This rom was working great, the wifi was starting not too work, then BANG, stuck on my windows boot screen etc, no active sync, but managed to hard reset. Too bad, was working great until then..the faint hearted should maybe wait until is tested further....
I had the same problem...but I am a strong believer in the Schap-Man's ROMs.
I am happy to say even though it was stopped at the Green start screen and Active Sync said it couldn't see it I was able to re-run his ROM and it found the phone and rebuilt it.
Not sure if you tried this yet or not but it sure helped me.
That's pretty wierd. Are u using full or lite, the latest 7-28, wwe...? A lot of others are using this rom. I'm not having any issues with 7- 28 wwe lite version.
BTW...you should have 'posted' this on Schap's rom thread.
You could also try a hard reset.
Same has happened to me quite a few times, now running Sleuth's ROM
Can't wait until Schap's brings out ver "b" or 4.x as his roms are usually excellent.
Hope this helps
mikeycollins13 said:
This rom was working great, the wifi was starting not too work, then BANG, stuck on my windows boot screen etc, no active sync, but managed to hard reset. Too bad, was working great until then..the faint hearted should maybe wait until is tested further....
Click to expand...
Click to collapse
I had the same problem today.... Hardreset needed (Full installation german)
I also had a problem last night. I had just removed the htc homeplug from my today screen when the whole thing froze. I did a SR and got stuck on the green loading screen, left it all night, still the same this morning, so after a quick search on xda-developers before work,
performed a HR and everything is back up and running, minus all my personal data. good job i use PPCBackup to back it up to my storage card.
Whats happening Schnaps..... ? this is most unusual, 3.30c was a dream to run.....
I have had this happen to me 5 times in the last week. I dont believe it is Schap's rom because it did the same thing to me with Black Satin. I believe the problem is software based.
This has been discussed many times in the thread dedicated to my 3.57a ROMs, it is due to some thrid party softwares which are not compatible with this build, but for now I'm not able to tell you what exactly is the source of this problem since I couldn't reproduce it. I'm using this ROM build since 2 weeks and made load of tests, I never had freeze on boot!
To recover your device maybe you can first install a software like SPB Plus I think which offers a failsafe mode, let me know if it works.
I am working on a new ROM and I hope it will definitively get ride of this problem! For now, if you experienced this problem and want a ROM which should be more stable than this one, I recommand you to flash the Schap's 3.54a as it is purely based on the official ROM.
Yea...
This ROM, with nothing else installed, killed the battery in standby in a much shorter time than normal. It also wouldn't turn back on after it killed the battery for an inordinate amount of time... I don't recommend it to anyone. Sorry.
inorbital said:
This ROM, with nothing else installed, killed the battery in standby in a much shorter time than normal. It also wouldn't turn back on after it killed the battery for an inordinate amount of time... I don't recommend it to anyone. Sorry.
Click to expand...
Click to collapse
my experience is absolute contrary: with no other rom i get that much battery life....
and i tried every other delivered since the last 3 months...
i can recommend this rom to everybody.
peter
Schaps for the record. I did a hard reset and and kept all my apps on my SD.
I have never had any problems, however I was playing around and although I cannot prove it, I have a feeling that SBSH's software could be the culprit. Although I doubt just that one.
I will have to change ROM's for the time being as I am leaving on a trip for Europe and can't afford to be down. But your ROM's are always among the best.
I Think some Guys have closed eyes or better sell there device. This ROM is great. Thanks to Schaps
Lordsnake
viczena said:
my experience is absolute contrary: with no other rom i get that much battery life....
and i tried every other delivered since the last 3 months...
i can recommend this rom to everybody.
peter
Click to expand...
Click to collapse
I agree on this one also. With my push email for Activesync/Exchange and my Flexmail set up on two accounts pushed and my GPRS/EDGE connection always on during the day, I have about 40% at the end of the day, (over 16 hours), which is awesome considering i used to get around 4 hours and then i would be down to 20% on all other roms
very great ROM
I have been using the latest Schap's ROM with arabic language for about a week and never had a problem. It is very fast and stable.
MANY THANKS Schap
Cheers,
This is simply the best ROM I have ever used.
I just donated to you Schap.
Thank you.
mikeycollins13 said:
Too bad, was working great until then..the faint hearted should maybe wait until is tested further....
Click to expand...
Click to collapse
So make a thread about it.
Still the best rom...
10 days with schap's 3.57a rom and never had a problem.
bricked?
I thought bricked phones wouldn't even recover from hard reset? It seems a bit harsh to cry "BRICKED" when that isn't the fact. Makes me think of the boy who cried wolf.
