Related
There seems to be a problem with my Orbit's data connection. When it is first turned on it doesn't automatically show whether I'm in GPRS or EDGE area. It just has the two opposing arrows and an "x". Tapping on this pops up a window and it states that programs will automatically choose when to use a data connection. Ok, great. That shouldn't be a problem. Connecting with PIE or Opera 8, the data connection automatically starts the connection and stays connected. Even after closing either browser. Which is good because this brings me to my problem. I also have the email program called Good loaded. If I try to start this before one of the above browser's, it will try to connect, then show it connected, then drop the connect back to the "G" or "E". 10 seconds later it trys again. It does this for 3 or 4 times then gives me an error stating "there's a problem with my data connection in the roaming area...". But, if I connect to PIE or Opera first, my email client works just fine. This is also a problem if I make/take a phone call. This closes the data connection, my email client tries to reconnect but can't.
This brings me to my questions (yeah!). Is there a registry hack to make the data connection stay connected always? Meaning after a soft reset it auto connects, and, after a call it auto connects as well? Thanks.
I have exactly the same problem. Basically I need to start IE first after a soft reset to make a connection. After that I start Goodlink to use the connection, and access to email etc. The connection also drops periodically, anywhere between 1 to 20 hours. Also, if I perform a synch using ActiveSync, I have re-start IE to get a connection again each time. Therefore, connecting and reconnecting is a issue unless you use IE.
I've used the GB-Soft Tweak, set to "GPRS Aways On", but it makes little difference. Tried to change one or two registry settings, but get message stating it's not accessible, and read-only !. I think unless anyone has any other idea's, we'll have to wait for any forthcoming ROM updates for this fix. Clearly the Artemis is having issues with GPRS connections for Goodlink, unlike it does for other applications that requires a data connection.
Other than that one major bug, works perfectly.
I've fixed mine. Made the following registry hack (mine saves so I guess it's unlocked).
Edit the following:
HKLM\ConnMgr\Provider\7C4BA38*****\TMobile U.S.
The "*****" folder may be different on your device. TMobile U.S. is what I called my Internet Connection in Connections. Your's wll be different of course. Edit the following: AlwaysOn from 0 to 1
Once I reset, the device comes up an automatically connects. No launching IE or Opera. Reconnects after a phone call too. The only time it doesn't is after connecting to a computer and using ActiveSync. Still working on this.
Hi,
Many thanks for the tip. It worked !. The issue was the Regitsry Editor I was using, not allowing access to change the registry key, but changed to PHM's Registry Editor, made the change and like yourself after soft reset, connected, and so far hasn't dropped.
Let me know if you get any work-arounds for the remaining issue i.e. after connecting to a PC using ActiveSync.
Cool! Glad it worked. I wonder if it's one of those issues where Good isn't "officially" supported on the Orbit. I work in IT and I know how vendors can be when you call them for a non-supported device.
I upgraded my Cingular 8525 today to Windows Mobile 6 with no problems that I can see except for one annoying thing.
When I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I have my 8525 set up for Microsoft Direct Push. In the past, the 8525 would sync with Exchange through my computer and it's network connection. Now this not seem to work since upgrading to Windows Mobile 6.
===========================================
Many thanks to the folks who discovered this fix. You would think ActiveSync would have put this entry in itself. I was seeing both error code 85020006 and error code 80072f7d.
One simple registry edit and all is working perfectly. See below:
From: http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
#23 If you are using ActiveSync 4.2 and have a problem with Desktop Pass-through it may be caused by a Layered Service Provider (LSP) that use the Windows TCP/IP stack. This has been known to occur with ISA Server. The registry file LSPValue.reg will reverse this setting. Microsoft and the Pocket PC OEM does not support users that edit the registry.
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
If you are using ActiveSync 4.2 and have a problem with Desktop Pass-through it may be caused by a Layered Service Provider (LSP) that use the Windows TCP/IP stack. This has been known to occur with ISA Server. The registry file LSPValue.reg will reverse this setting. Microsoft and the Pocket PC OEM does not support users that edit the registry.
RAlfieri said:
I upgraded my Cingular 8525 today to Windows Mobile 6 with no problems that I can see except for one annoying thing.
When I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I have my 8525 set up for Microsoft Direct Push. In the past, the 8525 would sync with Exchange through my computer and it's network connection. Now this not seem to work since upgrading to Windows Mobile 6.
Any ideas are appreciated. I'm guessing it is another ActiveSync anomaly.
Regards,
Rob
Click to expand...
Click to collapse
just untick Enable advanced network functionality
/start/settings/connections/usb to pc/
Hmmm... I did and it still gives me the error. Code 85020006. Cannot connect with current connection settings. Microsoft Exchange - Attention Required.
Other ideas?
Regards,
Rob
This MAY help you:
right click on the activesync icon in your system tray (on the pc).....click "connection settings".
on the drop down menu titled "This computer connects to:" change this from automatic to "the internet", then apply the settings.
Cheers! Thanks for the suggestion. I got a different error now.
