I'm really sorry to be starting a new thread, but I've been racking my brains over this problem and haven't got anywhere yet. I know it's not the application so it must be something I've done, just not sure what!
Until today I have been able to use the BuildOS.exe in both Pandora and Core's kitchens without problem. Haven't tried using it for a few weeks, but with the new OS build today tried Pandora. Unfortunately, when I try to open BuildOS, it reports it has encountered a problem and needs to close. It offers the choice of reporting to Microsoft or not (reporting produces no suggested fixes).
Have uninstalled .NET Framework 3, 2, 1.1 and 1 and then re-installed them from Microsoft Update but at each stage the error message has been the same. I've also tried Googling for problems with BuildOS, but each just suggests installing .NET Framework 2. Searching for the error message codes didn't producing anything either.
I'm attaching the first screen of the error message but cannot work out how to copy and paste the actual error (it's unselectable).
If anyone has any ideas at all, I'd really appreciate them as I'm out. Thanks for reading this post and please don't flame unless they're REALLY funny!
The attachment doesnt really give much information..
Try print-screening the error and paste it into paint then cut out just the error and post it.. though im guessing it just says something lke unhandled exception or something like that..
You can also try looking around the system error logs in Control Panel\Administrative Tools\Event Log where you might find some details of the error.
have you installed or uninstalled anything in those few weeks?
the only thing I get from that log file is the mscorelib - .NET Framework...
Maybe try MS .NET Compact FW? I have 1.0 SP3 and 2.0 SP1...
Step by step
Lets try to isolate the problem:
Step 1: Try to use an older version of pandora, if its working something is wrong with your download of the latest version.
Step 2: You said that you haven't use the kitchen for some weeks. What have you installed and/or deinstalled since the last use of the kitchen? Maybe another program on your desktop computer is in conflict with .net or the kitchen.
Problem located, just got to fix it now!
Thanks for the suggestions guys, should've thought of the event viewer myself! D'oh!
The report viewer shows the problem is in my .NET 2 installation, so at least I know where to concentrate now.
Time for the big stick with the nail in it, I think!
Thanks again Sam and matt. I know you're both very busy and really do appreciate you taking the time to help.
EDIT: Sorry Gerald, your post showed up while I was typing. Thank you very much for the suggestion and bringing me back to sanity! Will try an older version first, just in case, and then going to play around with my .NET installations.
mattk_r said:
Maybe try MS .NET Compact FW? I have 1.0 SP3 and 2.0 SP1...
Click to expand...
Click to collapse
Uhh, in my world .NET CF runs on a device.
The problem continues...
Bugger - tried a shortcut and it didn't work! Copied the Pandora setup files and installed them on my laptop, only for that to come up with the same error message!
The laptop has very little installed on it and has only been up and running from a fresh install for two weeks. I've got basic drivers, AVG Anti-virus, Spybot and MS Office 2003 installed and that's about it. It's also completely up to date on MS Updates (I'm anal like that) so has .NETs up to 3.0 installed.
I also tried downloading Core's kitchen onto the laptop but again the BuildOS in that reports the same error.
The error shows under Event Viewer > Application as:
Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Date: 14/08/2007
Time: 21:07:36
User: N/A
Computer: MINI-LAPTOP
Description:
EventType clr20r3, P1 buildos.exe, P2 0.0.0.0, P3 45fef3bf, P4 mscorlib, P5 2.0.0.0, P6 461eee3d, P7 331e, P8 119, P9 system.io.directorynotfound, P10 NIL.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 63 00 6c 00 72 00 32 00 c.l.r.2.
0008: 30 00 72 00 33 00 2c 00 0.r.3.,.
0010: 20 00 62 00 75 00 69 00 .b.u.i.
0018: 6c 00 64 00 6f 00 73 00 l.d.o.s.
0020: 2e 00 65 00 78 00 65 00 ..e.x.e.
0028: 2c 00 20 00 30 00 2e 00 ,. .0...
0030: 30 00 2e 00 30 00 2e 00 0...0...
0038: 30 00 2c 00 20 00 34 00 0.,. .4.
