Hey guys,
I got an analogue dual sim adapter. When I start the phone with the first sim card it's ok. But as soon as I wanna switch to SIM2, it tells me, the sim card was missing. When I do a reboot instead of turning off and on the telephone module, it works. The strange is, when I do a switch from SIM2 to SIM1, there is no problem at all. Neither by restart nor by turning telefunction off and on.
I already tried to switch the sim cards manually in the adapter. No change. Always the problem by switching from SIM1 to 2.
Does anybody have a solution?
Btw. I run WM6 Touch VII. But it's the same problem with WM5.
Dual Sim
I assume that your sim is Analog? I'm not sure exactly how those work, but I had a similar problem with my Digital dual sim. It would always give a sim blocked message while trying to switch in the one direction. In the other direction it was fine. It turned out that my provider required the exact Telephone number to be the name of the Sim. When I changed the name, everything worked fine. Since it sounds like you have an analog model, I'm not sure if you can change the name, but if you can, it's worth a try.
P.S. The Digital Dual Sim really burn a lot of Battery, so I can't really recommend it.
yes. as i wrote it is analog. i can't change the names of the sim card.
Analog Sim Adapter
Which Radio Rom are you using? I would recommend 2.69.21. Since it works on a softreset and not with the Phone on off switch in ConnectionsManager, I would guess that you Radio Rom is not compatible with your SIM. Try flashing a new Radio ROM to see if that helps, if not, you can always another. If none of the radio roms work... well, try bringing back the SIM and getting a new one or something.
i updated to the newest radio rom version. And nothing changed. still "sim card missing". I suppose there's something wrong with my simcard.
Probably, but I did think of one other thing. It's kinda dumb, but maybe worth checking out: Is possibly one SIM slightly thicker than the other? If so that might be the problem. You could then try wedging paper in between to give it better contact. Otherwise, good luck with bringing it back, or exchanging it.
P.S. Have you tried it in a different Cell phone?
yes, i tried in a different one. there it works... strange.
thanks for your help anyways.
Have you tried all the radio roms? In your situation, I would flash every radio rom on the ftp just to try it out. Maybe the oldest one will help, maybe 2.47.21? Who knows? But if the card works in a different phone, then I can't see why it wouldn't work in the Prophet??? I have a Digital Dual Sim, and that works fine, but drains the battery
Stuclint said:
I assume that your sim is Analog? I'm not sure exactly how those work, but I had a similar problem with my Digital dual sim. It would always give a sim blocked message while trying to switch in the one direction. In the other direction it was fine. It turned out that my provider required the exact Telephone number to be the name of the Sim. When I changed the name, everything worked fine. Since it sounds like you have an analog model, I'm not sure if you can change the name, but if you can, it's worth a try.
P.S. The Digital Dual Sim really burn a lot of Battery, so I can't really recommend it.
Click to expand...
Click to collapse
Hmm, interesting, I have a simmilar problem on my wizard. But it happens only with one particular pair of cards, other works flawleslly.
On my device it doesnt show the message, it even looks like it logs to the network correctly, but its imposible to make call, access Sim card or any phone options. It looks like the phone module hanged, and only solution is a soft-reset.
I didnt even thinked that the SIM card names have anything todo with that. Can you tell me in what format you put the number? I mean, did you put the country code in front of it (like eg. 44 or +44).
I have already tried to put the number, but still no success.
Also I have looked through many ROM's (more than 10) and tried almost all available radio's and always the same, no success.
PS About battery drain, i own a 15gen. dual sim card and it have exactly same power consumption as used without it. So seek for a new DualSim, they dont have increased drain.
hi guys
i'm loking for a dual sim that works with the usim "3" ,i have just try to find some thing in ebay ,but nothing ,can any one help me please?
www.multimobile.nl
regards,..
A.
adonker said:
www.multimobile.nl
regards,..
A.
Click to expand...
Click to collapse
thank for your replay but your link is maby wrong (404 no found)
oh,...excuse me:
http://www.multi-mobile.eu/
this one should work...
a have just sent a mail asking them if that works fine for jasjar ,but any replay untile now
Got any reply?
re:
babak said:
a have just sent a mail asking them if that works fine for jasjar ,but any replay untile now
Click to expand...
