Related
Hi,
picked up a shiny new MDA III yesterday afternoon having switched providers - number transfer in progress - so I'm new to both the handset and the provider.
Managed to get the unit hooked up to my home WiFi network pertty simply etc and got the Active Sync sorted etc.... other than the fact the GRPS isn't configured out of the box, I've got a single major bugbear to sort.
That is that I don't seem to be able to get MSN Messenger to connect.
It's exhibiting exactly the same symptoms suggested here.... http://support.microsoft.com/default.aspx?scid=kb;en-us;832515
... but obviously the refers to a previous OS version ?
So, either I have something to fix or unlock in the set-up, the port is blocked on the handset (works fine on my laptop on the same WiFi through the same firewall) ?
Had a search through the forums, but to no avail. Can anyone help me on this ?
Are there any recommended patches/fixes I should have installed straight from the off ?
Thanks in advance !
Matt
OK, just so you you don't think I'm totally clueless, from what I've just been reading in the T-Mobile online manual, I have to have the GPRS connection open to connect to Messenger.
Is this right ? Surely if I have a active WiFi connection is should be able to connect using that, right ? Will it connect via GPRS and then pass it over to WiFi ?
I'll have to check it when I get home to see if I can resolve it in that way.
Any other tips gratefully received !
Matt
I'm using Messenger with a CSD (GSM) connection because it's part of my allowance. Sorry but I haven't tried WiFi yet.
I'm having the same problem.
MSN Messenger works fine using GPRS but fails to login using my Wifi connection.
What's even weirder is that it works ok when docked (ActiveSync)!!!
I'm using MDA III on T-Mobile (UK)
Anyone got any ideas?
I've tried replicating this issue, but on my XDA IIs over WiFi, it connects to messenger no problem... it doesn't even try to initiate a GPRS connection first. I can only assume that the MDA III is configured slightly differently out of the box.
As a thought, you might want to double-check Connection Manager and see which type of connection is set for programs that automatically connect to the internet
Ok, home and finished doing the set-up.
I've found no way of using MSN by any other protocol than GPRS. If you are WiFi atached and attempt to use MSN, then it will drop the WiFi connection and instead pick up GPRS. And obviously you're on for .075p per kb... which might be the real answer in why T-Mobile have set-up the device in this way.
The 'programs that automatically connect to the internet' doesn't seem to allow you to select WiFi as the default connection, only the range of GSM/GPRS options and the 'My Work' one.
Should I use the 'My Work' VPN option and set that up to use WiFi ?
If anyonebody has got any tips on how to set or hack this... seems there are a few of us that might benefit !
Just out of curiosity: if you go into your WiFi manager, have you specifically told the device that the WiFi card in your MDA III connects you to "The Internet"?
I can't recall whether that was the default setting before I set up my wireless network connection on my IIs... it seems like such a no-brainer, but it could assume that your WiFi connection is to a work network etc.
I'm at work and it 's at home.... but I'm adamant that that it knows that the WiFi connection connects to the Intanet. As you say, I think that it is the default setting
However, I will check !
Any other MDA III owners shed any light on this ?
There seems to be a problem with my Orbit's data connection. When it is first turned on it doesn't automatically show whether I'm in GPRS or EDGE area. It just has the two opposing arrows and an "x". Tapping on this pops up a window and it states that programs will automatically choose when to use a data connection. Ok, great. That shouldn't be a problem. Connecting with PIE or Opera 8, the data connection automatically starts the connection and stays connected. Even after closing either browser. Which is good because this brings me to my problem. I also have the email program called Good loaded. If I try to start this before one of the above browser's, it will try to connect, then show it connected, then drop the connect back to the "G" or "E". 10 seconds later it trys again. It does this for 3 or 4 times then gives me an error stating "there's a problem with my data connection in the roaming area...". But, if I connect to PIE or Opera first, my email client works just fine. This is also a problem if I make/take a phone call. This closes the data connection, my email client tries to reconnect but can't.
This brings me to my questions (yeah!). Is there a registry hack to make the data connection stay connected always? Meaning after a soft reset it auto connects, and, after a call it auto connects as well? Thanks.
I have exactly the same problem. Basically I need to start IE first after a soft reset to make a connection. After that I start Goodlink to use the connection, and access to email etc. The connection also drops periodically, anywhere between 1 to 20 hours. Also, if I perform a synch using ActiveSync, I have re-start IE to get a connection again each time. Therefore, connecting and reconnecting is a issue unless you use IE.
I've used the GB-Soft Tweak, set to "GPRS Aways On", but it makes little difference. Tried to change one or two registry settings, but get message stating it's not accessible, and read-only !. I think unless anyone has any other idea's, we'll have to wait for any forthcoming ROM updates for this fix. Clearly the Artemis is having issues with GPRS connections for Goodlink, unlike it does for other applications that requires a data connection.
