Hi,
After I've installed kaiser dialpad and commmanager (from Schen) on my hermes (windows mobile 6, original rom from HTC) I have problem with incoming calls. When someone is calling me, I don't get the incoming call screen, neither any sound of ringtone/vibration. I get only "Call status" button on the main screen but I don't know who is calling.
I tried uninstalling dialpad and commManager but that not helped.
I have earlier reTouched dialpad for Wizard installed. So I think that made the problem.
I am new to widows mobile, so can anyone help me deal with it?
thanks
T.
----update
I just installed reTouched, uninstalled it, and then installed kaiser dialpad, and now everything works. My bad, topic can be closed.
Related
I'm not sure if this is the right place to post this since the WMB V2.0 is no longer supported if this is wrong MODS please delete.
I can not get into the setting to train it. It worked fine with WMB V1.2 and for a test I flashed LSVW 3/26 and it worked fine with that. I can run the app normaly but since no number or apps are trained with my voice i can use the program. Everytime i hit the setting button it just shuts down and thats it. Anyone have any hints to this?
I have the same issue with my TyTN, cannot access the settings menu inside voice dialer, it just shuts down after telling me there are no trained voice tags.
Any member has info as to wich rom cooked or not works with microsoft voice command mainly the notifications of messages and incomiong calls to the speakerphone ? please share your knowledge thanks in advance!
Another question might be... Does anyone know when MS is going to come out with a WM6 version of Voice Command?
Yes version 1.6 is made for WM5 and will run on WM6 but I have the same issues with all WM6 Rom's I have tried where it does not work with notifications or txt/email/phone calls.
What's odd is that it work's GREAT on the Wizard builds of WM6. I used VC on my Wizard with almost every different published ROM including more than a few of my own. It always worked flawlessly on that platform.
That is strange because for me, in WM6 I have only ever been able to get the "Voice Commands" part of the program to work.
It never reads any notifications and someone told me it will read txt and emails too but I have never found a way to make it do that either.
VC 1.6 does work with WM6, but requires patches
I apologize, I cannot put my hands on the files with directions for you. But if you search around the site, you can find the 0.9f cab file to install, and the files to update your version of VC 1.6 to v1.6.17913, which will allow all Voice Command features on the Hermes (including Bluetooth).
Dean
vp3g's 3.62 ROM
Radio 1.54.07
To read txt and e-mail is a different program
DIE_HARD said:
That is strange because for me, in WM6 I have only ever been able to get the "Voice Commands" part of the program to work.
It never reads any notifications and someone told me it will read txt and emails too but I have never found a way to make it do that either.
Click to expand...
Click to collapse
To have your phone read your e-mail to you requires a different program than Voice Command (perhaps Cyberon's Voice Commander? - I'm not sure).
Good luck!
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
Hope this works!
Thanks and I thank Google XDA search as well
EDIT:
YAY Reading notifications now! THANKS!
And I guess when they told me it reads emails they meant it reads "From" and the "Subject" that are shown in the notifications.
EDIT2:
So now why did I have to download this version here and not from Microsoft? Still kind of feel like I wasted money seeing as how I ended up using a version found on these forums.
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Voice Commander
Another thing to check once you install that update, go to settings, then voice command settings and double check your setting for notifications. The default setting "Announce notifications using bluetooth hands free only".. i change my to Announce notifications using Bluetooth hands free if available.
hope this helps.. but for me, this is holding me up a long time, unless I finally realized. Working fine for me since, with ALL ROMS i have tried.
I'm using ...
... Voice Commander on my newly upgraded UK T-Mobile Vario II with Fun_Key latest WM6 ROM.
Works great, its naturally a little faster at recognising my voice than it was on WM5.
Havent tried notifications though, i used to use it for incoming SMSs but got fed up of it announcing my T-Mobile remaining Flext credits (sms's sent automatically) every few days or so!
Stu
DIE_HARD said:
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
Hope this works!
Click to expand...
Click to collapse
lokmeup said:
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Click to expand...
Click to collapse
Thanks both of you, DIE_HARD and lokmeup.
Those worked perfectly except only when I pushed left side button of my head set(Jabra BT620s).
Is there any body who have same problem as mine?
don,t care for bluetooth which one patches so that i can have the annoucements routed to the speakerphone when i recieve a text or incoming call or email ?
leoiden said:
don,t care for bluetooth which one patches so that i can have the annoucements routed to the speakerphone when i recieve a text or incoming call or email ?
Click to expand...
Click to collapse
Use it, it works the way your asking....
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
I downloaded and installed this. Turned the phone off and then back on.
But now my 8525 locks up whenever I slide out the keyboad. Help?!?
I'm running the WM6 provided by Cingular/HTC
Do I need to actually install Voice Commander 1.6 THEN install the above?