0040: 35 00 66 00 65 00 66 00 5.f.e.f.
0048: 33 00 62 00 66 00 2c 00 3.b.f.,.
0050: 20 00 6d 00 73 00 63 00 .m.s.c.
0058: 6f 00 72 00 6c 00 69 00 o.r.l.i.
0060: 62 00 2c 00 20 00 32 00 b.,. .2.
0068: 2e 00 30 00 2e 00 30 00 ..0...0.
0070: 2e 00 30 00 2c 00 20 00 ..0.,. .
0078: 34 00 36 00 31 00 65 00 4.6.1.e.
0080: 65 00 65 00 33 00 64 00 e.e.3.d.
0088: 2c 00 20 00 33 00 33 00 ,. .3.3.
0090: 31 00 65 00 2c 00 20 00 1.e.,. .
0098: 31 00 31 00 39 00 2c 00 1.1.9.,.
00a0: 20 00 73 00 79 00 73 00 .s.y.s.
00a8: 74 00 65 00 6d 00 2e 00 t.e.m...
00b0: 69 00 6f 00 2e 00 64 00 i.o...d.
00b8: 69 00 72 00 65 00 63 00 i.r.e.c.
00c0: 74 00 6f 00 72 00 79 00 t.o.r.y.
00c8: 6e 00 6f 00 74 00 66 00 n.o.t.f.
00d0: 6f 00 75 00 6e 00 64 00 o.u.n.d.
00d8: 20 00 4e 00 49 00 4c 00 .N.I.L.
00e0: 0d 00 0a 00 ....
I know this now definitely isn't a WM6 problem but I'm adding this info in case one of the great XDA Dev minds knows the solution, and in case another user like me experiences the same problem - you're not alone and I'll update the thread when I find the solution!
Here's a stab at it (albeit a simple one). When using Pandora, do you have everything in the proper folder structure? The following applies:
(in this example, everything is thrown into a main folder "Pandora")
- Pandora (parent folder)
- BuildOS.exe (file)
- CreateROM.bat (file)
- pkgcommon.dll (file)
- OEM (sub folder)
- ROM (sub folder)
- SYS (sub folder)
- TOOLS (sub folder)
If you don't follow this hierarchy, Windows will shoot an error out at you.
Good luck!
Thanks Taurus, good suggestion. I've also got an inconsequential Readme.txt file in there too, but other than that - all present and correct!
Again, thanks for all your suggestions guys and once I find the solution I'll be sure to post it up.
You run buildOS from the command line, make sure you cd to the folder containing OEM/SYS/ROM and TOOLS .... THEN run buildOS from wherever it is by typing the full path into cmd, or even better add buildOS to the PATH variable .
so you need to follow this kind of procedure:
Code:
cd c:\ROMFOLDER (ENTER)
then...
c:\ROMTOOLSFOLDER\BuildOS (ENTER)
remember ROMFOLDER and ROMTOOLSFOLDER should be replaced by the paths you use.....its a PITA but thats how it runs.
Confused Stu said:
Thanks Taurus, good suggestion. I've also got an inconsequential Readme.txt file in there too, but other than that - all present and correct!
Again, thanks for all your suggestions guys and once I find the solution I'll be sure to post it up.
Click to expand...
Click to collapse
No problem. I just wanted to clarify what I meant, as I don't know if I was that clear.
I've attached a shot of everything the way it should look. Anyhow, it sounds like you have it right already, but I thought I'd just float that your way.
vp3G said:
Uhh, in my world .NET CF runs on a device.
Click to expand...
Click to collapse
It gets installed with VS Team Suite 2k5, probably since it has the CE mobile device emulators included.
Confused Stu - if you're still having trouble with .NET, let me know. I supported this stuff for M$, and know a few tricks to getting it cleaned up and installed.
Only common factor - interface between keyboard and chair!
OK, I've spent this evening wiping and rebuilding my laptop. It's got XP SP2 on it, then added the laptop drivers, the Kitchen and ran all the Microsoft Updates until only the .NETs were left.
