Develop Bugs

Opera wont use Wifi

I mainly use 3g to browse the internet with opera, but if i connect to my wireless network and open opera it continues to use 3g. Is their any way i can make it use wireless? I thought it should automatically but it doesn't.
Thanks for any help.

be connected just to wifi

Is that the only way? I use push email that uses 3g and would sooner not disconnect that when i want to use opera over wifi.

I've just checked Internet explorer and that's fine using wifi, but opera still refuses to use it and sticks with 3g. Does anyone elses Touch HD do this?

I'll have a look at mine in a minute, but need to ask a daft question, how can i tell which data source the HD is using for its internet information at any one time?

spud_work said:
I'll have a look at mine in a minute, but need to ask a daft question, how can i tell which data source the HD is using for its internet information at any one time?
Click to expand...
Click to collapse
You can go onto google and search for 'whats my ip' and use one of them sites to see if its your ip address or one used by your operator. Thanks very much.

Sorry, that took a bit longer than a minute.
Opera is using wifi here. However, when I first boot up my phone in my house (i.e. in wifi range) data connection is turned off and wifi is turned on by default. However, even if i switch on the data connection and fire up opera, it still uses wifi rather that 02 mobileweb.
I may talk a wlk down the street later and i'll see if the data connection will come on at bootup if a wifi isn't available

Have you tried going to settings->connections tab->connections->advanced tab->select networks and changing the default connection to "My Isp" or "My work network".
This may help although I have had very similar problems with opera using 3g instead of wifi. I reported the problem HTC and after an absolute age they wrote back saying "That shouldn't happen" without any real advice on what to do next. Since then I have always turned 3g off when turning wifi on. I used to use push email but of course turning off 3g buggers that up so I have settled for syncing every 15 minutes and as a side benefit that seems to have improved battery life.

spud_work said:
Sorry, that took a bit longer than a minute.
Opera is using wifi here. However, when I first boot up my phone in my house (i.e. in wifi range) data connection is turned off and wifi is turned on by default. However, even if i switch on the data connection and fire up opera, it still uses wifi rather that 02 mobileweb.
I may talk a wlk down the street later and i'll see if the data connection will come on at bootup if a wifi isn't available
Click to expand...
Click to collapse
Thanks for your help.
dcoales said:
Have you tried going to settings->connections tab->connections->advanced tab->select networks and changing the default connection to "My Isp" or "My work network".
Click to expand...
Click to collapse
I've tried what you have suggested and opera did use the wifi, however when i turn wifi off it won't use 3g until i go back into those settings and set it to do so.
I've noticed that if i turn my phone on and don't use the 3g connection opera will use wifi fine, but once i turn wifi off or go out of range and use 3g then return to wifi opera refuses to use it and sticks with 3g. I just don't understand why it's fine using wifi so long as it hasn't used 3g.

how to disable data connection

How I disallow any application to connect to the internet in HD?
Just to make sure not charged.

no data from modaco

is that just for grps? I am using 3g. was wondering whether that will work or not.

use HD tweak
there's is an option to disable data connection, for people who are on vacation

I personally find that HD Tweak doesn't always work for all roms, and if you try to connect t to wifi using certain apps, GPRS is still used.
Use No Data and toggle off connection so only wifi is avilable for phone to use, therefore no data connection. If you want to use data connection at any time, toggle it back on. Simple, yet effective

Well guys I tried installed nodata.cab and did a reboot.
But it still activates my 3G or if available HSPDA connection.
Am I missing somthing?
But on the other hand, the on of switch of your data connection should do just that.....stay off. Whats the use of an off switch if it self activates all the time. Imagine all your light coming on at home when it gets dark!

m.dekoning9 said:
Well guys I tried installed nodata.cab and did a reboot.
But it still activates my 3G or if available HSPDA connection.
Am I missing somthing?
But on the other hand, the on of switch of your data connection should do just that.....stay off. Whats the use of an off switch if it self activates all the time. Imagine all your light coming on at home when it gets dark!
Click to expand...
Click to collapse
Have you toggled it off in the app?, i.e. Internet & WAP

I have HD Tweak installed but none of the settings used, but I find that when using the 3G internet, if I press the end call key (bottom right) once, it ends internet connection for me. If I hold the end key down its set to keypad lock.

no data doesn't work at all for 3g hspda connection. That is a dangerous application name I would say.

Question regarding disabling Data connection GPRS (TP2) T-Mobile

I recently received a T-Mobile Touch Pro 2 cell. I'm NOT paying for web service and would like to only use Wi-Fi. If I disable my data connection under the communication manager, would this mean that I will not be using T-Mobiles web service and only my Wi-Fi? Can I still receive calls/text messages when the data connection is set to off? Do I have to worry about the data connection setting automatically turning on by itself for whatever reason?

