Related
I have
Dopod 838pro
IPL - 1.04
SPL- 2.10 Olipro
Radio 1.43.00.00
OS - Black Majik
whats the procedure ? as i think there is a exe file in the zip folder which i am currently downloading, if so then how do i extract only nbh. and what about the radio extraction. and flashing.
Pls senior members should post a easy guide, or many will brick their phone.
Reading wiki and researching the forum has confused me as there are lot of tech terms used which is unfamiliar. and different ways i guess. HELP HELP HELP.
For those, who have native ROMs:
01.
Upgrading the ROM Code erases all of personal data and custom-installed applications from the device. Make sure all of your personal information and data are backed up to your PC via ActiveSync or Windows Mobile Device Center. After updating the ROM, copy the data back to your mobile device and reinstall your applications.
02.
Third-party applications may have compatibility issues with Windows Mobile™ 6. Please consult with the software developer(s) before upgrading to Windows Mobile™ 6.
03.
Make sure the remaining battery power is above 50% before performing a ROM upgrade.
04.
Before upgrading the ROM, remove the miniSD (U1000, D810 and 838Pro) or microSD (P800W) memory card from your device.
05.
Do not disconnect the USB cable or start other applications on your PC while the ROM upgrade program is running. Doing so may cause the upgrade program to fail. In the worst situation, your mobile device may fail to boot.
06.
The entire ROM upgrade installation process takes about 15-20 minutes. Please wait patiently.
07.
When the upgrade has completed, the mobile device will reboot and start installation of certain components automatically. This takes about 3-5 minutes.
08.
If you are not familiar with these operations or if you don’t know how to work with your PC, please visit your distributor or contact us for assistance.
09.
Note that once the operating system is upgraded to Windows Mobile™ 6, it cannot be downgraded to Windows Mobile 5. Consider your options carefully before you upgrade.
10.
Users who have a membership with HTC should upgrade via the HTC official website. Upgrades done otherwise, i.e. through non-HTC-authorized channels, are considered illegal. HTC shall not be liable for any damage to the data or the user’s breach of the related laws and regulations.
01.
Windows Mobile™ 6 firmware update installation program
02.
Related application programs
03.
Windows Mobile 6 New Feature Guide.
After Clicking “DOWNLOAD NOW”, please log in “Member's Club” and find out appropriate WM6 program in “Download System Update”
To install the upgrade:
1. Download the zip file to your PC.
2. Unzip the file when downloading is complete.
3. Connect your device with your PC using ActiveSync or Windows Mobile Device Center, and then run the program.
Press RESET to soft-reset your device. One of the following may occur:
01.
The 3-color installation screen appears: Run the installation program again. Installation will then proceed.
02.
The HTC screen appears and the installation program can be accessed: Run the installation program again. Installation will then proceed.
03.
The HTC screen appears but the installation program cannot be accessed: Hold down the POWER and CAMERA buttons, then press RESET. The 3-color installation screen appears, and you may continue with the installation.
04.
If installation still fails, please visit your distributor or contact us for assistance.
*****************************
How do I synchronize my PC and mobile device?
To synchronize your mobile device to a Microsoft Windows XP-based computer, you need to install Microsoft ActiveSync 4.5 (or later). If you already have an earlier version of Microsoft ActiveSync installed, you must update it to synchronize your mobile device and PC.
To synchronize your mobile device to a Microsoft Windows Vista-based computer, you need to install Windows Mobile Device Center.
How do I get Microsoft ActiveSync 4.5 or Windows Mobile Device Center？
If you are upgrading from Windows Mobile® 5.0 to Windows Mobile® 6, you need to download either ActiveSync® 4.5 or Windows Mobile Device Center from the Microsoft Web site:
ActiveSync 4.5
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
Windows Mobile Device Center
http://www.microsoft.com/windowsmobile/devicecenter.mspx
If you purchased your device with Windows Mobile® 6 pre-installed, you can install ActiveSync 4.5 or Windows Mobile Device Center from the Getting Started Disc.
What is Windows Live™ ?