Tried running BuildOS with no .NETs installed, and it came up with a message telling me the application wasn't in the correct state and re-installing it might help.
Installed .NET 1 (same message on trying to open BuildOS), then installed the updates for .NET 1 - same message. Installed .NET 2 and immediately got the original error I was getting on my home PC and other laptop! Went on to install the updates for .NET 2 and finally .NET 3 - but the same error kept coming up.
I've now got this same error coming up my Home PC (self-built), my Dell laptop, and my newly rebuilt Medion one! I've got no common files besides the MS Updates and no common components. Beginning to think maybe it's just plain personal!
Matt - if you can help at all with my .NET problems, I'd be ridiculously grateful. Alternatively, if anyone can suggest another avenue I can try please post it up - I'm almost out of ideas!
I've got another fresh install going on at work (Dell desktop this time) so tomorrow I'm going to try installing only .NET 1 and .NET 2 - not even any other MS Updates. Then if i install the updates one at a time I might be able to work out the problem one. Still not sure why I'm the only person affected by this though?
First of all, you are not alone, have a look at:
http://www.google.at/search?hl=de&q...time+2.0+Error+Reporting+Event+ID:+5000&meta=
Now for the bad news: I checked the first ten posts or so, they recommend to debug the code. But as its running on other machines without any problems it must be something within your .net installion.
man, this is strange.
I had a similar problem with BuildOS but with me it happened anytime I tried to add a package to the OEM folder.
Have you made any changes to anything from the Kitchen?
Matt said that you can't just add a package because its signed ( or something).
FIXED!!!!
Allan1 - you're a star!!!!
I've just deleted out the OEM (and SYS) folders, unzipped the v6 kitchen again and it's worked perfectly! Looks like my problem was I was unzipping the v6.1 (beta) OEM over the top of the existing OEM and that was causing my problems.
Don't I feel like a complete doughnut!
Sorry for wasting everyone's time, and THANK YOU very, very, very much for everyone's help and suggestions on this. It's really touching that so many people were willing to try to help me out.
Now commence the "what an idiot" flaming if anyone wants to - it's justified!
No probs!!
allan1 said:
I had a similar problem with BuildOS but with me it happened anytime I tried to add a package to the OEM folder.
Have you made any changes to anything from the Kitchen?
Matt said that you can't just add a package because its signed ( or something).
Click to expand...
Click to collapse
good looking out...just encountered this problem in HYPERCORE....driving me insane why it wasn't working cuz I just built 3 .nb's in the last few hours.
thanks alot
Related
what a bad luck in 2008.
when i was flashing a cooked Excalibur rom to my phone my cat touched my usb cable with his tail...only touch. The cable did not disconect from the phone physically...but maybe the static or whatever effected...the RUU gave me a communication error and let me unplug the cable and battery for recovery.
but the result is bad, the phone stop boot in the first screen, and my uspl has been flashed to 1.33(it was uspl 1.11 before )
now the situation is...i can enter the bootloader(tri-color). but i can not flash other roms, I tried wm5 from dopod singapore and htc wm6 both give me an invalid ID error
my phone was from dopod taiwan....
please help, any advice suggestion will be appreciated...thank u
if anyone can offer a proper ROM file from DOPOD taiwan, that will be very useful...thanks in advance.
if there is someone who are using a dopod c720w from taiwan, please help to dump two files from your phone.
just run simlock.bat from attachment...thanks
please remove .zip extension for those bin file....thanks jockyw2001
same problem with my jasjar i was upgrading and my light wentout and when i tried again it gave me invalid country ID and still no solution!!!!!!
thank you anyway....anyone have a working solution?
i am trying to use RUU_signed-with-uspl.zip
still downloading...and waiting for more help...
update
bad bad....i try to flash the RUU_signed-with-uspl.zip
it gives me
"the image file is corrupted"....how about now?
any help?
did u try a hard reset? i have no idea if it will help, but u might get lucky
-jd
Try flashing the original rom from SD card
If you haven't got it fixed yet, you could try flashing from your SD card. I have done this with my T-Mobile Dash several times and it works. Search the forum and you will find the instructions I posted some time back. Hope this will help. From my understanding this is also the method used by manufacturers, but they have a special SD card they use for different utilities.
