Develop Bugs

More about my Bluetooth trouble...

Hi all,
A while ago I posted a message about my Bluetooth trouble with my GPS device.
I've narrowed things down to my bluetooth (either the settings, the hardware or the stack). I know for sure that there's nothing wrong with my GPS device...
The following happens:
-I turn on my phone
-I switch on Bluetooth using the Comm Manager
-I pair my GPS device
-Launch Tomtom or Route66 or Google Maps or any other GPS software I've tried
-It works perfectly for a few minutes
-Then suddenly I get the message 'GPS device not found'
-When I quit the application, I still can see the Bluetooth icon in the top bar of my homescreen
-When I enter the Comm Manager there's a red cross in the bluetooth icon, and trying to turn it on doens't work
-The blue light still blinks!!!!
-I can't enter the bluetooth settings, the device gets stuck (it hangs) for a few minutes
The only thing that works is resetting the device (turning it off and on again)
It happened in WM5 and it still happens in WM6!
Does anyone have a clue???
Sorry for my xxxth post on this subject, but I'm pretty much desperate!
TIA!

This May Help You!
Bugs74 said:
Hi all,
A while ago I posted a message about my Bluetooth trouble with my GPS device.
I've narrowed things down to my bluetooth (either the settings, the hardware or the stack). I know for sure that there's nothing wrong with my GPS device...
The following happens:
-I turn on my phone
-I switch on Bluetooth using the Comm Manager
-I pair my GPS device
-Launch Tomtom or Route66 or Google Maps or any other GPS software I've tried
-It works perfectly for a few minutes
-Then suddenly I get the message 'GPS device not found'
-When I quit the application, I still can see the Bluetooth icon in the top bar of my homescreen
-When I enter the Comm Manager there's a red cross in the bluetooth icon, and trying to turn it on doens't work
-The blue light still blinks!!!!
-I can't enter the bluetooth settings, the device gets stuck (it hangs) for a few minutes
The only thing that works is resetting the device (turning it off and on again)
It happened in WM5 and it still happens in WM6!
Does anyone have a clue???
Sorry for my xxxth post on this subject, but I'm pretty much desperate!
TIA!
Click to expand...
Click to collapse
Ok, girlfriend try this [HKEY_CURRENT_USER\Software\HTC\BTProfile] "ON"= dword:00000001 -> 0 if off! BTProfile is the new key! Babygirl, give it a shoot!

Intergalactic said:
Ok, girlfriend try this [HKEY_CURRENT_USER\Software\HTC\BTProfile] "ON"= dword:00000001 -> 0 if off! BTProfile is the new key! Babygirl, give it a shoot!
Click to expand...
Click to collapse
Thanks, hunk!
But uhhh.... Despite of my avatar, me = man...
Anyways...
I don't have that registry-key, I'll try to create one, but any idea why I don't have that key??

Create A New Key
Bugs74 said:
Thanks, hunk!
But uhhh.... Despite of my avatar, me = man...
Anyways...
I don't have that registry-key, I'll try to create one, but any idea why I don't have that key??
Click to expand...
Click to collapse
Sorry about the Gender mix up, but you will have to create a new key, Oh! the key is not in any windows device, that why you are going to create one thats works!.......!

[offtopic]
Hahaha, I just thought the lady on the avatar is sooooo damn cool!!!! She's a beauty of the eighty's (her name is Joyce Drake by the way http://rateyourmusic.com/artist/joyce_drake )
[/offtopic]
I've tried to edit my registry an add the key, but I find PHM registry editor quite confuding, so maybe I've added a wrong key or value...
So far, no succes, but I'll try another registry editor to check my editing skills!
I'll keep you posted!

Resco Smartphone Version!
Bugs74 said:
[offtopic]
Hahaha, I just thought the lady on the avatar is sooooo damn cool!!!! She's a beauty of the eighty's (her name is Joyce Drake by the way http://rateyourmusic.com/artist/joyce_drake )
[/offtopic]
I've tried to edit my registry an add the key, but I find PHM registry editor quite confuding, so maybe I've added a wrong key or value...
So far, no succes, but I'll try another registry editor to check my editing skills!
I'll keep you posted!
Click to expand...
Click to collapse
Or try Total Commander!

