Related
Hello,
I've just received my SPV M5000 and I'm loving it. However I do have a few niggles. Freezing, took ages to get skype to work, unable to install Tom Tom navigator 5.0.
I've heard that the imate Jasjar ROM is more reliable than Orange ROM.
Any information on the following questions would be much appreciated.
Does the imate ROM contain skype?
Where abouts can I locate the imate ROM?
How do install the ROM?
Can Tom Tom navigator run on the device?
Thanks in advance.
TomTom runs on the orange ROM. Its the installation that has problems, and that is to do with the installation package not liking WM5/Activesync 4
You can install TTN by copying over the 5 cab files manually and running them on the device, you will also want to find the 5.1 update cab.
If you do a search you will find the cab, and the information on this board. It took me 15 mins all in.
I know it doesn't answer your question, but might save you turning your phone into a brick!!
Also, are you on orange? If so, how the hell are you going to afford to use skype after the 3months 3g trial ends? :wink: :lol:
Thanks for that.
In response to your question. I won't really be using Skype over 3g. I will only use within Wireless Haotspots using WiFi.
As I am a complete thicky, would you be able to spoon feed me the installation of Tom Tom to my Universal. Where to install, what, etc and the upgrade?
Thanks in advance.
toptaggy,
I'm an irregular poster on here but found myself in the position of having a genuine registered copy of TomTom Navigator 5 and unable to use it on my M5000 having just upgraded from the M1000 and M2000.
Elsewhere on this forum, I found thie following which is a very helpful guide to installing TTN5 with Bluetooth GPS.
Hope it works for you too.
F
TomTom
There are 3 key steps in making TomTom 5 work on an i-mate JasJar with a Bluetooth GPS.
Many tips are scattered around in different Forums.
Here is a COMPLETE overview of what to do.
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the JasJar and launch one by one from there with the explorer of the JasJar.
You can install voices the same manner by copying the CAB files to the Jasjar (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
http://www.htcclub.net/storage/ppcupd510.rar
Extract and copy the files to a folder on the JasJar and install them from there.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Hi toptaggy
So far I was never happy with Orange ROMs. But I have a suggestion for you as long a realy good ROM is not avalable.
I installed the VGA tool. With this one the screen is much faster, specialy when turning the screen.
Than with the Total Commander CE the extended ROM is visible (just tip in the adress bar: Extended_ROM ). Here you can fist backup it and than remove unneccessary file as Orange ring tones etc. This will free up you some memory.
With this config my M5000 is working 50% faster as the standard out of the box.
A pitty is that the slider in the memory setting is missing as you had it in W2003 SE.
Cheers
What is the VGA tool and where can it be obtained from ???
agga said:
Hi toptaggy
So far I was never happy with Orange ROMs. But I have a suggestion for you as long a realy good ROM is not avalable.
I installed the VGA tool. With this one the screen is much faster, specialy when turning the screen.
Cheers
Click to expand...
Click to collapse
Hi dfens
as all other do it xda ftp - universal folder, there I found it.
Sorry, I don't have the exact link as I'm on holiday.
cheers
Hi
I've spent the past few days geeking with my MDA, using the wealth of info from this forum.
I tried the JasJar rom (too much [email protected]), and ended up with:
- XDA CE Rom (1.13.48 )
- Radio From O2 Rom (1.04.02)
- Minimal Stuff from XDA/MDA ext roms
Goal was to install with the least [email protected] possible.
Step 1 - Flashing The XDA Exec Roms
First flash with O2 XDA Rom, using the info available here: http://forum.xda-developers.com/viewtopic.php?t=32725
To sumarise the above...
- Get XDA rom from:
ftp://xda:[email protected]/Uploads/Universal/Shipped ROM/Xda_Exec_LaunchROM_v113139.exe
- Unpack the above using winrar.
- Plonk MaUpgradeUt_noID.exe in the folder where you unpacked the O2 rom (you can get this file from the ftp site, in the file: ftp://xda:[email protected]/Uploads/Universal/JASJAR_WWE_11353_137_10402.rar
You only need the one file!
