Develop Bugs

latest upgrade rom

having just flashed uni with helmis latest offering and lt.cmdr.ivan offering here are some(of my) problems ,maybe this will save some of you some trouble or you may have the solutions?
helmis;
1) losing email accounts upon soft reset.
2) ring tone keeps defaulting to windows default
3) internet sharing not working-this is a big one for me as i'm field based
lt.cmd.ivan
1) comm manager -not as many options
2) again internet sharing not working
the internet sharing seems strange now having prev. set up dun and pan which protocol should be used both roms are based ont the 3.5 -any thoughts people?

CommManager2.exe
Hi,
I found in my \Windows directory the file CommManager2.exe... which happens to be the "good old" Comm Manager that we all know...
In IVAN AKU 3.5 that is
-Ireneus

alexatwocltd.com said:
helmis;
1) losing email accounts upon soft reset.
2) ring tone keeps defaulting to windows default
3) internet sharing not working-this is a big one for me as i'm field based
Click to expand...
Click to collapse
Strange, I use Helmi's and:
1) losing email accounts has not happened to me, remember only to reset the machine after having switched it off for at least 10 seconds.
2) ring tone keeps defaulting to windows default has not happened to me. -> I have been using the House M.D. ringtone ever since I first installed Helmi's 3.5 rom
3) internet sharing not working -> again, this works fine with me ....

i ended up putting on idria beta and bt internet sharing now works no errors ,however helmis was prettier though....

alexatwocltd.com said:
helmis;
3) internet sharing not working-this is a big one for me as i'm field based
lt.cmd.ivan
2) again internet sharing not working
the internet sharing seems strange now having prev. set up dun and pan which protocol should be used both roms are based ont the 3.5 -any thoughts people?
Click to expand...
Click to collapse
if U experiencing prob. with sharing inet from pc(pc connected to inet - passthrough connection) try change usb connection type to serial (in helmi's 3.5 rom use prog :/programs/extra/usb mode switch) & change to serial not rndis, it works for me

alexatwocltd.com said:
having just flashed uni with helmis latest offering and lt.cmdr.ivan offering here are some(of my) problems ,maybe this will save some of you some trouble or you may have the solutions?
helmis;
1) losing email accounts upon soft reset.
2) ring tone keeps defaulting to windows default
3) internet sharing not working-this is a big one for me as i'm field based
lt.cmd.ivan
1) comm manager -not as many options
2) again internet sharing not working
the internet sharing seems strange now having prev. set up dun and pan which protocol should be used both roms are based ont the 3.5 -any thoughts people?
Click to expand...
Click to collapse
try a hardreset
and flash again
sometimes it happens that all the files on the old rom are not overwritten by the new rom
maybe this will help
frz

thanks for all the help/response
i forgot to mention i was using bluetooth for the internet connection ,but i did flash each time a couple of times if that makes sense

WM6 T-Mobile US Beta Build 17224.0.1.0 Non-working applications

The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?

-TXTman can't capture sms
-AE Button Plus broke "end call" key when i remapped it to end programs
-Replacing IE_Short.lnk with task manager command causes internet explorer to open simultaneously with task manager

yeah no threaded sms programs will catch the messages. that's my only gripe right now.

So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry

aauspitz said:
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
Click to expand...
Click to collapse
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J

countfloyd said:
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
Click to expand...
Click to collapse
I've run an Application Unlock on my S620 and I've managed to install Blackberry Connect but, like you, not getting any mail.

