Hello,
after upgrading to WM 6 the annoying notification when I sent a text message is back again I know that I have send a text message so I do not need WM6 to tell me I did....
In WM5 it was possible to turn this off by adding a registry entry. In WM6 the registry looks completely different compared to the same registry entry in WM5.
Can somebody help me how to turn this notification off?
you simply add the required key and value to the WM6 registry as you did in WM5
Code:
HKLM/Software/Microsoft/Inbox/Settings/
SMSNoSentMsg = 1 (DWORD decimal)
you have to create a new key "Settings" and the DWORD value "SmsNoSentMsg". set the value to 0 if you want to have the notifications back.
just one thing: you actually dont know that you sent a text message. if your connection is not good enough to send the message now windows mobile will not automatically attempt to send it again. the notification you get is the to show that it's actually sent and not only in your outbox.
soardiac said:
you simply add the required key and value to the WM6 registry as you did in WM5
Code:
HKLM/Software/Microsoft/Inbox/Settings/
SmsNoSentMsg = 1 (DWORD decimal)
you have to create a new key "Settings" and the DWORD value "SmsNoSentMsg". set the value to 0 if you want to have the notifications back.
just one thing: you actually dont know that you sent a text message. if your connection is not good enough to send the message _now_ windows mobile will not automatically attempt to send it again. the notification you get is the to show that it's actually sent and not only in your outbox.
Click to expand...
Click to collapse
Thanks for your quick answer.
Thanks too, for the help
I'm trying this "tip", and hope it will work
Can anyone confirm that this works
i tried this and it hasn't worked.
On my previous rom, there was a peice of software that had alot of options you can disable like video calling and one option was the "no sms sent confirmation". In the about tab, it had a picture of bill gate$... Anyone have this?
alternatively use sktools in trial version!
goto "tune up" / "phone edition"
there u can alter sms delivery, message sent etc.
Woody_XDA said:
Can anyone confirm that this works
Click to expand...
Click to collapse
it works fine for me with B&B4. however, i made a mistake in my previous post (corrected now):
i wrote "SmsNoSentMsg" but it should be "SMSNoSentMsg" with "SMS" all in caps. so the correct key/value is this:
Code:
HKLM/Software/Microsoft/Inbox/Settings/
SMSNoSentMsg = 1 (DWORD decimal)
sorry for the confusion.
(to be honest, i dont know if the registry values are case sensitive. this is what works for me and also several friends of mine.)
Registry values ARE case sensitive. It is correct now and working.
OK i got it to work. for some reason, my registry would always revert after a soft reset. I just reloaded the rom, loaded the reg. key. Problem solved.
it still doesn't work for me, even after a soft reset to reload the registry.
Works fine for me, even without CAPS for SMS. If I have the oppurtunity I will post my reg-key
Woody_XDA said:
Can anyone confirm that this works
Click to expand...
Click to collapse
Works fine here on standard O2 WM6 ROM version
der_roedie said:
Works fine for me, even without CAPS for SMS. If I have the oppurtunity I will post my reg-key
Click to expand...
Click to collapse
As promised
der_roedie said:
As promised
Click to expand...
Click to collapse
`
Does this work on a WM5 device? And if yes, how do i get this in my registry?
Yes, also works on WM5, you need a program like Total Commander or some other kind of registry editor to enter you registry and make the changes.
Related
I've tried searching the board with no look, I'm sure I've seen an option for this on the phone somewhere before, but like hell can I find it now!
Basically I installed an app called phone alarm, didn't like it, so uninstalled, but it kindly disabled all my sms tones and pop ups.
I've re-enabled them in the tones and notifications, but when I sent a text message, I no longer get the useful "message sent" pop up box.
Does anyone have any ideas how to turn it back on?
Thanks, Hollinshead.
its ok, I've found it on wiki
Disable SMS Sent Notification
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings]
"SMSNoSentMsg"= dword:00000001 ->0 if Enable
I have the same probem. I used Resco Registry and went to HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings
but I can only see SMSNoSentMsg and the value "0". Where can I find that "dword:00000001" ?
Anyway I tapped on "Edit" and changed it to 0. I still dont get Message Sent notification.
Then I configured Phone Alarm (ADV tab) and found out that SMS Send Notification is Off.....I changed it to On and there it is, I now have the SMS Sent notification again!
strange thing is, when I checked again the Registry HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings, I found out that I can only see the string (Default) ..... no more SMSNoSentMsg ->0
I now have the SMS Sent notification....but what happened to the registry? Will uninstalling Phone Alarm bring back the string SMSNoSentMsg ?
The behaviour you are seeing is correct! The SMSNoSentMsg key stops the Message Sent bubble if it exists with ANY value. In order to get Ack's again this key needs to be DELETED!
