it on.
Bad idea most likely, but it would be funny if it worked well.
same issue. Trimmed the corners. It doesn't look that great, but doesn't peel up when i hit the corner on something. I'm on the third protector already. First one i screwed up the orientation and got dust under it when fixing. second peeled up when i hit one of the corners.
must be those poor quality screen protector. there us not much of an option atm. i would rather get a HTC HD mini screen protector and punch a hole on it.
I just had Ghost Armor put on my iPhone 3G (which I'm handing to my daughter when my Aria comes in). It's pretty nice, but the Aria isn't showing up on their website yet. And you would only really want to get the screen done, since you open up the phone to get to the battery and the SD Card.
Yep, I cut them carefully and used the scotch tape method to get perfect placement.
-------------------------------------
Sent via the XDA Tapatalk App
sentinel79 said:
Yep, I cut them carefully and used the scotch tape method to get perfect placement.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Can you elaborate on the "scotch tape method"?
I ordered invisible gadget guard from amazon. Havent put it on yet, but that packaging sure makes it look impressive.
Before separating the films I placed tape to use as handles to apply the protector flat (instead of holding it).
Then after layed down on the screen pulled up and slid tape underneath to attract any particles which cause bubbles. Slide with sticky side face up so it pulls from the protector's sticky film (rarely do the particles stick to the screen itself).
Sent from my HTC Liberty using XDA App
Has anybody noticed the quality of these are not that great?
Have had on for 3 days. There are a LOT of scratches on the protector itself. I usually keep phone in jean pockets with a wallet.
Anybody plan on trying the Amzer ones, although I have heard their quality may be dubious too for the n1.
Shad0wguy said:
I ordered invisible gadget guard from amazon. Havent put it on yet, but that packaging sure makes it look impressive.
Click to expand...
Click to collapse
I ordered this, and it shipped today. I got my 8 GB card in the mail today, too. I kind of wished I had gotten a 16 GB card, since my whole music collection is about 8 GB. But I may pick up another 8 GB as my "backup film roll" at a later time.
Donatron said:
I purchased the same protector. I have the same issue as well. Makes it look really cheap with the corners sticking up.
Click to expand...
Click to collapse
I can't believe I didn't figure out this solution earlier. Obviously, trimming the excess on the corners would solve the issue, but I wasn't comfortable using a razor blade to make the trims. But just 5 minutes ago, it occurred to me to use a nail clipper (while already installed on the phone, and the back plate removed). Worked perfectly, was super easy, and did no damage to the phone.
Yeah that didnt occur to me either. I used small crafting scissors.
Sent from my HTC Liberty using XDA App
Same thing happened to me, just on the bottom corners though, but as soon as I put my case on it covered up those bubbles, cant even see it. Quality of the protector seems to be decent. I used a universal one prior and it was ****!
I ordered the stealth guard though for the phone (full body protection) just now so when that comes I'll let you guys know how that works out as well.
I used the Invisible Gadget Guard that someone else mentioned (got it off ebay though, not amazon, it's the exact same one however). The quality of it is definitely top notch, I've had it on for a little over a month now and it has no scratches/marks that are visible without actually looking for them and even then there are minimal and very minor ones. My one complaint with it is the top two corners did start to peel a bit, I ended up peeling it up a tad and cutting them (with difficulty, this thing is tough!) and reapplying that part and I haven't had a problem since! I do have a few blemishes down the left side due to my clumsiness during the initial applicaton, but the case covers it for the most part
i tried the invisisheild and did not like the rubbery feel, got at t sheild it is a hard plastic and fingers slide much better, yes i had to trim but no big deal there. all you have to do is put the protector on the phone with back cover off, then take a new sharp razor blade at about 50 degree angle to the edge of glass and trim excess off. 3 months now and have not lifted any corners. these are much better than the rubber vinly covers that tend to stretch and need trimming as well.
So I had the maximum cover on my phone. BUt it was an awkward fit, the slim side panels fell off. The back covers I had to cut a line down the middle to get it to fit on the curve. The corners where I had the slits eventually came loose and flapped about.
But I left it all on untill I got fed up after it turned my nice white phone a lovely shade of brown, so now it's currently defenceless apart from a cover on the screen.
Anybody know what the full body protection is like?
It has less parts but looks like the back may be a better fit. I get a free replacement from zagg but wondering which one poeple recomend?
