I cannot get screen taps to work - P3300, MDA Compact III ROM Development

My Artemis Orbit on O2 froze so I did a soft reset - no luck so I did a hard reset. The phone boots to the green screen which says 'Tap the screen to set up your Windows Mobile-based device etc'
However there is no cross to tap and screen taps do nothing.
I've flashed the ROM via the Bootloader screen (followed instructions to load the correct O2 Operator NBH file to the root of a Micro SD card) a few times but no luck.
I cannot find anything on this problem on the site but I can miss things!
Can anyone advise what I need to do?
Thanks,
Stew

Seems nobody knows what I should do here.
I can get to Bootloader and see ActiveSync but it won't go past the 'setup screen' where it asks for screen taps to align the screen. There is no 'cross' on display.
Which part of the software controls this?

On the inital screen there is no cross, but a screen tap anywhere should start the setup proceedure.

I cannot get a screen tap to be accepted anywhere. The Green Setup screen appears asking for a tap but that does nothing - I'm thinking a tap with a large hammer is coming to it soon! Only joking!
Is this a hardware fault I've got rather than a software problem?
There is no screen cover on it as I've read than can hamper screen taps.

Related

:(

i have a big problem my friend lent me an 02 xda exec. i hard reset it n now the problem is that whenevr the phone starts it says tap on the screen to setup ur windows mobile phone....but the screen tap is not working the keybaord is fully functional except the start menu i.e the window icon key and the i cannot tap on the screen with the stylus....please help :S ...though i can recive n send calls use all the rets of the keyoard but the touch screen doesn't work i can see everything clearly but the only problem is the tap input!
so hard reset it again and go through the setup properly.
buzz
Hi,
Maybe your alignment is out. ie your screen taps are off the mark.
Realign your screen (maybe with a hard reset like they say).
Just a thought
Michael
On a side note, I noticed a little "backdoor," if you will, when the initial Windows Mobile calibration and tutorial starts up - press the OK button and it will take you straight to the Today screen, but since the touchscreen hasn't been calibrated, it performs totally wacky when you touch the screen.
Of course, you can use the keyboard to get to the Settings panel and go to the Screen applet and recalibrate it from there.
thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S
cyrus994 said:
thanks for helping but the thing is that firstly
when it says tap on the screen to setup ur windows mobile phone the screen taps do no work
secondly i press the okay button and the screen that i see in front is not my usual desktop ofcourse with the touch screen not working still
thridly i donnot seem to find the settings and all the rest on the screen because the widows is not setup on the xda :S
Click to expand...
Click to collapse
do a HARD RESET... push the little buttons on the keyboard that are dashes. They are to the left and right of the send and end call buttons. While holding those down reset the device.
So to repeat... DO A HARD RESET> am i missing something?
Cyb
i did a hard reset but still does not work
i did a hard reset then a screen appears after a i press 0 that says Tap here to setup your windows mobile phone. But when i tap on it nothign happens :S
Faulty screen?
i had same problem, just had to many hard resets, also take the battery out for an hour or two

Stuck on Align screen (tapping works)