DADDYDC650 said:
I recently received a T-Mobile Touch Pro 2 cell. I'm NOT paying for web service and would like to only use Wi-Fi. If I disable my data connection under the communication manager, would this mean that I will not be using T-Mobiles web service and only my Wi-Fi? Can I still receive calls/text messages when the data connection is set to off? Do I have to worry about the data connection setting automatically turning on by itself for whatever reason?
Click to expand...
Click to collapse
Yes.
Yes.
Yes.
Flipping that switch manually turns off your phone's 3G connection, and you can still make/receive calls/sms. However, as soon as some app or process needs a data link (ones that don't/won't use the wifi connection), it will flip that connection right back on.

sirphunkee said:
Yes.
Yes.
Yes.
Flipping that switch manually turns off your phone's 3G connection, and you can still make/receive calls/sms. However, as soon as some app or process needs a data link (ones that don't/won't use the wifi connection), it will flip that connection right back on.
Click to expand...
Click to collapse
Which apps do I have to worry about flipping the connection on? I only plan on surfing the web and I don't plan on setting up my e-mail account. I only want to text and browse the web using my TP2. Thanks for the response.

DADDYDC650 said:
Which apps do I have to worry about flipping the connection on? I only plan on surfing the web and I don't plan on setting up my e-mail account. I only want to text and browse the web using my TP2. Thanks for the response.
Click to expand...
Click to collapse
Well Google Maps for one, it insists on downloading through your 3G data connection even if you're connected to wifi. There may be others that will ignore a wifi connection and fall back on 3G, I don't know off the top of my head, you can dig around here some to see if there's any reference to that (I know I've seen it, just don't have it bookmarked)

Yes, some apps are automatically enabling the data connection.
My solution:
go to Settings > Connections >
and delete the 'data connection' for your provider.
Their you could also go to advanced and choose which networks will be used for what type of connection; play with it.
The data connection isn't used for 'calls', only if you are calling over IP (skype e.g.)
With a program like SPB wireless monitor, you can see which connection has used how many bandwidth.
HTH,
Fossie

fossieniel said:
Yes, some apps are automatically enabling the data connection.
My solution:
go to Settings > Connections >
and delete the 'data connection' for your provider.
Their you could also go to advanced and choose which networks will be used for what type of connection; play with it.
The data connection isn't used for 'calls', only if you are calling over IP (skype e.g.)
With a program like SPB wireless monitor, you can see which connection has used how many bandwidth.
HTH,
Fossie
Click to expand...
Click to collapse
How do I go about deleting the data connection from my provider? I'm lost!

There is an easier way. Use the Modoco NoData cab and it turns off the data connection until you turn it back on. This way if you decide that you want to use the data later you dont have to find out and enter your settings again.
It works very well.
For those who want to restrict the data to thier home carrier ie: no roaming the Dynamic+ NoDataInRoaming is ideal as it automatically switches on and off when you enter and leave your home area.

Wifi use for email and Opera

Firstly I apologise if this has been answered already but I've tried searching and couldn't find an answer.
My email and internet works perfectly over a 3G connection but I spend a lot of my time travelling and so as not to incur high roaming charges I would like to be able to use a wifi connection for my email and internet. The problem is that even when I have a wifi connection both of these applications still try to use the 3G signal.
I expect I am probably missing something quite basic but I can't seem to work out how to make these applications use the wifi connection instead of 3G.
If someone could explain this to me I would be very grateful. If you can provide an idiots guide of step by step instructions that would be even better.
Thanks in advance for your help.
Matt

For email go into the account settings for each email account and under advanced server settings change the connection. on AT&T it defaults to Media Net. Change this to The Internet and this will allow it to use wifi if it is on.

I always set my Wi-Fi connections to connect to my Work network, and leave AT&T as The Internet. Then in the Connections settings, I switch the preferred networks for applications to access the internet between Work and The Internet depending on what I want to force the phone to use. Works for ALL applications that access the internet, not just email. For a long time I didn't even have an AT&T data plan, and that's how I forced my phone to use Wi-fi.

dalavar said:
For email go into the account settings for each email account and under advanced server settings change the connection. on AT&T it defaults to Media Net. Change this to The Internet and this will allow it to use wifi if it is on.
Click to expand...
Click to collapse
Thanks for the hint. But how can I change the preferred connection (e.g. wifi) using my hotmail-account for email? I can't find in the account-settings.
Any ideas are welcome!!!
Energy.RHODIUM.21907.Sense2.5.Cookie.Jul.01.7z
HTC TP2