On an other note anyone change their phones entire outer cover? fancy a change to a black phone!
http://www.ebay.co.uk/itm/130553746...AX:IT&_trksid=p3984.m1423.l2649#ht_1155wt_991
I would get one with just the back cover but then the silver tones from the front won't match. Unless someone can anyone reccomend one?
I've looked at the phone and it appears to take off the front you need to unscrew a screw which has a "void warranty" sticker over it, but guessing I've done this already with changing the OS to cyanogenmod.
I have the full body Zagg cover, pics here: http://capableandroid.blogspot.com/2010/10/zagg-invisibleshield.html
After almost an year some corners have come loose and filled with dust, but the middle and bottom parts are ok.
As for the case.. I can`t comment, I have a brown-grey one and I`m fine with it. (i still use a gel case, just in case.)
Looks different to the one I had. I see you have no protection over the corners, for my case I have to make a slit over them so the case was eventually overlapped. Mine has only lasted 6months...if that. Was horibbly discoloured. It's done the job though. Shame about the odd bits that havn't been protected. Never noticed the marks before since I took off the old shield.
I bought the Zagg invisible shield maximum cover but havin't applied it yet, doesn't sound very good. Is the screen protector ok and is the fluid you use to apply it safe, can it stain or discolour the phone, thanks.
ricky20 said:
I bought the Zagg invisible shield maximum cover but havin't applied it yet, doesn't sound very good. Is the screen protector ok and is the fluid you use to apply it safe, can it stain or discolour the phone, thanks.
Click to expand...
Click to collapse
The fluid is save. If you, by any change, get fluid IN the phone, just leave it to dry for a day or two before putting in the battery.
OK, thanks for the advice.
When i bought my HTC One Stealth Black, i made sure that i got a perfect model (no defects). I took about an hour in the shop examining all the black HTC One's (they agreed to open 3 boxes for me) before i finally made up my mind. I paid for my phone off-contract and went home perfectly happy with a 801e model (it also has a sticker on the side of the phone that says UKR and on the box as well, so i guess it's from Ukraine and i got a 3-pin power adapter in the box together with the standard 2-pin charger plug) and also got a free TPU case with screen protector, as gift from the shop. Well, i put my phone in the TPU case as soon as i got home for fear of any drops/bumps/scratches, put it in my jeans pocket and went through the rest of my day moving around. Later that afternoon, i pulled the phone out of its case to touch the cold aluminium back and to my horror, i found a scratch (there were no scratches whatsoever before) that matched the contour of the TPU case around the camera. The scratch is around the flash.
Conclusion: The cheap unbranded TPU case seemed to fit the phone snugly but apparently not, as the constant movement and rubbing of the phone within the TPU case from inside my jeans pocket had caused the sharp edge of the TPU case to slowly erode the paint coating. It's a good thing that i noticed it after only one day usage or the etching would have definitely gone deeper, possibly even exposing the aluminium colour after a couple of days. It says "nothing but the best" on the packaging of the unbranded case, which is ironic.
So, my advice (and the reason for my endless rant in this post): stay away from cheap TPU cases, even if it says TPU, which might be true about the material itself but the fact of the matter - without a tight fit of the phone inside the casing, the resulting inside friction between the phone and its casing will damage your phone, causing the paint to wear off. This is probably not applicable to those of you who chose/use the Glacial Silver HTC One, since any scratch will probably not show up. But with time, the constant friction might cause the scratch to become visible. I've attached pictures so you can understand why i'm *****ing about my One By the way, i apologize for my dirty camera lens.
Lesson learnt - i've already ordered 3 casings (the best i could find after hours of searching, for cases that offer a balance between compactness v/s protection); Cimo Grip Back Case Flexible TPU Black, Otterbox Commuter Black and UAG Aero. I wouldn't bother with any other cases, unless you want even more protection, then you should be satisfied with the Otterbox Defender case.
My friend .. ANY case you put on the phone has the potential to scratch the aluminum on the edges. It is simple physics: if you get some dust/sand in between the case and the aluminum (where in other locations can the dust/sand/lint settle ?) any slight pressure or movement of the case will cause a small surface defect. You can not hide from that and you can not prevent that.