- Disable activesync
- Put MDA in bootloader mode
- Connect to PC via USB, wait for hardware detection
- Run the file MaUpgradeUt_noID.exe from the O2 Rom directory on the PC
- Wait ;-)
- Once it restarts, do the usual CE setup, but do not let the extended rom install (simply soft reset at the prompt). If you have gotten past this stage, just hard reset again, and do the soft reset at the correct point!
Step 2 - Installing Progs From Extended Rom
- You'll now have an MDA with the XDA CE and Radio roms installed. It will need the appropriate patches installing from the XDA and MDA extended roms.
- To start, DL both extended roms:
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
- For info on what each of these roms contain, look at the following threads:
MDA: http://forum.xda-developers.com/viewtopic.php?t=32839
XDA: http://forum.xda-developers.com/viewtopic.php?t=32527
- You dont need all that ****e, I installed the following:
XDA:
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB (bluetooth patch)
MDA:
CAB-Customization-TMUK-Universal-01-03-04Aug05.CAB (Adds MMS Server Settings)
CAB-Shorcut-TMOENU-08Aug05.CAB (Adds MMS to outlook + installs some shortcuts which you can remove later)
Enable_VT_RTPlugin_0727_2_signed.CAB (Enables Video Calling)
Signed_UNI_TMO_Connection_112100.CAB (Adds 'T-Mobile Internet' and 'T-Mobile Internet CS' for GPRS/3G connection)
Stage 3 - Cleanup
- The CAB CAB-Shorcut-TMOENU-08Aug05.CAB also installs a links. If you dont install the cab TMO_UK_UI_0727_signed.CAB then these will be dead llinks. The 'clearvue pdf' reader is a part of this cab (but if you install it, you'll get all the other sh1te it contains also. I was not interested in the PDF reader, so I just trashed the dead links.
- There are two dead links in Programs (they'll be obvous by their icons. I seem to remember them being 'clearvue PDF' and 'EmailWiz' In Explorer, browse to /windows/start menu/programs and trash them.
- Several shortcuts are installed in /windows/startup. Trash the elatepushservice (I dont know what this does, but I dont appear to be missing anything!), sddeamon (this causes the prompt 'view pics on card' when you insert a card containing jpgs from digicam etc). DONT trash 'poutlook' as otherwise the MMS folders wont appear in pocket outlook.
- Install Pocket Mechanic, and use it to ditch bad registy keys and cleanup the notification que.
- Could also install the ext rom unlocker & Total Commander so that you can shove only the cabs you want into the ext rom (or use the space for somet more useful) See Here: http://forum.xda-developers.com/viewtopic.php?t=33638 (Cheers Buzz!)
Registry Hacks
Goto: http://wiki.xda-developers.com/index.php?pagename=Universal_Registry and pick some registry hacks to install. I did 'keys on today screen', 'disable start menu animation', 'change pocket ie', 'change fonts', 'change glyph cache' and 'change web hardware button' - to 'about:blank'
Goto:
http://forum.xda-developers.com/viewtopic.php?t=33515 and make the suggested changes to the cache settings. I found that this did speed stuff up, but since its only cache settings, it will only speed up stuff the second time you try and do it!
Soft Reset
Install Your Progs
I installed
In Internal Mem
Resco Explorer (+regedit +ftp) to replace the MS sh1te
Resco Pic Viewer (to replace the MS App)
Pocket Informant (case the built in stuff is useless)
Resco Audio Recorder
Resco Pocket Radio
TCMP Media player
Net Remote (to control my HTPC)
SPB GPRS Monitor (from MDA CDROM)
Zimmermann Pocket Hosts (essential for VPN use)
Small menu (so I can ruddy well close open apps!)
IPConfig
Pocket Putty (SSH)
On CF Card
Total Commander (to get to the ext rom)
WiFiFoFum (for free email on the move ;-)
Pocket Mechanic
Concluding
Machine is now both fast, stable and not full of bloat-ware. Have 22MB free storage, and 27MB free program memory.
Main Issue left is the time that machine takes to respond to an incomming call when its switched off. On the original MDA rom, I had 4 rings before machine actually rang. Now I have about 2.5.
Time for sleep! I'll read through this tomorrow and correct any errors...
Nigel
One essential point.