Synchronization could not be completed. Please try again later. Support Code: 80072f7d
You gotta' love it (or not)...
Regards,
Rob
Same Problem
I know this problem, but never found a working solution.
I can uncheck "Advanced Network Functionality", or change to "Work" under connection settings to succesfully sync with Exchange again, but thats not an option for me.
I want to have work and internet connection at the same time, because I also want to sync my IMAP account over the internet, and update my Weather Forecast automatically.
I know when I hard reset my device, it will work again, but I already did a clean install 1 week ago.
Who really knows why its working one day, and the next day it isn't working anymore???
I guess the problem occurs while using exchange-sync and IMAP at the same time. I had exactly the same problem. And in general, there is a problem with new ROMs since other users have to disable "advanced usb mode". That wasn't the case with older versions of WM6.
This helped for me:
1) Using Black Satin ROM
2) Do not use Schaps Advanced Configuration Tool
But my point is:
WHY is it working for several weeks, and then suddenly it STOPS working??
There must be an explanation isn't it?
It seems to be a problem with my PPC, cause when I perform a hard reset it will work again(but who knows for how long?)
Your link is dead
Pass Through Problem Solved
I upgraded my Dopod 838Pro to Windows Mobile 6 with no problems. Since then when I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I used the following settingscombined and they worked GREAT!
- just untick Enable advanced network functionality/start/settings/connections/usb to pc/
- right click on the activesync icon in your system tray (on the pc).....click "connection settings". On the drop down menu titled "This computer connects to:" change this from automatic to "the internet", then apply the settings.
MCEITLIN said:
I upgraded my Dopod 838Pro to Windows Mobile 6 with no problems. Since then when I have my device connected to my desktop, I get an error when trying to sync with my Exchange server.
I used the following settingscombined and they worked GREAT!
- just untick Enable advanced network functionality/start/settings/connections/usb to pc/
- right click on the activesync icon in your system tray (on the pc).....click "connection settings". On the drop down menu titled "This computer connects to:" change this from automatic to "the internet", then apply the settings.
Click to expand...
Click to collapse
This works for me. Vp3G 3.0 Rom. I sync with 2 desktops as well as exchange. Although I'd get errors the sync would still happen for the most part. Now it's perfect though!
Great thread - very helpful.
help!!!
i cant sync with my pc....error no 85010014...
also i m nt able to upgrade my rom...whenever i select a ruu wrapper it says failed to initialize...sumone pls help on this...
thanks in adv
its showin the same warning"failed to initialize properly"
i tried variuos roms(shamanix,tnt,funkey's ,etc) but its still not workin...
guys i updated my .net framework n the roms r gettin updated but my sync still doesnt work
Just another data point... I had the same issue with my Mogul. I tried all the settings changes (Internet, Disable Advanced USB, etc, etc) Nothing worked until i read the MS thread and noticed someone got it working by turning on wifi and then turning it off. Worked for me also. Seems like some settings are getting cached somewhere....
Sorry for digging up and old thread, but I thought I would share something related to this subject.
I recently got a new Kaiser and Dell D830 laptop supplied by my work and was quite annoyed to be getting the 80072f7d error when syncing my exchange email via activesync while connected to my laptop with a USB cable.
I had came across the allowlsp registry setting which resolved the error, but since I was away on a 3 week work trip with nothing much to do, and not being happy about basically disabling a new 'feature' to make something work I was determined to get things working the way they should.
Going by the below articles I noticed that the registry entry either enabled or disabled Activesync desire to use LSP's (Layered Service Providers).
http://pdaphonehome.com/forums/sams...3050-activesync-4-2-internet-pass-thru-2.html
http://www.microsoft.com/windowsmobile/help/activesync/troubleshoot.mspx
As the first link clearly states, Activesync ability to use LSP's is a good thing:
This allows for improved compatibility in environments where connections to the internet must be passed through these LSPs
Click to expand...
Click to collapse
So in situations where one might be using their laptop in numerous different locations and on different networks (airports, hotels etc) we would want it left on.
As per the second link:
When other applications install additional LSPs....
Click to expand...
Click to collapse
It pointed to the fact that some other application installed on my laptop must be causing the problem.
A quick google on "Layered Service Provider" Dell found me an article on the Dell website mentioning that:
Some versions of the Wave software written for Dell include the file biolsp.dll that adds Wave's Layered Service Provider (LSP) to the Winsock catalog, which...htm Future releases of Wave software written for Dell will not include biolsp.dll.
Click to expand...
Click to collapse
So I figured...hmm...I have a bum LSP on my machine, and I have crazy pre-installed Dell software which uses one which is known to cause strange problems. A quick deinstall and reboot later and now Activesync is back working the way Microsoft intended...using LSP's but capable of syncing via pass-thru connection.
I'm happy to have found problem/cause/solution instead of a potentially problem causing workaround....and it passed an hour or two in a lonely Hotel room...win win
other solution
this was posten in on of other messages and it worked great for me...
Delete the partnership with Activesync then reconnect my device and it started working again.