Click to collapse
As per my knowledge, ther is two types of "multi sim"
1- the one that holds both of your sims into some smal circut, and there is a third sim connected to the circut, which you insert into the back of your phone, and keep the rest of the circut into the cover back.
2- there is another type, that you cut a small peice of your two sims , and re-attach it to a new SIM, and insert it into the sim hole into the phone.
the difference is if have a place in the back of your phone for the first type, use it, cause it keeps your sims in a good condition and can be used in any other phone, if you don't have a space for the circut, so you have to use the second type, but you can't use any of the sims separte, because you have already cut it.
now, the important part of that all, that you can't use both SIMs at the same time, none of the above solutions can make you online on both SIMs, because your phone of course dosn't support it, the phone is disigned to deal with one network only at the time, the above solutions only makes you to switch your phone off, then re-switch it on, to find your self on the other SIM, and you can do re-switching your phone to back to the first SIM.
hope that I was clear, and hope there is a program some day that can deal with both SIMs at the same time
mehegazy said:
As per my knowledge, ther is two types of "multi sim"
1- the one that holds both of your sims into some smal circut, and there is a third sim connected to the circut, which you insert into the back of your phone, and keep the rest of the circut into the cover back.
2- there is another type, that you cut a small peice of your two sims , and re-attach it to a new SIM, and insert it into the sim hole into the phone.
the difference is if have a place in the back of your phone for the first type, use it, cause it keeps your sims in a good condition and can be used in any other phone, if you don't have a space for the circut, so you have to use the second type, but you can't use any of the sims separte, because you have already cut it.
now, the important part of that all, that you can't use both SIMs at the same time, none of the above solutions can make you online on both SIMs, because your phone of course dosn't support it, the phone is disigned to deal with one network only at the time, the above solutions only makes you to switch your phone off, then re-switch it on, to find your self on the other SIM, and you can do re-switching your phone to back to the first SIM.
hope that I was clear, and hope there is a program some day that can deal with both SIMs at the same time
Click to expand...
Click to collapse
thank for your generous replay ,but not all of the second tipe are compatible with our device and just for this reason, i send mail to them but i don't think that their dual sim works for jasjar ,this is the reason because they dosen't replay me nothing .
Did you find a solution to your problem? i have the same problem & can't find any solution
carger1115 said:
Did you find a solution to your problem? i have the same problem & can't find any solution
Click to expand...
Click to collapse
no,unfortunately and it seems so strang than nobody is interested in it
I did sent an email and I did get a reply (in dutch )
Apparently the dual sim sollution should be usable in our universal, u cut your sim card to pieces (cut the chip out) and put it in a specialy made simcard, that fits exactly in the universal like a normal simcard would.
In a special sim menu u can choose which one of the sim cards is used, BUT they cant be used at the same time if u wanted that u have to buy a dual dim phone, which probably has two radio circuits....
Bonusbartus said:
I did sent an email and I did get a reply (in dutch )
Apparently the dual sim sollution should be usable in our universal, u cut your sim card to pieces (cut the chip out) and put it in a specialy made simcard, that fits exactly in the universal like a normal simcard would.
In a special sim menu u can choose which one of the sim cards is used, BUT they cant be used at the same time if u wanted that u have to buy a dual dim phone, which probably has two radio circuits....
Click to expand...
Click to collapse
thank for your replay, but unfortunatly if it has a menu ,it's certainly not compatible for jasjar ,just tested this kind of dualsim.
Hi,
there is a third type of multi sim, it is the SuperSIM 16 in 1.
Phisically it is just like a normal SIM, but it can contain up to 16 virtual SIMs.
see: http://www.duosim.com
You need a special SIM and a hardware reader/writer (to be connected to a usb port), then you read your original SIMs and copy them to the SuperSIM with the progam delivered in the kit.
I bought one, I can read my SIMs, but when I try to write to the SuperSIM I receive an error (write failed!)
I wrote many times to the seller via web, e-mail and normal mail, but I had no reply, so I wasted my money and I still need a dual SIM.
