Hi, All!
I have upgrade Universal to 128 RAM (phisicaly), but WM5 couldn't see them.
I tried all available ROMs.
Could you help me.
Boris
Fashist said:
Hi, All!
I have upgrade Universal to 128 RAM (phisicaly), but WM5 couldn't see them.
I tried all available ROMs.
Could you help me.
Boris
Click to expand...
Click to collapse
Oh nice. So you have finally made an upgrade. But i dont think 128MB is the max? Did you order 64MB from hynix or Infineon?
Did you solder them on? And they are not recognized? Did you remember to flash them after you soldered them. Usually you have to flash the mods after you hook them up into the motherboard. Read the manual that came with the RAM.
The signals are just not reaching the RAM to get it initiated and working. Universal might not detect them in the ROM like it does not detect my 8GB SD cards full memory and keeps saying 2GB.... The RAM might be working but to make sure try running a heavy application and see the time difference, that is if it is faster or slower. Or try playing HD videos, copying files, running multi-processes. Try using task manager if that helps, should show how much RAM the device actually has.
Fashist Только НТС тебе может помочь -насколько я знаю под 128М компилится специальный ROM и я неуверен что он есть вообще .
arc said:
Fashist Только НТС тебе может помочь -насколько я знаю под 128М компилится специальный ROM и я неуверен что он есть вообще .
Click to expand...
Click to collapse
Ошибаешься, при загрузке РОМа идет тест кол-ва памяти, соответственно если ОС не видит 128 - значит память припаяна криво.
mamaich said:
Ошибаешься, при загрузке РОМа идет тест кол-ва памяти, соответственно если ОС не видит 128 - значит память припаяна криво.
Click to expand...
Click to collapse
Why are you guys posting in Russian? I thought this is an english only forum.
Я думаю что тут проблема не кривости припайки памяти а в сигналах Cs и других т.е. фактически запаять память не проблема - а вот проконтролировать прохождение всех остальных сигналов уже будет проблематично ,насколько ты знаеш уже пробывали припаять спецы и пока что неполучается - или я ошибаюсь ?
english would be appreciated...... coz for most of us it is latin mr Arc
I believe it is a limitation of the operating system (WM5) and it cannot address memory beyond 64 MB, otherwise why no manufacturer has to date made RAM in excess of 64 MB available to us.
Now you can find quite a few devices which have 128 MB or even more of ROM but RAM is still at 64 MB by all. We do not urgently need a very large ROM becasuse this is something you can always substitute through an SD card but RAM is the real thing and unfortunately WM5 devices to date are marred by shortage of RAM. Try loading one of the very large web pages and before the page loads the device runs out of RAM.
Anyways a good effort and hope you are somehow successful.
Regards
srmz said:
I believe it is a limitation of the operating system (WM5) and it cannot address memory beyond 64 MB, otherwise why no manufacturer has to date made RAM in excess of 64 MB available to us.
Click to expand...
Click to collapse
You are absolutely wrong. There are at least two WM5 devices with 128Mb - Himalaya and BlueAngel. CE has a memory limitation - it can address 256Mb of RAM for user programs, and 512Mb more are available to kernel (hardware control registers, etc).
I've created a test program that tests the RAM amount available to OS:
http://slil.ru/23593566 (or attached to this post).
Copy it to device, run it, select "Test1" and write here the output.
Then select "Test2".
Test1 - is a test extracted from NK, on 64Mb it would output "ReadData != WriteData", then "Mem = 64M".
Test2 - is my own test. On 64Mb it would output "Exception while reading >64M", then "Mem = 64M".
You should test it on 128M and write here the messages. If they are the same - you've incorrectly soldered chips. If they are different - you are lucky, and there is a bug in NK.
mamaich said:
You are absolutely wrong. There are at least two WM5 devices with 128Mb - Himalaya and BlueAngel. CE has a memory limitation - it can address 256Mb of RAM for user programs, and 512Mb more are available to kernel (hardware control registers, etc).
I've created a test program that tests the RAM amount available to OS:
http://slil.ru/23593566 (or attached to this post).
Copy it to device, run it, select "Test1" and write here the output.
Then select "Test2".