Schaps has done a very nice job. However, I felt it was a little slow responding. I'm very impatient. So I flashed the Black Satin ROM. The Black Satin worked for a day or so and then it got stuck on the Black Satin Screen.
I had SPL-1.04 so I used a special fix it ROM which is a 1.18 ROM. Even though I could not get to ActiveSync, I've found that the 1.18 Fix it ROM will flash from the bootloader. It takes about 25 min or more to flash and starts slow.
After flashing, you end up with a WM5 ROM.
Then I flashed the new Official WM6 Dopod ROM (It's a little cleaner than the AT&T ROM).
I've been running the Dopod ROM for a couple week. I've very happy with it. No offense to Schaps. The Schaps ROM has all the latest elements like Arcsoft MMS Composer 4.0.
I hope this helps. The 1.18 ROM can be found on or about page 18 of the Bricked Hermes thread.
inorbital said:
This ROM, with nothing else installed, killed the battery in standby in a much shorter time than normal. It also wouldn't turn back on after it killed the battery for an inordinate amount of time... I don't recommend it to anyone. Sorry.
Click to expand...
Click to collapse
I'm sorry if you had battery issues with my last ROM but if you read comments you would see that you are the only one who had such a problem, many people reported that those last ROMs have the best battery life and I have the same impression!
If you don't recommand my ROMs to anyone, so I have no reason to continue cooking for the community! People like you really don't motivate me to make so much efforts for people who only complain about my work instead of trying to give me clues to solve their problems.
Related
Hi forum!
Before anything, thanks for your invaluable help and support, without it I would feel even more lonly on my PPC life
OK, said so...
I'm having currently some problems with the phone part of this great device. Sometimes when I answer a call (with the hardware key) it takes 2 to 3 seconds before I can hear anything from the person calling me. The same happens when I hang. It takes time to hang the conversation, so I never know if it's really hanged..
Lately I'm having also problems with the "today" app I think. It never shows up and the upper bar (status?) does not change when I receive a call.
I went trhu a hard resseting and restore (Sprite) process 1 week ago, but I had the phone problems before that...
Thanks a lot for your help.
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
thanks for your answer! But I'm currently using wm2003. Though I'm considering switching to wm5 now we can if I don't get a solution to this
I normally use the phone for work-job and this minor things annoys me big deal!
joey jojo said:
by the sound of it, you have upgraded to the wm5.0 rom, i have these problems also, until there is a known fix for the minor bugs, with the today screen you can just go into settings and today, then come out again, and what wasnt there before should be there now, also , have you tried to upgrade the radio rom too??? 8)
Click to expand...
Click to collapse
heelp
PLease, someone help!
There is a peculiar problem in hermes(the best device ever made). Some times the phone led (green) blinks where as the display is off and it fails to start up even if u soft reset.
in the meanwhile if some one calls u he will get a ring but u wont be notified by ur device
this will make the person calling think u r avoiding him
this is the perfect solution tried on atlest 50 hermes
Plz install the following cab then switch off ur device then switch it on again and wolla the sleep to death problem is gone
Take care
HTC zindabad (i.e. long live HTC)
Guess you forgot the cab?
Edit: Ok, here it is now ;-)
Anyone tried this???
To be honest: I find it a little hard to believe: threads all over the place about this SOD. All chiefs searching and searching for the solution.
And now in your first post you have the solution?
Hope it's its true...
Could you please give us some more information than "this is the perfect solution..."?
How does this patch work? any technical detail as to how this fixes the issue?
Great if it does but a little skeptical without any detail?
Cheers
Lee
nittin_sp said:
There is a peculiar problem in hermes(the best device ever made). Some times the phone led (green) blinks where as the display is off and it fails to start up even if u soft reset.
in the meanwhile if some one calls u he will get a ring but u wont be notified by ur device
this will make the person calling think u r avoiding him
this is the perfect solution tried on atlest 50 hermes
Plz install the following cab then switch off ur device then switch it on again and wolla the sleep to death problem is gone
Take care
HTC zindabad (i.e. long live HTC)
Click to expand...
Click to collapse
I agree with pietrucci,
please ... Anyone tried this CAB? we need our forum seniors & moderators answering us.
Thanx for your efforts nittin_sp, and hope it's truly works.
pietrucci said:
Anyone tried this???
To be honest: I find it a little hard to believe: threads all over the place about this SOD. All chiefs searching and searching for the solution.
And now in your first post you have the solution?
Hope it's its true...
Could you please give us some more information than "this is the perfect solution..."?
Click to expand...
Click to collapse
To tell you the truth I have never been able to reproduce the SOD problem whatsoever. I still can't figure out what the heck is causing it.
Anyway, if you doubt nittin_sp, maybe you should tr it yourself and see if it solves the problem.
This was rather uncourteous...
