Help! Brothers. I get a brick i600!! - Upgrading, Modifying and Unlocking

Help!! Brothers
I have tried to update my i600 to wm6 with a flashing program named "I600_WCEDownloader_v1.1_Single" and 3 update files extracted from the official update patch. I downloaded them from MoXXCo.
For the first attempt, around the end of the process, it took a quite long time without any response. I then unplug the battery for another reset... it held at the screen showing "The Ultra messaging". Then, I tried one more "flash" but the update hung up at the end also.
I have no choice but try to re-flash it with the GD1 and GA2 roms. However, during the updating "Phone" part, the phone screen shows the following messages.
[Phone] Active OFF -> Active OFF
[Phone] Reset Pin -> Low : OFF
*[PHONE] Phone Download Failed!
My phone does not have the phone function right now. I find that the Phone version is only blank in the "Version" page, but the eboot and PDA version is shown there. Is there any solution I can do to fix the problem??
I find one more thing but is not sure if it is related. if I do the reset when I go to "Settings" -> "Security" -> "Reset" , and try to hard reset the machine, it fails. Besides, I find that there are three reset options under the "internal" menu, it failed to reset the machine as well.
However, if I use the most common reset method. I switch off the machine and reset the machine by pressing "4-way navigation key UP + Power" simultaneously. After the phone prompts for reset, press 1 and then Y. The phone reset successfully.
Thank you very much!!!

samsung i600 phone download failed
Hi jackylui,
did you found a solution for "Phone download failed" problem? i tried to uprade mine, but have now same problem as you had.
if anyone else knows the solution, please help.
Thanks,
Tomek