Other than that one major bug, works perfectly.
I've fixed mine. Made the following registry hack (mine saves so I guess it's unlocked).
Edit the following:
HKLM\ConnMgr\Provider\7C4BA38*****\TMobile U.S.
The "*****" folder may be different on your device. TMobile U.S. is what I called my Internet Connection in Connections. Your's wll be different of course. Edit the following: AlwaysOn from 0 to 1
Once I reset, the device comes up an automatically connects. No launching IE or Opera. Reconnects after a phone call too. The only time it doesn't is after connecting to a computer and using ActiveSync. Still working on this.
Hi,
Many thanks for the tip. It worked !. The issue was the Regitsry Editor I was using, not allowing access to change the registry key, but changed to PHM's Registry Editor, made the change and like yourself after soft reset, connected, and so far hasn't dropped.
Let me know if you get any work-arounds for the remaining issue i.e. after connecting to a PC using ActiveSync.
Cool! Glad it worked. I wonder if it's one of those issues where Good isn't "officially" supported on the Orbit. I work in IT and I know how vendors can be when you call them for a non-supported device.
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
It is a PC connection problem
Try to enable PC internet sharing
simontee said:
Connected to my home WIFI but I can't surf the internet with my P800W. I have not problem with my laptop.
Any settings that I need to config in System/Connection.
Please advise.
Thanks.
Click to expand...
Click to collapse
Chek the settings your wi-fi card connect to Internet or to Workplace
....
Thanks for all the advise but my problem still not resolved yet.... not too sure whether is my home WIFI+router setting or my P800W setting problem.... this really getting to my nerve !!!
1. I can connect to my home WIFI and able to surf internet with my laptop.
2. I can connect to my home WIFI and able to surf internet with my old pda MITAC 558.
3. When i use my p800w... can connect to my home WIFI but cannot surf the internet. The weird part... managed to surf the internet few times... and then cannot surf again/..
Please help !!
I'm facing same problem also..
I can connect to Wifi, but when try to open website, using IE
is stuck on LOCATING....
WiFi Issues
I have exactly the same issues and have tried installing both Opera and Netfront to no avail. I can connect to Wifi perfectly can then sync Avantgo, download quick GPS updates and surf a couple of pages, then the DNS seems to fail, have tried with DHCP and fixed IP's. Think the o2 Orbit has some sort of DNS cache fault...As a side issue when the Orbit does connect it runs the Internet very slowly...Both a XDA IIi and XDAs run perfectly on the same wireless!!
Get the devices early and wait for the fixes!!
the same thing on Artemis - device gets IP from WiFi Access point by DHCP, but without DNS. I set DNS manually and Internet is working thought WiFi now.
I had the same problem then installed Wi-Fi Companion, issue resolved. You can download a trial for three days from Pocketgear or Handango.
I changed the wireless mode of the router to only wifi g
has anyone any idea how to get round this yet?
Tried to connect today and all that happens is ie sits there saying 'locating'
I tried Wifi companion..it shows me connected and everything but still can't surf the net.
how can I set DNS manually? might be worth a try
thanks for any help
quick update...Ive just been doig a tracert and ping of my service provider and although the trace and ping come out ok...i.e. still just sits there saying locating...
anyone any ideas?? getting desperate here
Apologies..another quick update....
it's not that I can't connect to the net..it's that there is a default page on IE that tries to connect to pda.o2.co.uk or something..and this page is either not there or something...so, changed the default page and I'm good to go...
apologies again
Mine did the same ... Heres the fix ... It has trouble locating the home page . Type in manually to the address line the url for say GOOGLE and wait for it to connect . Then go to tools options and save current page ( Google) as home page and hey presto ! Sorted
Hi
I also have a similar problem
I have a 802.11b broadband router (linksys) which works fine with my two wifi PC's and my Wifi XDA Exec to access the Internet and collect e-mail
I just got an XDA Orbit and although it "sees" and connects to the Broadband router it will NOT allow access to the internet or e-mail (apart from one very short half page of ntlworld.com home page on one occasion)
WORST than that , when I use the XDA Orbit with Wifi and Internet Explorer - it HANGS the wi-fi router after about 30 secs and I have to reset it before I can access the Internet from any other PC's !!
What am I doing WRONG ???
Any suggestions welcomed
I tried the above 'fixes' and it DID get me a BIT further
i.e. I was able to get a connection to google.co.uk for about 30 seconds and do one enquiry - but then it STILL hung the router and the XDA Orbit was stuck saying 'locating'
Take a look here this worked for me.
Sorry did not work for me - after 30-40 seconds of surfing IE hangs on 'locating' and the router hangs and has to be re-set
ANYTHING TO DO WITH 802.11b compatibility ????????
Where can I get Opera browser to try that ?
How many posters have fixed this problem ?