I don't like to cut my SIMs, I previously bought a "type 1" (as described by mehegazy) but I cannot close the SIM holder on my Qtek9000.
Bye.
Ermanno
ik1aor said:
Hi,
there is a third type of multi sim, it is the SuperSIM 16 in 1.
Phisically it is just like a normal SIM, but it can contain up to 16 virtual SIMs.
see: http://www.duosim.com
You need a special SIM and a hardware reader/writer (to be connected to a usb port), then you read your original SIMs and copy them to the SuperSIM with the progam delivered in the kit.
I bought one, I can read my SIMs, but when I try to write to the SuperSIM I receive an error (write failed!)
I wrote many times to the seller via web, e-mail and normal mail, but I had no reply, so I wasted my money and I still need a dual SIM.
I don't like to cut my SIMs, I previously bought a "type 1" (as described by mehegazy) but I cannot close the SIM holder on my Qtek9000.
Bye.
Ermanno
Click to expand...
Click to collapse
Hi,
I had exactly the same problem like you, and I started searching about.
I figured out with a lot of testing, that using the program "SuperSIM LY-600" from the link "http://www.duosim.com/download.html", totaly solved my problem, so now I have the supersim 16in1 loaded in my qtek9000 using up to 5 different numbers.
I hope that helps you.
Beware using the 16 in one sim cloning system.
Cloning your sim is in contradiction of you terms with the service provider, and can be illegal in some countries. IN brief: If yer caught yer busted!
Oh dont bother if you have a Vodafone UK sim as they use a Triple DES encryption on the card that simply will take you a year to break before you can brute force the IMSI and KA. Oh and yes I have played with this in the past.
Psi
jolas said:
Hi,
I had exactly the same problem like you, and I started searching about.
I figured out with a lot of testing, that using the program "SuperSIM LY-600" from the link "http://www.duosim.com/download.html", totaly solved my problem, so now I have the supersim 16in1 loaded in my qtek9000 using up to 5 different numbers.
I hope that helps you.
Click to expand...
Click to collapse
Hi Jolas,
I used LY-600 as you suggested and now I can write to the supersim - GREAT!
Thank you very much.
But how can I switch between my two numbers on my Qtek900?
Is there a new menu? Where?
Switching the phone on and off doesn't switch the numbers.
Thank you again.
Ermanno
ik1aor said:
Hi Jolas,
I used LY-600 as you suggested and now I can write to the supersim - GREAT!
Thank you very much.
But how can I switch between my two numbers on my Qtek900?
Is there a new menu? Where?
Switching the phone on and off doesn't switch the numbers.
Thank you again.
Ermanno
Click to expand...
Click to collapse
I'm happy this hepled you.
In the programs menu, you will find a shortcut names "STK". Just use it and you will find the menu 'switch number'.
In case you don't have the STK service, then probably you'll need a new ROM which is suppotring this service.
jolas said:
I'm happy this hepled you.
In the programs menu, you will find a shortcut names "STK". Just use it and you will find the menu 'switch number'.
In case you don't have the STK service, then probably you'll need a new ROM which is suppotring this service.
Click to expand...
Click to collapse
Hi Jolas,
you are very kind.
I cannot find an icon STK under Programs folder, maybe my ROM does not support this service, as you said.
I tested the supersim on other cellphone and it works, so the SIM seems to be OK.
I'll will further investigate.
Anyway thanks a lot !
Best wishes.
Ermanno
Does the original sim card still works after the cloning?
weenween said:
Does the original sim card still works after the cloning?
Click to expand...
Click to collapse
Yes, it does, but be aware you can't use the same time the same number through two different sims because your phone provider is going to lock your sim .
My friend bought me a tmobile dash from america.I hevw to run the phone on a greek network but it doesnt working.It says the sim is valid?What do i have to do to make it work?
get it sim unlocked for one.
Read this thread
Is this the only way?I mean i have a qtek8310 and i sim unlocked it with the SPV-Services.Can i do the same with the Dash?I dont have a windows xp system at the time and the progrmam doesnt run..Thats why im asking!
Did anyone tested it?
