All,
I am experiencing a very annoying Bluetooth problem and was hoping someone could help me.
I have a MDA Vario 2 running the latest HTC WM6 rom. I have a Holux M-1000 bluetooth receiver that is paired with my MDA and works perfectly using TomTom6
Now when I pair my Nokia BH207 bluetooth headset with my MDA and switch it on the MDA no longer able to communicate with my Holux GPS receiver. If I switch the Nokia headset off suddenly the phone is able to see my Holux. It is like the Nokia headset is blocking all other bluetooth devices from talking with my MDA. Why is this and how can I fix it so the MDA can communicate with both the Nokia BH207 and GPS at the same time?
Thanks
Msuk
Related
hi
if i instal bt gps tom tom my i-mate pda2k can`t connect to nokia car kit, but without tom tom navigator car kit conection is fine
rom 1.22.00 wwe
radio 1.12.00
bt 1.0.0 build 3500
Try deselecting 'Recieve all incoming beams' under 'Settings;Connections;Beam'.
tom tom
i trided but didn't worked
i installed different software gpsinf and it worked fine
BT gps and nokia hands free
What vs of TT are you running if vs3 roll back the GPS driver to vs 2.06, alternativly some people have had luck using TT vs3,07 I tried various vs3 settings and never got it to work the headset will pair and connect but when TT vs3 is loaded the headset will pair but fails to connect - I use TT vs5 which works but not with BT GPS and Headset tried it and it worked until you treminated call and at that point you lost GPS - so I went wired for GPS and all is fine. Mike
tom tom v3
my tom tom v3
i would upgrade to v3.07 after my holidy
Give it a try but the only way I got the XDAIIs to do what I needed was to ditch the BT GPS and go with wired, combined with BT headset - had no problem sinse then
I have a 2001 BMW E39 M5 in which I have retrofitted a Bluetooth module.
It worked fine with my O2 XDA Exec (and with my wife's Nokia 6310i), but I cannot get it to work with my new O2 XDA Orbit or my previous Vario II (HTC Hermes).
I have no problem pairing the phone, but when I ask the car to "Dial Name" or "Dial Number", it just says "Dialling" and nothing happens on the phone. Incoming calls are not picked up by the car either.
Anybody got an Artemis or Hermes to work in an E39?
Jet ware mobile might help - have a look into it
http://www.jetwaremobile.com
Recently installed new HTC WM6 Rom and all is sweetness and light......except.......When I accept an incoming call on the Bluetooth Motorola HF850, the first 6 -8 seconds are handled by the Orbit and then the bluetooth kicks in - trouble is the caller has hung up by then!
Tried deleting pairing and reinstalling....anyone with ideas?? Thanks.
Hi all,
I am facing the same problem with my Motorola car kit. Very annoying. I can receive calls and after 6-8 secs they can hear me, but I can not make a call, only mutes sound on both the headset and car kit. I have to select "Turn Off Handsfree" to get it to work... HELPPLEASEE!!!!!
Same exact problem here with Hermes - any ideas anybody?
The solution...
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
I have a partial solution:
I answer the phone on the PDA unit, not on the BT unit, and then I click the blue button on the BT car kit and the phone immidiately connects.
This connects much faster than the usual 10 seconds wait if you answer with your Car Kit button.
TangerineTractor said:
Try jetwaremobile.com - it worked for me on Moto and Siemens HF devices... free trial to see if it works...
Click to expand...
Click to collapse
Hi, this is my first post. I've the same problem with my vario ii (T-mobile) recently upgraded to WM6. Installed the program from jetware and the same problem still persists. Funny enough, it did fix the problem with voice speed dialer.
I've been talking to motorola about their hf850 and they don't have a clue. I used and old MDA Compact II with WM5 and that worked fine with the car kit. I downgraded to WM5 on my Vario II and since this morning my HF850 carkit has been woking as I would expect it to. I definitely think that the problem is with bluetooth on WM6.
I have the same problem with my HTC Tornado (Cingular 2125) with WM6.
Same problem here with Trinity & WM6 - maybe this is a Microsoft/Bluetooth stack problem... any other ideas?
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
Hi all,
Since the upgrade to the latest version of Wm6 is my BT car set no longer working well with my MDA vario II
most of the time there is no sound on the car speaker.
connection is okay.
Before the upgrade from Wm5 to WM6 BT was working fine.
Car: Citroen C4 Picasso
PDA: MDA Vario II
Rom: Schap 3.60 (08/09/07)
Radio:1.47
Same car, same problem... (C4 Picasso Bluetooth Car Kit)
There is no solution for now... (back to WM5)