Related

Need desperate help with possibly bricked Diamond

Hi all,
Just received my Vodafone-branded Diamond, and I'm afraid I already managed to brick it!
It was equipped with version "1.37.172.3 NLD" so I decided to upgrade it to the latest version.
The installation of OliNex Hard-SPL 1.93 went flawless, but the installation of ROM "RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe" stopped at about 25% with error code 302. The recovery method that came with the package didn't help, every time the upgrade stopped at the same moment.
Since the device is stuck in the bootloader, and I'm left with a non-chargeable battery, I tried the official Vodafone-branded "RUU_Diamond_Vodafone_NL_1.97.172.4_Radio_Signed_Diamond_52.44.25.24_1.08.25.08_Ship.exe" ROM. Unfortunately, this upgrade stops at 48% and throws the same 302 error.
Anyone who can tell me what I'm doing wrong, and what I can do to solve all this?
I hope I don't have a brand new, but bricked device on Christmas!
TIA and have a nice day.
Try a hard reset first. If this doesn't help google or search at XDA for MTTY.
This tool can fix your device
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader
Try this, maybe will work
Try a Vodafone branded stock rom before mtty.
Regards,
Carty..
He already tried a stock rom....
Potential Solution
Have you looked at the thread titled,
[UPG][TRBL]How-to fix: Update/Flash doesnt work, stops at 0% or 5% (invalid model ID)
It may just be a model ID glitch that can me fixed.
Take a look. It's in this forum in a sticky by cptsunshine.
Thanks all for the help, I'll have a look at your suggestions.
The problem isn't that it stops at 0% or 5%, it stops at random percentages (depending on the ROM I use).
I also see the bootloader (red / green / blue), so it's not dead. I guess it's just that it doesn't pick up a ROM.
Besides, the bootloaders says upgrade ROM code error please try again.
Edit:
A hard reset doesn't seem to work. In the bootloader, when I press "volume down" and "enter" together, and press the "reset button" the screen goes black, but then goes back to the bootloader screen after a sec or 2.
Edit 2:
MTTY doesn't do much either, after executing "boot" the phone is showing me the Vodafone logo and that's it.
For the rest, MTTY shows me the following:
Cmd>boot
InitDisplay: Display_Chip=1
dwDirectNum: 0, dwMatrixNum: 0, dwMicroPNum: 0
Fixed new dwPSImageSize = 0x53E0000
Install Rom via Internal Memory Method
Steps from Suiller:
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Let me know how it goes.
Make sure you have Net framework 3.5 installed on devices.
Nakkie27 said:
Thanks all for the help, I'll have a look at your suggestions.
The problem isn't that it stops at 0% or 5%, it stops at random percentages (depending on the ROM I use).
I also see the bootloader (red / green / blue), so it's not dead. I guess it's just that it doesn't pick up a ROM.
Edit:
A hard reset doesn't seem to work. In the bootloader, when I press "volume down" and "enter" together, and press the "reset button" the screen goes black, but then goes back to the bootloader screen after a sec or 2.
Edit 2:
MTTY doesn't do much either, after executing "boot" the phone is showing me the Vodafone logo and that's it.
For the rest, MTTY shows me the following:
Cmd>boot
InitDisplay: Display_Chip=1
dwDirectNum: 0, dwMatrixNum: 0, dwMicroPNum: 0
Fixed new dwPSImageSize = 0x53E0000
Click to expand...
Click to collapse
u can do one thing then press woluem down and reset bottom at the same time then u go to rescue mode then u wait and put in the usb stick and there stand seriel when u put in the cable it will change to usb thenu can load the firmware again
band27 said:
Steps from Suiller:
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!
Click to expand...
Click to collapse
I wish I could mate, but I cannot put files on it anymore, since ActiveSync doesn't recognize my device when it's in the bootloader.
janielsen said:
u can do one thing then press woluem down and reset bottom at the same time then u go to rescue mode then u wait and put in the usb stick and there stand seriel when u put in the cable it will change to usb thenu can load the firmware again
Click to expand...
Click to collapse
Can you please be more specific? Are you telling me how to do a hard reset? I tried as to do a hard reset, but it goes back to the bootloader instead of resetting. USB stick?
Thanks all, much appreciated. A pain this can happen, looking at the fact that I did everything exactly as described in all these flashing manuals.
Nakkie27 said:
I wish I could mate, but I cannot put files on it anymore, since ActiveSync doesn't recognize my device when it's in the bootloader.
Can you please be more specific? Are you telling me how to do a hard reset? I tried as to do a hard reset, but it goes back to the bootloader instead of resetting. USB stick?
Thanks all, much appreciated. A pain this can happen, looking at the fact that I did everything exactly as described in all these flashing manuals.
Click to expand...
Click to collapse
first push the volum down buttom at the same time press the reset buttom then the 3 color display will appear and in the buttom will stand seriel then u putt in the usb cable to ur phone whit u have attact to ur pc then it will say usb now u can load new firmware
janielsen said:
first push the volum down buttom at the same time press the reset buttom then the 3 color display will appear and in the buttom will stand seriel then u putt in the usb cable to ur phone whit u have attact to ur pc then it will say usb now u can load new firmware
Click to expand...
Click to collapse
No mate, I never had problems getting into the 3 color screen. The problem was updating afterwards, which never completed without error code 302.
Anyway, I guess I just fully bricked my device after putting SPL-1.40.OliNex (according to the guide at http://forum.xda-developers.com/showthread.php?t=416211) on it. The SPL install was succesful, but when booting I'm now not even getting to see the 3 color bootloader. All I see is the Vodafone logo with some version numbers at the bottom, but that's it. It doesn't boot further on, and I can't get a USB-connection.
Edit:
Volume down + reset brought me in the bootloader again, although it's saying SPL-1.93.OliNex.
Nakkie27 said:
No mate, I never had problems getting into the 3 color screen. The problem was updating afterwards, which never completed without error code 302.
Anyway, I guess I just fully bricked my device after putting SPL-1.40.OliNex (according to the guide at http://forum.xda-developers.com/showthread.php?t=416211) on it. The SPL install was succesful, but when booting I'm now not even getting to see the 3 color bootloader. All I see is the Vodafone logo with some version numbers at the bottom, but that's it. It doesn't boot further on.
Click to expand...
Click to collapse
that i know but as i say in the post that when u do it that way i say u can load new firmware whitout it needs to boot try my friend i have done it 3 times because wrong loading of firmware
u have to only push thoose 2 buttom then it will work because u go to rescue mode
But what will that give me extra? I can access the Hard-SPL 1.93 bootloader (3 color screen), and I can get into USB mode. It's just that the upgrade of both firmwares stop at a certain percentage.
I'm constantly trying to hard reset the device, but after pushing the reset button (with both volumn down + enter pressed down), the device just reboots back into the bootloader and doesn't give me the hard reset warning.
Nakkie27 said:
But what will that give me extra? I can access the Hard-SPL 1.93 bootloader (3 color screen), and I can get into USB mode. It's just that the upgrade of both firmwares stop at a certain percentage.
I'm constantly trying to hard reset the device, but after pushing the reset button (with both volumn down + enter pressed down), the device just reboots back into the bootloader and doesn't give me the hard reset warning.
Click to expand...
Click to collapse
u need to hold them down until it leave the 3 color display an turns into grey
Ok, finally managed to do a hard reset. Afterwards I tried upgrading to the official Vodafone NL 1.97 ROM once more, but it failed at 48% again.
Any ideas what to do? I know have Diamond with Hard-SPL 1.93 (which says upgrade ROM code error) with no working OS.
Ok all, got it finally working again!
Don't ask me why, but flashing the newest Dutty ROM (and the included radio) did work.
Thanks for all your help, and a wonderful evening!
Hi all,
I have a quit similar problem. I've read a lot, but couldn't find an answer to my problem - may bye someone can help me.
I updated my Dimond (OliNex Hard-SPL 1.93, radio 1.09.25.23 and rom dutty V4). When I start my phone most of the time (95% plus) I end up in the color screen - however some time it's starts perfect (without changing anything).
When I get stock in the color screen, I can start the phone with mtty and the command "boot".
What can I do to make my phone always start in the normal way?
Thanks!
Nakkie27 said:
Ok all, got it finally working again!
Don't ask me why, but flashing the newest Dutty ROM (and the included radio) did work.
Thanks for all your help, and a wonderful evening!
Click to expand...
Click to collapse
i smell a radio issue - last time i was trying to upgrade my radio - ended up with something similar, managed it out like you did - but now you're up - so that's good!!
try some other rom (this time without radio) - i don't think you should have any issues going forward... good luck and have fun!