Either way, I'm guessing my 8525 now needs a hard reset
Hello,
i apologize should i have missed an existing thread on my problem. I found nothing.
Problem is: Using an Artemis (T-Mobile MDA III) Windows mobile 5.0 and Voice Command 1.6. VC deos not work properly on Voice controlled dialing neither from "Contacts" nor by voicing numbers to dial, one by one.
It worked well on my previous MDAII (Magician), WM3 and VC 1.5. I wouldn't like to miss it.
Calling up programs and info's (time, date, memory usage, rind-mode) etc. works well.
Thx in advance for any help.
Wyzard
Wyzard said:
Hello,
i apologize should i have missed an existing thread on my problem. I found nothing.
Problem is: Using an Artemis (T-Mobile MDA III) Windows mobile 5.0 and Voice Command 1.6. VC deos not work properly on Voice controlled dialing neither from "Contacts" nor by voicing numbers to dial, one by one.
It worked well on my previous MDAII (Magician), WM3 and VC 1.5. I wouldn't like to miss it.
Calling up programs and info's (time, date, memory usage, rind-mode) etc. works well.
Thx in advance for any help.
Wyzard
Click to expand...
Click to collapse
I also use voice Dialing on my MDACIII with WM5, but i just use the standard software, works ok with that. it might be a conflict between Voice Command 1.6 and the standard software.
Once you have activated a button for Voice Command it should work fine, mine does.
Try a reinstall, and make sure you install to the device memory, not a memory card.
Hi,
When I'm in my car and have my bluetooth headset on connected to my Touch HD, I would love an an application to detect that I have my headset on, and to automatically read allowed any new text messages or emails after, say, a delay of 10 seconds.
Does anyone know of any software that could do this?
Thanks!
Dave
Microsoft Voice command does this perfectly. It reads sms's and calender reminders and email subject lines and sender.
seal said:
Microsoft Voice command does this perfectly. It reads sms's and calender reminders and email subject lines and sender.
Click to expand...
Click to collapse
+1
You can also set MSVC to only read messages over bluetooth/wired headset.
Great - this looks great. However if I look at the latest version (1.6) I see a number of comments in various places about it not working properly on the HTC Touch range of phones. For example see the comments at the bottom of the Hangago page here...
http://www.handango.co.uk/PlatformProductDetail.jsp?siteId=172&platformId=2&productType=2&productId=151270#expand
Can people confirm that you have this working OK on the touch HD - v1.6?
davehodgkinson said:
Can people confirm that you have this working OK on the touch HD - v1.6?
Click to expand...
Click to collapse
I have v1.6.1971 working on my Xperia (similar interface to Touch HD). I used spb pocket plus to add it to a "long button push".
You need to set it up in |START|SETTINGS|PERSONAL|VOICE COMMAND| and map a button to |START|PROGRAMS|ACCESSORIES|VOICE COMMAND|.
You'll also need to soft reset after installing and play around a little with the settings (i.e. uncheck "High Priority Messages only" in the messaging options etc.).
Can you download a trial to test it first?
The only problem I have is that it does not announce the caller for incoming calls. I assume because this does not work on the xperia that it will not work on other HTC devices too.
buzz83 said:
I have v1.6.1971 working on my Xperia (similar interface to Touch HD). I used spb pocket plus to add it to a "long button push".
You need to set it up in |START|SETTINGS|PERSONAL|VOICE COMMAND| and map a button to |START|PROGRAMS|ACCESSORIES|VOICE COMMAND|.
You'll also need to soft reset after installing and play around a little with the settings (i.e. uncheck "High Priority Messages only" in the messaging options etc.).
Can you download a trial to test it first?
The only problem I have is that it does not announce the caller for incoming calls. I assume because this does not work on the xperia that it will not work on other HTC devices too.
Click to expand...
Click to collapse
Announcement of incoming calls has been fixed in several of the cooked ROMs that include MS Voicecommand.
OK great - I'll download it and give it a try.
Matterhorn... do you know whether the fix that has been included in the cooked ROMs is available separately, as I don't want to replace my ROM...
davehodgkinson said:
Great - this looks great. However if I look at the latest version (1.6) I see a number of comments in various places about it not working properly on the HTC Touch range of phones. For example see the comments at the bottom of the Hangago page here...
http://www.handango.co.uk/PlatformProductDetail.jsp?siteId=172&platformId=2&productType=2&productId=151270#expand
Can people confirm that you have this working OK on the touch HD - v1.6?
Click to expand...
Click to collapse
I am using version 1.6.19209 with stock Orange rom, works great via speaker or bluetooth
Great - thank you! I'll have a go and report back.
