Hi everyone,
I configured my artemis to collect MMS threw the
gprs; but since, the weather tab keeps connecting to
the GPRS to try and update.
Is there i reg fix to stop this and only let it connect
threw WI-FI?
thanks
When you click on weather to change city - right side menu\weather options - turn off auto.
No way only to use wifi unless you delete devices gprs settings.
i already answered the same question here. it's not really what you are asking about, but for me it solved the problem
edit: you can also disable the auto update, but then it will never auto update, even if you are connected via WLAN.
thanks for the answers
Related
hi
i have lost all of the wifi settings on my xda exec after doing a hard reboot and doing a coparate install!!! i have found the mms/gprs settings in one of the forums via a cab file but does anybody have such thing for the wifi or even just has the setting for it!!!
cheers guys
Is this a not-so-clever phishing attack on peoples wifi networks??
There are no settings for wifi.
The wifi config is dependant on the network you connect to, when you use a wifi network you get the settings from the owner/operator of that wifi network.
nope, it just me being silly now, i've just realised what to do after you've just said it!! silly me
thanks
Hello all.
Here are all of the known problems that I am having. with WM6 2.01.
(1) Icons on top (connection bubble) never change with the exception of ActiveSync. 3G icon constantly stays on even if connected through WiFi. Shutting phone off still shows Cingular bars as if connected. (Known issue)
(2) Soft button configuration changes do not stick. If I change the programs associated with them, it does nothing.
Also, today screen shows Calendar and ActiveSync as soft key programs, although programs are actually Calendar and Contacts. (Its all jacked up!)
(3) I cannot connect to the internet with my celluar service. It is as if there are no settings installed. The bottom of IE says "Connecting ... 0 KB." Then I get a message saying "Cannot connect with current connection settings. To change your settings, tap Settings."
I have tried turning on/off, soft reset, etc., but have had no luck
---I have searched the board for an answer to #3, and I have found many people who have similar problems (does not work after 30 min, soft reset will fix), but I do not remember seeing anyone whose settings have completely dropped.
Can anybody shed any light into any of these 3 problems? I really do not use Bluetooth, so I haven't tried anything with it yet. But all other problems I have had, I have been able to fix by myself.
Thanks,
Kangle
Kangle said:
Hello all.
Here are all of the known problems that I am having. with WM6 2.01.
(1) Icons on top (connection bubble) never change with the exception of ActiveSync. 3G icon constantly stays on even if connected through WiFi. Shutting phone off still shows Cingular bars as if connected. (Known issue)
(2) Soft button configuration changes do not stick. If I change the programs associated with them, it does nothing.
Also, today screen shows Calendar and ActiveSync as soft key programs, although programs are actually Calendar and Contacts. (Its all jacked up!)
(3) I cannot connect to the internet with my celluar service. It is as if there are no settings installed. The bottom of IE says "Connecting ... 0 KB." Then I get a message saying "Cannot connect with current connection settings. To change your settings, tap Settings."
I have tried turning on/off, soft reset, etc., but have had no luck
---I have searched the board for an answer to #3, and I have found many people who have similar problems (does not work after 30 min, soft reset will fix), but I do not remember seeing anyone whose settings have completely dropped.
Can anybody shed any light into any of these 3 problems? I really do not use Bluetooth, so I haven't tried anything with it yet. But all other problems I have had, I have been able to fix by myself.
Thanks,
Kangle
Click to expand...
Click to collapse
Did you put your connection settings back in after you upgraded to WM6??
No, but I didnt save them.
My Wi-Fi is working fine, but I had to config those. On other updates I had done prior, my 3G connection was fine without having to setup settings.
If you have not already done this, you have to go under connections and set up your providers settings. To enter proper settings go to Start/Settings/Connections Add a new modem connection. Enter any name you want for the NAME ( example "Cingular ISP") and make sure that under "select a modem" tab, "Cellular Line (GPRS, 3G) is sellected. Click next access point name can be what ever you want to call the provider connection (Example "wap.cingular" or "isp.cingular"). And the rest I can not help you with untill we know who your provider is. I am sure if you let us know what provider you have, some one here can post the settings you need to have.
Hope this helps or at least gets you pointed in the right direction.
Awesome. Thanks for the help.
I am to the point where I need to enter user name, password, and domain. I wonder if I am going to need to call Cingular to find out some of that info (password).
Can anybody help me out with those settings?
Thanks,
Kangle
see https://www.cingular.com/support/deviceConfig.do?content=KB71396.html
but, if you had used the "SEARCH" button you would already have found this...
Go to https://www.cingular.com/support/deviceConfig.do?content=KB71396.html for the settings.
Now I have a quick question that I need to have cleared up. When I connect onlince with my CIngular 8525 it always connects via GPRS/EDGE and not 3G. I do not see a 3G icon come up. Is this becasue there is no coverage at my home? Or did I mess up something?
I am using:
LVSW WM6 RUU_Hermes_WWE_3.30.0.1 [FIXED]
Hard SPLv7
I used the cingular setting cab found from the WIKI
I am using radio 1.40.30.00
Band setting under phone are set to auto
BUMP THAT said:
Now I have a quick question that I need to have cleared up. When I connect onlince with my CIngular 8525 it always connects via GPRS/EDGE and not 3G. I do not see a 3G icon come up. Is this becasue there is no coverage at my home? Or did I mess up something?