According to the publisher, Pocket Mechanic should not be installed to the SD-card, especially if you intend using any of Pocket Mechanic's functions against the SD-card - could lead to corruption.
Personally, I've installed (and run) many of the applications you've listed as "Internal mem" direct to the SD-card without experiencing any problems.
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
veletron said:
Hi
Aye, I have noticed oddities with pocket mechanic on SD card, but only when doing SD card benchmark, defrag etc.
I installed to internal mem cause its faster than SD card rather than any other reason, but I found issues with some resco apps running on the SD card also - specifically resco upgrade failed (could not install downloaded upgrade)
Nigel
Click to expand...
Click to collapse
I can understand Pocket Mechanic objecting when you defrag/benchmark the medium it itself is running from.
Haven't had any problems with Resco, but haven't tried the update facility.
velvetron
I am an o2 uk user... I am asuming you are too..
I see you installed the tmob cabs for interent and 3g connection... does this work on o2 or am i being stupid..
Which should I install please advise
magpie
Re: velvetron
magpie2000k said:
I am an o2 uk user... I am asuming you are too..
Click to expand...
Click to collapse
Nope I am a t-mob user. If you are with O2 then you wont be wanting to install stuff from the T-mob ext rom!!
Nigel
want to change dopod 900 (chinese rom) to o2 exec rom
is it feasible?can thr be any incompatibility?
where can I find JASJAR_WWE_11353_137_10402.rar ?
Hi,
I am gathering the files to perform the upgrade as detailed in this thread, however I can't seem to find JASJAR_WWE_11353_137_10402.rar.
Is there a better one to use now ? or should I keep searching for JASJAR_WWE_11353_137_10402.rar ?
In fact most of the links have moved ...
Thanks
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
Can you dump your extended rom and post on the ftp site?
I've tried installing the french version, but the UI won't install. Most odd...
I can't find the ROMS
I keep getting :
File not found
You tried to access the address ftp://[email protected]/Universal/Extended ROMs/, which is currently unavailable. Please make sure that the Web address (URL) is correctly spelled and punctuated, then try reloading the page.
Can any one point me in the right direction ?
I have a T Mobile (UK) MDA PRO, the wifi connection lasts for about 3 seconds, then it keeps trying, but failing.
These are the ROMs I'm after :
XDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/O2_XDA_Exec_Extended_ROM.zip
MDA:
ftp://xda:[email protected]/Uploads/Universal/Extended ROMs/mda_pro_eng_uk_extrom.zip
Thanks
Hi
Looks like someone has trashed the FTP site (again) all those roms have dissapeared. Hopefully they'll get restored... Did a backup exist??!
I'll search my laptop see if I have any of the missing roms
Nigel
Yup the FTP's missing practically every file...
I need the NO ID upgrade launcher file to flash my MDA Pro to XDA Exec please.
If anyone can upload it or send it me accross msn it'd be much appreciated
take a look at the last post :
http://forum.xda-developers.com/viewtopic.php?t=35123&highlight=
Morituri said:
Great bit of collating, does anyone know if the same can be performed on a M5000? Orange have a habit of needing things on there phone to work correctly. Also does anyone know what the following do on the M5000 ExtRom:
CAB-Customization-OrangeUK-Universal-01-05-15Aug05.CAB
CAB-Shortcut-Orange-19Aug05.CAB
cusTSK.exe
Enable_VT_RTPlugin_0727_2_signed.CAB
Signed_DiscoButton8.sa.CAB
Signed_Orange_SuspendResume.sa.CAB
Signed_Orange_UAString.sa.CAB
Signed_ORUK_Conn.sa.CAB
Signed_ORUK_Customize.sa.CAB
Signed_ORUK_HomeScreenReg.sa.CAB
Signed_ORUK_SoundSetting_USSDAlarm.CAB
Signed_ORUK_Version.sa.CAB
Signed_pIE_Fav.sa.CAB
Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
Signed_SSD_Shortcut_WWE.sa.CAB
Signed_SSD_WLanMgr_Orange_Icon_WWE.sa.CAB
Signed_UNI_pIE_View_Set.sa.CAB
UI_Orange_UK_0727.cab
UNI_BrowserPerformance.sa.CAB
UNI_Orange_2G3G_icon.sa.CAB
Would be a great help if someone did or could find out as I could then cherry pick what to install. I can take a guess at a few of them but I would like to be sure
Thanks
Click to expand...