@Bebbo, you mean the registry tweak on Wiki is wrong? Its not dependent on the value 1(disable) or 0 (enable) ?
thanks...
Yep thats right.
Had the same problem from the same app.
I just did this and it works now.
Much better.
dinoalbert said:
@Bebbo, you mean the registry tweak on Wiki is wrong? Its not dependent on the value 1(disable) or 0 (enable) ?
thanks...
Click to expand...
Click to collapse
I had exactly the same problem, and I was able to get the "message sent" bubble back by deleting the key. Changing it to 1 or 0 didn't work on my XDA too.
Many thanks!
When I get a voicemail notification, I only get a normal text message.
Does anyone knows how to activate the voicemail icon ?
I saw threads about Orange UK, but nothing for frenchies.
Thanks
Have you tried the solution for Orange UK ?
i.e. copy in the "old" sms_providers.dll ?
http://forum.xda-developers.com/showthread.php?t=299072
Bonjour Gregouille
I am on Orange France network and I have been using the Orange UK tweak mentioned above and it works like a charm.
Go for it is is safe, the only thing is to make sure that you only install the certificates and copy the DLL, do NOT tweak the registry yourself.
deslando said:
Bonjour Gregouille
I am on Orange France network and I have been using the Orange UK tweak mentioned above and it works like a charm.
Go for it is is safe, the only thing is to make sure that you only install the certificates and copy the DLL, do NOT tweak the registry yourself.
Click to expand...
Click to collapse
Hi
Thanks for your answer. I still get a standart text message...
Which ROM do you have ?
Thx
Have you soft-reset?
What do the text messages say?
I did soft-reset.
the message is sent from 888
and says "888" messagerie orange : 1 message
Hmmm, that just looks like a standard txt message.
The sms_providers.dll intercepts TXT messages from orange that simply say "[email protected]". The dll interpets this to turn on the VM indicator. There is a similar one for turning it off.
Do you have another phone you can try this in?
In fact, have you ever had a VM icon on this phone with Orange France?
I have ROM 3.24.0.4
Probably no Voicemail Icon in Orange(Int), except for Orange(UK)
I wonder whether Orange(FR) does support the Voicemail Indicator Icon at all, and I rather doubt they do.
Back in history, the Voicemail Indicator Icon as well as the AlternateLineService (ALS) were introduced as additional services for the then called "PCS-1800" (now better known as GSM1800) standard, in a specification call "CPHS". This is why you'd hardly find a GSM900 singleband phone supporting these features. Later it became part of the GSM-Specs and was adapted even by some traditional GSM900 providers, e.g. A1(AT).
However, not all providers support CPHS, even not all (traditional) PCS-1800 providers. For example, neither eplus(DE) nor Orange(CH) support the Voicemail Indicator Icon (as mentioned above, the network needs to send a certain message like "[email protected]" to control the icon's apperance).
As Orange(FR)/Francetelecom used to be a traditional GSM-900 provider, I hardly doubt they support any part of the CPHS specs at all. For instance, they do not offer AlternateLineService, do they? Therefore french customers will probably have to cope with traditional (anoying) SMS-Voicemail notification as the rest of the Orange world(except UK), unfortunately:-(
Cheers,
Chris
Bit in late in joining this thread, but I'm guessing it hasn't been resolved. I've just written an alternate fix for the Orange UK voicemail icon problem. It should be possible to write one for your Orange FR text messages that turns them into proper VM notifications. Let me know if you are interested, probably wouldn't take much effort at all (in theory!).
Richard.
raburton said:
Bit in late in joining this thread, but I'm guessing it hasn't been resolved. I've just written an alternate fix for the Orange UK voicemail icon problem. It should be possible to write one for your Orange FR text messages that turns them into proper VM notifications. Let me know if you are interested, probably wouldn't take much effort at all (in theory!).
Richard.
Click to expand...
Click to collapse
Of course I'm interrested !
Great news... I'll send a reply to your PM
anything new here
just curious...
inte said:
just curious...
Click to expand...
Click to collapse
I sent gregouille something to do what was requested. After some time I chased it up to get some feedback and he told me Orange France had changed their vm notification and so he no longer needed this fix.
rab.
Hi
raburton said:
Bit in late in joining this thread, but I'm guessing it hasn't been resolved. I've just written an alternate fix for the Orange UK voicemail icon problem. It should be possible to write one for your Orange FR text messages that turns them into proper VM notifications. Let me know if you are interested, probably wouldn't take much effort at all (in theory!).
Richard.
Click to expand...
Click to collapse
I'm using a Touch Diamond with mexican provider TELCEL. Any time I call my voice mail, just after I hangup, I receive a SMS from "TELCEL" with apparently no text (there may be an invisible control character), and the VM icon is never cleared.