Windows Live™ lets you easily find information on the web through Live.com and offers various Internet services, including Windows Live Mail, Windows Live Messenger, and Windows Live Spaces. Using Windows Live™ on your mobile device, you can send and receive instant messages, read or compose Live (Hotmail®) e-mail, and send photos to your Live Space.
When you set up Windows Live™ for the first time, your Windows Live contact list will be integrated with your Outlook contacts. You can then send and receive Windows Live Mail in Messaging.
How do I access the Windows Live™ service?
To access the Windows Live™ service, open the Windows Live program and sign in.
The first time you use Windows Live™, sign in by using your Windows Live ID, which is your Windows Live Mail or Hotmail address, and password.
What are the new features in Windows Mobile® 6 Messaging?
Windows Mobile® 6 Messaging has HTML e-mail support. In incoming HTML e-mails, formatting such as tables, inline photos, bullets and colored text, are retained without layout shifting or resizing.
What new features does Windows Live™ Messenger have that are not available in the mobile version of MSN Messenger?
When you are signed into Windows Live™ Messenger, photos of your Windows Live contacts are shown. You can also send files to them via Messenger.
What's new about Calendar in Windows Mobile® 6?
The improved Calendar in Windows Mobile® 6 has a calendar strip in Agenda view that shows the time range.
If your mobile device connects to Exchange Server 2007, Calendar also allows you to accept or decline meeting requests from others, and add required and optional attendees when you create meeting requests.
What's new about Contacts in Windows Mobile® 6？
Windows Mobile® 6 has added the call history to the contact card. This allows you to see all calls from and to a contact when you are viewing a contact card.
What is Storage Card Encryption？
Windows Mobile® 6’s storage card encryption feature protects your storage card from being accessed by unauthorized persons by encrypting the data in the storage card. Encrypted files on your storage card can only be read by your mobile device.
Attention：
1. When you synchronize your mobile device with Microsoft Exchange Server and perform a Remote Wipe, data in the storage card will be deleted.
2. If the storage card is or was previously enabled on your Windows Mobile® 6 device, you will no longer be able to access the encrypted files on your storage card after you perform a hard reset, clear storage, or ROM update/upgrade. Before performing a hard reset, clear storage, or ROM update/upgrade, make sure you back up all your files from the storage card to your PC first using ActiveSync or Windows Mobile Device Center. Then copy the files back to your storage card afterwards.
If I delete the sync connection settings between my PC and mobile device, will my PIM data be deleted from my device, too？
For security, all PIM data, such as Contacts, Calendar, E-mail, Tasks, Notes, and Favorites will be removed from your device when you delete the sync connection settings between your PC and device. You should back up your data first before deleting the sync connection settings.
From here:
http://www.asia.htc.com/asia/event/WM6/au/faq.html
What about hardspl and bootloader
i have read in forums that i u need to downgrade from hardspl7, or using this htc rom will not be possible bec it will not detect it
viewedit said:
i have read in forums that i u need to downgrade from hardspl7, or using this htc rom will not be possible bec it will not detect it
Click to expand...
Click to collapse
Only need to downgrade the SPL if you plan on flashing the ROM from HTC as is. http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Or, you can wait until someone extracts the .NBH file which will allow you to flash with the RUU and keep HardSPL7(2.10)..
By waiting, this allows more flexability in managing the Radio and ROM releases your self.
you can try to use dutty's nbh tools to extract the nbh file then upgrade. i tried it works fine by not downgrading the SPL
can u pls explain the step by step procedure
can u pls explain the step by step procedure
use THIS update and then READ how to perform flashes safely.
Apologies but I'm new to this - my HTC TyTn (unlocked) starts to show the progress bars for the firmware update but then stops and tells me I've got an "Invalid Vendor ID".
I was under the impression that this Dopod 838 WM6 official firmware would work on my TyTn? What am I missing please?
Thanks all,
Fedorov.
just checked the htc asia website- official wm6 for hermes is ready for download!!! Everybody scoot there now!!!
http://www.dopodasia.com/download/838Pro_SEA_ENG_WM6_Upgrade_20070712.zip
Fedorov999 said:
Apologies but I'm new to this - my HTC TyTn (unlocked) starts to show the progress bars for the firmware update but then stops and tells me I've got an "Invalid Vendor ID".