I've given up and gone back to the German WM5 rom. After a couple restarts of the device, the blackberry connet top banner doesn't even show up on homescreen anymore!
I'll wait till rim gets their act together on WM6.
J

Hmm...I am going to give this another try.
I realized that I couldn't get emails on my device, even after putting the WM5 rom back on, because I hadn't sent a "service book" from rim's blackberry site. That did the trick. Gonna, reload WM6 and give it a shot!
J

Bah, no luck getting this thing to connect or run reliably let alone get emails...

how do i go back to my original .. windows mobile 5...

if anyone is using WM6 on the Dash...
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
and if it does change it to "headset" automatically could you please tell me if you are able to change your profile to "normal" while the bluetooth headset is still connected
Thanks in advance

streetx613 said:
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
Click to expand...
Click to collapse
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc

McHale said:
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
Click to expand...
Click to collapse
well yeah it would seem that way but when i have my bluetooth headset connected... sometimes i want my phone on silent/vibrate and other times i want it to play sounds, and i hate having to go and edit the headset profile manually to do this, just changing the profile would be a lot more convenient.

I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc

McHale said:
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
Click to expand...
Click to collapse
no for bluetooth, you can't change your profile unless you disconnect the headset

I noticed that none of the MSN pre-installed software that was part of WM5(MSN IM, Hotmail access, etc) is on this version. When I attempt to set up my messaging to receive hotmail, I get an error stating: "could not find pmsnlauncher". I've looked around and found a download of the pocketMSN software, but it must be 'activated' for ~$20. It does mention (msn website), however, that if the software is 'pre-installed' no activation is necessary. This leads me to believe that the MSN software is simply not part of the BETA rom.
Anyone else notice this? Any thoughts?

msn is now windows live.

jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
uhhh... tpc works just fine for me... i'm using 2.0 beta 4 of tpc, but other versions should probably work as well. make sure your phone is completely app unlocked, or you will have problems. that includes the 0000101b policy entry in the registry.
i'm the creator of tpc, so if you have questions about it feel free to message me.

does "right menu" work on WM6?

Sling player works with WM6 beta
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
I found this over at the sling community forum. I can confirm that it Sling player mobile is now working with the install of the DLL only cab auto install.
Use the link below and go to the March 10, 2007 post by wpbear.
http://www.slingcommunity.com/forum/thread/18903/Windows-Mobile-6.0-incompatible/

Can't connect with activesync anymore

Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance

mauce said:
Hi,
I've got a weird problem with my MDA compact III (T-mobile Netherlands, original ROM).
For some reason I don't know the active sync doesn't seem to identify the phone anymore.
I know there are a lot of problems with active sync and I've read and searched a lot of those threads but I can't solve my problem.
Active sync always ends up with the message that there is no phone connected whereas it is.
I tried different versions of active sync and different PC's (WIN XP SP2), deleted partnerships both on the phone as well as in active sync, I changed the name of the phone which it uses to identify on connection.
No matter what I tried, nothing could solve this.
The only way for me to exchange data at this moment is using wm5torage and using CAB's to install.
Please help!!
PS: A hard reset is not an option since I need to continue with the tools and files that are currently in the ROM.
Thanks in advance
Click to expand...
Click to collapse
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.

I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks

maurizio.n said:
I have a similar problem :
facts :
1. the usb cable charge the battery correctly.
2. The Headphones and mic are working well.
3. No data connection ( both activesync and WM5Storage )
4. Back from long journey using as navigator so the car holder and the car charger my have damaged the data pins ?
5. Reinstalled activesync on the PC , tried different PC, tried different Usb Cable, soft resetted an hard resetted the device but no success.
Please give me some suggestions before going to repairing service.
Thanks
Click to expand...
Click to collapse
Sounds as if all is working . And what ever you were trying on the phone has an adverse effect ? What are these tools that are keepimng you from hard resetting ? I believe there is another program for connecting to this cell let me rack my brains while I think ...