OK
I downloaded the latest trial version of OPERA and tested that
EXACTLY the same result
If I switch on WiFi and connect to the Internet via Opera, I can access the internet for about 30 seconds, then the browser cannot access any more
If I switch of WiFi on the Orbit quickly, then the Router is OK - if I don't, then the Router Hangs and all my computers lose internet access
Has anyone else seen this ??
Has anyone cured this ??
Is is an 802.11b problem ??
Up until the official AT&T release of WM6 I have been able to use Slingplayer Mobile on my 8525 (both WiFi and over the AT&T network). I recently updated to VP3g's latest. I am able to work fine over local WiFi, but not over the AT&T network. My thoughts are the it's part of the AT&T crack down on MediaMax users (which I am). I don't use it that much over the network, but was wondering if anyone else has this issue since upgrading to the 'official' release.
I have read on other forums that other users are having the same issue. Basically, when working over the network, I get to the 'Starting' and notice that the indicator goes from H to 3G after a few seconds...and then the message pops up.
Everything else seems to work fine, tho I don't have as much program space (20 MB vs 27 MB) as I did on VP3g's 3.0 version.
mac_fan said:
Up until the official AT&T release of WM6 I have been able to use Slingplayer Mobile on my 8525 (both WiFi and over the AT&T network). I recently updated to VP3g's latest. I am able to work fine over local WiFi, but not over the AT&T network. My thoughts are the it's part of the AT&T crack down on MediaMax users (which I am). I don't use it that much over the network, but was wondering if anyone else has this issue since upgrading to the 'official' release.
I have read on other forums that other users are having the same issue. Basically, when working over the network, I get to the 'Starting' and notice that the indicator goes from H to 3G after a few seconds...and then the message pops up.
Everything else seems to work fine, tho I don't have as much program space (20 MB vs 27 MB) as I did on VP3g's 3.0 version.
Click to expand...
Click to collapse
I use slingplayer with vp3g's newest rom. works no problem.
I have MediaMax too. wap.cingular works fine.
Run the disable proxy cab and try it then...
And make sure that your My ISP is set to wap.cingular with [email protected] pw. (for the mediamax workaround without using the MediaNet connection(which I believe has a built in proxy)).
But try the disable proxy...
Thank you for the response. I did try the disable proxy with no change in the result (it installs successfully, but Sling does not work).
I was not implying that it was anything to do with VP3G's version of the new OS...I'm sure it's something that I forgot to do.
I was thinking it might have to do with a recent upgrade from DSL Ultra to Xtreme (where you have a dedicated IP address)...so today I performed the Slingplayer internet access setup again. Tried to access via the AT&T network with the same results...
Locating
Connecting
Starting...
Starting...
Then after about 5 to 10 seconds it goes from H to 3G and and back to H and I get the SlingPlayer popup that says 'Cannot continue streaming due to weak connection. Please try again later.'
I have 3 bars, so I don't think it's the signal...I wonder if something needs to be setup on the DSL modem now that it has a dedicated IP address...
Thank you again for any suggestions.
mac_fan said:
Thank you for the response. I did try the disable proxy with no change in the result (it installs successfully, but Sling does not work).
I was not implying that it was anything to do with VP3G's version of the new OS...I'm sure it's something that I forgot to do.
I was thinking it might have to do with a recent upgrade from DSL Ultra to Xtreme (where you have a dedicated IP address)...so today I performed the Slingplayer internet access setup again. Tried to access via the AT&T network with the same results...
Locating
Connecting
Starting...
Starting...
Then after about 5 to 10 seconds it goes from H to 3G and and back to H and I get the SlingPlayer popup that says 'Cannot continue streaming due to weak connection. Please try again later.'
I have 3 bars, so I don't think it's the signal...I wonder if something needs to be setup on the DSL modem now that it has a dedicated IP address...
Thank you again for any suggestions.
Click to expand...
Click to collapse
Having a static IP should not change your upload speed on DSL. It does however mean that you don't have to enter the million digit finder id for the slingbox anymore, just put in your static ip with the proper port.
Have you always been in the same place when this happened? Always at home perhaps? or work? I'm thinking that it might be a tower issue....hmmm
You of course can use PIE and get on the internet no prob right?
Two bars of signal should be fine, I've gotten it to work on one bar of EDGE before (awful quality, and choppy) so it should work great with that strength..,,,
OK. Try this. From your house try to get on (from the 8525) and see if
1) Network lights on slinglink flash(if you have one)
2) Red lights on the slingbox come on/flash (red network should flash I believe; red led on the "u" should come on if connected
Sounds like you are connecting to the box, but losing connection after the handshake.
Go to www.dslreports.com and do an uplink speed test from your home network. Gotta rule out everything....
Hope this helps.
