Bluetooth A2DP with Orb Live TV? - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hello,
I just got an AT&T 8525 for about two weeks. Thanks to the contributors of this community I have my phone setup such that it can do almost anything my laptop can do (other than CAD...).
Anyway, I have been running orb live tv or videos smoothly but when I tried to use my bluetooth A2DP headphones while running orb, the video is very choppy...
I already done some search on this forum but nothing came up. I don't have audio stuttering issue, just video stuttering.
Does anyone know any special setting on TCPMP or bluetooth that can help me out with this issue?
I'm running VP3G's v3.0 WM6 and the bitpool on A2DP is set to 48 (but I'd tried all other setting already)...
Thanks,

Related

Multimedia and wireless headphones

I am trying to resist the temptation of getting a video iPod or even the new SE990i, since my BA (Orange M2000) is well capable of playing videos and MP3. And I am quite happy with it as an organizer and its communication capabilities. I was wondering for those that have turned your BA into a portable multimedia machine, if you could give me some pointers on:
1) What software you use to convert videos into a capable format for playing on the BA.
2) I have researched the bluetooth wireless stereo headsets for the PDA2k, and hacen't found any satisfactory solution. I have upgraded my BA with the latest bluetooth stack, which now supports A2DP. Do you own any headset that you would recommend?

Cingular 8125 and Logitech Ipod Bluetooth Headphones

Hi,
I followed all the instructions on adding a2dp to my ppc, I upgraded the rom,etc and ran the tornado thing. My 8125 sees the headphones and has the wireless stereo service, however, it does not actually connect to them as they even after I find the headphones theyt are still in discovery mode. Any ideas anyone.
I have exactly the same problem. I'll post the solution when I figure it out. I phoned iogear and they told me to set my 8125 to send the audio to the headphones instead of the speaker. Not helpful.
solution found
upgrade to the latest beta rom 225 and it should fix it
Sending all audio over bluetooth
Had similar problem when trying to send music from phone to the headphones. Found the tool, see attached, that has three small programs. There is a bit that has to be changed to tell the device to send all audio to the headphones, otherwise it just does it for phone calls.
The BTAudioOn forces the bit on. BTAudioOff forces the bit off. Just put them onto your device and run them directly. There is a also a toggle program, but it isn't intelligent. It does not query the system and toggle, but instead has its own tracker which gets out of synch.
Hope this helps. My apologies for not crediting the creator of the program, but I believe I found it at Microsoft's site.
Audio quality was very poor due to bluetooth on device. I tested with very old Cingular ROM. Have not tested with the latest 2.25 Cingular ROM to see if there is any improvement. Used Motorola's Stereo Bluetooth headset and also iPhone Stereo Headset with similar results.

TT6 using A2DP?

Hi, I've been experimenting with A2DP on my own Prophet and a friends Wizard. We've sorted streaming music wirlessly without skipping. Seems to work OK However we would like to somehow get the TT voice instructions broadcast over BT too. Is this a bit of a struggle with these underpowered machines or does it just require a couple more tweaks?

Trouble with Wifi and Bluetooth at same time

I've searched around for this and can't find anything, so maybe someone can help to point me in the right direction or let me know that at least the problem is known but not fixed yet.
I can't get Wifi and Bluetooth to work on my 8525 with WM6, currently using Schap's 3.54c rom and radio version 1.48.
I have motorola s805 stereo bluetooth headphones and would like to stream radio over my work's wifi and hear it on my headphones.
The problem is Neither wifi or bluetooth work reliably when used at the same time, (no problems individually). I have even tried reducing the bit pool, but can't take it below 24 because it sounds to bad then, but it still doesn't work.
Anyone have any ideas or can at least verify you have the same problem?
I have the same issue when trying to play internet radio over wifi with my ht820 a2dp linked to the jasjam (Sleuths v2 rom). The only time i ever got a2dp and wifi streaming to work was with the widcomm bt driver that is now extinct.
Thus i have come to the conclusion that the problem is not with the hw but has more to do with the standard ms bt stack.
If anyone has found a workaround please do share
Thats a start
Thanks, that is helpful.
I remember seeing a widcomm stack thread....
http://wiki.xda-developers.com/index.php?pagename=Hermes_Widcomm_stack
I'm going to check that out, also if there is a specific rom that comes with the widcomm stack I'd be interested to know.
I find that with bluetooth turned on I can associate to my Cisco AP at all. As soon as I turn Bluetooth off it works fine.
I had hoped my issue was due to the way the particular WM6 was put together but now Im using offical Dopod and it is the same.
Widcomm stack
Well I found this
http://www.htc-devs.com/uploads/Univ...m_bt_stack.CAB
at the end of the Widcomm stack for Hermes development thread.
I'm not sure where it came from, but I installed it and so far I can use IE while connected to my home wireless network, and listen to music on my headphones.
The com manager will not show bluetooth as being on, but go to settings-bluetooth and you can re-pair.
Currently I'm getting some hiccups, but its working at least. I'll keep you updated and I would still like to see a rom that incorporates this stack so that the com manager works right.
It also changes the headset icon on the top bar.
Streaming!
I'm streaming SomaFM with no problems!
AVRCP problems
I didn't notice this at first, but after the widcomm stack has been installed the AVRCP functions don't work... so Im going back.
AVRCP
It works in WMP, just not audiomanager anymore.
Bricking Blog
Pretty much what this thread has turned into.
If you install that cab above, don't uninstall it, you'll get bricked.
helpful reading