PURESKILLZZZ said:
Ok ... I have seen your problem many times and yes there are many other threads on it . But lets see since im woke if I canhelp you crack this little apple . 1st what you mean by you can't hard reset you need to continue wuith tools . 2nd when the phone is connected to your computer does it charge ? Do you see it connect in the device manager ? 3rd of you plug your phone to the charger does it charge as well.
Now if these question are yes then 1st I would say reboot your computer and soift reset phone ... If that doesnt solve the problem then we will goto next step.
Click to expand...
Click to collapse
Hi PURESKILLZZZ,
Many thanks for taking you time to read my explanation.
Let me give you some answers:
1.) The reason for me is that in case of a hardreset I need to install all applications again. Actually I've been doing a hard reset and then afterwards restored a backup I created with spb backup. Unfortunately the problem was still there.
2.) Yes the phone charges when connected through USB (so it's not the connector that is faulty I guess).
The device manager I need to checkout didn't lok at that yet.
When I connect using wm5torage I can see the SD card in the explorer.
3.) The phone charges when connected to the charger.
So I guess the answer is yes to all your questions.
If you have more questions to be able to help me please let me know.
I'd like to tackle this problem.
Thanks in advance

I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance

I believe it is safe to say your present software is the issue and have you tried sktools for dong the back up .

maurizio.n said:
I have a similar Problem:
facts:
1. Usb data cable charge the battery correctly
2. Headphones with mic are working well.
3. no activesync connection.
4. no wm5torage connection
5. tried different PC , different data cable ( the one than comes with PS3 ) , hard resetted the device but no success.
Any suggestions ?
Thanks in advance
Click to expand...
Click to collapse
Well maybe if we find a solution to first guy yours may work as well...

PURESKILLZZZ said:
Well maybe if we find a solution to first guy yours may work as well...
Click to expand...
Click to collapse
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....

1 other thought ... A simple fix whichh may work . goto comm manager on your phone and click activeSync and see if that helps .

maurizio.n said:
i don't think so because i have no wm5torage connections so in my case i think is an hardware issue like data pins damaged ....
Click to expand...
Click to collapse
Did you jam the charger in the phone at anytime or did the phone drop while connected to charger . Just being connected for long periods of time dont hurt as I have ran my phone for over 24 hours connected to power while playing the radio thru the phone.

Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)

mauce said:
Unfortunately none of the suggestions worked for me.
It's not related to dropping the phone or taking hardware damage by faulty use or something.
This I know for sure since I own this phone only for a couple of weeks and didn't harm it in any way.
My conclusion also was that it must be software related, that's why I started this thread anyway.
Therefore I'm looking for suggestions/hints on the software side (most probably the problem would be on the phone and not on the PC, but what is it?........)
Click to expand...
Click to collapse
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?

1 last note before I go take a power nap . You can check your activesync setting on the phone . goto => Start > Settings > Connections > USB to PC. Change the mode of the box next to Enable advance Network functionality. click ok .. Now try to connect ... The box is suppose to have a check in it but sometimes there are other reasons why it doesnt worj the defaukt way . I hope I have been of some assistance to you.

Similar issue
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!

JC#79 said:
I had this same issue recently I thought it may be due to upgrading to activsync 4.5.
But it seemed not to make much difference when I attempted to work it on another pc using activsync.
The problem only occured after I had been using pocket mechanic to delete files and free up dead registry files.
I didn't want to do a hard reset straight away so instead I restored an older backup from before the issue started & since then the problem has been resolved.
So I guess the question is do you have an older backup than the one you have tried if so try it & see. Other than that a hard reset may well sort the issue?
Hope this helps, and serves as a warning to others don't delete certain reg keys even if a program (pocket mechanic) stated them to be empty or redundant unless you have a backup to restore when things go wrong!
Click to expand...
Click to collapse
Yeah a backup is a good idea but most dont do that . And yeah some cleaners do remove more than they should.