(Make sure you phone is not connected to the USB)
Open Activesync --> File --> Delete Mobile Device
fix outlook, and advance options off did not help..
sadik007 said:
this was posten in on of other messages and it worked great for me...
Delete the partnership with Activesync then reconnect my device and it started working again.
(Make sure you phone is not connected to the USB)
Open Activesync --> File --> Delete Mobile Device
fix outlook, and advance options off did not help..
Click to expand...
Click to collapse
This fixed also my Problem with 80072f7d
First of all thanks to Schap. I am using schap's compiled WM6.
I have 2 small problems.
The first one is:
I setup a WIFI connection, than launch the application which will use Internet!
(I.Explorer or VPN, etc..)
When I do some request from any application, my PPC tries to dial a number to connect via EDGE, GPRS or HSDPA, even PPC is already connected to Internet!!
The internet explorer downloads the page without any problem but at the same time i always cancel dialing via gsm or umts line.
Is there any way to make PPC avoid dialing a connection when I connected wia Wifi???
The second one is:
I have the latest version of Trinitiy with 400Mhz Samsung and 128Mb RAM. But since i cracked and reinstalled WM6 instead of WM5, it works slowly. I clicked to Start button, menu scrolls in 3 seconds. It is like running vista on pentium III processor. Is it normal? or I made a mistake during configuration?
Is it possible to upgrade RAM?
Regards to everyone...
For your 2nd problem, can you try to disable cleartype and touchflo ?
Thanks..
Now it is working faster. But i have always the same problem concerning the wifi issue...
When I am connected to the internet via Wifi or activeSync the bottom of IE says "Connecting ... 0 KB." At the same time it tries to connect via 3G, GPRS or EDGE. Then I get a message saying "Cannot connect with current connection settings. To change your settings, tap Settings."
I have tried everything on connection->settings. But still tries to connect via cellular line even there is a connection to internet!
Rizzis said:
First of all thanks to Schap. I am using schap's compiled WM6.
I have 2 small problems.
The first one is:
I setup a WIFI connection, than launch the application which will use Internet!
(I.Explorer or VPN, etc..)
...
Click to expand...
Click to collapse
I think i have the same problem, but in my case, it connects internally, so, when i click the internet button, i get a delay of like 15 seconds before to get any screen. this is happennig recently... it was working fine until 1 or 2 days ago... i have the proxy settings on the internet connection... im thinking that this maybe related.
Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link
I just flashed the original ROM to my phone last night as an attempt to clean it back up. So far I've installed: Google Maps, Seven, Opera 5 mini beta, Microsoft My phone, Advanced Config tool, .Net 3.5, eras2r 3G CommManager Addon, Marketplace, and MS 3.5.
I had the latest Facebook app installed and it worked, decently. When I uninstalled it and installed an older version I started to not be able to connect to FB or to my internet. I've tried resetting settings, and restoring a lot of items to default. I have sense uninstalled FB from my phone completely but still can not connect to the internet on my phone. I am able to receive e-mails. I'm connected to 3G (showing an H connection) and tried to switch it over to Edge but still no dice. I'm connecting to Media Net for any connections that try and access the network.
I did make some headway by connecting to the WiFi at work. When connected I can connect to the internet just fine. This however is limiting and I don't like connecting to wifi if I don't have to.
I was using ActiveSync to transfer some cabs to my phone from my pc and just unplugged it when I finished the last transfer, hopefully that didn't cause the issue. I've performed numerous SoftResets but still having the issue.
Anyone know what I can check? I'd like to avoid Hard Resetting if possible as I hate having to set up everything again.
Edit: Forgot to add the error message when trying to get on the internet:
"Connection Failed: Unable to connect. Please review your network settings."
Is anyone able to help? This is really frustrating me
An update (hope this helps): I ran the "Enable hidden proxy" feature that the ROM comes with and switched opera over to a Socket connection. This allows Opera to work fine, but not in HTTP mode (like it was this morning). I am still unable to connect to Facebook.
Demonic240 said:
An update (hope this helps): I ran the "Enable hidden proxy" feature that the ROM comes with and switched opera over to a Socket connection. This allows Opera to work fine, but not in HTTP mode (like it was this morning). I am still unable to connect to Facebook.
Click to expand...
Click to collapse
You are going to need to provide more information. Which carrier (they have different Internet settings), which "Stock ROM" version.
Sorry, I'm using the Tilt 2 on the AT&T network. I eventually got frustrated enough with it yesterday that I performed a hard reset, which fixed it. I flashed the March 17th version of the 2.5 Energy ROM and had a hiccup at one point. I don't know if this is related or not, but I had plugged my phone into my work laptop and used active sync (it's now set to file transfer instead) so that I could charge my phone. About 5 minutes after unplugging it from my laptop I was unable to go to any website. A soft-reset resolved it.
edit: I really think it may have something to do with my plugging it in to my work computer. Right now I can't connect to FB via the app, I can open Opera and google search, but when trying to go to a website it gives me: "Could not find proxy server"