O2 XDA Exec (UK) Radio error - JASJAR, XDA Exec, MDA Pro Software Upgrading

I have an O2 XDA Exec now with rom version 2.05.00 WME (05/07/07) which seems very good but the proble I have is that I can not load the Radio
Has Error 114 when loading
I have no radio version loaded or any proocol or extROM version showing in device infomation
I have tried loading radio with MaUpgradUt_noID.exe still error and will not load, Tried after reseting PC no luck. So any ideas from here?
bootloader version 1.00
I can nolonger downgrade to 2.02 or lower as has now country ID error

It is not a big problem. Try my folder below, there some tools and helps i have collected thru out the forum. it helps me all the time.
When you flashing with no id tool, some times it works after second attempt.
so try once, and after error try again strait away.
Other ways try WIKI http://wiki.xda-developers.com/index.php?pagename=HTC_Universal

Tried that I seem to have a version 1a radio brick at the moment
Even tried the HTC sim unlock radio version 0.0 update the same result
I think it maybe the radio bootloader has a problem and thats where I am now stuck.
HELP ANYONE?

Related

Radio rom working, but can't be upgraded

I am unable to upgrade radio ROM on my O2 XDA Exec (SIM-free).
When trying to upgrade radio rom from either the bootloader or OS itself, the upgrade process stops at 0% and after 2-3 minutes I get the “error 114: Radio rom update error”. Tried advices found in http://forum.xda-developers.com/showthread.php?t=296901 and http://forum.xda-developers.com/showthread.php?t=296393&page=2, but to no avail.
I'd like to point out that my problem is slightly different because I have not able to upgrade radio ROM at all and the rom the device came with is still working.
Currently the device has Jwrightmcps's Crossbow ROM 2.02.00 (installed without the radio part and v1.01 bootloader. Radio ROM version 1.04.02.
Any help would be highly appreciated.
ubigene

O2 XDA Exec (UK) Radio error

I have an XDA Exec now with rom version 2.05.00 WME (05/07/07) which seems very good but the proble I have is that I can not load the Radio
Error 114
I have no radio version loaded , proocol or extROM version showing in device infomation
I have tried loading radio from MaUpgradUt_noID.exe still error and will not load, Tried after reseting PC no luck. So any ideas from here?
bootloader version 1.00
I can nolonger downgrade to 2.02 or lower as has now country ID error