Kevlar-Source said:
To tell you the truth I have never been able to reproduce the SOD problem whatsoever. I still can't figure out what the heck is causing it.
Anyway, if you doubt nittin_sp, maybe you should tr it yourself and see if it solves the problem.
This was rather uncourteous...
Click to expand...
Click to collapse
Didn't mean to be uncourteous...
SOD
IN my whole 6 months having my hermes i had never had SOD until i flashed the official dopod rom with matt kitchen. when I traced the source that SOD had came from it was a bad extended rom flash i done. This cause the device to go sleep after the screen time out, and also if i put the phone in idle mode i had to soft reset everytime.
i flashed an original operator t-mobile rom with the extended rom and all my problems went away.
My device has never been quicker no more SOD and battery life is superb with the new radio 1.47 after one whole day with normal use with 3g internet I am still on 70% battery life.
Now I have the perfect device and i think hermes WM6 crave and addiction will be thinned out as there is not much you can do now with the hermes as to wait for PROTON or fully integrated touchflo working ROM.
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Running new official wm6 no more sod here so cannot verify that it works, but I had alot of sod in various other roms and if this is a solution the senior members/cooks should disect it and figure out what is the real cause of them and what exactly this fixes since they are not so forthcoming.
edit, wait reading it again it says that even soft reset fails to start up, if that is true they are not talking about any sod I have ever had soft reset does what it does resets the device and boots up.
There were many quick fixes trying to figure out the sod problem, sd card issues, active sync turning on etc, maybe this is a cab that does that.
Psiodon
I will try this
I have had SOD's several times a week.
Will try this and get back to you in a couple of days
I find that I have to SRS every morning after not touching the device all night. I have installed this cab and will report back tomorrow about the behavior of the device. It would be wonderful if this actually works. I am keeping an open mind about it.
I don't understand why you're being so mysterious about this nittin_sp. From what I can tell using IDA Pro (sorry, but I am reluctant to simply load something on faith based on "100% fix" claims alone), your patch simply sets the DWORD value "DisableAutoSuspend" in HKLM\SOFTWARE\Microsoft\Bluetooth\sys to a 1. Interestingly, on my TyTN running WM6 this is already set to a 1.
Sometimes its easier to just say this rather then create a cab. That way the rest of the community can work off your findings and perhaps explore this SOD issue better.
If your cab does more than this then please share your knowledge so we can further explore this hermes issue.
ok so I installed this. I've not had any BSOD's since doing so in a 24 hour period, when normally I'm getting them alteast every hour, sometimes more than 1 in an hour. Will report more soon. Would be good if you can post what this does though as I'd like the ROM cooks to build it in.
duttythroy said:
p.s
TRY FLASHED A AN ORIGINAL OPERATOR ROM WITH THE EXTENDED ROM YOU CAN USE ROMKOCH TO EXTRACT THOSE TWO AND FLASHED YOUR ROM BEFORE FLASHING WM6 AND GUANRANTEE YOU WILL SEE AND FEEL A MUCH MORE RESPONSIVE HERMES. THATS MY 2 cents
Click to expand...
Click to collapse
Hi,
Sorry if this is a dumb question - why do you need to extract the ROM and EXTENDED ROM after flashing the original operator ROM and then flash WM6?
Would it be the same if I just flash the official WM6 and reflash with the cooked WM6?
Thanks!
As promised, I am reporting my results. While I have no idea what this patch is doing, for the first time since I have had this device, I have not had a single failure. Coincidence? We will see in 24 hour.
perlmane said:
As promised, I am reporting my results. While I have no idea what this patch is doing, for the first time since I have had this device, I have not had a single failure. Coincidence? We will see in 24 hour.
Click to expand...
Click to collapse
Well unfortunately I have had the problem happen to me once, and I have larger batter drain than before.
jocool said:
Well unfortunately I have had the problem happen to me once, and I have larger batter drain than before.
Click to expand...
Click to collapse
I have not noticed any increase in battery drain, but I did not use the phone much on the weekend. The reality is, the only time I have the problem is when I do not touch the phone and it goes to sleep. When it wakes up, there is an apparent memory issue that SRS easily resolves. But, since I have installed this cab, the issue has not reappeared - yet.
yup over 24 hours and no issue... Its looking good.
spoke too soon - still sod... reduced but still present - what does this hack do exactly?
[email protected] said:
spoke too soon - still sod... reduced but still present - what does this hack do exactly?
Click to expand...
Click to collapse
Me too. Mine just failed about 5 minutes ago. Too bad.
In light of this post Battery drainage tips&tricks How to Increase Your Battery Life I have created a cab with the registry suggestions..it is the same cab that has been around at the Juno section of XDA and the same one that is on allshadow.com both phones share similar Smartphone registries and so the cab should work just fine on the Excalibur.