Click to collapse
This is all I've worked out so far:
Signed_ORUK_Customize.sa.CAB
sets orange wap homepage
Signed_DiscoButton8.sa.CAB
GPRS disconnect button
Enable_VT_RTPlugin_0727_2_signed.CAB
Ringtone plugin, phone skin
UI_Orange_UK_0727.cab
The orange plugin on today screen???
Mat
Also, if anyone would like it - you are free to download contents of Orange M5000 extended ROM from my website:
www.compsoc.man.ac.uk/~matsmith/bobs/orange.zip
TT7 is available: http://forum.xda-developers.com/showthread.php?t=401691 Just thought some of you may not have noticed. It takes a while to figure it out but it is worth it. The software allows you to download 1 free map.
Here is a link for the cab file to tomtom7 http://rapidshare.com/files/124556122/TT7_Black.zip
You can download 1 free map from tomtom.com to test this software legaly
If you purchased a tomtom6 map it SHOULD work ok with this version no promisis tho
if not purchase a tt7 map from HTTP://WWW.TOMTOM.COM
DO NOT ASK WHERE TO GET MAPS
THIS IS NOT A WAREZ SITE
Nore will we discuss activation if you got genuine map you won't have to ask
where to get maps ?
just jokin...
Twinn said:
where to get maps ?
just jokin...
Click to expand...
Click to collapse
VELLY FUNNY
TT7_black works great, thanks! Maps off TT6 run also. Does anyone know were to find any car symbols???
hukje01 said:
TT7_black works great, thanks! Maps off TT6 run also. Does anyone know were to find any car symbols???
Click to expand...
Click to collapse
There you are... enjoy it!
xcforum said:
There you are... enjoy it!
Click to expand...
Click to collapse
Or use tomtom home.... and download what want from the TT site....
Thanks..........!
hukje01 said:
TT7_black works great, thanks! Maps off TT6 run also. Does anyone know were to find any car symbols???
Click to expand...
Click to collapse
Do I need to re.install them?
TomMuench said:
Do I need to re.install them?
Click to expand...
Click to collapse
Yes, but the installation will do it for you.
xcforum said:
There you are... enjoy it!
Click to expand...
Click to collapse
What are these?
In TT7 you can chance the blue arrow for a 'bmp' picture. So instead of the blue arrow, you will see a car.
Grtz..
Hello,
the link doesn't works. It is possible to save another ?
I am super interested in TT7 on my Artemis (P3300 in french)
I am looking for my side too.
In card, I had it: FR most major roads of WE V675 1409, does it work?
Gigi06 (sorry for my english, i'm french !)
=> I found this : http://www.4shared.com/account/home.jsp on this forum (my english is terrible !!)
ttn7
how do i use this file/ install it..can anyone help
Hello,
for the file .cab : from PDA
for the file .exe : from the computer
it responds to your question ?
Gigi06
ttn7
used the link to go to the download.found the cab file , then what?
sorry for being a bit slow on the uptake
ccafferty said:
how do i use this file/ install it..can anyone help
Click to expand...
Click to collapse
If you are asking about the file off xcforum, you have to place the ‘art map’ directly in “program files/navigator”. After that you can select the pictures in TT7.
ttn7
no i`m asking about the cab file for installing ttn7
ccafferty said:
no i`m asking about the cab file for installing ttn7
Click to expand...
Click to collapse
If the file is unzipped , copy the cab to the phone or memory card.
Press the cab and it should install.
Map TomTom 6
I have installed TomTom 7 downloaded the map for free and installed it - works.
Then I tried to use my old maps from Version 6 and it did not work. So, I re-installed the maps with TomTom Home and still he does not use the Version 6 maps.
Do I need to twist the registry somewhere or is there anything else I am missing.
Hallo
I have this gps :
http://cgi.ebay.co.uk/q-4-5-GPS-Car...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318
I have problem with TT7 im loosing gps signal every time i want change something in tt menu..
I have access to wince and i have wince image for this device... Can i change t(add) language from chinese to english??
Sorry for my english...