I wonder if a fix could be done for the Diamond and Telcel like the one you did.
Thanks for any comments.
Carlos
In theory yes, this should be possible. Interesting that your VM light comes on by some method, but does not go off by the same.
Could you export the text message (with PIM Backup or similar) to find out if there are are any hidden characters in it. Otherwise may need to send you a version that will dump the text out to a file or something.
At the moment I'm in heavy revision mode for some important exams in February, so I can't promise to look at this till then, but there is a good chance I'll get 5 minutes and need a break from the study.
Richard.
Hi Richard
raburton said:
Could you export the text message (with PIM Backup or similar) to find out if there are are any hidden characters in it. Otherwise may need to send you a version that will dump the text out to a file or something.
Click to expand...
Click to collapse
I'm attaching a file with 3 messages, exported with PIMBackup.
I received the first one after just calling the voicemail from the cellphone to check it was empty.
The second one after leaving a voice mail from another phone (I received these messages in my previous non-windows phone).
The third one arrived after calling the voice mail from the cellphone to delete the message.
raburton said:
In theory yes, this should be possible. Interesting that your VM light comes on by some method, but does not go off by the same.
Click to expand...
Click to collapse
Yes, I cleared the icon by setting ...vmail\line1\unread\count to zero (BTW it was FFFFFFFF), and when the second SMS arrived it was set.
Thanks!
Ok, so I had 5 minutes and modified a previous one to do what you need. Send me a PM with your email and I'll send you the test cab file. If/when it's been tested and working I'll post the cab here for everyone else who may find a use for it.
Used the following logic:
if (sender is "TELCEL") {
if (message length is 0) vm_icon_off()
else if (message contains "Usted tiene un nuevo mensaje de voz.") vm_icon_on()
}
Richard.
raburton said:
Ok, so I had 5 minutes and modified a previous one to do what you need.
Click to expand...
Click to collapse
It's working perfectly, thanks a lot!
After further testing, I found the icon is turned on every time I softreset the phone, even if the voice mail is empty. I can clear it in the registry or by calling the voice mail an hanging. After that it works fine with your rules.
Any idea why would a softreset turn on the icon?
carlosg said:
Any idea why would a softreset turn on the icon?
Click to expand...
Click to collapse
In a word, no. Maybe that text message you get that turns the light on results in another more persistent voicemail flag being saved that also needs to be reset. That's just a guess.
I've attached the cab file with the TELCEL fix in case anyone else wants a copy in the future.
Richard.
raburton said:
Maybe that text message you get that turns the light on results in another more persistent voicemail flag being saved that also needs to be reset.
Click to expand...
Click to collapse
Ok, thanks for your comments. A simple mortscript in the startup folder fixes this last problem.
Script attached.
Have a nice day!
Carlos
is it possible to retain the message sent notification but have it go away on its own without having to press the "done" softkey? im running the latest T-mobile wm6 rom.
Actually the old message sent reg hack that killed the notification under WM5 doesn't appear to work at all anymore. I would imagine we need to find that workaround first.
I have to deal with this stupid notification AND the one from my provider telling me how much it cost to send the message and the remaining balance. I wish I could strangle them both.
monakh said:
Actually the old message sent reg hack that killed the notification under WM5 doesn't appear to work at all anymore. I would imagine we need to find that workaround first.
I have to deal with this stupid notification AND the one from my provider telling me how much it cost to send the message and the remaining balance. I wish I could strangle them both.
Click to expand...
Click to collapse
i was actually able to remove the notification by following a procedure posted somewhere but i still prefer seeing if my message was actually sent.im just annoyed by the fact that the window doesnt go away by itself like the way it does on my hermes and if i forget to press done,my incoming messages cant get through.
The message sent notification should go away on its own, prior to me editing my registry it would just go away by itself.
DotStig said:
The message sent notification should go away on its own, prior to me editing my registry it would just go away by itself.
Click to expand...
Click to collapse
hmm...this makes me wonder why mine doesnt.i assumed it was because of the new rom.maybe i should do a hard reset but ive gotten my dash to where i want it excepr for that one persistent problem.Dotsig,would it be possible for you to make a screen shot of what you have in your HKLM\SOFTWARE\MICROSOFT\INBOX\SETTINGS.
THANKS A HEAP!
Make the following adjustments to get rid of the "SMS Message Sent" popup that appears after sending a text!
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
Click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
Name the New Key as "Settings"
Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
Soft reset your device and test it with one SMS, and you will notice that the SMS Sent bubble is being disabled.
Enjoy!
i don't have the screen shot utility loaded but in there i have a string, smsnosntmsg, the value data is 1. Now this is with the regedit to have the screen not pop up, prior to this i didn't have the settings folder.
serialtoon said:
Make the following adjustments to get rid of the "SMS Message Sent" popup that appears after sending a text!