Anyway if this is the only way unlocking the phone whats the price jockyw2001 asking?
If your phone had it working with an American provider, he can call the provider for the unlock code.
If it was straight from a store........find a computer with XP and go thru Jocky.
Not sure how much he asks for.
Can't you ask any off them Ellines to unlock it for you out there?
He changed the provider he doesnt have anymore T-mobile so we cant ask for a code anymore...
Before i ment that SPV-services doesnt run on vista.You must run it on XP system to test it if it can unlock the phone the same way as qtek8310 did.
Oi "Ellines" want a lot of money to do it!Some big mobile phone stores in Greece think that we are stupid...
They want something like 60euros witch is about 80dollars sometimes to make just a sim unlock and i dont trust them!I prefer to do it my way!
Lot of money dont you thing..?
hi giuys like the header says i would like to sim lock my phone... what i mean is that i want my phone to work only with my sim... i've tried to search on the forum for it but with no results... can you help me???
thanks in advance
hi. first of all, if your phone is sim locked, it not gonna work only with your sim but with every sim card of your network ( vodafone in your case); secondly i've never heard about something or somehow to sim-lock again a phone!!! ask Olinex, may be he knows!!! good luck
i didn't mean the general sim-lock like the branded phones have i mean maybe a lite app that runs when you start the phone and blocks you from using the phone if there is no sim or it isn'tt the sim you've previously registered...
aahhh okayyyy, you mean something like the nokia's phone locking if the sim is changed! i've understood now! i was looking for it me too but i've never found a bit! we'll stay in touch, if i find something intresting i'll tell you ciao
crashnarcis said:
i didn't mean the general sim-lock like the branded phones have i mean maybe a lite app that runs when you start the phone and blocks you from using the phone if there is no sim or it isn'tt the sim you've previously registered...
Click to expand...
Click to collapse
I got what you need but it is shareware [you have to pay for it].
It is for Wm 5 but i think that it will support higher too.
Did you search on google?
Here is the link: [click].
I searched for the "cra**ed" version but all links are dead or fake.
hi thanks for the reply guys
if you can use password protection why bother such thing!!!
okay, password may be broken by software, but same thing for any kind of security also.
anyway, a program can be written such as:
small memory residence program which will check the sim nr. in every few min.
if not matched, will enter into Airport Mode + screen lock
keep checking every few min.
if it matched the nr. stored before (encrypted) will unlock airport mode+screen
or the program will only trigger at the stratup or sim change
Hi there, I've changed my operator from t-mobile CZ to vodafone CZ. A problem has appeared. I've unlocked phone when i was changing WM6.1 to WM6.5. However phonw writes No signal | Vodafone CZ.. I tried to change operator manualy.. but there isn't vodafone to pick.. I don't know what to do now.. plz help me.. I need my phone every day..
Slide a piece of paper in back of your sim card. Some times sim cards are not fat enough to get in contact with the sim reader. No one knows when your kaiser starts behaving like sim card isnt fat enough, it did for me 2 months ago and till now I have a piece of paper to do the remedy :|
dark_prince said:
Slide a piece of paper in back of your sim card. Some times sim cards are not fat enough to get in contact with the sim reader. No one knows when your kaiser starts behaving like sim card isnt fat enough, it did for me 2 months ago and till now I have a piece of paper to do the remedy :|
Click to expand...
Click to collapse
well i've tried this too.. no success.. ive reinstalled my OS back to WM6.5 and unlock the sim again.. nothing.. maybe a little change.. my phone now shows message: masterchip not provisioned MM#2 ... what the hack?
slunlcko said:
well i've tried this too.. no success.. ive reinstalled my OS back to WM6.5 and unlock the sim again.. nothing.. maybe a little change.. my phone now shows message: masterchip not provisioned MM#2 ... what the hack?
Click to expand...
Click to collapse
Currently Android doesnt support locked sim cards. If you are using Haret Install, you need to PIN unlock your sim card before running Haret, or otherwise install Android on NAND only with an unlocked, right out of the box working sim card.
I know its bad but its this way. Here we usually block PUK code if our sim cards are lost / stolen