I was under the impression that this Dopod 838 WM6 official firmware would work on my TyTn? What am I missing please?
Thanks all,
Fedorov.
Click to expand...
Click to collapse
Upgrade to HardSPL.
then
READ THIS THREAD.
My Method
The steps that I took were:
1. First run the official EXE and monitor your c:\documents and settings\username\local settings\temp folder.
2. Eventually the signed *.nbh file will appear in a sub folder (90+ odd MB).
3. Copy out the *.nbh file to another location.
4. Continue through the EXE eventually it will bomb out and your device will restart.
5. Once booted copy SSPL-HERM (downloadable from wiki) to your device then execute it from the device.
6. Device will reset into bootloader mode.
7. Copy RUUWrapper (downloadable from wiki) into same location as *.NBH file on your PC.
8. Execute RUUWrapper select SSPL as the method and follow on screen prompts.
9. The process does take a while so be patient.
Hope this helps and Good luck.
mrvanx said:
use THIS update and then READ how to perform flashes safely.
Click to expand...
Click to collapse
Hi mrvanx,
First thanks very much for your effort since I have read your guide which is very useful for me.
I am using X01HT with WM6 (Black Pro 3.01 and Radio 1.41 and flashed HardSPL 2.10 Olipro), so if I wanna upgrade to Offical ROM from Dopod / HTC, do I need to use Dutty's tool to extract the nbh file to 7 files? and then repack them (include window, primary splash , secondary splash and ExtROM) ?
Do I also need to include the new "Radio" in the new repackage? (does it rewrite my current radio bootloader)?
Thanks so much!
You could keep the radio if you want to.
But it is still okay to flash back to previous as RADIO version for 1.47 is BL0108.
MacJuJu said:
You could keep the radio if you want to.
But it is still okay to flash back to previous as RADIO version for 1.47 is BL0108.
Click to expand...
Click to collapse
Thanks MacJuJu, Good to see u here.
I have repackage the ENG ROM, no radio is abt 80M and with new radio 1.47 is abt 94M , are those file size a bit too large?
Did I do anything wrong?
mrvanx said:
Upgrade to HardSPL.
then
READ THIS THREAD.
Click to expand...
Click to collapse
Excellent, will try this, thanks for your help.
kinghung said:
Thanks MacJuJu, Good to see u here.
I have repackage the ENG ROM, no radio is abt 80M and with new radio 1.47 is abt 94M , are those file size a bit too large?
Did I do anything wrong?
Click to expand...
Click to collapse
you dont need to repackage it...ive already done it.
See the relevant thread.
Sorry for the questions, there so much to read on here I'm now going round in circles I think!
1) I've NEVER flashed my HTC TyTn before but I presume I still need to install HardSPL as you advise, this is to save bricking I believe.
2) My unlocked TyTn is on the O2 network, I've heard mention of o2.cab files - do I need to do something extra here, apart from HardSpl and flashing the WM6 rom?
Thanks again, just had this awful feeling that it will flash okay and then I'd find that I couldn't get on my O2 network no more....
Fedorov.
mrvanx said:
you dont need to repackage it...ive already done it.
See the relevant thread.
Click to expand...
Click to collapse
Thanks so much for your effort!
myppcsg said:
just checked the htc asia website- official wm6 for hermes is ready for download!!! Everybody scoot there now!!!
http://www.dopodasia.com/download/838Pro_SEA_ENG_WM6_Upgrade_20070712.zip
Click to expand...
Click to collapse
OMG!! REALLY?! Are you serious?! IT IS!? .. yeah... we kind of know that already.
mrvanx said:
you dont need to repackage it...ive already done it.
See the relevant thread.
Click to expand...
Click to collapse
Why did I just feel in my bones that when any "official" ROM was released there would be a plethora of "how do I" questions?
Just why did I feel that coming.
I guess though, I'm glad that I've spent months reading, and flashing is a 10 minute no sweat deal anymore, thanks to the efforts of mrvanx, pof, des, and many others.