P.S. You must use a matching ROM (Vendor ID and CID) for your device with SD flash. T-Mobile Dash should be flashed with T-Mobile ROM, HTC S620 should be flashed with HTC ROM, Rogers... etc.
mar11974 said:
If you haven't got it fixed yet, you could try flashing from your SD card. I have done this with my T-Mobile Dash several times and it works. Search the forum and you will find the instructions I posted some time back. Hope this will help. From my understanding this is also the method used by manufacturers, but they have a special SD card they use for different utilities.
P.S. You must use a matching ROM (Vendor ID and CID) for your device with SD flash. T-Mobile Dash should be flashed with T-Mobile ROM, HTC S620 should be flashed with HTC ROM, Rogers... etc.
Click to expand...
Click to collapse
thank you, but the problem is that i can not find a proper ROM for my device, there is rom from "dopod singapore" "HTC" "TMO" "ROGER"....but none of those are from DOPOD taiwan....I tried the ROM from "DOPOD singapore" with no luck...
jdhelstrom said:
did u try a hard reset? i have no idea if it will help, but u might get lucky
-jd
Click to expand...
Click to collapse
thank u anyway....hard reset won't work....the flash process stopped at 24%...I think the OS part has not fully flashed into the device...
falleny said:
thank you, but the problem is that i can not find a proper ROM for my device, there is rom from "dopod singapore" "HTC" "TMO" "ROGER"....but none of those are from DOPOD taiwan....I tried the ROM from "DOPOD singapore" with no luck...
Click to expand...
Click to collapse
Normal flash via USB or flash via SD card?
mar11974 said:
Normal flash via USB or flash via SD card?
Click to expand...
Click to collapse
via USB use RUU...any problem? haven't tried card flash yet...ok, one more try now.....its 5 A.M now...another sleepless night...
falleny said:
via USB use RUU...any problem? haven't tried card flash yet...ok, one more try now.....its 5 A.M now...another sleepless night...
Click to expand...
Click to collapse
no luck....sd flash gets invalid certification...
thanks jockyw2001
I don't know which keyword should I grep...but i do found some CID error and EXCA100 EXCA10000 there...
I believe the vendor ID is HTCS
48544353
also I can find
H...T...C...I...
M...A...G...E...
EXCA10000
falleny said:
I don't know which keyword should I grep...but i do found some CID error and EXCA100 EXCA10000 there...
I believe the vendor ID is HTCS
48544353
also I can find
H...T...C...I...
M...A...G...E...
EXCA10000
Click to expand...
Click to collapse
The modelID is EXCA10000
The CID is not yet clear from your dumps.
I will check how you can easily find it.
i tried to dump the raw data with diffrent ROM update
something interesting...
I found EXCA20000 both in dopod singapore ROM and HTC WWE ROM
and found EXCA10000 when I tried to update USPL only
so I think EXCA10000 or EXCA20000 is something in the nbh file?
I found the diffrence between Dopod and HTC...
DOPOD001 in the dopod dump
HTC__001 in the HTC dump
11111111 in the USPL dump
in the same position of the raw date....I think this is vendor ID in the ROM and Model ID is the same EXCA20000 in both dopod and HTC rom.
bad news is that I still can not find my CID and Model ID....still struggling with those huge raw date...
i found the flash procedure already broken at 2%...but something still copying until 4%
I found it at row 655634
Code:
DO 48 54 43 45 HTCE
DI 4d 53 5f 43 45 52 54 5f 52 41 57 0d 0a MS_CERT_RAW..
DI 62 72 65 61 6b 0d 0a break..
DI 48 54 43 53 01 00 01 00 00 00 00 00 48 54 43 45 HTCS........HTCE
DO 70 72 6f 67 72 65 73 73 20 32 0d 00 00 00 00 00 progress 2....
mean less character stopped at row 131192
Code:
DO 48 54 43 45 HTCE
DI 4d 53 5f 43 45 52 54 5f 52 41 57 0d 0a MS_CERT_RAW..