PURESKILLZZZ said:
Ok .. Lets chase the possible software issues . What rom are you running and what have you installed ?
Click to expand...
Click to collapse
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...

mauce said:
I'm running the official T-Mobile Netherlands ROM
My installed progs are:
anton tomov pocket mechanic
MASPware benzineverbruik
Google Maps
Microsoft .NET CF 2.0
Shannon and Keane pGCalSync
Pocket e-sword
Microsoft SQLCE 2.0
HudsonMobile Phonedashboard
------
I-mate WMP Today
MGSH Magicall
Scrary Bear Software Check Notifications
Noisette Software CedeFTP
BuildXPDA Bandwidth Calculator
Dinarsoft MemMaid
SPB GPRS monitor
Chi-Tai Dang BatteryStatus TD-plugin
Illium Software eWallet
GB-SOFT Tweak
Resco Today Plugin
Resco Registry Add-in
Resco FTP add-in
Resco Explorer
Microsoft Remote Display Control
Conduits Pocket IP
Thunder WM5torage
Tomtomt Navigator v6.020.7980
PC Counselor Tweaks2k2 .NET
Nyxbul Software Contacts Backup
SPB Backup APCp CalSyncUm
Modaco nodata
SBSH.Net Phoneweaver
Macromedia Flash Player ActiveX
oggsync.com oggsynccab
Mike Simpson Chardguru
Backmann Software Printboy
Shape Services IMPlus
HTC X-button 1.5
Spb Diary
LSDsl EasySetOwner
Daniel Herrero Bandswitch
Vicsoft ClearTemp
Acpecto Software Wififofum
Please advice...
Click to expand...
Click to collapse
Almost every program you named I have installed various times . And I know from experience quiet a few of them clash . Biggest example is the anton tomov pocket mechanic and PC Counselor Tweaks2k2 .NET. Both of those running with the resco stuff is utter ciaos.

Hell this is complicated...
I have the same problem although my mda compact III (T-Mobile) is pretty new! Would it help to
a) install activesync 4.5 (I currently use 4.2)
b) to debrand it
Hope there is a simple solution... and many thanks in advance for it!!!

I had a similar problem, are you guys using a firewall? if so you may need to open a port or what I do is temporarily deactivate my firewall when I connect my orbit to my pc.
Hope that helps.

Transfer Phone Book to Car via Bluetooth?

Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim

It's definitely not a limitation of the Hermes... I can upload my contacts to car set via Bluetooth. I don't have an Acura though... sorry.

stpete111 said:
It's definitely not a limitation of the Hermes... I can upload my contacts to car set via Bluetooth. I don't have an Acura though... sorry.
Click to expand...
Click to collapse
If you right click a contact, do you get the option to send via bluetooth? I do not and am wondering if something needs to be set or turned on.
Thanks.

Use the Jeyo bluetooth software. It will most likely transfer all your stuff to your car with no problems.

http://www.jetwaremobile.com/
It will do SMS messages too. You can even set it to use a different MAPI store such as email. Although there is a character limit that makes it kind of useless.

I have an Audi with MMI and it transfers fine, there is a short delay though after starting it up till the phonebook is available

Bluetooth & Infiniti
I wonder if anyone has had any experience with this utility and a 2007 Infiniti G35x that has the nav / tech package. I can pair my HTC TyTN just fine and use the basic bluetooth functions. I can even send one contact entry at a time but haven't figured out how to send my entire phonebook. I wonder if this app will help.
Anyone have any experience with this phone / car combo?

Thanks everyone for the jetware info. I will give it a shot and reply.
Shamim

I bet it is a setting issue for the Acura. The Ford Sync system will ask, "Do you want to load phonebook?" right after it pairs...

It works - JETware Mobile Software
Upon suggestion from 'Diaftia' in this thread (THANK YOU!) I downloaded Hands-free Extension from JETware and installed it on my HTC TyTN. I then sat in my car and through the phonebook 'send' mode of the applet, I chose to send all 354 contact records to my car's phonebook via the bluetooth pairing. The car immediate showed 'downloading' at the appropriate time and viola! They were there.
I need to play with it some more to see if I can get more than the first phone number field to download. The Hands-free Extension app does allow you to pick only certain categorized phone records to be sent.
I've since purchased the utility and will explore more of its features! So far, so great! I've been looking for this solution for quite sometime!
Regards,
David