Config after flashing is another deal altogether.
im current problem is that when i open windows mobile device center it crashes and i can see my tytn , im currently not aving any outlook is that that the reason of the crash ??
i don't think lack of outlook is a problem, unless perhaps you have set wmdc to sync with outlook (reinstallation or adjustment of connection/sync settings will solve this)
make sure you have:
-unchecked advanced network functionality on your tytn (under settings/connections/usb to pc)
-make sure you have the latest version of wmdc
also try reinstallation of wmdc, soft-reset, pc restart
you should also read mrvanx's guide its really useful
here's a link to mrvanx's upgrade forums, you should choose 'configuring windows VISTA'
http://forum.xda-developers.com/showthread.php?t=299462
i had wmdc crashing on me whenever i connected my 8525 as well. windows data execution prevention was shutting it down.
i had to go into the windows registry & delete the existing partnership information before i could get it to work again.
I do helpdesk support and I am on call frequently. We use PCanywhere to connect to our clients servers.
When I had WM5 I could just click modem link and choose activate, open PCanywhere, right click my remote & go to properties, select HTC USB modem.
PCanywhere would then use my phone as a USB modem and connect to the remote site. Now I am using Faria's 6.1 (which has the WM5 modem link & internet sharing) and I can not use my hermes as a modem no matter what I do.
All of the directions I have found are how to tether/internet via modem link. I want to use it as an external modem. Please Please help if you have been through anything like this.
oh yeah, FYI I am able to tether via internet sharing just not use the hermes as an external modem.
Hi,
are you looking for the Modem Link/Internet Sharing?
If yes, use the attached cab files.
wfg
starbase64
Thanks for the reply. I already have Modem link and internet sharing built into the faria clean 6.1 ROM. My issue is that it no longer works like it did in WM5.
I am trying to use my hermes as a modem for my laptop to connect to a remote modem via PCanywhere.
Maybe its the ROM! Did you try this with any other ROM's?
I have not tried it with another 6.1 rom but it worked with the factory wm5 rom. I love this ROM and I am trying to hold off on trying another one until Schapps comes out with his new one.
Oh well for now I am pulling a rube goldberg. I am tethering using internet sharing and then aventail vpn into my network, then vnc into a desktop here, then using PC anywhere to connect to my remote server.
How did you get pcanywhere to install on WM6.1? I have dcd's rom and pcanywhere v3.0 will not install, only v2.0 will.
Can you offer any help?
I gave up. I now just use Logmein and use my desktop to connect to the pcanywhere host.
Though the topic is almost two years old, it still serve my purpose today! Thanks a million for the cab files (HTC modem Link and internet sharing)
configuring both the laptop and the cellphone for the Internet connection, and finally, initializing the connection. Once you’ve completed steps 1 and 2, you’ll never have to do them again. The next time you want to access the Internet with your cellphone you simply “redial,” and you’re online. This particular setup is based on the HTC manufactured series of windows mobile devices. In my case I still use the now-ancient HTC Cingular 8125, however these steps work for the later models (and most Windows Mobile devices will also be similar).
Step 1: Getting Things Ready
The first thing that you need to do before you can establish a laptop/modem connection is to kill the current application that’s handling communications between your laptop and cellphone. In my case, I’m running ActiveSync, so I kill that process using the Task Manager.
laptop wireless internet access
For ActiveSync, you just find wcescomm.exe and kill the process. If you’re particular Windows Mobile device uses another application, you’ll need to find the process name and make sure that you kill it. Secondly, you’ll need to also shut down the communications software on your phone. In the case of ActiveSync, in Windows Mobile you go to Start -> Settings -> System -> Memory -> Running Programs, and then if ActiveSync is listed you’ll need to stop the process.
mobile internet
Once you’ve stopped the communications software on both the laptop and Windows Mobile phone, you’re ready to establish the connection between the laptop and phone as an Internet modem.
