Hi all,
Since the upgrade to the latest version of Wm6 is my BT car set no longer working well with my MDA vario II
most of the time there is no sound on the car speaker.
connection is okay.
Before the upgrade from Wm5 to WM6 BT was working fine.
Car: Citroen C4 Picasso
PDA: MDA Vario II
Rom: Schap 3.60 (08/09/07)
Radio:1.47
Same car, same problem... (C4 Picasso Bluetooth Car Kit)
There is no solution for now... (back to WM5)
Related
hi
if i instal bt gps tom tom my i-mate pda2k can`t connect to nokia car kit, but without tom tom navigator car kit conection is fine
rom 1.22.00 wwe
radio 1.12.00
bt 1.0.0 build 3500
Try deselecting 'Recieve all incoming beams' under 'Settings;Connections;Beam'.
tom tom
i trided but didn't worked
i installed different software gpsinf and it worked fine
BT gps and nokia hands free
What vs of TT are you running if vs3 roll back the GPS driver to vs 2.06, alternativly some people have had luck using TT vs3,07 I tried various vs3 settings and never got it to work the headset will pair and connect but when TT vs3 is loaded the headset will pair but fails to connect - I use TT vs5 which works but not with BT GPS and Headset tried it and it worked until you treminated call and at that point you lost GPS - so I went wired for GPS and all is fine. Mike
tom tom v3
my tom tom v3
i would upgrade to v3.07 after my holidy
Give it a try but the only way I got the XDAIIs to do what I needed was to ditch the BT GPS and go with wired, combined with BT headset - had no problem sinse then
have seen the A2DP upgrade for the Magician, works fine on my wife's qtek s110 but has anyone seen a bluetooth upgrade for the k-jam? (WM5)
have tried the upgrade on the k-jam (wizard) but although i can pair and select audio streaming there is no sound from either the headset or the k-jam until i un-install the upgrade.
Hey there,
Im new here and my first problem is:
I've got a Parrot CK3100 and a MDA Vario II (HERMES) The HERMES is running WINDOWS Mobile VI Black 3.01, and the Parrot had the Latest Software Update! Pairing is no problem, it stays connected but my problem is.. the sound does not run over my speakers... and my parrot mic, but over my HERMES.. the radio does mute, so that's pretty strange. Please tell me how to get this baby to work on my Parrot CK3100
Problem Solved
Solved by installing new ROM Black Dymond 3.5 by JasJamming! Thanx
All,
I am experiencing a very annoying Bluetooth problem and was hoping someone could help me.
I have a MDA Vario 2 running the latest HTC WM6 rom. I have a Holux M-1000 bluetooth receiver that is paired with my MDA and works perfectly using TomTom6
Now when I pair my Nokia BH207 bluetooth headset with my MDA and switch it on the MDA no longer able to communicate with my Holux GPS receiver. If I switch the Nokia headset off suddenly the phone is able to see my Holux. It is like the Nokia headset is blocking all other bluetooth devices from talking with my MDA. Why is this and how can I fix it so the MDA can communicate with both the Nokia BH207 and GPS at the same time?
Thanks
Msuk
To all, I`ve just updated my Artemis with WM6, now I`ve the following problem. When the Artemis is connected via bluetooth with my car handsfree unit, there is no sound output form Tom Tom. If I swich of the bluetooth connection ist works. But that can`t be the solution, because with WM5 it was working.
Thank`s for your help