I have tomtom 6 on my dash with other tweaks to run it.
Go into the settings click on the "Power Management" scroll down to the "Display Time Out" and choose NEVER and then go to the "Home Screen" settings for the "Time Out" choose NEVER also. Hope this resolves your issue.
Another issue could be due to your dash/s620 not being App Unlocked.

Thanks for your reply. I'll try it first thing in the morning!
BTW, do I have to apply the app-unlock again after upgrading the ROM?

LovnGrlyGrlz said:
I have tomtom 6 on my dash with other tweaks to run it.
Go into the settings click on the "Power Management" scroll down to the "Display Time Out" and choose NEVER and then go to the "Home Screen" settings for the "Time Out" choose NEVER also. Hope this resolves your issue.
Another issue could be due to your dash/s620 not being App Unlocked.
Click to expand...
Click to collapse
What other tweaks? I'm curious!!

Intergalactic said:
Ok, girlfriend try this [HKEY_CURRENT_USER\Software\HTC\BTProfile] "ON"= dword:00000001 -> 0 if off! BTProfile is the new key! Babygirl, give it a shoot!
Click to expand...
Click to collapse
Like this?

Bugs74 said:
What other tweaks? I'm curious!!
Click to expand...
Click to collapse
i have to use a program called fake cursor and i enabled the jogg bar feature, fake cursor acts like a virtual mouse cursor so i can type in the address, choose options etc. i can use majority of the menus without it but you do need it some times, since tomtom is more for touch screen devices anyways. the joggbar i use mainly for the shortcut for the fakecursor. the bottom touch shortcut is set for the fake cursor app and the top shortcut is either tomtom or as mine is set to the fake cursor menu so i can disable it when im done.
So did it work? Another suggestion that might help, when I installed tomtom on my dads ppc and i couldnt get the blue2th gps recvr to sync properly, got really frustrated... I figured out that the my dash was the culprit, turn off any blue2th devices near you and then it worked instantly.

I posted a screenshot (post #10) to verify if I added the right settings. If I did it right, they didn't work!!
The disconnection of the bluetooth connection also appears when I'm in my car, and the only bluetooth devices there are my HTC and my GPS.
Thanks for your suggestions! I'm getting pretty desperate by now. The only thing I can try is using a different GPS device.
I'll keep you guys (& gals?) posted!

Why always today screen after suspend mode?

Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5. An example:
When I'm listening to music with the built in Windows Media Player I like to turn off the screen (using the built in blanc screen function) to save battery. When I switch on the device again to change music or something the device always displays the today sceeen instead of the media player application and I have to switch back to the media player window manually. That drives me crazy as it is not the way it behaved using WM5.
Is there any possibility to change this behaviour in the way, that WM6 shows the last used application instead of the today screen when resuming from suspend mode or blanc screen?
Thank you!

Check you Today settings.
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.

Timtown said:
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.
Click to expand...
Click to collapse
I checked this already. The described problem is not related to the Today timeout setting. It appears every time, after a few seconds blanc screen anyway. Try it, you'll see.

i have also experianced this, is really annoying, anyone have any ideas how to resolve it...?

r3d3 said:
Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5.
Thank you!
Click to expand...
Click to collapse
Hi!
The best prgm I used for this reason is PPcsoft psShutXP u can have it on tray and u gona have 3 alt. Light Off Shut Down and Soft Reset strike on Light Off it works fine

I like this "feature". Problem I have is if I leave outlook open, I don't get a LED notification of new mail. At some point I had a ROM installed that always went back to the today screen and seem to resolve my issue. Is this something that can be changed in the registry?
Cal

nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue

r3d3 said:
nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue
Click to expand...
Click to collapse
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/

same problem here...

BatteryStatus
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.

lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
I do not use BatterySTatus but I'll try it for solving my issue

Abo Forat said:
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
Thanks for sharing the link but I think, this will not solve the problem for me: as far as I can see you have to go to the today screen anyway to reach the buttons this tool provides. So I haven't got anything....

Great stuff! Batterystatus really solved the problem...just set the tool to not show today screen and it works. Thanks for the hint!
(though I really don't understand that MS doesn't support this feature?!)