Step 2: Connecting The Cellphone As a Modem
The only real configuration required in Windows Mobile in order to set up your device as an Internet modem is to enable the “Modem Link.” The Modem Link configuration can be found by going to Start -> Programs.
mobile internet
Once you’re inside the Modem Link configuration, just change the Connection setting to USB. It’s likely that your other settings are already configured, however if they are not just make sure that the Access point name has the name of the connection you configured on your mobile device for Internet access. When everything looks good, click “Activate” at the bottom, and the “Status” at the top should change to “Active.”
mobile internet
If your device is already connected to your laptop, you’ll get the “Found New Hardware” wizard pop-up immediately. If you’re not yet plugged in, then now’s the time to do it.
wireless internet for laptop
Just make sure that you select to install from a specific location so that you’ll have the option to manually select your driver file. Click next.
wireless internet access
On the next screen, you’ll click the browse button and go to the folder where the driver file is located. In my particular case with the Cingular 8125, and for most HTC mobile devices, you’ll need the USBMDM.INF driver file as well as the HTC USB Modem Dialer application. Both are offered as a free download from xda-developers.com. Download the zip file and put them wherever you’ll remember. Then in the Windows Wizard screen above, browse to the directory where you extracted the INF file. If your Windows Mobile device is non-HTC, check with the manufacturer for a USB modem driver for your device.
laptop wireless internet connections
The Wizard will recognize the device. Depending on your particular device and the version of the driver, you may see the error message above. Just click “Continue Anyway.”
wireless internet connection
Finally, the driver’s installed and you’re ready to start using your new Mobile USB Modem anytime you want to, and anywhere you have a cellular signal!
Step 3: Initializing the Internet Connection
To establish your new mobile Internet connection using your laptop, run the executable that you downloaded from the link above. Regardless of your device or your cellular carrier, you’ll typically always need to enter a User Name and Password. You can access that information (if you don’t already know it from setting up Internet use on your mobile device) by contacting your cellular provider and asking for the User Name and Password to use with your Internet data plan.
wireless internet access
Enter those details into the USB modem dialer, and after a few moments it’ll inform you that you’re now connected. Yes, that means that at this moment, even while you’re sitting in the middle of the lake with a fishing pole in one hand, your laptop is now connected to the Internet via your cellphone signal. It may not be lightning fast – but when you’re desperate to submit your latest article (or check on your team’s latest game results), sometimes such a connection is all you need.
http://www.makeuseof.com/tag/how-to...ternet-access-through-your-cellphone-windows/
Modem Link: http://attachments.xda-developers.com/attachment.php?attachmentid=90454&d=1212623870
Usb Modem: http://forum.xda-developers.com/attachment.php?attachmentid=27020&d=1142937864
Internet sharing: http://attachments.xda-developers.com/attachment.php?attachmentid=90453&d=1212623870
When I try to install Windows Sideshow I get the following errors:
1. A problem has occurred with tmarshaller.exe
2. A problem has occurred with shell32.exe
When I click these errors away the installation is finished, but then my device doesn't respond to anything.
After a soft reset I can start Sideshow, but even when the device has a bluetooth connection with my computer it gives the following message:
"Make sure that this device is paired with the PC over Bluetooth and that the PC is turned onn and within range.
If this problem persists, wait a few minutes and try again."
When I remove the application and reinstall it again I get the same problems.
Anyone know what I can do to make it work?
Using Windows Sideshow on Xperia X1
Hi, I can't help with the error codes but I have successfully loaded Windows Sideshow onto my Xperia X1 and can see information from my Desktop PC.
Background info:
PC Operating System: Windows 7 Ultimate x64
Xperia Operating System: Energy ROM based on WM 6.5.3
The steps I took were to install my USB Bluetooth adapter but install using the Standard Bluetooth stack drivers that are built into Windows 7, create a Pairing between my X1 and PC so i never need to input a code when transferring data.
I then installed the Windowssideshowforwindowsmobile.cab and .NetCF V2.cab to my X1 (Install to Device and not storage card)
then go to control panel on your PC and under Devices you should see your Phone/PDA listed - access the settings option by right clicking and go to the 'Services' tab, select all Bluetooth services by putting a Tick into the box.
I had options for Activsync over bluetooth and windows sideshow.
then on your Phone/PDA start the Sideshow app and select connect.
to add new apps/gadgets to your device go to Control panel/windows sideshow.