Help no gsm can flash to any rom without radio

Help
Have read as much info as i can about bricked phone.
Have no radio working shows no gsm on boot
It apears that i can flash to any rom with out a radio, if i flash to one that includes it its stops at 11 - 13% and comes up with an error message 262.
have olipro 2.30 and hardslp7
if i try to flash radiio rom only it wont and stays at 0% until errror message 262
so its a 1a
but not having any luck
please help as this was my dads phone
its an orange spv3100/ herms 100
try reinstalling a stock rom. might work but if you cant install a radio it looks like you have a nice pda but not a phone anymore...
No Not really
The only reason i was having to reflash the phone was that it was locking up all the time, even having flashed the phone it was having problems with Tom Tom.
Please HELLP!
Can some one please advise me on this situation,
is there any way of sorting this out?
stock orange m3100 rom wont flash
Just tried standard orange m3100 rom
it stops at 12% and wont continue,
seems any rom with a radio wont flash past 12/13%
any radio free rom is fine
it wont flash radio only roms
PLEASE HELP
Have you tried flashing radio only?
photoscubaman said:
Just tried standard orange m3100 rom
it stops at 12% and wont continue,
seems any rom with a radio wont flash past 12/13%
any radio free rom is fine
it wont flash radio only roms
PLEASE HELP
Click to expand...
Click to collapse
Have tried radio only roms,
they wont work at all and stays at 0%
have olivpro 2.30 and hardspl7
thought this was ment to prevent bricking?
no, it improves chances of recovering a brick but wont stop it from happening. It loks like your radio is corrupted. You might have to bite the bullet and tell your dad his phone no longer works... sorry for the bad news...
have you tried flashing a rom with radio included through yur sd card. had same issue and this worked for me.
If ya can't install a radio, sounds like your stuck with a pda and not a phone.
Have you tried a number or radio's?
As ultramag69 says
no, it improves chances of recovering a brick but wont stop it from happening. It loks like your radio is corrupted. You might have to bite the bullet and tell your dad his phone no longer works... sorry for the bad news...
Click to expand...
Click to collapse
using hardsplv7 improves chances of recovering, but nothing is 100%
If you flash your phone with manufacturers rom and get everything back to original, see if orange or manufacturer will fix it under warranty or insurance. THIS IS A LAST RESORT AS IF THEY DIG DEEP AND KNOW YOU HAVE MESSED WITH PHONE, THEY'LL DO NOTHING FOR YOU!!!
Personally I have returned phone once due to not being able to receive or make calls. I flashed original rom etc but forgot to put original radio back on. They never noticed and I got my phone back fixed. But this is a BIG RISK.
have now managed to get spl 1.01 on the phone
trying to change to spl 1.04 and reflashing!
however now when i task 32
it has
level FF not Level 0???
any ideas??
shamless bump
Isnt there anybody that can help me?
please
photoscubaman said:
have now managed to get spl 1.01 on the phone
trying to change to spl 1.04 and reflashing!
however now when i task 32
it has
level FF not Level 0???
any ideas??
Click to expand...
Click to collapse
Ditto.
Is there anyway of fixing the corrupted radio? is there no way to "re-write" the radio bootloader?
obviously the radio bootloaders have changed over the different versions of the roms so why cant we "re-construct" the bootloaders in this fashion?
Referring to :HERMES Bootloader 1.01 MFG (WIKI) I cant use the "Flashing SPL-1.04 again" method because my radio is corrupted, so, I lose SuperCID, and don't have access to the lnb command; is there a SPL-1.04.nbS that we can use?!
If there is, would it allow us to use a radio of that version? or is this mute?
I've read several threads and the wiki several times, but, it seems this corrupted radio issue is something new that the wiki's are partially addressing, or, whatever has caused the radio to suddenly become corrupt requires a new method to fix it.
I know i've said I've read the forums, wiki, but perhaps I've missed something? Any assistance is appreciated!
I was wondering if any body had spl 1.04 on their mini sd card?
the method were you just transfer over to the mini card and click on it.
i managed to change my boot loader to version 1.01 this way.
if i can change it to 1.04 can i flash to radio with out it stopping.
thanks
just solved exact problem
Hi
i have been dealing with the same problem for 4.5 hours finally with the help of wiki and pof 's posts i managed to unbrick radio.