I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Raven_coda said:
I just resurected my xda IIs from the grave and upon start I come to the Align screen stage. I follow the directions as usual but it just keeps asking for the taps over and over and over. It never passes the same five steps. I've tried different ROMs but they all stop there. Could it be caused by the little internal battery being dead? Is my digitizer crap? Is it martians? Are the forces of evil combining against me? Am I doomed?
I'd like to see this old guy work again.
Thanks for any tips in advance.
Click to expand...
Click to collapse
hard rest then hold the 2 buttons next to the volume slider only and press the rest button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
then press the message button on the front that looks like an postal letter
this wil reset the options saved kind of like resetting a pc bios to manufacture defaults .
then try again to do the alignment.
I had similar when I flashed pdaviets rom to my blue angel and that resolved it
Thanks for the reply, unfortunately I broke me screen tinkering with it so I'm not able to test your idea.
I started with two LCDs one with a bad digitizer and one with a broken screen. I touch the digitizer off the one a replaced the other so that I had a working screen but then I had the problem listed above. Before I saw your response I thought I might have some dirt or something under the screen causing it to not work so I took it apart but I guess I was just a little too rough this time and cracked the LCD
I'll have to find a new LCD if I plan to resurrect this phone.
Thanks anyways for the help
stuck in 4 color screen
cyberjak said:
hard reset then hold the 2 buttons next to the volume slider only and press the reset button on the bottom using the stylus.this should take you to the 4 color screen with 3 options to be set
1st one leave as NO just press the top button
2nd option as yes by pressing the bottom button then press the top button to goto the 3rd
3rd option change to yes again by pressing the bottom button
Click to expand...
Click to collapse
I´ve tried everything with my XDA III PH20B1 - no camera model -, but I never get the 3 options screen. Just the 4 colors and bottom right the radio version R 1.10.00.
Is there any other way how to make my O2 XDA III boot after the WM6.1 upgrade ( from 2003se) ?
I have the same problem (I have already reply in another thread...), I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
no need to upgrade or delete anything from bios,this is not a cause of motherboard and software.I removed the motherboard and essembled in a working screen phone.there is no problem all ok,its not a problem with backup battery too.Then i changed working phone motherboard to cant align phone but same as before it dsnt align.Therefore in my investigation its a problem with the touch or screen.
its not a problem with screen cover too.
If any knows the exact solution for align problem screen ,please post it.
eway - press the power/stand by and leave for 15-30secs
then pen reset, press [cam] + [rec] as the 4 colour screen comes on and change 2/3 - as previously stated countless times - press [mail] to reset - this will reboot your new rom.
touch flo user manual is a little allusive
but, soo much too test, soo little time
#===#===#[]#===#===# . . . . . . . . . . . . . _-=d.b=-_
riya2008r2k - can you plz show some pictures of the internals of a BA ?
I for 1 would be very interested, too see. . .
post a link, please!!
How to bypass Align Screen?
If you have flashed a proper rom/ hard reset your device, there could be some dust on display which won't let the align screen pass. This is a real annoying feature on WM platform. But guess there are always ways to bypass software related issues.
The display can be cleaned by patting a small amount of water on it, and then running the water along with a visiting card on the edges of the screen. This will take off all the dust on the sides, and will let you pass the align screen easily. You can simply wipe the display propely with a glass cleaner.
If this doesn't help then :
When your phone says align screen, connect the phone with computer and get it detected in Active Sync. Next, you could be able to access Tree/Files on your phone. If you are able to do so, then go to startup and delete files directing to Align Screen, if I remb it was "welcome" something. Delete the file, and there won't be any align screen.
or
You can always go for an easier method. Download Code Factory's Remore Screen Alignment (http://www.codefactory.es/en/downloads.asp?id=108). And simply enjoy.
In both of the case, active connection with Active Sync is important. If you are unable to connect your phone, then I believe there ain't any way other than changing the display.
Hope it helps.
wbr
Sonny
O2 Flame
Hello everybody,
I've got a serious problem with my 2 years old O2 Flame: sometimes, when I reboot my pda, I can't realign the screen. And when I can do it, after a while, the left of the screen doesn't respond, or, when I click on it, it's another part of the screen that answers! I flashed the bios already: nothing changed.
@Gerd
Did you try Remote Screen Alignment?
Sonny
wow, that tool is awesome. My digitizer is cracked.
Disillusioned said:
@Gerd
Did you try Remote Screen Alignment?
Sonny
Click to expand...
Click to collapse
How do you do that please ?
Zincubus said:
How do you do that please ?
Click to expand...
Click to collapse
Try steps from this post : http://forum.xda-developers.com/showpost.php?p=1769443&postcount=1
This is for HTC Wizard, but it should work.