HTC Diamond ROM Updating problem - ERROR [294]: INVALID VENDOR ID

Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
aE3-ink said:
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Click to expand...
Click to collapse
Thanks for your advices.
When I bought that phone seller didn't mention that this phone belongs to some operator. So is it possible to get information to witch operator it belongs (phone doesn't have any operator brands on his self, and isn't any special application or images in it).
And one more time... is it realy possible that phone belongs to operator... because like I wrote before that i can download and install earlier ROM from official web site, but problem is only with the latest ROM.
Perhaps the download doesn't work as many people had problems installing the latest rom ? It would reboot into the bootscreen & block.
Maybe they have the download until they know why it screws up (but works perfect via an internal flash).
Dunno though, as it's weird you getting the 'operater' message.
Anyway, you can get the latest official rom in here, so you'll be able to flash your device.
Here's the thread : http://forum.xda-developers.com/showthread.php?t=471699
Just flash it from the internal storage. Works fine. Extract the setup with winrar or something, then you will see 2 files - one approx 140Mb, the other one like 2Mb. Rename the big one to Diamimg.nbh and copy it to your internal storage.
* Soft Reset + Hold volume down button + back button <----
* Follow instructions on screen
vladasklp said:
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
Click to expand...
Click to collapse
Read here where it says "stops at 5% or invalid model id:
http://forum.xda-developers.com/showthread.php?t=409425
Next think about HardSPL.
1.93.479.3 if you had this rom in your device, and you tried to download from HTC Support site and get the "This is rom isnt for your device" you get this because there are NO 2.03.479.3 rom the BOLD tells you what region rom u are using. And If you download another rom and try to flash and get "invalid vendor" you MUST hard-spl your device, after that you can flash every rom you can find an example of region rom, I have put this at least 4 times now so people try o understand what i meen when speaking of region roms.
RUU_Diamond_HTC_DAN_2.03.403.2_
RUU_Diamond_HTC_SPA_2.03.412.1_
RUU_Diamond_HTC_FRA_2.03.406.2_
RUU_Diamond_HTC_GER_2.03.407.2_
RUU_Diamond_HTC_WWE-ME_1.93.456.2_
RUU_Diamond_HTC_Europe_2.03.401.2_
Thanks everyone for advices!
First i tried Kevbodian recommended method. Downloaded OliPro's NBH Util and tried rebuild NBH file, but program generates only empty file (0Kb - size), maybe it doesn't work in Windows 7 So I'm fail.
Then tried laser21 method and succeed! I downloaded Unsigned-Hard-SPL-Diamond-OliNex.zip (http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2), installed them, and made everything step by step like he wrote.
Phone works seams fine, but maybe a little bit slower , so I'm tried reinstall ROM one more time, but do that in standard way. Just downloaded _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship (http://forum.xda-developers.com/showthread.php?t=471699) and ran it. Everything was fine (installation pass 100%) but than it shows - ERROR [270] - UPDATE ERROR, phone also restarted and shows information in red/green/blue/white background.
In red space
Code:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
In green space
Code:
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Place try again
So one more time I made like laser21 recommended - and phone works again. But can I do something more that latter update i can do in standard way ?
I'm not sure what you mean by:
But can I do something more that latter update i can do in standard way ?
Click to expand...
Click to collapse
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
I did everything like you (and laser21) wrote. But now i have problem when updating ROM in standart way - downloading official ROM exe file, and ran it (like I wrote before, after 100% proceed it display error that update unsucceed)
So why now I can't update ROM in standard way, maybe is solution to fix that problem ?
Sorry for mistakes in post
Try one more time with out any changes
omaga said:
Try one more time with out any changes
Click to expand...
Click to collapse
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
vladasklp said:
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
Click to expand...
Click to collapse
error 270 has happened before. try searching. I know I am an old hag, but this may be the best help I can give:
in google search for: "error [270] - update error"
include the "" marks.
help me
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
if you have a question
love_mido said:
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
Click to expand...
Click to collapse
please ask it only once....not 3 times in other threads...this is not allowed.
i have deleted them. read the rules before you post again.
thank you
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
This post is exactly what i needed to upgrade using the internal (memory) route.
touch diamond p3700 error
help me!!
My previous users of htc touch diamond p3700 s / n HT827GN42467 through my htc official site upgrade romnya WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, the program does not run again .....
solution please ....
help me please ....
My previous users of htc touch diamond p3700 s / n HT827GN42467 through the official website of my htc rom upgrade its WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, does not show the logo and the windows mobile does not work anymore at all also can not connect to pc ..... how can I fix that right again, the solution please ....