Connection issues with Bluetooth

I have probably not so unique situation.
My Honda allows for calling via bluetooth but not audio streaming. I use an old Blackberry Gateway for that which works perfectly when I had my Samsung S2.
With the Note, the BB Gateway connects and streams audio fine but the car cannot maintain a constant connection at the same time.
I use A2DP volume (which is pretty awesome for free) to force connection attempts. If the BB gateway is not connected, the car maintains its connection. It seems the Note2 cannot do both.
Does anyone have similar problems or a work around? Or maybe know if the new leaked update fixes this? I heard it does update something about BT...
I'm stock rooted BTW
scoobmd said:
I have probably not so unique situation.
My Honda allows for calling via bluetooth but not audio streaming. I use an old Blackberry Gateway for that which works perfectly when I had my Samsung S2.
With the Note, the BB Gateway connects and streams audio fine but the car cannot maintain a constant connection at the same time.
I use A2DP volume (which is pretty awesome for free) to force connection attempts. If the BB gateway is not connected, the car maintains its connection. It seems the Note2 cannot do both.
Does anyone have similar problems or a work around? Or maybe know if the new leaked update fixes this? I heard it does update something about BT...
I'm stock rooted BTW
Click to expand...
Click to collapse
I'm having the same problem. I have a 2006 Pontiac GTO with a Kenwood touch screen and my Note 2 will connect fine, and it will stay connected with no issues until I switch to another playlist, artist, or song. That's when it seems to just disconnect itself and then, about 30 seconds later, reconnect itself.
I've tested this on stock unrooted (LJ1 and LJC), stock rooted (LJC and LK8), Jellybomb v10.2 and v11 (LJC), and H20 beta's 2.1 and 3.1 (LK8) with no luck. I also just recently started trying to use A2DP volume and it definitely helped with displaying the correct song name, artist and album (it wasn't changing when the song would change prior to using A2DP) so it's definitely an improvement but...
Considering how much I drive and how much I LOVE music this is becoming an area of major concern. If any of the amazing developers, or anybody for that matter, has any words of wisdom, suggestions, fixes, etc. it would be HUGELY appreciated.
That_Guy0505 said:
I'm having the same problem. I have a 2006 Pontiac GTO with a Kenwood touch screen and my Note 2 will connect fine, and it will stay connected with no issues until I switch to another playlist, artist, or song. That's when it seems to just disconnect itself and then, about 30 seconds later, reconnect itself.
I've tested this on stock unrooted (LJ1 and LJC), stock rooted (LJC and LK8), Jellybomb v10.2 and v11 (LJC), and H20 beta's 2.1 and 3.1 (LK8) with no luck. I also just recently started trying to use A2DP volume and it definitely helped with displaying the correct song name, artist and album (it wasn't changing when the song would change prior to using A2DP) so it's definitely an improvement but...
Considering how much I drive and how much I LOVE music this is becoming an area of major concern. If any of the amazing developers, or anybody for that matter, has any words of wisdom, suggestions, fixes, etc. it would be HUGELY appreciated.
Click to expand...
Click to collapse
I'm having similar problems with certain roms. Only my truck is a Chevy not Honda. Using blackberry audio gateway. The "Note Card 2.2" rom works perfect for me, along with JellyBomb. I didn't like JellyBomb. I want to switch to another. I need to spend time and found out what is different between the working and non-working Roms. I had the same problem with my EVO 4g. Some Roms worked perfect, others acted up.

Categories

Resources