Touch screen problem

Hi guys.
I just had a problem with my XDAIIs. After I sync it with my PC and restored the back up files, the touch screen suddenly doesn't work. I reset it to scratch, now I couldn't even proceed with the reinstallation of the OS as I can no longer proceed with the touchscreen alignment..
Im stucked with nothing on my XDAIIs.. any help?
THanks
There is a program called "Remote screen alignment" from Code factory (http://www.codefactory.es/en/products.asp?id=244) which will allow you to skip the alighnment process. This can, however, result in an incorrectly alligned screen (Don't count on entering your pin from the touch screen, use the keyboard instead.)
My touch screen was unable to sense some of the screen which made it useless, after it broke (don't drop it on rocks) I completely replaced the touch screen. This requires some expertese in the use of a soldering iron and how to dismantle your device (Tx-6 required).

TF3D launches at startup but have to tap screen to display home screen.

When I boot up after reset or power off, the homescreen displays top task bar, bottom soft keys, and displays "launching TouchFlo3D..." and then... nothing. The screen stays like this until I tap it, and then it displays the home screen. Anybody else seeing this?
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
I have never got no one to answer a question on here good luck...
PaulusUK said:
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
Click to expand...
Click to collapse
Does touching the screen make it start?
I know that not turning off TF3D before installing some cabs can make it behave oddly- TF3D restarts, fails to launch at boot, etc...
Mine does the same thing except its just a plain screen until I touch it then it says launching tflo
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
acrh2 said:
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
Click to expand...
Click to collapse
It has something to do with the PIN lock code, you're right.. now we just need someone to look into this further who knows how to troubleshoot these issues from the back-end.
Bump for more answers!
-mak
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile

Touch Screen Not Working

I just received my Z1C and I've been having lots of touch screen problems.
When I get to the unlock screen, a lot of times nothing will register on the touch screen. I have to push the power button to turn the screen on and off to get the touch screen to register, and a lot of the time I have to turn the screen on and off more than once to get it to work.
Another issue I'm having is in the settings menu. The top portion of the screen doesn't register any touches. For example, when I tap on the Wifi settings, nothing happens. I have to pull down the screen like half a centimeter, then tapping Wifi will work. This is so frustrating...
Is there any way to fix this without rooting, unlocking bootloaders, or installing a custom rom?
rumthin said:
I just received my Z1C and I've been having lots of touch screen problems.
When I get to the unlock screen, a lot of times nothing will register on the touch screen. I have to push the power button to turn the screen on and off to get the touch screen to register, and a lot of the time I have to turn the screen on and off more than once to get it to work.
Another issue I'm having is in the settings menu. The top portion of the screen doesn't register any touches. For example, when I tap on the Wifi settings, nothing happens. I have to pull down the screen like half a centimeter, then tapping Wifi will work. This is so frustrating...
Is there any way to fix this without rooting, unlocking bootloaders, or installing a custom rom?
Click to expand...
Click to collapse
already tried a hard reset ?
Yes. I've done a factory reset, and nothing has changed. Nothing registers on the unlock screen when I touch it. I have to turn the screen on and off multiple times to get it to work.
I am using the free screen protector that came with the phone. I doubt that's the issue though.
This can't be normal. I'm thinking I just got a lemon...
rumthin said:
Yes. I've done a factory reset, and nothing has changed. Nothing registers on the unlock screen when I touch it. I have to turn the screen on and off multiple times to get it to work.
I am using the free screen protector that came with the phone. I doubt that's the issue though.
This can't be normal. I'm thinking I just got a lemon...
Click to expand...
Click to collapse
if youre done a factory reset and the problem persist im pretty much sure its a hardware problem...
anyway, go to about -> diagnostic and make the touchscreen test.
any issues there?
if i were you, i would reinstall the firmware using SUS to be 100% sure its HW problem.
Already you try a hard reset. I think it is your harware problem. If you have a warranty you can go customer care. I am sure they solve your problems.
not working at all
Hi guys, my diplay is also down - broken - and i have a gesture lock on. I can not unlock the screen. How can I perform a hard reset without touching a display? I was searching whole internet for two days and nothing helped.
If I connect phone to the PC, it must be unlocked.
I need some files from internal storage :/

Categories

Resources