DI 62 72 65 61 6b 0d 0a break..
DI 43 68 65 63 6b 49 6d 67 48 65 61 64 65 72 20 0d CheckImgHeader .
0a .
DI 44 65 76 69 63 65 20 4d 6f 64 65 6c 20 49 44 20 Device Model ID
3d 20 45 20 58 20 43 20 41 20 32 20 30 20 30 20 = E X C A 2 0 0
30 20 30 20 00 20 00 20 00 20 00 20 00 20 00 20 0 0 . . . . . .
00 20 00 20 00 20 00 20 00 20 00 20 00 20 . . . . . . .
DI 00 20 .
DI 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 . . . . . . . .
00 20 0d 0d 0a . ...
DI 48 54 43 53 02 80 02 00 00 00 00 00 48 54 43 45 HTCS........HTCE
DO 70 72 6f 67 72 65 73 73 20 34 0d 00 00 00 00 00 progress 4......
hope it helps
No, all you see are the IDs of the image you try to flash and not the ones of your device
I have to play with my Vox bootloader and see if there is a command. Vox and Excal are very similar.
You could look up a thread I did in the Vox forum ("Vox bootloader" or so)
bump...and thanks jockyw2001 for all his help these days
falleny said:
bump...and thanks jockyw2001 for all his help these days
Click to expand...
Click to collapse
My pleasure. The IDs of the excalibur you posted above are:
CID = DOPOD601
ModelID = EXCA20000
So your challenge is to find an official ROM which has these characteristics.
The description of such a ROM is very likely "traditional chinese (TCH) for Excalibur".
Any officially signed RUU_signed.nbh file which has the string DOPOD601 at offset 0x1E0 and the string EXCA20000 at offset 0x40 will do.
HTC WP7 NBH Dump/Rebuild:
NBHImageTool
flash.store.bin Dump/Rebuild (dumped as os.nb in NBHImageTool):
(tool creation pending)
IMGFS Dump:
Combine xidump with the attached cecompr_nt.dll supporting XPH
IMGFS Build:
Combine imgfsfromdump with the attached cecompr_nt.dll supporting XPH
XIP/ULDR Dump:
dumprom works well for this.
XIP/ULDR Build:
(tool creation pending)
I'll be posting updates in my twitter, which you can reach by clicking the image in my signature below.
That's great
Thanks
awesome, best of luck;]
Thank for this
thanks. let us know if you need something...
i'm sure we can get more donations if needed...
Good luck in your attempt my friend.
A small appreciation from my side
Transaction ID: 3HV21374WY1903845
Relocation Module SYS/Dump:
Creating tools...
Command Dump IMGFS:
Code:
xidump imgfs.bin
Create Packages from Dump:
Combine Packagebuilder with the attached cecompr_nt.dll supporting XPH
Another method Dump XIP:
XIPPort - Bepe's
Region PagePool:
during the detection..
Generation File imageinfo.txt:
Command:
Code:
iitp [ -p physfirst ]
Download: IITP - imageinfo.txt producer.
XPR to XPH Compression:
Open the file os.nb.payload in HEX Editor. Find this Lines:
Code:
F8 AC 2C 9D E3 D4 2B 4D BD 30 91 6E D8 4F 31 DC ř¬,ťăÔ+M˝0‘nŘO1Ü
01 00 00 00 01 00 00 00 01 00 00 00 34 00 00 00 ............4...
08 00 00 00 00 02 00 00 00 10 00 00 58 50 52 00 ............XPR.
And change to:
Code:
F8 AC 2C 9D E3 D4 2B 4D BD 30 91 6E D8 4F 31 DC ř¬,ťăÔ+M˝0‘nŘO1Ü
01 00 00 00 01 00 00 00 01 00 00 00 34 00 00 00 ............4...
08 00 00 00 00 02 00 00 00 10 00 00 58 50 52 00 ............XPH.
Save this file. Get this library cecompr_nt.dll (attached in first post), then insert to TOOLS folder from your Kitchen ROM.