SteinyD said:
Upon suggestion from 'Diaftia' in this thread (THANK YOU!) I downloaded Hands-free Extension from JETware and installed it on my HTC TyTN. I then sat in my car and through the phonebook 'send' mode of the applet, I chose to send all 354 contact records to my car's phonebook via the bluetooth pairing. The car immediate showed 'downloading' at the appropriate time and viola! They were there.
I need to play with it some more to see if I can get more than the first phone number field to download. The Hands-free Extension app does allow you to pick only certain categorized phone records to be sent.
I've since purchased the utility and will explore more of its features! So far, so great! I've been looking for this solution for quite sometime!
Regards,
David
Click to expand...
Click to collapse
David,
I installed the software but did not see a Send option. I was able to select the categories on contacts that I wanted for the phonebook.
Where was the Send option? In the Jetware software or your car?
Thanks.
shamim

In the Extension software from the menu, go to phonebook options. In phonebook options select the categories that you wish to send to the phone. Press the 'menu' soft key option again. You will see 5 options, of which 'send contacts' is one of them. You will then get another set of options and finally a confirmation before it sends the records. Make sure your car or receiving device is set to receive before you finalize the send process.
SKassam said:
David,
I installed the software but did not see a Send option. I was able to select the categories on contacts that I wanted for the phonebook.
Where was the Send option? In the Jetware software or your car?
Thanks.
shamim
Click to expand...
Click to collapse

Same Problem with Pioneer
SteinyD said:
I wonder if anyone has had any experience with this utility and a 2007 Infiniti G35x that has the nav / tech package. I can pair my HTC TyTN just fine and use the basic bluetooth functions. I can even send one contact entry at a time but haven't figured out how to send my entire phonebook. I wonder if this app will help.
Anyone have any experience with this phone / car combo?
Click to expand...
Click to collapse
Well, I have experienced exactly the same problem with my Pioneer, I am able to send one by one contact to the car but I am not able to send the entire phonebook at once. When I try to do that then the bluetooth connection is getting disconnected and that is it. I wonder if that is a problem with the bluetooth driver,

I had a heck of a problem with importing to my new Audi A4 Pervertable, and worse it kept loosing connectivity then re-establisign it (mid song no less). Eventually fixed with BT Radio 1.50, (tried everything before it).

I don't know whether this is relevant or not. This is how I do it.
I have a Garmin Nuvi 610. When pairing the device with my Hermes all I have to do is make sure comm port service is enabled in the hermes bluetooth utility when asked for service type. If it's not enabled then there won't be any sharing of phonebook between them.

SKassam said:
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
Click to expand...
Click to collapse
I currently use the JetWare Mobile extension ver 1.31 that I updated several days ago and now I can use Voice Command via bluetooth hear and give commands through the car stereo system.
I can also hear announcements of calls, emails via the stereo system. Sorry got off subject...
With this software I'm pretty sure that you will be able to upload your address book. I had no problem with 275+ contacts....
They have a free trial you could try to ensure that it works for you, but it's not free...
If memory serves me think it was about $15, well worth it if your a heavy BT user.
Here is the site: www.jetwaremobile.com

jac said:
I currently use the JetWare Mobile extension ver 1.31 that I updated several days ago and now I can use Voice Command via bluetooth hear and give commands through the car stereo system.
I can also hear announcements of calls, emails via the stereo system. Sorry got off subject...
With this software I'm pretty sure that you will be able to upload your address book. I had no problem with 275+ contacts....
They have a free trial you could try to ensure that it works for you, but it's not free...
If memory serves me think it was about $15, well worth it if your a heavy BT user.
Here is the site: www.jetwaremobile.com
Click to expand...
Click to collapse
Jac,
Thanks for the info. I already gave jetware a shot but it did not work for me. I do not get the "Send" option on my contacts or phonebook through Jetware or Outlook contacts on the TyTN. I am using Radio 1.51 and Jetware extension 1.31. If I got the Send option, it would work. For Voice command 1.6, do you use the option 'use bluetooth when available" or the option "use bluetooth only".
Thanks for being helpful.
Shamim