Hi, its not that MS doesn't support it, its that its enabled on some roms, and others not, mine always returns to whatever app it was on, after suspend, If you wanted to help figure out the cause, I suggest you install sktracker, and do a before and after the battery status install, and see what key that option in battery status is changing, I don't much care for battery status myself.

Start > Settings > Today > Items Tab
UNCHECK the Today Timeout
Today Timeout means that if the device is left unchecked for say, the Default "4 Hours" than after 4 hours, no matter what program window was running, it defaults back to the today screen when the device is reawakened
pssibly a bug in your OS or some program you are running makes it so every time you turn it back on
but uncheck that and maybe youll have some luck??
i had a similar problem with my iPaq hx4700 where if i was at the today screen, it would keep flickering, refreshing it every 1 second
i disabled the today timeout, and viola, its worked fine since

I have this issue too.
lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
Unrelated. I have BS installed and that option is NOT checked, yet it still does it.

This is very annoying, I like mine to sleep after 2 mins (to save power and lock the keyboard). then back to the today screen and have to switch to what I was doing..

Related to the Lock setting?
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.

pgray007 said:
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.
Click to expand...
Click to collapse
Hey, you are absolutely right. The problem won't be fixed by Batterystatus. I just mad a hardreset and didn't set a password, so I thought batterystatus fixed it.
It is a bug with the built in password function. So, is there anybody out there, who is able to fix that?

As said before, the Today showing after power-on the device is "another" problem caused by the WM6 Password Lock System. It's necessary to disable the password that locks the device to fix it.
And it's not the only problem. Be warned, don't try this at home!!!; if you got a password active and then you change the Owner Name without changing the password, you will find after the next reboot that your machine is unreachable because the password isn't recognized at all.
Incredible but true!

HTC Phone Lock (Transparent)

Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF

hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?

chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF

Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!

I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..

take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF

chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF

Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.

Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help

I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.

rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!

Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF

Is this possible? Completely lock the screen with the Power button

(This is my first post, so I'm very sorry if I screw something up...I've been reading the XDA forums for quite some time now, so I hope I've got it right... Also, this is my very first WinMo device, so I apologize if the solution is something really stupid and easy.)
Hello guys,
I just got the TP2 about three days ago, and I SPLed it and installed WM6.5 on it. I've got the EnergyROM_RHODIUM_20091007_Titanium ROM on it right now.
However, there's something that's been annoying me. Whenever I hit the power button on the top of the TP2 to deactivate the screen, the screen will turn on if an incoming text or email should come in while the screen is off.
The only way it won't do this is if I lock it from the Honeycomb menu, then turn off the screen via the power button.
Is there a way to make the power button lock the phone and shut off the screen so it will not wake up when a text comes in?
If someone could tell me a way to do this, I'd very much appreciate it!
Thanks.
EDIT: Forgot to mention this is a T-Mobile USA Pro2.

seems this software should satisfy you :
LockDevice: Another great application that locks the device with the tap of the power button. Uses the standard windows lockscreen, very lightweight. (freeware) ~ Thanks thierry2064
in a very useful thread:
http://forum.xda-developers.com/showthread.php?t=550973

Xodium;4709086I said:
just got the TP2 about three days ago, and I SPLed it and installed WM6.5 on it. I've got the EnergyROM_RHODIUM_20091007_Titanium ROM on it right now.
However, there's something that's been annoying me. Whenever I hit the power button on the top of the TP2 to deactivate the screen, the screen will turn on if an incoming text or email should come in while the screen is off.
The only way it won't do this is if I lock it from the Honeycomb menu, then turn off the screen via the power button.
Is there a way to make the power button lock the phone and shut off the screen so it will not wake up when a text comes in?
Click to expand...
Click to collapse
If you have the WVGA(HD) Tweak tool (should be under All Programs), it has a setting that disables Wake on SMS -- it's setting 2.2.
I don't know about a setting specifically pertaining to e-mail...my very-similar setup doesn't wake up as yours does.

