I have a parrot 3200 in my car is it posible a can have the sound of tomtom 6 on my p3300 with bleutooth connection by parrot in my carspeakers.
Can somebody tell if it possible and what must change in my phone.
Thanks.
http://forum.xda-developers.com/showpost.php?p=1396007&postcount=2
BTaudio.cab d'not work
Fracoon said:
http://forum.xda-developers.com/showpost.php?p=1396007&postcount=2
Click to expand...
Click to collapse
Ihave downlaod btaudio.cab on my phone with rom B&B 4.0.
He answer me always "failed to enable BT audio".
you can tell me what I do wrong or it will not work with this rom.
Thanks.
i have b&b v4..... for me it works fine....
1. Pair your device
2. Set the device as Hands-Free
3. Make sure you are near enough and have activated bluetooth
4. Run BTAudio
its the way it works for me
try this one.
PS: Start BT Audio before u start anything you want to hear over bluetooth
Works perfect now. Using is important
Fracoon said:
i have b&b v4..... for me it works fine....
1. Pair your device
2. Set the device as Hands-Free
3. Make sure you are near enough and have activated bluetooth
4. Run BTAudio
its the way it works for me
Click to expand...
Click to collapse
Works perfect. Thanks for instruction.
I can't get it to work in my car! I have a JVC BT1 and it has bluetooth built in. It works fine with calls (i.e. thru speakers) but tom tom only goes thru the unit. So I tried this BT thingy and it doesn't work. I can turn the program on but still nothing. What does it mean, set the device to handsfree?
Thanks
Jon
Related
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
I'm using my O2 XDA Orbit as a GPS, using the supplied Co Pilot software. It works well, but I'm wondering if there's way to get the directional instructions to come via the bluetooth headset ??
It's not a bind when I use it in the car, but I'll be mounting the unit to my bike as well and I won't be able to hear directions, with my helmet on
Try the normal handsfree(wired)
Well I use TomTom on my MDAC3, and do get the instructions on my wired handsfree.
I want to believe you can do the same with your bluetooth headset....but make sure u pair them first before starting the Co-pilot.....
Advice of your experience
May be this software
Blue Music Link Here
http://forum.xda-developers.com/showthread.php?t=306642
Gajet said:
http://forum.xda-developers.com/showthread.php?t=306642
Click to expand...
Click to collapse
Cheers. Worked like a charm.
I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!
Try this
Had similar in a BMW...
Try www.jetwaremobile.com
Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.
Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !
RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?
TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.
I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?
My Orbit works fine with my Nokia CK-7W using a B&B ROM.
Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?
No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.
Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.
I have the O2 Orbit with Co-Pilot software that came with it. I connect the Orbit via bluetooth to the intercom system on my motorcycle. The phone connects automatically every time and I can receive calls as I ride, and listen to WMP (though I prefer to use my ipod).
I set the Co-pilot running the other day but none of the commands would come through the bluetooth connection into my helmet. Do I have a setting wrong or will this not work?
Thanks in advance.
You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio
mikealder said:
You want btaudio installed to the unit IIRC, have a read of this thread where there is also a download for the plug in to enable the nav voices out through the headset - Mike
http://forum.xda-developers.com/showthread.php?t=306642&highlight=audio
Click to expand...
Click to collapse
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...
you need to turn the app on if you go to the bluetooth menu and while the helmet is turned on touch and hold the helmet bluetooth name and select set as bt audio if this is not present the use mikes method it all depends on wheather the helmets bluetooth is compatable with the artimis
Garneth said:
Thanks mike.
I have installed it but it doesn't seem to route the audio through the bt to my helmet, but I'll try again later. Do I need to activate btaudio every time I want to use it or will it run automatically?
I couldn't find the 'plug' you mentioned above...
Click to expand...
Click to collapse
Two ways to do this - get a bluetooth headset that supports A2DP streaming ( I have a Sony DR-BT30Q) then all audio comes through the headset.
Alternatively, use VJvolubilis (http://www.vijay555.com/?Releases:VJVolubilis) - you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device. It worked for me on a BMW car kit!
Thanks guys.
Alix, I'll try that when I get home. The b/t must be compatible as I can receive phone calls on the bike and listen to WMP.
TT, I have no choice but to keep the headset I have as it is part of the wired intercom system and is fitted into my helmet. The b/t connectivity comes through a dongle supplied by the intercom manufacturer and sits beneath the seat with the intercom controller. It works fine with some apps, but just not Co-Pilot.
Not sure what this means :
TangerineTractor said:
...you'll need to set up a shortcut to run it with -agon to stream all audio through your bluetooth device.
Click to expand...
Click to collapse
Thanks again.
Hi,
I am looking for a way to stream audio from the Touch HD to my Car. Unfortunately the cars built-in audio system doesn't support bluetooth. But there is that handsfree-thing, which works really great with calls. So I wondered, if there is a software solution that streams my music from the phone as "incoming call" to my car?
I've tried "acbToggleBT" and "BTASP" and both didn't work in the Car, but they did work with a bluetooth headset.
It would be really great if somebody knows, finds, posts, programs or has an solution.
Thanks in advance!
Greets from Bavaria, Germany
berkley
I can't remember but there was an option to route normal audio to the bluetooth handset in my HP iPAQ which is missing from HD.
Believe me music streaming to HSF device will be as good as listening to AM radio on poor reception. Go get a bluetooth A2DP profile audio headunit like Sony - MEX-BT2500 (this is the one I use and works like a charm).
Thanks for your reply.
Perhaps I took the wrong words to explain what I am looking for.
The thing I want is a piece of software that "imitates" an incoming call and sends the audio from S2P to the handsfree of my car.
Maybe this explanation is a bit better...?
[edit]
have you tried BT Audio
it's a paid app
acbToggleBT always worked for me
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
camro said:
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
Click to expand...
Click to collapse
Excellent. I can get this to work via bluetooth headset.
Unfortunatley this didn't work in my car (which is what I believe the OP wants).
http://220.232.214.116:8088/attachmentes/Day_071224/31_270270_b7dcc_pxdxa.btaudio.zip
I use this application, works terrific!!.......enjoy
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
binning said:
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
Click to expand...
Click to collapse
All i can say is this based on using it on my HD with WM 6.1 & 6.5 (Dutty ROM):
Once you install the program and then execute it (Press On):
It will transfer all Music & Audio from Movies (Core Player) etc. to my BT Nokia Headset or my BT Car Speakerphone (Motorola T305), i do not have a Radio BT set so i can't tell you, you'll just have to try.
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Hi Ausi, tried on my Nokia BT car handsfree but no joy
The handsfree only accepts an incoming call as stated above so some sort of emulation may be needed. Would be happy if someone knew about something...
ausi said:
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Click to expand...
Click to collapse
Funny... my HD does the reverse. I get de BT audio but on the BT phone I got nothing but static...
I've got a Sony Xplod bluetooth radio in my car.
When I start up it automatically connects to my HD, however it only connects as handsfree rather than both handsfree and BT stereo.
I have to go into comms manager and bluetooth settings, then select and hold on the xplod in the device list.
A menu comes up asking what I'd like to connect as, and I pick stereo, then repeat for handsfree.
Give that a go. Holding on the device to bring up the menu gives you the BT profiles the device is capable of, so with a bit of luck stereo/headphones will be an option for you.