SKassam said:
Has any one been successful in transferring their Phone book via bluetooth to the car's phone book? If so, can you please let me know how?
I have an Acura TL 2008 and it has this option but I cannot seem to transfer even one single contact via bluetooth to the car let alone a whole phone book. I can pair perfectly and make and receive phone calls.
I am using Vp3G's WM6 3.0 version and I have Tmobile USA with unlimited internet. For radio, I am using the latest 1.51.
Is it the limitation of the Hermes or limitation of the Bluetooth in the Hermes?
Thanks.
Shamim
Click to expand...
Click to collapse
I have never had any problems with the phonebook transfers on Audi A4 (06) with any of the WM6 ROMS....even my ol' BlackJack now works with the WM6 ROM

SKassam said:
Jac,
Thanks for the info. I already gave jetware a shot but it did not work for me. I do not get the "Send" option on my contacts or phonebook through Jetware or Outlook contacts on the TyTN. I am using Radio 1.51 and Jetware extension 1.31. If I got the Send option, it would work. For Voice command 1.6, do you use the option 'use bluetooth when available" or the option "use bluetooth only".
Thanks for being helpful.
Shamim
Click to expand...
Click to collapse
Sorry to hear it didn't work for you...
I know in my case, it took me a couple times to figure out how to upload the the contacts to the car stereo using Jetware...
First time was: I did not go into... Hand-free Setting\Menu\Advanced Options\ And check off Phonebooks.
Second time was: I did not leave the car stereo phonebook settings "waiting to accept data" before I sent all the contacts from my PDA.
Any way back to your last question "About VoiceCommand 1.6" I use the setting "Announce notifications using Bluetooth hands free only"....
Thanks,
Good luck on your quest...

Problems with Activesync under WXP with WM6

Hi,
I have a strange problem. I have a Hermes running WM6 (org T-Mob). I can't install software or explore the device from my PC at work. It's possible to sync files, email and almost everything else (exception: I have Pylon Pro running to sync with Lotus notes Shows it's synced but no data is transfered) but other than that I can't contact the device. Explorer shows no contents and when the software window opens all I get is the frame with no content. I had WM5 running und upgraded in the hope of solving this problem but no go. Activesync works fine with my old device (MDA II) running WM2k3SE but not with the hermes. It also works fine at home running the same configuration. Here are the stats:
Hermes with original German T-Mobile WM6 Rom
Activesync 4.5
Windows XP Professional
Has anyone had a similar problem? Any suggestions? Our IS&T department can't find a solution.
Cheers

datas_brother said:
Hi,
I have a strange problem. I have a Hermes running WM6 (org T-Mob). I can't install software or explore the device from my PC at work.
---
It also works fine at home running the same configuration.
Click to expand...
Click to collapse
If it's working on your home machine it's unlikely to make a difference, but I find this - http://toril.ru/pda/akrndisadd.exe - very helpful when activesync stops working, and it's non-destructive (so it's worth trying).
Geoff

Hi,
Problem is now solved. I did 2 things:
1. Made it Super CID
2. Ran the small prog from the post above.
I'm not sure which solved it but one of the 2 did.
Thanks for the help.
Cheers
DB

Hi,
I take back what I said in my last post. The problem is solved but it has nothing to do with the 2 things I mentioned above.
T-Mobile sets "Settings>Connection>USB to PC>Extended Network Functions Activated" to on by default. Unchecking this box is what solves the problem.
It seems that with this active, Activesync tries to look on the LAN for certain components, which it cannot find. This causes the communication between Win. Explorer and the MDA to not work. It also stops you from opening the "Software" funktion in Activesync (You only get a frame with no contents and the hourglass).
I hope this helps someone. It certainly caused me allot of headaches.
Cheers
DB