Here is the download SaveBatteryHTC_Juno.cab
Its a simple step... you install and that is it.. it will just work.. if for what ever reason you don't like it simply uninstall it and your registries should go back to what they where before you installed the cab.
Great post, I would recommend people try this because I tried this myself and noticed much improvement in battery. Also, its a .cab, therefore, you can always uninstall if your phone gets unstable for any reason. Hope this helps everyone and thanks again for this post.
I just installed it, i'll try it out. Thanks for the post.
im going to try dis out cuz i need it
I just installed in on my Excalibur, what exactly does the cab do, I'm just curious
dmd1272 said:
I just installed in on my Excalibur, what exactly does the cab do, I'm just curious
Click to expand...
Click to collapse
LMAO you install something on your phone, that you have no idea what it does??
Never do that.
dmd1272 said:
I just installed in on my Excalibur, what exactly does the cab do, I'm just curious
Click to expand...
Click to collapse
Did you read the first post completely? there is a link to another post of the registry entries info..
Haha its so funny how people install things that they do not know what it does on their phone... Anyways it seems to work excellent. Thanks for this.
I know what this does
but can someone tell me if they actually saw the difference, and i know it basically disables Activesync from syncing automatically but what if Activesync does not sync automatically (atleast in my case, I don't see anything on the task manager)
can someone better explain how it does what it does and correct me if i'm wrong.
on the other hand, my battery sucks - it dies with 1/2 day of use i.e. all i do is make phone calls/maybe use palringo but checks email every 5 mins but now i changed that setting to 2 hours so it doesn't use data that often but so far, it dies pretty soon.
Would I see a difference using this .cab? (to the people that have used it and have seen a difference)
jdoggraz said:
Haha its so funny how people install things that they do not know what it does on their phone... Anyways it seems to work excellent. Thanks for this.
Click to expand...
Click to collapse
No problem
lukybandit said:
I know what this does
but can someone tell me if they actually saw the difference, and i know it basically disables Activesync from syncing automatically but what if Activesync does not sync automatically (atleast in my case, I don't see anything on the task manager)
can someone better explain how it does what it does and correct me if i'm wrong.
on the other hand, my battery sucks - it dies with 1/2 day of use i.e. all i do is make phone calls/maybe use palringo but checks email every 5 mins but now i changed that setting to 2 hours so it doesn't use data that often but so far, it dies pretty soon.
Would I see a difference using this .cab? (to the people that have used it and have seen a difference)
Click to expand...
Click to collapse
There has been many "tests" done on this by many ppl www.allshadow.com most agree that it "adds" 3 hours to your battery life..
You can try this yourself.. turn on your bluetooth and wifi and use your phone on a normal day... remember when you turned on the phone and remember the time you are done for the day and see how much battery life you have left...
then
next day install my cab and do the same.. turn on your bluetooth and wifi and use your phone on a normal day.. remember to start at same time of day you started to track the day before.. and end at the same time.. at the end of day at same time as day before.. look and see how much battery life you have left.. you should notice a difference...
although some say that this hasn't worked for them to where they see an improvement most have said that they have noticed an improvement as I have.
dilfatx said:
No problem
There has been many "tests" done on this by many ppl www.allshadow.com most agree that it "adds" 3 hours to your battery life..
You can try this yourself.. turn on your bluetooth and wifi and use your phone on a normal day... remember when you turned on the phone and remember the time you are done for the day and see how much battery life you have left...
then
next day install my cab and do the same.. turn on your bluetooth and wifi and use your phone on a normal day.. remember to start at same time of day you started to track the day before.. and end at the same time.. at the end of day at same time as day before.. look and see how much battery life you have left.. you should notice a difference...
although some say that this hasn't worked for them to where they see an improvement most have said that they have noticed an improvement as I have.
Click to expand...
Click to collapse
beautiful. I'll do that tommorow and install your cab on the sunday to see the difference. I liked how you laid it out, appreciate it.
I'll post feedback once I'm done the test.
lukybandit said:
beautiful. I'll do that tommorow and install your cab on the sunday to see the difference. I liked how you laid it out, appreciate it.
I'll post feedback once I'm done the test.
Click to expand...
Click to collapse
No problem I, as well as other im sure, look forward to entertain your results.
Simply touching basis on the results of my simple test I have conducted..
I have uploaded to the post the screen pics of the power consumption the battery underwent while it had the cab installed..
Please keep in mind that this test went for two days.. one day(thumnails) with the cab installed and the next day (look at the links) with the cab removed..
On both days I did the usual.. made calls and texts till my fingers got numb..