I had the same problem, but upgraded my slingbox to the next build and it is working again. I'm using a PC, and when I loaded slingbox on my pc it said a new version is available.
I've found someone with the same problem!!
My XDA orbit with WM6 slings fine within my home wifi network but doesn't work anywhere else over gprs or wifi.
Interestingly, it works fine outside my home if I share a wifi connection with my laptop but if the phone connects itself, I get the locating, then streaming then weak connection.
I guess it's an issue with the wifi connection on the phone but quite why it works on my home network but not anywhere else in the world is a mystery!
I have the latest software for slingbox.
All help gratefully received
Jon
Which Slingbox Mobile version are you using? Version 1.2 does not work on WM6 (unless you run the patch floating around here) and version 1.5 does.
Very strange
Very strange. Mine works fine with the ATT WM6 Rom. I have cable so I DNS. Every once in a while i get the issue you are talking about but I just soft reset and then the I connect no problem. In case you want to narrow it down...I use the following:
Slingbox Classic
Time Warner Cable
8525 with WM6 and slingplayer version 1.5
I have verified that the issue occurs whether I'm near home or 60 miles away, in either case going through the AT&T network. I do see the light come on my slingbox pro when the PDA says Starting. I've checked and I have the lastest versions for windows, mac, and mobile. I'm wondering if there is some issue with my router as I do remember having to reboot that a few weeks ago (you can see that I don't use the mobile version that much, but of course now I miss it).
I'll check on the router and let you all know. I did have 4 bars today when testing from home...and as I said it works fine via my home WiFi.
Thank you all for the support, it has been great!
Works fine for me w/ Vp3g 3.62
I have a standard vp3g rom w/ 1.54 radio. My Slingbox pro works fine w/ a 3G connection, but no so good w/ Edge (no surprise there.) I'm even running a wireless ethernet bridge to it - not hardwired. I can't explain why you are having any issues, but do confirm you have the latest ROMs on all your networking equipment, including the slingbox and your Router. Good luck.
Still no joy...wondering if I should re-install the OS...I installed Sling Player Mobile again, removed, then re-installed because I noticed that it wasn't listed under the program list via add/remove programs...I suspected that there was something with the last install...
I re-installed ActiveSync 4.5 on my PC because it was acting funny (would disconnect from my PDA with no message sometimes) that seems to be fine now...
I checked my router...it has a passthru setting for my Slingbox IP address and std port.
My DSL modem has IP Passthru to my router...
My only thought is to re-install the OS which has been a pain because I have Garmin Mobile 10 and have been reloading the maps each time so that they are available...I'll copy the garmin folder from My Device to my desktop, maybe that will remove this necessity...
Any more ideas let me know...
Thank you,
Tim
I ran the mobile speed test on DSL reports, at 400k it said 633/512/437 kbs, earlier in the day it said the file was too small. At 1 MB I got 574/454/499 kbs, earlier in the day it was 791 kbs.
I'm in south Florida, I'm using:
ROM version: vp3G 3.62.3
ROM date: 10/11/07
Radio version: 1.50.00.00
Protocol version: 32.83.7020.20H
SlingPlayer Mobile 1.5.0.98
SlingPlayer is loaded on 2GB storage card. It was working with vp3G 3.60...and 1.50.00.00.
I reloaded the OS and with just sling player loaded on internal...still no joy.
I reset the DSL modem to factory settings and enabled IP Passthru for my router, no joy.
I even set my slingbox in the DMZ, no joy.
I'm wondering if it's something to do with my radio..1.50?
I have another option...besides DSL I have cable and may try connecting the sling box through that...
Any other ideas?
I've verified setup for internet viewing via my PC...
Just an idea... Try orb.com.
I stream my video via a connection to cable on my PC via Orb.
Mike
Interesting findings this weekend. As mentioned previously, I have internet access via cable modem and DSL Xtreme. I moved the slingbox, pc, and router over to my cable modem. Setup everything so that the PC could see the Sling locally and it works fine. When I try to configure for remote viewing, it does not work! I manually configured the router and still no Joy.
I then put the router and slingbox on the DSL LAN and reset the router to defaults (no port forwarding, etc.) Configure everything to work locally, then setup remote network viewing...sling setup thinks all is fine. I check the router...nothing has changed, no port forwarding entries, etc. So I manually configure.
I hook my pc up to the cable modem directly, get internet access and attempt to connect to the sling. It connects almost immediately and then sits on Optimizing for about a minute without any bars or activity going on within the viewer.
I'm wondering if this is a problem with my router...I can run speed tests with multi megabyte files without any issues...
My router is a d-link wbr1310..which used to work...but I guess it's possible that my problem has been discovered...any thoughts?
BTW, I down graded my radio to 1.48 prior to doing all of this and that didn't make any difference which led me to do all of the following for problem isolation.
Thanks for any thoughts...
Tim
Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link