I am using:
LVSW WM6 RUU_Hermes_WWE_3.30.0.1 [FIXED]
Hard SPLv7
I used the cingular setting cab found from the WIKI
I am using radio 1.40.30.00
Band setting under phone are set to auto
Click to expand...
Click to collapse
This would be difficult to answer, since we don't know where your home is. May I recommnd you visit THIS LINK
I have been trying to login Messenger Live with Wifi...but it always use gprs instead when my connection is active...
and even my gprs is on...its times out..saying that i need to find a place for better connection and so on..
but why it doesnt connect directly using wifi??
Is there a way to fix the issue? it never happen with wm5's msn
Thanks again
Mike
when the gprs bubble pops up... press cancel.
then it uses wifi. problem fixed. why it tries gprs by default i would assume is due to mobile.
once i cancel works perfect over wifi until i move out of range.
I'm using Black 2.0 and changed the connection settings to 'Work network' (settings-connections-connection-advanced-select networks-my work networks) now I dont get the annoying gprs connection trying to start, just uses the wifi I have set up. Let me know how that goes.
dear all...thanks for the great help
falum...i did ur setup and i dont have the gprs pop up again...many thanks
but the other issues comes in...it often say that i cannot connect..(even when i was on gprs)...do you have the same problem beforee??
Im using the live version that is cracked (no time limited) that i download from here..im really confuse to which version i should get (since some said it expired)...
if its possible...can you direct me to the thread to the correct one??
Thanks again!
Mike
Hey all,
My TP2 no longer works on internet or email using wifi. 3G, etc is fine, but when wifi is turned on, it will not open a page. Tried Opera and IE. On email I get a sync error unless the 'Data' connection slider is 'On.'
What settings am I supposed to see in the connections section? I must have changed something without knowing. Tried searching a couple of forums, but I think I'm the only one with this situation. Hopefully it's something silly and I'll pop myself in the forehead for not figuring it out...
Thanks for the assist,
OZ
me too...
just thought i'd let u know you are not the only one with the wifi problem. i will let you know if i find a fix...
I have a Tilt2 and have the same problem. It connects to a wifi network but then won't actually pass any data back and forth (even the Data Connection switch in "Communications" is greyed out). Frustrating. Any ideas?
I have several more weird problems with my Tilt 2 which has been flashed with the WXW version 2.10.50212114. I just moved to Dallas and the weather on the home page shows Houston instead of Dallas. Before wherever I was at I would get that weather.
Another issue is since moving to Dallas I cannot get my personal e-mails on my phone. It just runs and runs and finally errors out. It also hangs up when disconnecting. I do not know if this is a phone issue or an AT&T mail issue. I have a Bellsouth e-mail address
One more issue is whenever my phone and the bluetooth in my truck connect the phone goes to my music on my phone. This seems like it would be a phone issue.
Any ideas?
I was able to get my e-mail working, but have not been able to resolve the other two issues.
Any ideas out there???
reubenray said:
I have several more weird problems with my Tilt 2 which has been flashed with the WXW version 2.10.50212114. I just moved to Dallas and the weather on the home page shows Houston instead of Dallas. Before wherever I was at I would get that weather.
Another issue is since moving to Dallas I cannot get my personal e-mails on my phone. It just runs and runs and finally errors out. It also hangs up when disconnecting. I do not know if this is a phone issue or an AT&T mail issue. I have a Bellsouth e-mail address
One more issue is whenever my phone and the bluetooth in my truck connect the phone goes to my music on my phone. This seems like it would be a phone issue.
Any ideas?
Click to expand...
Click to collapse
For the weather problem, try updating with the 3G radio disabled in Comm Manager.
For the Bluetooth issue. all I can say is that some radios play better with different devices.
There is not a setting for the 3G radio on Comm Manager. Below is what is there.
Airplane Mode
Phone
Bluetooth
Wi-Fi
Microsoft Direct Push
Data Connection
Wifi Router
Everything is on except for Airplane Mode and WiFi Router.
reubenray said:
There is not a setting for the 3G radio on Comm Manager. Below is what is there.
Airplane Mode
Phone
Bluetooth
Wi-Fi
Microsoft Direct Push
Data Connection
Wifi Router
Everything is on except for Airplane Mode and WiFi Router.
Click to expand...
Click to collapse
Well, I don't know which ROM you are using, but the setting can also be found in Start > Settings > Connections > Advanced Network. There should be a drop down box there. Set it to Disable. This will make it so the device only connects to GPRS or EDGE networks. This should allow you to update the weather location without a problem.
cajunflavoredbob said:
Well, I don't know which ROM you are using, but the setting can also be found in Start > Settings > Connections > Advanced Network. There should be a drop down box there. Set it to Disable. This will make it so the device only connects to GPRS or EDGE networks. This should allow you to update the weather location without a problem.
Click to expand...
Click to collapse
I found the setting and disabled it. This disabled HSDPA/HSUPA. I then did a reset, but it is still showing Houston instead of Dallas which is where I am right now. Checking the GPRS setting it is asking if I want PAP or CHSP authentication.
reubenray said:
I found the setting and disabled it. This disabled HSDPA/HSUPA. I then did a reset, but it is still showing Houston instead of Dallas which is where I am right now. Checking the GPRS setting it is asking if I want PAP or CHSP authentication.
Click to expand...
Click to collapse
If that still isn't working, then the only other things I can suggest are to ask your carrier to reset your connection to the network, or input the location manually. JVH3 made a Weather City Editor app that will add cities to the list if Sense doesn't have them by default.