Test1 - is a test extracted from NK, on 64Mb it would output "ReadData != WriteData", then "Mem = 64M".
Test2 - is my own test. On 64Mb it would output "Exception while reading >64M", then "Mem = 64M".
You should test it on 128M and write here the messages. If they are the same - you've incorrectly soldered chips. If they are different - you are lucky, and there is a bug in NK.
Click to expand...
Click to collapse
hi! i tried your TESTmen, and the out put data was same as yours '64MB'
i got incorrect chip
i am having HIDDEN extra ram more than 1 year in my universal.
http://forum.xda-developers.com/showthread.php?t=248985
Hello Buddy,
If RAM upgrades succeded then I would like to do it.
It will be great if someone write a detail how to for the RAM upgrade, i.e. dissemble, chip soldering etc.
Thanks.
ranju said:
Hello Buddy,
If RAM upgrades succeded then I would like to do it.
It will be great if someone write a detail how to for the RAM upgrade, i.e. dissemble, chip soldering etc.
Thanks.
Click to expand...
Click to collapse
Hmm.. If i am able to upgrade my Universal's RAM I will let you all know. Right now i think it is one of the fastest upgrades I can make.
hmmm - a realy nice topic - well actually I've tested this last day and I'm absolutely sure that I've soldered my memory perfectly - I've got it from other universal - but here is the same problem - the device just don't see 128MB of memory - after many hours of think and test we are absolutely sure that in Universal WM5 just is not managed to address this memory - may be - some of GURU's here can acomplish that addressing task with some of existing ROM's
Asukal said:
i am having HIDDEN extra ram more than 1 year in my universal.
http://forum.xda-developers.com/showthread.php?t=248985
Click to expand...
Click to collapse
I've looked on this foto - http://www.asukal.jp/Jasjar/PB081087.JPG
it has the same chips as other devices, and extra resistors are not soldered. So no extra RAM there
mamaich said:
I've looked on this foto - http://www.asukal.jp/Jasjar/PB081087.JPG
it has the same chips as other devices, and extra resistors are not soldered. So no extra RAM there
Click to expand...
Click to collapse
hi,
hi remenber that captures were
"Bfore remove original ROMs" and
"After removed original ROMs"
just now i disassenbled to take picture of currently board.
i hope they didnt cheated me
hope you can check me.
Left side is new 128MB<they said>
right side is original 64MB
Asukal said:
hi,
hi remenber that captures were
"Bfore remove original ROMs" and
"After removed original ROMs"
just now i disassenbled to take picture of currently board.
i hope they didnt cheated me
hope you can check me.
Left side is new 128MB<they said>
right side is original 64MB
Click to expand...
Click to collapse
Well i am going above 128MB and i am also adding flash memory. Also i have the exact symmetrical pins on the RAM and the flash memory. So I will be getting them soon and soldering them on ^^.
nuclear said:
Well i am going above 128MB and i am also adding flash memory. Also i have the exact symmetrical pins on the RAM and the flash memory. So I will be getting them soon and soldering them on ^^.
Click to expand...
Click to collapse
great news,,,,,
hope we can be shared the infor from you! kiss u!
Is it not a limitation of the PXA270 processor fitted to the Universal, that it can only address 64mb + 64mb (Rom + Ram)?
nuclear When you will begin something do rather then tell fairy tales?
when we see your technical genius - show foto where you have installed new RAM and this works?
I hear only delirium.
It is declared:
http://forum.xda-developers.com/showthread.php?t=286785
the battery - no photo !!! - you not even tried this do.
http://forum.xda-developers.com/showthread.php?t=286729
Samsung 150X 8GB SD (32GB) - no foto
Upgrade RAM 128 Mb -no photo !!
Photon on Universal - figment!
How much possible invent the delirium and give the unverifide advices and hope to people!
Asukal
We with mamaich to have an idea -but we must check - for this needs soldering 2 resistors. One adds voltage to microcircuit of the memories -other additional signal of the sample of the higher part RAM ( 9000 much looks like HP 4700 where additional memory works ).Also I do not see around additional RAM element -a capacitor for eliminating the hindrances on power. Will Possible work and without capacitor -but possible malfunction -only check experimental.
jasonkruys said:
Is it not a limitation of the PXA270 processor fitted to the Universal, that it can only address 64mb + 64mb (Rom + Ram)?