EnergyROM 1.0 Diamond 52109 Phoenix Standard LZX with Activesyn+Camera Problem.

Hi All, I've encountered "Not able to Activesyn" + unable to recognize my Diamond camera after I upgraded my Diamond with "EnergyROM 1.0 Diamond 52109 Phoenix Standard LZX". No matter how much i've tried to reinstall the Microsoft Activesyn 4.5, it doesn't work. That's why i could not downgrade my device back to the previous ROM version. Anyone's suggestion for any other ways to downgrade my Diamond's ROM without relying on Microsoft Activesy/window mobile center?
Please Help
Did you make sure that Start -> Settings -> System -> USB Settings -> Enable faster data syncronization
is unchecked.
you can flash any rom using the internal storage mode.
for more information go to:
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Yes I did, but still not working. Thanks anyway for the suggestion.
Yes I did, but still not working. Thanks anyway for the suggestion.
im sure you've already done this and it may come across as silly to ask but have you tried a hard reset yet??
I've had this happen once before with a ROM i flashed about 8 months ago now. I did a hard reset and then on the bootup, i cancelled the configuration where it installs the custom apps. This worked for me, might be worth trying.
during flashing the ROM, after i pressed the power button the process remained not progressing at about 20%. It has kept me waiting for more than 40 minutes so far. I'm still waiting.
Thanks for the comment
take the battery out and put it back in, then turn it on again and see what happens. you may also want to try getting into bootloader then see if you can get it to show usb when connected to your pc.
Holding down on Volume down/Reset should enter bootloader.
It work now. I put my Diamond to "USB Trigger Mode" then I pressed the active button. After that i run the ROM file from my PC via the USB cable. Finally my diamond was downgraded.
Thanks you all for your kind help