first of all i tried almost evceryting. i finally succeed by reseting radio sector. i used mtty to gel into hermes and used commands of one of pof's posts for erasing radio sector.
i dont remember the link but google xda for it. then i flashed tweaked version wich is inclueded in unlocker by pof i aborted the operation in unlocking phase then installed hardspl7
i can use my phone now radio version is 1.10 sth but i didnt tried to install newer radio ( too tired :=) )
i hope it is usefull if anything not clear PM me or write here....
PS:Many many thanx to pof...
bartan
bartan said:
Hi
i have been dealing with the same problem for 4.5 hours finally with the help of wiki and pof 's posts i managed to unbrick radio.
first of all i tried almost evceryting. i finally succeed by reseting radio sector. i used mtty to gel into hermes and used commands of one of pof's posts for erasing radio sector.
i dont remember the link but google xda for it. then i flashed tweaked version wich is inclueded in unlocker by pof i aborted the operation in unlocking phase then installed hardspl7
i can use my phone now radio version is 1.10 sth but i didnt tried to install newer radio ( too tired :=) )
i hope it is usefull if anything not clear PM me or write here....
PS:Many many thanx to pof...
bartan
Click to expand...
Click to collapse
This link you speak of is of high importance!! what were the commands? what was the link?
http://forum.xda-developers.com/archive/index.php/t-280372.html
but after installing radio 1.47 it happened again in one call.
still in square one ....
No SD-card install works (stucks in GSM)
no shipped rom works
i want to ask if there is anyway to erase the whole radio sector ??
rerase command did not work on my hermes may be pof has some solution to this.
bartan
After lots and lots of reading the wiki's and forums over and over again I believe I may have solved the radio corruption problem on my 8525.
Just to let everyone know that I've tried flashing several SPL's; 1.01 MFG, 1.04, 1.10 Oli, 2.10 Oli, 2.60 Oli. Back and forth between the versions but finally I stayed put at 1.10.
I have/had a type 1a brick, but, not from flashing, everything was working great and then it just died. I tried Method 1 of Problem 5: Device shows NO GSM when booting more times then i would like to remember, however, nothing worked. When i tried a Radio only flash it failed at 0% and when i tried a FULL RUU it failed at 12/13% (GSM.nb). Convinced I had a $500 paper weight I got angry tried Method 2 of Problem 5 (see above link) ... strangely on the first try i was able to see the radio (1.40.30.00) and the protocol version as well...
I then thought this was too good to be true and then soft-reset my phone; BAM! "NO GSM".... I tried several times and then finally got the version readouts again... So i soft-reset into bootloader mode
Code:
typed: info 2
returned: HTCS
typed: task 32
returned: Level = 0
typed: rtask b
returned: AT-Command Interpreter ready <--------- YES!!!
I was then able to get enter the AT/Radio Commands so i did what anyone else would do.... FLASH ANOTHER RADIO!!!
I flashed the Radio from HTC_Hermes_SIM_Unlock_v2a and it just finished... I got an error at the end, and after the soft-reset the version stayed 1.40.30.00, but once booted into WM6.1 it immediately picked up the 3G signal... I hope this lasts longer then others have reported.
Should i try to flash another radio that is radio_bootloader 108???
*sigh* ... froze in WM6.1 reset then "No GSM" again... so then i tried HTC_Hermes_SIM_CID_Unlock_v3a but it failed because I kept getting No GSM; so i did the battery trick to get version info's then ran the .bat as instructed and it perfomed the unlock; this time it reflected the radio 1.16.0.0
since I know what it takes to get the radio to flash, i'm trying RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe ..... i mean what do i have to lose right?
[EDIT] it worked... so lets see what happens.... [/EDIT]
[EDIT2] Radio is 1.54.07.00 & Protocol is 32.86u.7020.23H ... so it looks like its perm now... I've been able to send and recieve calls now too.... [/EDIT2]
after several hours of usage, radio no longer responds and WM becomes unstable and after a soft-reset I get "No GSM" ...
Question to Olipro, Des, pof:
Is it possible to log the beginning bootup screen to see what exactly triggers the "No GSM" vs the radio/protocol versions?!?! there has to be something that were missing... it would seem ever since radio 108 this problems have arisen... comments?