Hi m8,
I know this will not help you much. I have the same unit but with mio maps and trying to install tomtom 7 on it but whit no luck. Any chance you could explain tome how you got working? or made a copy of your SD car and upload. I'm so frustrated with it, spend almost 3 days and no luck.
Thanks for the help and SORRY I can't help you.
Cheers
Gyga
http://odsiebie.com/pokaz/876827---628a.html
Just unrar and copy that to sd card and choose tomtom navigator.exe in gps path. This tomtom is with polish language but you can change that in menu. You need maps 8 with 22 meta or 7 maps for this tt and activate with tt8_keygen2.exe for 8 maps and tt7_keygen.exe for 7 maps.
Sorry for my english...
You can try http://rapidshare.com/users/M9JTJL i think you can choose language with this one...
Problem solve
Hi yonasz,
I was able to fix the problem, but thanks for the upload.
This is what I have done:
I run a little scrip (TT7 Navigator.mscr) that will pop up the power settings window before TomTom run. This will keep you the chance to change the " Switch State to user idle " from 1 minute to never. You must be quick as it will stay open for about 5 to 10 sec. only.
To run this script you need a few files in your TomTom directory. I have create a TT7WinCE.rar with all this files. Ones you done you just remove only the "TT7 Navigator.exe" and the "TT7 Navigator.mscr" everything else leaved in there.
One more thing you need to edit the "TT7 Navigator.mscr" and point to your TomTom Directory TomTom Navigator.exe, use notepad for it. Here is how my looks:
Errorlevel ("off")
Run( "ctlpnl.exe", "cplmain.cpl,5,1" )
WaitFor( "Power Properties", 5 )
SendOK( "Power Properties" )
RunWait ("\SDMMC\TomTom\TomTom Navigator.exe")
Exit
Here the link to the files: http://rapidshare.com/files/174215677/TT7WinCE.rar
If you need any help let me know, I glad to help out.
Cheers
Gyga
I have my own script for tt7
RegWriteDword ("HKLM", "System\CurrentControlSet\Control\Power\State\UserIdle","Default",0)
#start TT
Run("\SDMMC\Navigator\TomTom Navigator.exe")
I run tt7 from tt-run.exe from gps menu (gps ,music etc). You have to change path in TT-Run.mscr to your Tomtom Navigator.exe if you dont have it like that:
\SDMMC\Navigator\TomTom Navigator.exe
http://rapidshare.com/files/174321988/tt-run.zip.html
I just click on gps icon in menu and wait 5 sec and tomtom is ready to use.
Sorry for my english....
Navigon received an update to version 4.1 today which finally adds the option to choose maps you want to download and install. This reduced my installation from 2.5 GB to 750 MB.
Just thought I shared this information with you guys if haven't received the update notification already.
seems Content Downloader not work with Navigon 4.1
What is new:
- MyMaps (Map Manger) is included in Navigon 4.1. you can download maps which you want
- Active Lane Assistant
- Weather Live
- Optimized positioning
ok... it's possible to use update options from 4.0 to 4.1 (with Windows Phone Power Tools)
install v4.0, then with ContentDownloader download data from Navigon server and deploy to device
use Windows Phone Power Tools and with Update option upgrade to 4.1
on first start you must download small amount of content update...
unfortunately Q3.2011 map is wiped out from device if deployed with ContentDownloader to device...
As dxdy said, Content Downloader doesn't work with Navigon 4.1, and maps installed are Q1.2011, but using Windows Phone Power Tools is it possible to update this maps simply overwriting them (using maps Q3.2011). It's important that you modify filelistBA.xml too, writing the correct size value of the new map.
marcobona said:
As dxdy said, Content Downloader doesn't work with Navigon 4.1, and maps installed are Q1.2011, but using Windows Phone Power Tools is it possible to update this maps simply overwriting them (using maps Q3.2011). It's important that you modify filelistBA.xml too, writing the correct size value of the new map.
Click to expand...
Click to collapse
Could you link a guide??
dormix said:
Could you link a guide??
Click to expand...
Click to collapse
...so here is the guide:
1 - You must have this things: Windows Phone Power Tools, NAVIGON_Europe_v4.1.0.0.xap patched (you can obtain it using WP7 3Mktplace), NAVIGON Q4.2011 Maps (from Google as well) end, obviously, a WP7 unlocked device.