Hope this Helps.
Download details: http://www.microsoft.com/downloads/...84-f862-4e02-a2b0-0003b4565f34&DisplayLang=en
Some gadgets require the Managed Runtime 1.0 to be installed to your Phone/PDA http://www.microsoft.com/downloads/...FamilyID=ca8e9272-68e8-4c0c-a239-560c21b66fca
and remember Windows Sideshow is only available on Windows Vista / Windows 7
Best regards,
Leba837
hi, im having the same problem here: any solutions? pls pls pls!! :-(
i'm using using Wildchild's ROM on X1 on a Windows 7 ultimate PC...pls help!
This is Rhodium section
@OP, try doing hard reset
Another note
Another note to take into account is that Windows Sideshow will not work if your PC / Laptop etc is using Toshiba Bluetooth drivers.
Schaps has released the private beta TouchExperience and Windows Phone Device Manager....Maybe other developers can work with this program and make things happen even more than what we already have to work with.
Download
http://forum.touchxperience.com/viewtopic.php?f=30&t=783
Windows Phone Device Manager features:
Applications management: view, install/uninstall homebrew applications
File management: explore device, exchange files with your phone
Files & folders synchronization
Integration with Windows explorer
Send to Windows Phone (to send files, apps, ringtones, web links in one click)
Device backup (if MS allow it)
Device information
Add and manage custom ringtones
Send SMS, E-mail, notes directly from PC (without needing cloud services)
Shared clipboard with PC and phone
Programming sends notifications to phone
Initiate connection from PC or phone
Wireless connection support
Auto pairing (no need to enter PC or phone IP address)
Requirements:
Registred/unlocked Windows Phone 7 device
Windows Vista or Windows 7 32/64-bit
Windows Phone Developer Tools
.NET Framework 4.0
Julien Schapman's Apps for Windows Phone 7
TouchXplorer
Advanced Configuration Tool
Quick Settings
Registry Editor
Xbox Live Gamer Profile
You can initiate connection from both PC and device (tap PC Synchronization in TouchXperience to etablish connection from device). You can connect via USB or Wi-Fi, but the first time you have to connect via USB so WP Device Manager can deploy TouchXperience and your device can get your PC IP address.
In the current version you can't manually set the PC or phone IP address to connect, or change default ports.
Make sure port 8007 is not blocked by firewall on PC and port 8107 is reachable on device.
When WP Device Manager initiate a connection, if it can't connect to the phone, in case you are connected via USB it will launch TouchXperience, in other cases it will send a push notification to your phone asking you to manually launch TouchXperience
Some tasks requires that your phone screen is unlocked
It is not necessary to have Zune runing in order to use WP Device Manager.
If you have connection problems, try the following may help: unplug/replug your phone, close or start Zune, restart WP Device Manager, make sure your device is detected by Zune.
In order to use WP Device Manager from Windows Device Stage, you must have Windows 7 and driver signature verification disabled, unfortunately this is because Windows 7 recognize only digitally signed drivers.
Here is a registry fix for ppl having connection problems:
This thing doesn't work on all WP7 devices and is a pure HTC only app for the most part (good editable part)..On my DVP, the moment i connect the device, it crashes.
Neverthless, the developer has to get credit for the work he has done and support him.
Not sure what errors you may be getting when it crashes? It currently supports the following devices:
HTC HD7, HTC 7 Mozart, HTC 7 Trophy, HTC 7 Surround, HTC 7 Pro, HTC Arrive, HTC HD2, Samsung Focus, Samsung Omnia 7, Dell Venue Pro, LG Optimus 7, LG E900, LG C900.
I had connection problems when he first released to beta testers but that was at first...but all was worked out in the 2nd version..
lucasryan said:
Not sure what errors you may be getting when it crashes? It currently supports the following devices:
HTC HD7, HTC 7 Mozart, HTC 7 Trophy, HTC 7 Surround, HTC 7 Pro, HTC Arrive, HTC HD2, Samsung Focus, Samsung Omnia 7, Dell Venue Pro, LG Optimus 7, LG E900, LG C900.