Live with it ! It is called reality.
electronical said:
When i bought my HTC One Stealth Black, i made sure that i got a perfect model (no defects). I took about an hour in the shop examining all the black HTC One's (they agreed to open 3 boxes for me) before i finally made up my mind. I paid for my phone off-contract and went home perfectly happy with a 801e model (it also has a sticker on the side of the phone that says UKR and on the box as well, so i guess it's from Ukraine and i got a 3-pin power adapter in the box together with the standard 2-pin charger plug) and also got a free TPU case with screen protector, as gift from the shop. Well, i put my phone in the TPU case as soon as i got home for fear of any drops/bumps/scratches, put it in my jeans pocket and went through the rest of my day moving around. Later that afternoon, i pulled the phone out of its case to touch the cold aluminium back and to my horror, i found a scratch (there were no scratches whatsoever before) that matched the contour of the TPU case around the camera. The scratch is around the flash.
Conclusion: The cheap unbranded TPU case seemed to fit the phone snugly but apparently not, as the constant movement and rubbing of the phone within the TPU case from inside my jeans pocket had caused the sharp edge of the TPU case to slowly erode the paint coating. It's a good thing that i noticed it after only one day usage or the etching would have definitely gone deeper, possibly even exposing the aluminium colour after a couple of days. It says "nothing but the best" on the packaging of the unbranded case, which is ironic.
So, my advice (and the reason for my endless rant in this post): stay away from cheap TPU cases, even if it says TPU, which might be true about the material itself but the fact of the matter - without a tight fit of the phone inside the casing, the resulting inside friction between the phone and its casing will damage your phone, causing the paint to wear off. This is probably not applicable to those of you who chose/use the Glacial Silver HTC One, since any scratch will probably not show up. But with time, the constant friction might cause the scratch to become visible. I've attached pictures so you can understand why i'm *****ing about my One By the way, i apologize for my dirty camera lens.
Lesson learnt - i've already ordered 3 casings (the best i could find after hours of searching, for cases that offer a balance between compactness v/s protection); Cimo Grip Back Case Flexible TPU Black, Otterbox Commuter Black and UAG Aero. I wouldn't bother with any other cases, unless you want even more protection, then you should be satisfied with the Otterbox Defender case.
Click to expand...
Click to collapse
I had the black for a while. I think that it is prone to anything. Apart from light scratches sustained by using the double dip case, the camera cut out of an incipio case left a watermark on it as well. Now using a silver one and not a single scratch. Rotating between three cases.
Forgive me if I'm wrong, but isn't anodized AL WAY harder than TPU?
If it is, then isn't it PHYSICALLY IMPOSSIBLE for the case itself to scratch the phone?
Either a) there was dust/dirt in the case or
b) it's not a scratch, try wiping it with mild soap, water and a soft cloth.
Interesting thread...you were writing this 3 years ago, I just picked up two pristine condition used m7s, both with nearly all day batteries. Yesterday I got two cases of the first type described below.
I just love these phones so much. They are such a huge upgrade from any phone I have had since I had a droid 2 from motorola before knowing anything at all about these nifty little computers.
I just came in here to say that I will be getting the hard glass protection from now on for every phone I get. Would also recommend to anyone as it is far superior to foils.
Also three good types of cases:
- the hardened shell with no button coverage, and brushed metal exterior
- the clear plastic back, black bumpered semi hard with plugs and accurately designed button enhancers (distinguished by black surface lines on the back coming in from upper and lower edges about a cm each, towards the antennas)
-and believe it or not I really liked the ordinary rubber sort of cases with wavy line down the back and dual texture... as long as they have button covers. But those wouldnt be good for people who have a hard time with the buttons already.
Just picking up these phones starting in June 2016...has made my android experience so much more enjoyable...now being able to play top 3d heavy performance requiring games...and so much different development for the phones.
here's a couple pics of my phone cases I was describing. no scratches whatsoever on the two used like new phones, although its a used case on goldy. the other phones are for family and such, but also loving the cases on them. red looks good in red but it obscures the back... so take clear
kruc Ire said:
here's a couple pics of my phone cases I was describing. no scratches whatsoever on the two used like new phones, although its a used case on goldy. the other phones are for family and such, but also loving the cases on them. red looks good in red but it obscures the back... so take clear
Click to expand...
Click to collapse
Link please?
Saf98 said:
Link please?
Click to expand...
Click to collapse
www.urbandictionary.com/define.php?term=spinner
Are there any case haterz on this forum, who run their phones without any kind of cases / back stickers etc ?
Could you post some photos, facts, knowledge how well the phone stands everyday usage ?