Click to expand...
Click to collapse
Thanks for addressing that Jason. I am awaiting a reply from Hynix regarding your question. I will post it here as soon as i recieve the reply. I had the same question too and I had emailed Hynix. I am waiting for their reply. Hopefully in 1 to 2 business days I will recieve their reply and get some production going.
Hellow!!! I changed my diamond on HD!
And I redraw my IPC Diamond Black Dialer for HD.
If you will send me files (MS Word) with characters I will make cabs for other languages. ([email protected])
GR added (THNX to panosha http://forum.xda-developers.com/member.php?u=391502 )
cool skin! Thanks
i like it thanks a lot
is this english?
very cool...but is it english?
thx
nope, russian. But are all bitmaps, so it isn't difficult to extract them from cab, modify in latin chars and install. Only two of them needs to be modified (Assets_dialer_Normal.bmp and Assets_dialer_Pressed.bmp)
I really like this dialer, can anyone who knows how (Not me) could remove the Russian letters on the dialer?
Thanks
Dang would be nice if it was in more langauges
Great skins, not useful in russian though!
what a pity for me...
could you pls add English on it?
thanks in advance.
willwmj said:
what a pity for me...
could you pls add English on it?
thanks in advance.
Click to expand...
Click to collapse
It is in english....... I just want the russian characters above the english letters removed if possible as I really like the dialer.
It would be better if it was multi language like Camro made of his black dialer screen
Although I like this one more
it changes the default language i had to uninstall it back
The English version is now accessible from the first page.
I installed the IPC Black Dialer_Eng.cab on my stock 2.03 SVE
This is the slide screen i get
The dialer pad looks good
Uninstalled and hoping for an update
I installed the IPC Black Dialer_Eng.cab on my stock 1.14 ITA no brand: OK OK OK!!!!!
Vtunabo said:
I installed the IPC Black Dialer_Eng.cab on my stock 2.03 SVE
This is the slide screen i get
The dialer pad looks good
Uninstalled and hoping for an update
Click to expand...
Click to collapse
The screenshot seems from a Diamond, not a Blackstone: that's why it's screwed
cool skin !!!! Many Thanks ...Fantastic !!!
Rom BlackCook 1.4 ITA (1.14 Based) Touch HD
Question. Would you know where we can grab a bootloader image with the image in the final picture you uploaded? (Black WinMo bootscreen)
bbonzz said:
The screenshot seems from a Diamond, not a Blackstone: that's why it's screwed
Click to expand...
Click to collapse
You are right, didn't see I was in blackstone forum, I just followd a link
sorry
So i looked and found some 2 year old posts, with .cab files, both did not work for my 6.5 wm
Just wanted to ask if someone could help me
im looking for a tweak to change the color of the flash lights on my htc, for example from red to green, or probably pulsating.
i hope someone can help : D
thx
if anyone willing to help me in this issue i really need to convert that russian samsung keyboard XAP to HTC HD7 if anyone can help i would appreciate any hand in this matter
i found this the other day, wanted to edit the other post but since you asked here too about russian keyboard support... maybe this will help you
http://wp7.apphab.com/in-russian-by-sanguine-cloudscape-inc/
in.Russian by Sanguine Cloudscape Inc.
$1.99
Russian support for WP7 This application allows you to send SMS, emails, and to search the web in Russian (Cyrillic) language. Application has a custom keyboard for entering Russian, English and Numeric symbols. Search supports Yandex, Bing, Google, and Yahoo. Text messaging supports user-controlled templates for most common messages. To switch between SMS, e-mail and search, use application bar menu.
Эта программа позволяет посылать смски, электронную почту, а также искать в Интернете на русском языке, используя наиболее популярные поисковики (Яндекс, Bing, Google, и Yahoo). Встроенная клавиатура поддерживает русскую, английскую и цифровую раскладки. Переключение между СМС, электронной почтой, и поиском осуществляется через меню приложения.
Click to expand...
Click to collapse