On both days I started at 0320 and on both days ended at or about 2123 (923pm) on the same day respectfully.
You will notice that the screen caps done withing the phone which had the cab installed that day shows I had a reasonable amount of battery life left at the end of the day..
On the second day which I didn't have the cab installed you will see on the pictures of the phone I took with my camera (windows crashed and it messed up my linux partition.. just fixed it ) it will show you that there is an exclamation mark where the battery meeter is and you will see the battery consumption lower..
dilfatx said:
Simply touching basis on the results of my simple test I have conducted..
I have uploaded to the post the screen pics of the power consumption the battery underwent while it had the cab installed..
Please keep in mind that this test went for two days.. one day(thumnails) with the cab installed and the next day (look at the links) with the cab removed..
On both days I did the usual.. made calls and texts till my fingers got numb..
On both days I started at 0320 and on both days ended at or about 2123 (923pm) on the same day respectfully.
You will notice that the screen caps done withing the phone which had the cab installed that day shows I had a reasonable amount of battery life left at the end of the day..
On the second day which I didn't have the cab installed you will see on the pictures of the phone I took with my camera (windows crashed and it messed up my linux partition.. just fixed it ) it will show you that there is an exclamation mark where the battery meeter is and you will see the battery consumption lower..
Click to expand...
Click to collapse
Nice job man on that.
jdoggraz said:
Nice job man on that.
Click to expand...
Click to collapse
No problem at all..
Hey when I tried installing this .cab(and other cabs) after I flashed my dash to the Rogers rom it says "...cannot be installed because it does not have sufficient system permission." I assume I have to unlock something? I already tried SDA_ApplicationUnlock unless I didnt do it right? help please!
krillic said:
Hey when I tried installing this .cab(and other cabs) after I flashed my dash to the Rogers rom it says "...cannot be installed because it does not have sufficient system permission." I assume I have to unlock something? I already tried SDA_ApplicationUnlock unless I didnt do it right? help please!
Click to expand...
Click to collapse
When I had the Dash I used Ricky's Kavana version ROM i believe it was V24, it didn't have any problems installing cabs.. and yes it seems like your ROM is still somehow locked..
do a search on the forum for networkunlock cab
here is the cab i was talking about.. it also helps to unlock your phone..
I am using the version 24 and it seems to work just fine even with out the application unlock program...
Here's my dumb question for the week... would this work on my moto Q9h??
So I've been using the same ROM (in my sig) on my T-Mobile TP2 for 2 weeks now. Last night I tried to wake my phone (it was on for 8 hours already; being used 4 hours prior to make a PowerPoint using JetCet Presenter 5), and the phone wouldn't wake up. I pressed the soft reset button on the side, and everything was fine. I pressed the power button again before I put it in my holster. Ten minutes later, I pressed the power button to wake it, and it wouldn't wake up again! I did the soft reset thing, and battery was down 5-10%, so I know the phone was on the whole time.
I did a hard reset, and still had same problems. I was going to return it with warranty, so I flashed the stock T-Mobile WM6.1 ROM and everything was fine (I couldn't replicate any of my problems). I went to a different ROM (the latest Valkyrie Leo 23815, I believe?), and I got the same "can't wake" problem.
Now my real problem is the fact that I can't replicate it on the stock ROM. I think it's not the custom ROM because I've used the same one for 2 weeks. I don't know how I can get a warranty swap in this situation... It's not like I can say "Look, I have your stock WM6.1 ROM and it works. How come it can't work with a custom ROM?!"
*I confess I did just download the JetCet Presenter5 cab from these forums just two days ago. I made a PPT (as stated in the first paragraph) for a class and I saved it on my SDHC card. It was working afterwards, but the "can't wake" problem only occurred 4 hours later, and still persists after the hard reset.
Can I please get any help here? I really need a working device with a custom ROM and I don't know how to do a warranty swap in this situation.
Thanks.
SOLUTION: post#19.
(I replied this also on TmoNews forum)
What do you have to do create this problem...just wait and it happens eventually? Or does it happen right away the first time it goes into standby, or you put it in standby? Or is there a specific sequece of events?
How long did you wait after flashing the stock WM6.1 to see if the problem came up?
Maybe you could try flashing the "hidden" official WM6.5 rom...just on the chance that it might fix/delete whatever is wrong. Or it might show the problem so you could return it...after the Jan-20 official release.
Good luck
MCbrian said:
(I replied this also on TmoNews forum)
What do you have to do create this problem...just wait and it happens eventually? Or does it happen right away the first time it goes into standby, or you put it in standby? Or is there a specific sequece of events?
How long did you wait after flashing the stock WM6.1 to see if the problem came up?