[Q] WiFi networking - advice needed

I am completely ignorant of the WiFi configuration and purpose on this phone. Can anyone help?
1) I have an unlimited data plan. Should I care about using WiFi at all?
2) If I have a 4G/3G signal loss, will WiFi automatically kick in to sustain a signal?
3) I currently have no WiFi networks attached, and a scan returns nothing.
Should I be attaching WiFi networks manually. If so, how?
4) Should I just allow my battery optimizer app to disable WiFi?

mds54 said:
I am completely ignorant of the WiFi configuration and purpose on this phone. Can anyone help?
1) I have an unlimited data plan. Should I care about using WiFi at all?
2) If I have a 4G/3G signal loss, will WiFi automatically kick in to sustain a signal?
3) I currently have no WiFi networks attached, and a scan returns nothing.
Should I be attaching WiFi networks manually. If so, how?
4) Should I just allow my battery optimizer app to disable WiFi?
Click to expand...
Click to collapse
1) That's upto you. If your speeds suck, or are in a terrible reception area (switching between 4G and 3G a lot, or stuck in 3G), then Wifi can be faster.
2) If you lose 3G/4G data, it may not connect to wifi unless your configured network is nearby. Normally, wifi will be always connected unless you're out of range of that particular signal.
3) Make sure Wifi is switched on. (switch will be blue in the on position). If you don't see any networks, then there are none. You may have to add networks manually, but thats because its not broadcasting its SSID (ie making itself visible), but thats usually in like a corporate environment.
4) I have noticed that being on Wifi saves me some battery than being on 4G, but your results may vary.

I can only offer advice on the first one. I also have unlimited data but I use wifi whenever possible. Wifi doubles my battery life. Using 4g all the time kills it way too quickly.
Sent from my Galaxy Nexus using XDA

mds54 said:
I am completely ignorant of the WiFi configuration and purpose on this phone. Can anyone help?
1) I have an unlimited data plan. Should I care about using WiFi at all?
Click to expand...
Click to collapse
if you're happy with your speeds then no. WiFi does save battery though.
2) If I have a 4G/3G signal loss, will WiFi automatically kick in to sustain a signal?
Click to expand...
Click to collapse
No, because WiFi isn't always on (or shouldn't be), and won't automatically turn on. You'll have to turn it on manually if 3G/4G isn't available.
3) I currently have no WiFi networks attached, and a scan returns nothing. Should I be attaching WiFi networks manually. If so, how?
Click to expand...
Click to collapse
If there's no WiFi around you, then there's no WiFi around you... The only reason you'd have to manually enter a network is if you're at home and aren't broadcasting your SSID, so you won't pick it up on a scan. You should elaborate more on this.
These comments make me think you don't understand how WiFi works....
4) Should I just allow my battery optimizer app to disable WiFi?
Click to expand...
Click to collapse
Battery optimizer apps don't always know what's best. Usually how they work is they'll turn off WiFi when you get out of range of your house or other specific location (via GPS). Then enable when they "know" you're at home (again, by GPS). Usually its easier to just have a toggle widget for WiFi and turn it on when you're at home if you want it.

I think this additional info may be useful:
Wifi is not a feature of your phone service through your provider. It is a completely different technology that replaces, not amplifies, your 3g/4g connection when it is on and connected. When you are using your phone's data connection, you are connected to the internet through your phone provider, which is also functioning as your Internet Service Provider (in your case, Verizon).
A wifi signal only exists when a wireless device is broadcasting it locally. Most often this is a wireless router in someone's home, office, or a store that offers wifi for its customers. In this case, your internet connection goes through the router, then to a hard-wired internet connection off to whatever ISP the service is paid for through.
It is a much shorter-range technology than your cell service. As such, while your phone will eat through your battery boosting its signal if it can't connect to a cell tower, your phone will use much less energy looking for wifi signals.
If you are absolutely sure that you will not be connecting to wifi networks in your daily travels, you should turn wifi off and not worry about it. If you have an existing wifi connection at home/work, then leaving wifi on and letting it connect will save you battery when you are within range. The idle drain of wifi when it is looking for networks is fairly low, so if you are going to be spending large amounts of time in wifi zones, you might as well just always leave it on.
If your phone shows no wifi available by a scan, chances are very slim that there is a non-broadcast network that you would be able to connect to manually; someone is keeping it hidden and it is most likely password-protected as well. Most private networks will be visible to a scan, but are probably password protected. You will need to connect to these manually; your phone will not alert you to their presence. Your phone will automatically let you know if there is an unprotected network in range. By default, if wifi is enabled, it will automatically connect to any network that comes into range that you have already connected to.

Wow, you guys are good! Thanks!