buckingham said:
seems this software should satisfy you :
LockDevice: Another great application that locks the device with the tap of the power button. Uses the standard windows lockscreen, very lightweight. (freeware) ~ Thanks thierry2064
in a very useful thread:
http://forum.xda-developers.com/showthread.php?t=550973
Click to expand...
Click to collapse
That's a very nice lock, I use it myself, but it's for WM 6.1.
For WM 6.5 use SmartLock.
S

MCbrian said:
If you have the WVGA(HD) Tweak tool (should be under All Programs), it has a setting that disables Wake on SMS -- it's setting 2.2.
I don't know about a setting specifically pertaining to e-mail...my very-similar setup doesn't wake up as yours does.
Click to expand...
Click to collapse
I installed SmartLock, then, when I went looking for the WVGA Tweak Tool, it was there. I thought I didn't see it, but, oh well. I checked it and it said that Wake on SMS was disabled (default).
Maybe SmartLock did that? I'm not sure. I'm testing it right now. Thanks for all the help so far.
EDIT: IT DID WORK! Thanks so much! (Definitely makes me feel better about selecting the TP2 to replace my iPhone 3GS )

sleonard said:
That's a very nice lock, I use it myself, but it's for WM 6.1.
For WM 6.5 use SmartLock.
S
Click to expand...
Click to collapse
Just to make clear: LockDevice works perfectly for WM6.5. I use it myself a long time now with different 6.5 ROMs.

Auto-lock the phone, is this really possible?

Hi,
My phone keeps on living its own life in my pocket and really enjoy calling random people on my behalf. This is getting more and more irritating, and I would really love to be able to have it locked as soon as I suspend it.
I am using the official HTC ROM with WM6.5 WWE (and want to stick to this one). I also want to use the default WM6.5 lock screen which is perfect for my needs.
I allready tried a lot of solution presented on XDA, but none was perfect so far.
-HKCU\ControlPanel\BackLight\AutoDeviceLockEnable to 1. This solution seems to be the best, as it is built-in and light; but it doesn't work at all; the phone does not lock itself
-I tried DeviceLock from XDA, which didn't work either
-I also tried Autolock, which work quite good as long as I don't resume my phone with the sliding keyboard; after that I have to unlock it manually to get it working again...
-I also tried to add a PIN code, but this is really inconvinient for my use...
If you were able to successfuly use one of those solutions (or maybe even a new one), please let me know; you'll save my phone's life!
Thank you!

I haven't tried it, but HERE is another called LockDevice

i have always used s2u2. didnt use any of the fancy stuff, just as a screen lock. good thing is that u can set it to auto-off ur phone after n seconds. i set to 5s. so i dun even have to press the power button to off the phone. just map s2u2 to a shortcut button or softkey and it will off my phone 5s after activation. when u received and sms or miss a call, good thing is ur phone remains at the s2u2 screen, and it will turn off ur phone after 5s also.

PocketShield works great but you gotta buy it after a trial.

SecretAgentMan said:
I haven't tried it, but HERE is another called LockDevice
Click to expand...
Click to collapse
Woaw this was exactly what I needed!
Very light and doing what it is supposed to do; thank you very much!
EDIT: Now I am looking for pretty wallpaper (which also work in landscape) for my lock screen, any advice?

LockDevice doesn't work for me for some reason.. It does if I use the power button, but if I use a software "Power Off" shortcut it does not.. And I use the shortcut 98% of the time to turn off the phone via hitting the End button twice or tapping my right softkey at the Today screen. If I use it, the phone doesn't lock at all.
I continue to use S2U2, which works just dandy, but it's pretty resource intensive. 3.2m of ram, although I personally have no problems with battery life etc using it.

I use CSDevCtrl its got loads of options and if you want to simply lock the device when you switch the screen off or after a period of time its easy to do so.
edit: I just realised that this is now called auto lock and may be the one you referred to in the OP. If it is just to let you know I don't have to unlock again after keyboard slide out so it may be worth double checking the settings.

yep reg settings have no effect. I use SmartLock (easy find if you search for on XDA) with WM6.5 lock and Suspend Lock enabled. The WM6.5 lock screen is awsome.

My favorite has become TouchLockPro. Can be set to no lock is there is light on the sensor, or external power, and using the G-Sensor.