I have been using case since day one, but i just can't stand it anymore. Did I buy alluminium phone to put it in rubber case or stick plastic sheet of foil on it to lose the feeling of alluminium ? No !
I drop my phone very rarely, actually i have never droppped it (knock knock), only time it hit ground it was clumsy bird's (jokin clumsy friend's hands) fault. My only concern is lens protector. On one side its nicely hidden in the rim, but at the other lens cover is protruding just a very litle bit. I am attaching picture to illustrate it a bit. It is side look.
There's a "hole" in the phone body, so the lens should be all hidden / drown and there should be 1 milimeter gap, when i place phone on table. On one side there is, on other lens is in line with body.
Grey - phone
White - gap for lens cover
Black - lens cover
Mods, please do not delete this topic - this has already happened in past (moved to accesories thread), but it get lost very easily, i try to debate with users without accesories.
Thanks
i did for apprx 4 months when i first bought the device, now i'm using crystal clear case to not to hide devices body.
i bought a case after i saw scratches on camera lens, luckly camera lens got replaced after service for red tint.
also shiny exposed alumium around the device got scratched and deformed a bit.
I also am not a fan of big bulky cases. One of the main reasons I bought this phone is because it is so damn beautiful (compared to most other phones). I've always joked about how iPhone fans typically rave about how "sleek" and "thin" their phones are, yet they walk around with them wearing the equivalent of a down-filled parka that is anything but "sleek".
I did compromise a bit, just because I want to keep my phone looking nice. I found the Cimo clear case. It is very thin, and very clear. It has just enough of a "lip" around the edge so that the screen of the phone won't contact the ground when it is lying down (or dropped on its face). The soft rubbery cushioning should also protect against dings on the corners and back, as well as prevent scratches. All without sacrificing the beauty of the phone. I paid $10 on Amazon for it.
NEH,
I did not buy a unibody aluminium finish phone to hide it behind chinese plastic covers. Thats not my style. I have pretty much the same type of use like yours. The only thing that has happened with me is that the beats audio red sticker at the behind bottom plate is now fading off. Nothing else. Just keep keys/card holder and coins in other pocket. I dont think you need a plastic cover.
When I had my One I used the HTC hard shell - minimal design but clear so you could still see the phone. Best case I had IMO
http://shop.emea.htc.com/uk/p_htc_store_product.aspx?i=251537
Whether you can still get it is another question
I've been using this case works well still shows the phones great looks and protect it all around.
HTC One
Guys, thanks for all the replies.
But this thread is strictly about naked devices - no cases at all !
well ii put a case on it.... next time its still usable years down the road
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
jaqual said:
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
Click to expand...
Click to collapse
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
never ever use a case defeats point of having such a wonderful design,have a leather pouch when not in us and just treat it like a baby when in use 6 months on still pristine not a mark
Sent from my Transformer TF101 using XDA Premium 4 mobile app
remusator said:
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
Click to expand...
Click to collapse
My lens cover is slightly recessed, so no, not like you, but haven't had any damage to it. No pouch or anything, just keep it in my pocket with my change.
Sent from space...
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
[1] said:
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Click to expand...
Click to collapse
this is how i use mine. transparent cover over the back which i only put on because the aluminum is actually very slippery for me and the clear skin provides better grip so i dont drop it. clear cover over the screen and im good to go. few small areas around the front bevel where the blue has worn away but other than that its prefect. i never use a case, defeats the purpose of having a thin phone.
I Have been using it without cover, but in December it has fallen on the road so i ordered some cheap one from the e-bay.
So now, i am using it with cover, but i lost that great metal feeling of the phone.
Here is an example with and without cover
http://i.cubeupload.com/KydqLb.jpg
I don't use a case at all makes it easier to use the volume and power button
Sent from my Verizon HTC One using Tapatalk
I use no covers, just matte screen protector (I like the way my display looks with it). Bought it in June 2013. It fell on the floor several times, it got only one scratch on the top (on the lright corner), but it still looks amazing! As it's always in my pocket, lately the "beats audio" logo on the back is going away slowly... but i use nothing to protect it
NxNW said:
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
Click to expand...
Click to collapse
+1. Dont know how long I would keep the phone. But while I have it might as well enjoy the quality feel of it.
My HTC One is about two weeks old. I love it so much, I can't bring myself to cover this baby up.
Also, I am paying for a warranty, so if anything happens to it I'll get a new one, or maybe the M8 if they run out =D