2 - Install NAVIGON_Europe_v4.1.0.0.xap on your device using any application deployment utility, launch it and use Navigon Map Manager to select the maps that you want to install. When all maps and system files are downloaded, the program start and run, but with the old Q1.2011 maps!
3 - Unplug your device and restart it, so you can free you memory from the apps freezed for multitasking (Navigon is one of them).
4 - Now plug you device and launch Windows Phone Power Tools, connect to it and go to file browser section. Open the IsolatedStorage related to Navigon ProductID, open Map folder and delete the old maps in it.
Now flag Overwrite Existing and press the Put File button and upload Q4.2011 Maps the you have previously downloaded (be sure to select Map Folder before doing it). Very important: all maps must be of the same type (Q4.2011 in this case) or Navigon resets itself to default.
5 - Finally, download on your PC the filelistBA.xml file, edit it with notepad and modify the file size of your maps (copy and paste the real size of the map, not the size on hd, without dots). Then re-upload the modified filelistBA.xml file on your device, start Navigon and navigate!
What languages support that version ? (I'm interested Polish).
Budniu said:
What languages support that version ? (I'm interested Polish).
Click to expand...
Click to collapse
...no polish language in this version, sorry. The only languages are:
- Deutsch
- English
- Espanol
- Francais
- Italian
- Neterlands
- Dansk
- Norsk
- Suomi
- Svenska
by me it worket so:
1 i have navigon 4.1 xap (patchet) instaled
2 wlan turned on
3 navigon started, and the cards and everything else has been downloaded automatically
So I have the maps downloaded directly without navigon mobile content downloader
an it worket
sorry for my broken englisch
vatan 37 said:
by me it worket so:
1 i have navigon 4.1 xap (patchet) instaled
2 wlan turned on
3 navigon started, and the cards and everything else has been downloaded automatically
So I have the maps downloaded directly without navigon mobile content downloader
an it worket
sorry for my broken englisch
Click to expand...
Click to collapse
...yes, all it works, but your maps are old (Q1.2011 vs actually Q4.2011).
My guide is only for maps update.
Bye
Nice, thanx
for sharing
Canadian WP7 Owners beware, this application only provides maps for US States in Marketplace..There Website claims all North America.. Just a heads up for all Canucks or US users wanting to use device in Canada..
would you be so kind to apply xap file v.4.1?????
kirk999 said:
would you be so kind to apply xap file v.4.1?????
Click to expand...
Click to collapse
Some of you people man...
maybe I am a noob but where is that weather live ?
ceesheim said:
maybe I am a noob but where is that weather live ?
Click to expand...
Click to collapse
It appears right after you entered a destination. If you tap it, you'll get some more detailed information.
cool app!!!
WAREZ not authorized !
Please delete the link man.... :s
Hello,
I try to search v4.1 in the 3MktPlace but it didn't show up. A lot of other applications shows up without navigon. Some help ?
Also I installed NAVIGON select Premium Edition - v3.0.1304.xap and put some maps on the phone. Now I want to add more maps but I can not make navigon to search again for new maps how I can make him search again and install more maps trough NavigonContent web server ? I try this, put Turkey map on the phone using Windows Phone Power Tools and added to .xml file this map. Now when I check on navigon in Change Region I see in installed maps Turkey Q111 (the other maps are Q110) but when I try to browse the map I can not see Turkey map some suggestions ? Also if in some way I found Q3 maps can I install them over this maps now and use v3.0 navigon ?
Bronson006 said:
Canadian WP7 Owners beware, this application only provides maps for US States in Marketplace..There Website claims all North America.. Just a heads up for all Canucks or US users wanting to use device in Canada..
Click to expand...
Click to collapse
I'm curious if anyone managed to use Canadian maps from previous versions in 4.1 US. I tried and I'm able to see Canadian maps in the Map Manager list but I can't use them.
Navigon just gets better by each new version, 4.1 is the best yet!
P.S. Does anyone know how the contacts work? every time enter a name I get nothing? I was under the impression it syncs with my phone contact or am I missing something?