Maybe you could try flashing the "hidden" official WM6.5 rom...just on the chance that it might fix/delete whatever is wrong. Or it might show the problem so you could return it...after the Jan-20 official release.
Good luck
Click to expand...
Click to collapse
(Replied this on TmoNews, but this might help others willing to help out)
On the custom ROMs, the first time it goes into standby, I can't wake the phone anymore and I just noticed that it won't recognize the USB cable (no charge from the outlet; no sync with the PC). If I soft reset and prevent it from going to standby, everything's normal (even the USB problem).
I flashed the stock WM6.1 ROM one hour before my first post. Everything is fine except for the annoying old Start Menu and the small, non-finger-friendly buttons!
I'll try the "hidden" official ROM now, just in case. I just don't know how I'll survive without WM6.5.x until after the official release date!
Thanks! I'll need the luck.
...So I think after all the testing I've done, and the weird problems others have posted [in various threads], I believe the problems I've experienced were a result of the new Sense2.5 build 1922 ROMs.
I just flashed the old EnergyROM Dec.4 Leo 28008 (Sense2.5 build 1921) and the problems are no longer present.
Newbie to WM!!!
Having similar Problems with my TP2. My phone has had several "wake up" probs since I have the phone. I installed directly after purchasing the WM 6.5 ROM directly from HTC-support (german). My real problems are right now that my alarm clock is not working properly (sometimes it works, sometimes not) and my phone often does not wake up after stand-by. Last night watched the clock at 04:30 and almost got problems caused by a non working alarm clock... (phone was connected to power supply)
anyone knows more about it? Is it a bug? user faults?
additional added software: Brians Task bar, Mort-player and powerbutton 12.
Just wanna get sure, that the phone is not damaged from hardware's site (warranty)...
Well.. I have (in this days) this problem.. It seems that it's getting worst day by day.
First of all: I've never used a "cooked" rom!
I had the original HTC rom (6.1).
I had this problem so I flashed the 6.5 update and it magically was solved!
Everithing was fine till 4-5 days ago: I can't understand what is the problem..
But I had only one time an "alarm problem".. But maybe was my fault..
I don't know what is the problem but it is NOT related to "cooked rom".
The worst thing is that RADIO MODULE IS ON!
So people call you, write you.. AND THEY KNOW YOUR PHONE IS ON!!!!!
This is totally unacceptable!!!
I would try a coked ROM.. But, as I can read, it would be useless..
And anyway: What is the most STABLE ROM in this jungle?
I'll write to italian HTC support.. I don't know if they will solve anything..
To: chrizz.o and DJ Palmis
chrizz.o: The alarm clock in WM is unreliable sometimes. You could download a 3rd party app alarm clock like Klaxon or G-Alarm.
DJ Palmis: You could also download an alarm app (see my response to chrizz.o). I don't know if you're talking about you can't turn your screen on after it goes into standby (my problem).
I don't know if you guys are confused but my problem is: I can't turn on the screen if the phone goes in standby (screen goes off). The phone is still on, but the screen is permanently off. This only happens to me in the new custom Leo ROMs. It doesn't happen in stock ROMs or old custom ROMs, so I cannot return it.
DJ Palmis, I don't know why it's happening in a stock ROM. You can try a hard-reset (wipe device) by pressing/holding Power button, Talk/Send key, and End key at the same time when the phone is off. That might help. If it doesn't, return it to HTC.
BTW, I think the most stable ROMs are the EnergyROMs, ValkyrieROMs, and the Rhodium_AF (ark666) ROMs.
Same issue w Att Tilt 2
I'm experiencing the same issue, occasionally the screen won't come on from standby when I know the phone is on. It shipped with 6.5 and it remains with the stock rom.
The issue is so hit-&-miss that it is difficult/impossible to trouble shoot.
sumflipnol said:
chrizz.o:I don't know if you guys are confused but my problem is: I can't turn on the screen if the phone goes in standby (screen goes off). The phone is still on, but the screen is permanently off. This only happens to me in the new custom Leo ROMs. It doesn't happen in stock ROMs or old custom ROMs, so I cannot return it.
Click to expand...
Click to collapse
I think we have the same problem, indeed. And i don't want to hard reset because i did not change anything in the last weeks.. I'm only using my phone more frequently.. So more text messages, videocall and so on..
But this does not justify this problem.
It would be nice to know what happens during this "freeze".
Maybe it is related to notification queue (that's why a new rom "solves" problem for a while)?
Well.. Anyway I had this problem on my old HTC Universal.. So it is related to WinMobile or Qualcom..
when i had a issue similar to that. i just hard reset my touch pro and flashed a whole new rom. and hard resetted again and i was bug and error free.
charlieb620 said:
when i had a issue similar to that. i just hard reset my touch pro and flashed a whole new rom. and hard resetted again and i was bug and error free.