Download cecompr.dll (attached) and overwrite it in your XIP.
Useful module to compress XPH:
You're doing great work,
I hope you'll succeed.
Good luck
lets keep this on track, roms will be developed as they can be, asking for specific hardware won;t make any difference and only take the threads off track.
this is a nice clean thread for the real WP7 work going on, looks like we have sorted the compression issue,
looking forward to what Da_G finds with the JTAG on the HD2.
chrispilot2293 said:
why do you say that about Topaz how do you know that we wont get it.
Click to expand...
Click to collapse
Lots of posts in the other threads on this topic. There's lots of reasons but the main one is that non-Cortex A8 (ie Snapdragon) devices are not capable of executing code compiled for the ARMv7 instruction set. WP7 is compiled under ARMv7. To recompile for ARMv4/5/6 would require the original source code to WP7 which there's practically no chance of getting. Even IF that somehow leaked out, it would still run so poorly that it would be unuseable.
good luck da_g. endevours from indian in australia
What is difference between XPR and XPH? More importantly, I'd love to know how to rebuild cecompr_nt.
Does your cecompr_nt_xpr_xph.dll still support lzh?
If XIP/ULDR can be dumped w/ existing tools, what prevents existing tools being used for reconstruction?
gguruusa said:
What is difference between XPR and XPH? More importantly, I'd love to know how to rebuild cecompr_nt.
Does your cecompr_nt_xpr_xph.dll still support lzh?
If XIP/ULDR can be dumped w/ existing tools, what prevents existing tools being used for reconstruction?
Click to expand...
Click to collapse
No.... only XPR/XPH
Just made my donation. Just for the effort your giving. Thanks.
Just sent you a donation, looking forward to rocking my HD2 with Win7! Thanks man!
didn't the leaked spec sheet of wm7 state armv6 and above?
am i just behind the times
thanks for everyones work
Da_G said:
HTC WP7 NBH Dump/Rebuild:
NBHImageTool
flash.store.bin Dump/Rebuild (dumped as os.nb in NBHImageTool):
(tool creation pending)
IMGFS Dump:
Combine xidump with the attached cecompr_nt.dll supporting XPH
IMGFS Build:
Combine imgfsfromdump with the attached cecompr_nt.dll supporting XPH
XIP/ULDR Dump:
dumprom works well for this.
XIP/ULDR Build:
(tool creation pending)
Click to expand...
Click to collapse
Amazing work Da_G! Thanks for sharing your knowledge!
zole2112 said:
Just sent you a donation, looking forward to rocking my HD2 with Win7! Thanks man!
Click to expand...
Click to collapse
It is not certain that it will work, dont get your hopes up or your kickers in a twist if it comes do nothing.
Silently hoping it does however but we shall have to wait and see.
ID transazione: 6NA49355LX5868833
A small gift for your great work
Please let us Know if Donations can help, I would invest $100 or even more so that the HD2 sees the Light.
and Please guys, we invested and accepted donations to buy an HD2 Plus the Trace32 App, so let's focus on developing Win 7 for HD2 currently, later, I think that other devices can reap the benifits too.
Best of Luck to you Da_G
Will
This is excellent news!
Read here: Sholes Keyleak Explained
and here: Twitter Feed
It won't be long now!
Great news I hope Cyanogen is ported soon. And hello to Gingerbread.
Very nice!!!!!!:d
It's a shame Eugene_373's Defy bit the dust.
We could really use a Dev of his skills now.
How can I get the variable s and data?
k = s - sha1sum(data)
P.S.: His explanation: the vulnerability is that p is 0, which makes r=1, which makes s = sha1sum(data) - k
Did you get the keys posted on Twitter?
psicodelico said:
How can I get the variable s and data?
k = s - sha1sum(data)
P.S.: His explanation: the vulnerability is that p is 0, which makes r=1, which makes s = sha1sum(data) - k
Click to expand...
Click to collapse
Beach_Head said:
Did you get the keys posted on Twitter?
Click to expand...
Click to collapse
that is for milestone, we need the values from Defy to found the Key.