Help!! - Can't Upgrade anything on my Diamond

Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)
I get EXACTLY the same... i've tried everything (except a hammer) to fix it.
I'm running
Rom: 1.37.707.1 wwe
Radio: 1.00.25.03
Proto: 52.26a.25.09h
I'm also using Vista 32
(all fresh out of the HTC box)
http://forum.xda-developers.com/showthread.php?p=2338991
Are you running Vista X64 coz i had the same error in it ..
try to flash it with xp!
udayrulz said:
Are you running Vista X64 coz i had the same error in it ..
Click to expand...
Click to collapse
... Running Vista Ultimate 32bit, but not sure if that will make a difference...
I will try to get hands on XP computer tonite....
You can always try running the RUU update utility in WinXP32 compat mode.
What Hard SPL ar eyou using???.... usually the problem...
you will need Developer edition if the ROM is not signed.
developer edition worked for me on Vista 32. Thanks guys!
OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.
Monty Burns said:
OK
I ran a Hard-SPL (from the dev thread) Diamond-OliNex
This completed and did whatever it did and i had to do the basic setup on the phone again.
I have now got the radio ending .06 from this thread this thread and cant get it to work with the OilNex Hard SPL or the 1.34 listed in that thread.
I'm back to square one where Error 262 Update error is occuring.
I'm tring to flash the radio as the O/S i have appears to be running sweet but its having web issues that appear to be DNS/Connection related.
This needs an idiots guide like the other phones have .... 'coz i'm an idiot and I can't do it.
Click to expand...
Click to collapse
Yeah, but for me the problem still is to get ANY HardSPL on the Diamond in the first place.
I was trying to put HardSPL 1.38_Signed to the phone...
Adwinp: thanks for the advice, but did not work either...
As far as i can tell, this may be a problem with the USB driver from the Windows mobility center software...
I will try on real XP and give you feedback tomorrow.
thanks guys.
Doctor_Who said:
...
I was trying to put HardSPL 1.38_Signed to the phone...
...
Click to expand...
Click to collapse
The developer edition i.e. unsigned worked for me.
I am currently going through the stages in the wiki VERY closely. Dont know if they will work :/
Doctor_Who said:
Hello to anyone who can help me...
i am posting this thread after searching this forum for answers to my problem, and i could not find the answers...
I have the Diamond (DIAM100) with Original SPL 1.37.000 and GER Stock Rom installed.
My Upgrade goal is HardSPL 1.38 Signed (Olinex) / DiamondProject V2 GER / radio .05
I try to upgrade SPL, Radio and Rom according to several guides in this forum, but nothing seems to work for me.
I tried using the RUU Program with HardSPL, tried Diamond CustomRUU, tried manual Bootloader access, everytime the Upgrade Software stays at 0% (on the phone also) and after about 5 minutes i get ERROR [262].
Luckily, i haven't bricked my diamond yet, it always came back to life again.
i can confirm, that the device enters bootloader mode, then changes to grey screen with progress bar. But that is all.
Maybe it is a Vista issue, maybe not.
But all i get is ERROR [262]: Update Error
Suggestions, anyone?
Thanks in advance for any serious help...
______________________________________
HTC TD DIAM100
MDA Compact I (Magician, unmodified)
MDA VarioII (Hermes, running Schaps 3.54GER, thanks Schaps great ROM)
Click to expand...
Click to collapse
I had the exact same problems. I tried every possible combination of Hard SPL and ROMs. Here is what worked for me in the end (no problems since):
1. install newest .Net 3.5 on windows PC (don't know if this has anything to do with my problems but after installing everything started working fine)
2. install Unsigned HardSPL (developer edition): http://forum.xda-developers.com/showthread.php?t=400950
3. install chosen ROM / Radio ROM with RUU (Rom Updater Utility): http://forum.xda-developers.com/showthread.php?t=396073
After flashing a ROM the device makes a hard reset so you should backup your data first! http://forum.xda-developers.com/showthread.php?t=299705
good luck!
Finally it worked, also thanks to all who replied in this thread.
So i like to share my experience in this:
1. first i downloaded all SPL and Radio i could find, then i looked for GER language Rom. Quickly decided for DPT V2.
2. First attempt to flash failed completely on a Vista PC (32 Bit Ultimate)
3. Back home, moved all the downloaded files to my XP SP2 PC..
4. Noticed: DiamondCustomRUU would not start in XP, got error message saying "... could not be initialized", so i tried the standard RUU instead, with the shortcut of manually putting the PDA into Bootloader mode...
5. Sucessfully flashed HardSPL 1.38 on the Diamond, and the device rebooted with Hard reset.
6. Next i tried to upgrade Radio to .05 Version... Failed, stuck a 0%
7. Changed SPL to 1.40 (Unsigned), now the Radio could be flashed. Seems that Radio Files are Unsigned?
8. Flashed DPT V2. Success.
But still wondered about the unsigned Radio file...
Again, thank you all
-------------

Problem to flash Radio

Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.

Categories

Resources