Click to expand...
Click to collapse
The OPs issue must be a little different.
He tried flashing several different roms -- stock and custom -- and only the stock T-MoUSA WM6.1 or WM6.5 roms or custom roms that were a month or two old would stay "fixed".
sumflipnol said:
chrizz.o: The alarm clock in WM is unreliable sometimes. You could download a 3rd party app alarm clock like Klaxon or G-Alarm.
Click to expand...
Click to collapse
Cheers for upadating me. Appreciate it. Will try another alarm clock in a while. BUT: I use mort's player as an additional "alarm", as well, and even that does not work propperly. Might be, that it is no real alarm clock. strange and weird.
But it is good to know, that the "will-not-wake-up" problems are more or less known by several other users. I almost thought it is my stupidity to use a win mobile phone *lol*
Does anybody know, eventually, if there's a more stable rom (maybe with the new manila like on HD2) for germany which might solve the freezing problem?
thxx for updates
I'm also getting will not wake problems on the leaked official TmoUS WM 6.5 Rom. I would get it about twice a day. My stock tmobile US 6.1 never had this issue.
A fix that works for me:
Change the power settings to always on for a like 10 minutes and put the default settings back. You would have to do this after every soft reboot.
HTC Italy told me to set Band selection to auto (booth choices) and to change network selection (auto if set to manual or manual if auto) and then they told me to soft reset by button.
I'll write you if I have news.. But i think they know something more than us about this problem. And they are on the way of solving because i noticed that this problem happens in bad quality signal areas and ALWAYS when phone is ON.. So it is related to radio module.
I think it may be related to SIM card, too.
Because they told me to change SIM.. And at last to do an Hard Reset..
Maybe my 3 card is not fully compatible with my radio version?
Hey,
thxx for the updates. Indeed, I have quality differences in our flat, bandwidth switching between HSDPA, 3G and GPRS, depends on, in which room I am.
Asking HTC Germany about this problem, they told me, it is a not known issue. The more I follow up here, I cannot believe that.
Do you really think, it may also be caused by the SIM-card? Mine is about 2 years old (VF GER).
chrizz.o said:
Do you really think, it may also be caused by the SIM-card? Mine is about 2 years old (VF GER).
Click to expand...
Click to collapse
Mine too!
What I know is that i had this problem on my old HTC Universal... So maybe problem is not in the "age" of SIM card.. But in some technical compatibility between SIM and Qualcom.. (You know: 64 KB, 128KB and so on..).
Maybe Qualcom has some problem on european SIM card? I don't know..
DJ Palmis said:
I think it may be related to SIM card, too.
Because they told me to change SIM.. And at last to do an Hard Reset..
Maybe my 3 card is not fully compatible with my radio version?
Click to expand...
Click to collapse
I read somewhere in a ROM thread (I don't remember exactly where) that some people are experiencing constant freezing on their phones after a few weeks of use. Someone recommended taking out the SD card because it might be corrupt, and that interferes with the phone's performance. Some people said it worked; they found out their SD cards were actually corrupt, and using a new one made the phone function well.
Having used ValkyrieROMs before, I remember a pre-installed app (I forgot the name) that let you format your SD card. When I tried it (even after I formatted my SD card to FAT32 on my PC), the app said my SD card was corrupt and cannot be located. The last time I used the app was 1+ months ago. I think I'll try to flash a ROM without the SD card when I have time.
...But I still don't know how the SD card would give me a problem with a (new) ROM that I had on my phone for 2 weeks...and no problem on an older ROM (that I have now)...
sumflipnol said:
SD card because it might be corrupt,
Click to expand...
Click to collapse
Well I don't know, What I can say you is that till now i have no problem with HTC istructions.. Maybe i solved.. I hope..
SOLUTION!!!
I finally got my phone working with new ROMs again!
It was the SD card! I connected my TP2 to the PC as a "Disk Drive" and I went to My Computer > [right click] Removable Storage (SD card) > Properties > Tools > fix... something something (I can't remember exact words). It fixed the corrupt SDHC card I have; now my phone is working again!
This might help you, too, DJ Palmis...
Just had done this right before the last freezing-problem. My SD-card was not corrupt, so this did not solve my problem.
At least I swapped my SIM-card, made another hardreset and checked my SD-card again. Let's see what's happening...
My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
rossle12 said:
My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
Click to expand...
Click to collapse
Stock ROM or custom? Any overclocking?
The phone powers up if you soft reset, correct?
Well, I found out it was a small problem with the rom.
It was a custom rom, and I just installed a different one and it works flawlessly.
With the other one, the light sensor did not work either.
Also, I dropped my phone the other day, and a really small spring fell out.