Eten x610

Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
hi there
try thees Steps
1. Run the ROM update program on your PC and go through the installation process until your reach the ‘End User Update‘ window. Leave this running.
2. Go to the Temp file in your Documents. This is usually C:\Documents and Settings\username\Local Settings\Temp but it really depends on how you set up Windows.
3. Look for these 2 files, temp.dat (about 60 MB) and USBDLUpdate_Console.exe (about 4 KB) and copy them to your formatted SD Card using a card reader. You might want to copy these files to another location on your PC before copying it to your card reader if there are problems. Also, rename temp.dat to temp.bin before proceeding to the next step.
4. Put this card into your device and put the device into Bootloader mode. This can be done by pressing (and holding) the power button and voice commander key and then soft resetting. When it restarts, you can remove the stylus but keep your hold on the power and voice commander buttons.
5. The installation will proceed but at a slower rate than if you did it on your PC. This is due to the slower transfer rate between the card and device. It might take about 15-30 minutes so it would be best if your device was connected to the mains charger.
6. Installation is complete when you see this message “USB host is not connected yet“. This is your sign to do a soft reset and setup your device as the ROM installation was successful.
***
you may use this rom
http://rapidshare.com/files/314654442/Eten_X610_WWE.7z
just rename temp.dat to temp.bin put in formatted sd card
and go threw steps 4 to 6
any how you are welcome to
http://www.eten-users.eu/index.php?showforum=52
Hello,
I Tried All Ways & Your Roms On Etenusers
But My Boot Loader Shows a White Screen After Using Magic Numbers Method!
What Can I Do?
My Device Is x610 Samir 020 0702
One An Other That: My Booting With All The Roms That I Tested With Memory Card Method Long Only 4-5 Minutes! Isn't It Wrong?
Aha i got it now
Ok i got it now
I understand your problem
you cant do any thing for your device unless you have another Glofiish device (any model)
because your flasher is corrupted
if you find any working Glofiish device (any model) this is how to do it
1- connect the working device to Active Sync
2- download this tool http://rapidshare.com/files/254487467/UnLock_upgrade.rar
3- put one of my roms in the same folder of the tool.
4- open the upgrade.bat
5- flow the installation steps until the device goes to bootloader
6- now disconnect the working device from usb
7- put your device in boot loader mode connect your device to pc
8- push the update button .
and you are done
any how send me your mobile number as PM and i will call you as long as you are
in ksa
Oh A Big Problem!!!!
I'm In Iran & I Think There Are max 10 Glofiish Device In Iran!!!
Some Time My Boot Loader Work But Only With Sd Card
Isn't Any Other Solution?
I have another problem with x610. After hard reseting the phone after I pressed yes on deleting the files, I got myself callibrating the phone but the callibration stucks forever and it does not passes so the phone wont start...
Is there any solution? Please help as after searching I found nothing as a solution so I am asking here.
can I boot somehow from sd card? I mean formatting the phone?
nephew said:
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
Click to expand...
Click to collapse
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
probir_dev said:
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
Click to expand...
Click to collapse
Hi,
I tried as you said above, when I click YES it showed as bellow
"erase all data and load default ? (Yes)
please wait... "
and nothing had happened and it was showing like that continuously..
What should I do to get back my device?
please help me to sort out this.
thanks in advance..

i780 cannot start after flash

my phone run wm6.1, i downloaded dt39-UltimateROM-v3-MutliLangKB from this forum
- start Mirage_LV_1.8, click PDA button and select dt39-UltimateROM-v3-MutliLangKB
- click detect button. switch off phone to Emergency Mode, and it start flashing...
- after all, the label changed from green to blue,device reset and cannot boot to win, it halt at Samsung boot screen for long time
- i take battery out, and insert back, start again but still this problem
i try to another rom but it still this problem
was I wrong?
after flashing new rom always do hard reset. If any problem - do hard reset...
what if install harmful cab on i780 orange which lack key combinitions for Hard reset
I post here even it is to late because I had a problem of a spanish i780 that did not respond to key combintions of hard reset and boot mode. the only way to HR is by using code *2767*...... I forget it lol. But, when I installed an Arabic MUI cab on it the phone can't start so I have no way to Hard reset now since I can't access to dialer no more. and I can't flash by mirage since I can't use fn+Enter on this wm6 orange tweaked rom phone.
The only Solution for me was to download this rom ziddu.com/download/8450774/i780PDXIB1_Upgrader_VISTA.rar and I used wincotroll program from 4shared and samsung xp driver (using windows 7) then I tweaked the rom installer by draging a loop icone from wincontroll (software tweak tab) to the bottom of rom installer and clicked show then an emergency box appeared ... I checked this box (no need to check charger battery or phone connected boxs) and reset the phone or rebooted it. >>>>>>>>>>>> the phone started flashing and horaaaaay I have wm6.1 now and both key combination are working now.
I was able to flash the phone again and again testing for the best rom now I have 6.5 rom that works very very fine for me
NB: I searched the inside and outside of the Web with no results so I applied this tweak as I do to my omnia i900 when facing (incorrect software essage)
I am sure this can help someone else who still have orange wm6 useless rom on his i780.

Categories

Resources