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
Click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
Name the New Key as "Settings"
Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
Soft reset your device and test it with one SMS, and you will notice that the SMS Sent bubble is being disabled.
Enjoy!
Click to expand...
Click to collapse
Please read above. This hack is only valid for WM5 and does not work for WM6. Sheesh.
serialtoon said:
Make the following adjustments to get rid of the "SMS Message Sent" popup that appears after sending a text!
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
Click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
Name the New Key as "Settings"
Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
Soft reset your device and test it with one SMS, and you will notice that the SMS Sent bubble is being disabled.
Enjoy!
Click to expand...
Click to collapse
i already did this and it apparently works for wm6 but what i really want is for the notification to go away on its own and not dissappear completely.for now i have it disabled coz as i have already said,its so annoying that the window doesnt go away on its own and when i forget to press the done softkey i couldnt receive any messages.
hello there, I have some stuff I'd like to change regarding SMS. I've got a P3300 with official WM6.
I'd prefer to change this through some options (tho I didn't find) or registry edit. If possible to do what I need without installing more (battery draining) applications, would be best, but if there is no other choice, I'll take a look at whatever application u suggest.
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
is there any FAQ of different kind of tweaks that can be done with a P3300 wm6 just through options or registry? if yes, could you please link it, I'd like to take a look at that.
thx for everything
zandadoum said:
- when I am underground and I send an SMS, it tells me it can't be send, and the message goes into the temp. folder (dunno english name of this folder) and I have to resend it manually. I'd like it to resend automatically as soon as I have signal again. That's what my previous nokia phones did.
Click to expand...
Click to collapse
sorry, no idea on this.
zandadoum said:
- when I send a SMS successfully, I get a popup and "ding" telling me it was send. I don't want this, I only want to know if there was an error. I send loads of messages, and this popup is rather annoying.
Click to expand...
Click to collapse
There is a tweak for this. Search and you will find it or else, i will try to find it 4 you this weekend.
zandadoum said:
- since I have WM6, when i open messages through the today plugin, it always asks me if outlook, sms or mms... with wm5 it always went into the last one I used. I'd like this functionality back, is it possible?
Click to expand...
Click to collapse
Yes, this question has been answered be4 too. Search and you will find it or else, i will try to find it 4 you this weekend. I thought its possible...
hopefully you can find that info and give me a hand. i tried the forum search function but as i dont know exactly what i am looking for, my search is too generic and i get loads of results (most about tweaked roms) that don't help me at all.
EDIT: found answer to 3) by myself. SOLUTION: open messages, go into menu->tools->options and there you can setup the different types of message accounts you have. at the bottom is an option to enable or disable the account selector. i just turned that off.
For the SMS sent notification:
HKEY_LOCAL_MACHINE/Software/Microsoft/Inbox/Settings/SMSNoSentMsg and set it to "1".
With the mentioned registry edit, you are not notified if the message fails to send. It just tries it, and puts it in sent items. If it fails it will not be re-send again by WM6.
you can fix the SMS/OUTLOOK/MMS thing in Options in your Messaging program.
ok, thx to that registry edit i get the sms sent popup no more. but i don't get any popup warning if it fails.
i've heard something about a different regedit key, with different numbers like
0 = no warn
1 = all warns
2 = only bla bla bla warn
3 = only ble ble ble warn
etc.
any1 got an idea about this?
also, any way to have the phone re-send failed sms automaticaly when i have signal again?
i am at a point that i would also try some SOFTWARE if needed, tho i prefer if it can be done just by registry.
Not familiar with those options. But why don't you give it a try and report back here.
GL
Ok so I added the registry key
HKLM/Software/Microsoft/Inbox/Settngs/
SMSNoSentMsg = 1
BUT
Everytime I send a text message I still get a "Sent Message" popup. WTF? How do I get rid of this? Its annoying as ****!!!
ARGH so frustrating. Can anyone help me?
I've never manually put in the key to turn it off, but I'm sure you can try D/L'ing Schaps Advanced Config or HDTweak and that has an option to disable it too.
Jason
JukEboXAuDiO said:
Ok so I added the registry key
HKLM/Software/Microsoft/Inbox/Settngs/
SMSNoSentMsg = 1
BUT
Everytime I send a text message I still get a "Sent Message" popup. WTF? How do I get rid of this? Its annoying as ****!!!
ARGH so frustrating. Can anyone help me?
Click to expand...
Click to collapse
On verizon, here is the reg key. Works.
This setting worked for my Verizon HTC Touch Pro 2
HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Inbox/Settings/SMSNoSentMsg = 2
hope this helps