OK so the update. I have successfully installed in (with a little help from the post over here), and have tested it with the basic functions, and it works OK. Not perfect with names, but for the basic things it works fine.
However, one of the main reasons, as you know, that I wanted this is so that it 1) works with my bluetooth hands free (a Plantronics Voyager 520) and reads out emails/texts over the bluetooth hands free when I'm wearing it. There is a setting in SETTINGS>VOICE COMMAND, where you can select "notifications" and select whether it notifies using "bluetooth hands free only", "over speaker if bluetooth is not available" or finally "only over speaker". However the notifications do not seem to be working at all - when I receive a text message, the phone makes the text message tone, it vibrates and nothing happens.
Am I doing something wrong?
[EDIT]:
I've just worked out the settings dialogue a bit more (i.e. you can select on each of the category of item and then press options)... Email is in there, but text messages do not seem to be in the list? Am I therefore to believe that text messages cannot be read out?
davehodgkinson said:
OK so the update. I have successfully installed in (with a little help from the post over here), and have tested it with the basic functions, and it works OK. Not perfect with names, but for the basic things it works fine.
However, one of the main reasons, as you know, that I wanted this is so that it 1) works with my bluetooth hands free (a Plantronics Voyager 520) and reads out emails/texts over the bluetooth hands free when I'm wearing it. There is a setting in SETTINGS>VOICE COMMAND, where you can select "notifications" and select whether it notifies using "bluetooth hands free only", "over speaker if bluetooth is not available" or finally "only over speaker". However the notifications do not seem to be working at all - when I receive a text message, the phone makes the text message tone, it vibrates and nothing happens.
Am I doing something wrong?
[EDIT]:
I've just worked out the settings dialogue a bit more (i.e. you can select on each of the category of item and then press options)... Email is in there, but text messages do not seem to be in the list? Am I therefore to believe that text messages cannot be read out?
Click to expand...
Click to collapse
Mine reads out the header from an email and all of the text message. Both come under messaging in the tick boxes.Click on Messaging and under options tick Anounce new messages Under Notifications I have ticked "Announce notifications using bluetooth hands free if available.
Works fie for me on speaker, music headset and bluetoth
Try under Messaging>Options - delselecting 'High priority messages only'
And under Messaging>Notifications - deselecting 'Only during free time'
This worked for me.
JB
Just to let you know, im using miri 6.5 v10 and voicecomand stopped any calls and messages being heard or felt. Same happened with davidueck 6.5 v8 so im guessing some roms dont work with it
For the guys that have it working, what roms are you running?
OK so the advice I've followed on this forum means I can now hear it announce text messages and emails and read them out! Great! And what is even more impressive is that it now works over my bluetooth headset too!
The ONLY thing that therefore doesn't work is the bluetooth headset being able to be used to speak commands to the phone. I was hoping that the button on my bluetooth headset that is usually used to answer or end calls would initiate MVC and allow me to control my phone from my headset. Any ideas why this wouldn't work?
Thanks
EDIT - ITS FIXED! Weird's I soft reset the phone and then held down the button my headset for a little bit longer and no its working fine! Brilliant.
Trixster101 said:
For the guys that have it working, what roms are you running?
Click to expand...
Click to collapse
Personally I am using a stock ROM on an Orange phone.
davehodgkinson said:
OK so the advice I've followed on this forum means I can now hear it announce text messages and emails and read them out! Great! And what is even more impressive is that it now works over my bluetooth headset too!
The ONLY thing that therefore doesn't work is the bluetooth headset being able to be used to speak commands to the phone. I was hoping that the button on my bluetooth headset that is usually used to answer or end calls would initiate MVC and allow me to control my phone from my headset. Any ideas why this wouldn't work?
Thanks
EDIT - ITS FIXED! Weird's I soft reset the phone and then held down the button my headset for a little bit longer and no its working fine! Brilliant.
Click to expand...
Click to collapse
Edit: OK glad it's working.
About incoming call announce question from a previous poster:
I've heard reports that with some newer roms the announce for incoming call doesn't work properly when MSVC is installed with a cab. The ROM cook has to hack in a fix...I don't think there is a cab to fix this problem.
can't figure out how to get my bluetooth to work with voice command. i can hear but i cannot initiate... any suggestions
Flash a 6.5 ROM.?
Works on 6.5
The upgrade to WM6.5 certainly fixed it for me.
Almost works on 6.5
With 6.5 I can kick off VC either from a Bluetooth headset or the Call button on the PPC. But there are no icons which means I'm left with the default setup.
Missing Voice Command Settings
Just installed 6.5, ROM 1.86.161.0 (67102) WWE
Voice Command installed, works off the Send button
Can talk via bluetooth, but cannot control the TP2
Also cannot find the settings button to adjust the control options
I assume I have just missed something
Can anyone help, please?