And the back plain on my screen is loose and opens up easily..
Which ROM?
I hate to hijack this thread but i am having the exact same problem. Basically when i put my phone to sleep its hit or mess as to if it will wake. It seems to have started when i flashed Energy ROM. It was terrible after that, so I switched back to the stock ROM available from the HTC website and all seemed well at first. Now its back to hit or miss.
I cant really rule out a hardware issue such as a broken sensor or something because I'm not sure how the mechanics of it work. When i push the power button on top the phone wakes but not the screen I know this because the 4 lights on the bottom light up and the keyboard as well. I can hit the button repeatedly but it doesnt help. At other times it works flawlessly, but usually does not.
Can anyone give me a suggestion as to what it could be, or a way to rule out a hardware issue?
Exactly my problem!
It was perfectly fine for the first day or so before it started crapping out again..
Can someone please help us with this problem?
It's mind consuming and it's making me worry.
Until TP3 is out, I won't get a new phone ):
Well, the problem is discussed in great detail on the internet, but no one can give a definitive answer. ..
I've been a touch pro 2 user for exactly 3 days... My new HD2 from T-Mobile is in the mail... This is a un acceptable flaw with no real solutiion... Good Luck TP2 users....
Good luck to you.
I've had mine for over two years and it was flawless
Just one recent drop determined everything
Although I Must say, it was one hell of a durable phone
Yea, dont get me wrong. I really like the phone. Thats why I'm getting the HD2. Great OS and big beautiful screen. I'm gonna miss the slide out keyboard but I think thats what breaks these phones.
I'm excited that there's the possibility of running Windows Mobile 7 on it.
rossle12 said:
Can someone please help us with this problem?
Click to expand...
Click to collapse
I'd like to try to help. But you never answered my question of what ROM you are on (and which one you tried previously).
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
djowen6565 said:
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
Click to expand...
Click to collapse
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
HELP: Same problem Phone not waking up
Hi saw this thread and was wondering if anyone can help me.
I have an HTC Touch Pro 2 for some month now...
Using the following details:
OS Version: 5.2.21887 (21887.5.0.86)
ROM Version: 2.07..401.1 (80303) WWE
ROM date: 02/04/10
Radio ver: 4.49.25.91
stock ROM basically...
THe issue is that the phone doesn't wake or when using it just freezes/hangs.
Not much software/apps installed... and memory is good as well.
I just don't know what's going on...
Help please.
Thanks
rossle12 said:
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
Click to expand...
Click to collapse
I'd agree with the notion that its likely hardware related. I've flashed maybe 10 different builds of Energy over the last 7 months or so, and never once had and issue with the SOD (sleep of death) that I can recall. A bad flash can sometimes happen. But since you flashed another reputable ROM (Jackos), that somewhat eliminates the possibility that a bad flash is the culprit.
You can start from scratch, by running Task29 to format the ROM area of the phone's memory, and reflash the ROM. But this would be just to eliminate the possibility of a bad ROM flash. My gut says that you won't see any different results.
Running the phone "clean" for a while (to see if you still have the SOD) without any software installed or any other modifications will eliminate the possibility that any software or mods are responsible for the issue.
are you sure its hardware related? because my phone started doing this yesterday too...I had an energy rom from october, and it was really buggy. I am only able to keep my phone from sleeping when it is plugged in to some power, so i flashed the newest energy rom and still having the same problem...wont wake up from sleep
EDIT:
I dont see how this can be hardware related because everytime i soft-reset, the screen works again. this problem only happens when the device goes to sleep...
Any overclocking?
As I already mentioned, I never had any SODs on Energy that I can recall, except when using OCT (OverClocking Tool).
I have done no overclocking...I just flashed the newest energy rom like 15min ago...is there anything else I can do or check? it looks like the phone works still, just no backlight...
After flashing the ROM, maybe try running it "clean" for a day or two, don't install any software or do any mods, reg edits, etc. If you still have problems with the phone waking up with a new ROM, and no other software or other mods, than it may indicate a hardware problem.
And be sure to run Task29 before you flash the new ROM, if you don't already do that.
You guys should read the following thread:
http://forum.xda-developers.com/showthread.php?t=648134
You're not the only ones (by any means) with the SOD issue. But it isn't at all clear what causes the issue. Lots of different theories in that thread about various software or ROMs, with no clear solution.
Lots of conflicting info, but some comments on the thread suggest (as I mentioned) that Task29 may help (certainly can't hurt).
moto2000 said:
are you sure its hardware related?
Click to expand...
Click to collapse
Nope, definitely not sure, especially after reading the thread linked above. But as I suggested before, Task 29, try a different ROM, and run it clean with no software or mods, and start eliminating the variables.