Have you tried?
There's no mention that the key is different for all phones using the Sholes platform...
psicodelico said:
that is for milestone, we need the values from Defy to found the Key.
Click to expand...
Click to collapse
No, I didn't try yet. I'm just waiting... . Let the things happen.
I'll be testing it when I get home.
I hope I don't brick my device in the process...
psicodelico said:
No, I didn't try yet. I'm just waiting... . Let the things happen.
Click to expand...
Click to collapse
Great news. Hope other devs jump into this right away. Will be looking forward.
Maybe is easier to post the keys here:
7e 21 a8 37 64 12 75 a3 47 13 54 42 12 48 58 12 71 a4 5e 41 a7 64 72 34 2a 6f e2 0a 97 8f <== sholes private key
97 6a 21 7a 67 41 37 9f 26 53 4a 61 7f 2a 86 ae ff 71 21 78 2e 61 4f 71 90 3e 00 27 fe 9b <== initialization vector
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <== nonce (e)
Click to expand...
Click to collapse
Taken from William Pitcock twitter: http://twitter.com/nenolod
Hi, but what does it meen?
What can we do now?
And how?
Can we crack the bootloader?
Custom ROms?Kernel?Cyanogenmod 7 for defy??
Sweet maybe in the future there'll be a cool rom for my Droid 2 global
Sent from my DROID2 GLOBAL using XDA App
But what we have to do now?
What can we do with this information an keys?
So we gettin custom kernels soon?
Sent from my thumbs
Your recovery must update the signatures on the Codegroup Descriptor Table (CDT). If it does not, your recovery will brick the phone if you attempt to flash a custom ROM.
I understand nothing ))
Who can do this?
Where are the defy gurus!!!!
I can't belive it! It must to be an april fool! *_*
totally awesome *.*
can't wait to see the first custom kernels
Hi everydbody,
i'm working on a software to change oem and channel id for windows store (8.0, maybe 8.1...)
i've managed to see surface pick, or lenovo pick on my asus vivotab, but i don't know other oem channel ID.
in order o make a database, i need help !
could you go to: (win+R)
%localappdata%\Packages\WinStore_cw5n1h2txyewy\AC\Microsoft\Windows Store\Cache\0
and post in reply this file with your pc model in comment :
0-Channel-https∺∯∯next-services.apps.microsoft.com∯browse∯6.2.9200-1∯670∯Channel.dat
this file doesnt contain any personal data, juste channel and Oem ID
thanks!
feherneoh said:
09 AA 98 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Lenovo B560
Click to expand...
Click to collapse
Hi ferneoh
thank you, if you replace 09 AA 98 by 97 C5 98 for exemple you willhave access to samsung picks.... but i can't download from oem store for now...
My Surface RT only have file "0-Channel-https∺∯∯next-services.apps.microsoft.com∯browse∯6.2.9200-1∯670∯Channel∯Surface%20RT.dat"
ฺู™ 0 0 0 0 1 0 9 8 9 4
That all from it.
That file is a binary data file. Opening it notepad doesnt represent the actual data (although it does attempt to parse it as plain text anyway).
I'd love to be able to use this to install Nokia's proprietary apps onto my Surface... please make this happen!
Anyone looked into this, yet?
I am trying to flash stock .tot file to my g3 f400s using lg flash tool. It stuck and give time out error after 2-3 hrs. Any idea how to fix this issue. My phone is Soft bricked now, going to always firmware update screen on power up. Please help. Attached is the screen shot.
Error logs:
[10: 9:13] [T1048608] 57 52 54 45 0E 00 00 00 00 D8 00 00 00 00 00 00 00 00 00 00 00 00 10 00 79 B4 00 00 A8 AD AB BA WRTE....................y.......
[10: 9:18] RX Timeout : 5000 seconds
[10: 9:18] LAF_Packet Error, Error reason is 0
[10: 9:18] We can't communicate with Phone[WRTE_Packet]
Please help. I am stuck from two days.
Issue is fixed after i switched to Win 7. Problem was with Win 10.