I had connection problems when he first released to beta testers but that was at first...but all was worked out in the 2nd version..
Click to expand...
Click to collapse
wow, nice. works here on LG Quantum (C900). thanks for the post.
edit: Capture only works within TouchExperience, not when I go out of it to the phone's native menu. in fact, it disconnects the phone when I do that (by design?).
when i install it says i need version 1.3.2 to connect. then one to download is 1.3.0
derausgewanderte said:
wow, nice. works here on LG Quantum (C900). thanks for the post.
Click to expand...
Click to collapse
my LG Quantum C900 has some messages that come up like:
unable to launch TouchXperience
and when i launch it manualy i get:
TouchXperience version 1.2.3.0 or later is required
tried all the restart/reset stuff, nothing is working. did you have to do anything with yours?
edit: Capture only works within TouchExperience, not when I go out of it to the phone's native menu. in fact, it disconnects the phone when I do that (by design?).[/QUOTE]
Go into settings and enable multitasking, then you should be able to capture
gregrey said:
when i install it says i need version 1.3.2 to connect. then one to download is 1.3.0
Click to expand...
Click to collapse
If you are not able to connect or if some features are not properly working, go to Settings in WP Device Manager, click Restore default settings and restart your PC...Also try delete touchexperience from phone then reconnect to pc and let it download and install it again to device to try get error about 1.3.2 as the current version is 1.3.0 for public release and beta testers is 1.3.2 i do believe ...sometimes it trys to look for updates and gives error, but all should be fine within the program after that error.
lucasryan said:
Go into settings and enable multitasking, then you should be able to capture
Click to expand...
Click to collapse
that is not available, attached is what I have under settings.
derausgewanderte said:
that is not available, attached is what I have under settings.
Click to expand...
Click to collapse
It's not there, go to the main menu (the one with PC Connection, Airplane mode, etc) tap the menu title and a menu will appear, tap settings and enable multitasking from inside there.
notebookgrail said:
On my DVP, the moment i connect the device, it crashes..
Click to expand...
Click to collapse
I was having this same problem and here is a great tip that might save some of you headaches.
1: If you are on windows x64 go grab a program called EasyBCD Install it and in the advance settings go to advanced and tick the box that says "Allow installation of unsigned drivers in x64"
2: Remember to install the windows phone developer tools if you haven't already.
3: Turn Zune on before loading the program and Run The Device Manager as Administrator.
Program does not crash and works great with my HTC
bubbl3 said:
It's not there, go to the main menu (the one with PC Connection, Airplane mode, etc) tap the menu title and a menu will appear, tap settings and enable multitasking from inside there.
Click to expand...
Click to collapse
ah, talk to a beginner. thanks for this. wasn't obvious to me to tap that (although I am used to on my Zune ).
It must have taken the phone a while to adopt the settings. After a minute or so it was working. Thanks again!
how is the multitasking support? Does it work pretty well?
Nice ale broken -
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Also not able to launch TouchXperience, nor connect to my Quantum, even after a restart.
Works perfect on my E900
Wowwww...nice ... ihave to try it
Wonderfull
malovani said:
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Click to expand...
Click to collapse
same here on hd7
malovani said:
Hi all,
I have a problem with the Samsung Omnia 7th
Repeatedly that you want me to version 1.3.2.0. File Explorer does not work, I do not load or information about the device tested on multiple devices ...
I hope to fix it
Click to expand...
Click to collapse
Make sure port 8007 is not blocked by firewall on PC and port 8107 is reachable on device.
When WP Device Manager initiate a connection and can't connect to the phone, in case you are connected via USB it will launch TouchXperience, in other cases it will send a push notification to your phone asking you to manually launch TouchXperience
Some tasks requires your phone screen to be unlocked
It is not necessary to have Zune runing in order to use WP Device Manager.
If you are not able to connect or if some features are not properly working, go to Settings in WP Device Manager, click Restore default settings and eventually restart your PC.
If you get a message "TouchXperience version 1.2.3.0 or later is required" it means Device Manager is not able to communicate with TouchXperience, to solve the problem, go to Settings in WP Device Manager, click Restore default settings and restart your PC.