Related
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
TwoPlus1 said:
I had this with my T-Mobile ROM, the .exe file expands the files into a temp directory, the only one you need is the .NBH.
1. Copy this file to your storage card and rename it 'HERMIMG.nbh'.
2. Plug device into mains charger.
3. Push & Hold the side 'OK' and 'Power' buttons.
4. Reset the device.
5. Your now in bootloader.
6. Holding the 'Reset' button with the other two will make the device search for and run the HERMIMG.nbh file.
7. Make a coffe or something... (It takes about 25 minutes).
Click to expand...
Click to collapse
This is the quickest fix I have read about. Works with out a hitch for everyone who has done it.
Cool. I m happy I can finally do this. Although I would like to fix the keyboard instead...Anyways what solution do you guys know of that will fix the keyboard? Also where can I get that .nbh file?
Thanks a lot!!!
You can either use WinRAR to unpack it or if you run the .exe it will unpack to '\Documents and Settings\User\Local Settings\Temp'.
I would suggest going back to this ROM as a diagnostic tool to make sure the keyboard isn't faulty...Just make sure you upgrade to SPL 1.35 Olipro first as this makes your phone almost unbrickable in future! If you do brick it so either your stuck in bootloader mode or the OS won't start follow the above instructions...
Well, I know for sure that my keyboard was working perfectly fine before doing the WM6 rom. I have tried fooling around in the Registry...didn't make it worse, but didn't make it better either. What values do you guys have for the qwerty in the registry? Also is there a program that will let you program what key gets what symbol?
I know I am trying to decide between factory, or trying to fix this keyboard characters mix up...
Thanks again.
Not to over-simplify, but what phone are you using? If it's the 8525, there's a CAB file to remap the keys to right places... just search for 8525 keyboard fix.
-Steve
roace said:
I installed the WM6 Black, and my keyboard is not inputing the right chars...I tried the RegEdit fix but nothing. I am trying to revert to the factory Cingular settings and I am using RUU_Hermes_CINGULAR_WWE_2_1_.06.502.3_6275_1.33.31.00_108_Ship.exe. I keep on getting update error message. I have no idea what to do...Please help me. I am getting very frustrated with this thing. I looked at the Wiki and I see nothing regarding my question. Same thing for the forum.
Thank you in advance.
Click to expand...
Click to collapse
Here is keyboard .cab file fix.
Thank you very much guys. I solved the issue. The fix I ended up using was; going to my local Cingular store and beaming a reg editor into the live 8525 they have there, and looking at the registry where the qwerty is located the hexadecimal value on it is 40409 (located @ local machine/software/oem/qwerty/). Please let others know about this fix for the Cingular 8525.
Also thanks a million to those who actually put a linky and not just say there is something somewhere...
Thanks again,
Cris
I just purchased the US AT&T Samsung i907 (US i780).
The keyboard sucks. Press and Hold = repeat; not ALT CHAR. Also the keyboard can only accept 1 key input at a time.
With No physical Dpad, the keyboard needs to be fully working.
The keyboard is the same as the i617, but they use different drivers.
i617 = \windows\keypad.dll
i907 = \windows\zylonite_keypad_Us.dll
I've tried grabbing this file off of my friends i617, but copying the file would produce an error or a 0kb file. Using a USB Cable and Activesync wouldn't even show it when browsing files.
I have all the required registry keys that I need... but I'm looking for this "keypad.dll" from a Blackjack II. I've downloaded a few ROM dumps from WM6 and WM6.1 but all I get are RAW files, which I'm assuming are from a Kitchen.
Without getting too involved in Blackjack II Rom and Kitchen setup, does anyone have access to this file they can upload or have a method for me to extract this file myself?
some remote registry editors show the "real contents" of the phone... you may be able dump that way
just out of curiosity sake.... what kind of a drive do windows pick up the mobile device..... you might be able to right a batch file or use ms dos commands (copy function) to dump things...... i dunno, food for thought.....
edit: you can also try mtty or putty
anyone with any other more definitive answers? I'll be the first to admit I have no idea what I'm doing.
I have the RAW ROM Dump files, but I'm assuming you have to be some sort of magical wizard to open them or have a Kitchen.
Any wizards out there have a kitchen they can shoot me a link to an uploaded blackjack 2 keypad.dll?
Bump
Hey, I'm sorry to inform that i cannot help you with this, but if you made any progress, I'd very much like to know how you did it. I need a new driver for the same reasons as you. Looking for a BJ2 keypad driver and with that a scandinavian layout config.
I'm also very interested!!
@player911
Please!! Dont give up! I would like to help. but i have no idea how.
I hope you made a little progress in that problem.
Good luck and keep up you good work in improving the i907/US i780.
I'll upload if I can off of my BJII. I am thinking of getting the Epix, so this will help me a lot.
Will update soon.
I have the same problem in I600
The relationship is still in OEMMITS.
It has a great relationship.
How would I go about to extract this .dll?
Write to the exact.
and from which the device, you toss it
How to update keypad.dll
My actually driver don't work
Relase topic........
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
~~Tito~~ said:
Rename the file? If it doesn't work, just rename it to something else then the original driver will appear. Can you upload it so I can test?
Click to expand...
Click to collapse
Do You need keypad.dll from i617?
Yes ! Do you have it?
~~Tito~~ said:
Yes ! Do you have it?
Click to expand...
Click to collapse
Yup.. here You go.
Thanks a bunch! Now to test on my machine ! Backing up right now, and I am about to replace the file when its done. I renamed the keypad.dll to zylonite_keypad_Us.dll, just to see what will happen with out any mods to the file.
EDIT:Ok, here's what happened.
The mouse movement works, but any button presses, keyboard presses do not work. Nothing works except the optical mouse, but it has no click function. Some one has to edit the file to be compatible with the i907/i780. The backlight didn't work either. I got it back to normal, I just deleted the file then soft reseted and the keypad was working again.
EDIT 2:
I opened the DLL in word pad, and there is a lot of things linked to the middle scroll wheel and the 4 way navigation it has. Some one might have to copy some things for the top functions, like the left and right soft keys, the call and end button, the ok and start menu button, and the click of the optical mouse. The remove the functions of the Blackjack 2 like the home button and such.
EDIT 3: Can someone provide the zylonite_keypad_Us.dll for me?
I have the same problem on my i600
i was in the windows directory looking for the .exe file that starts & stops the wifi but i only found the start file. what im looking to do is use the left softkey to start/stop it. Does anyone know what file it is?
Hmm anyone??
Hello friends,
I am trying to figure out how to script a specific registry change which I can toggle off and on on my Rhodium without manually running a registry editor. The registry key I want to be able to toggle between 0 and 1 is:
HKEY_LOCAL_MACHINE\Drivers\Console\OutputTo
I have searched heavily, and read about MortScript, but I feel there must be a better way to get this very simple task done.
The reason I want to be able to toggle the above registry key between 0 and 1 is to properly run a Command Prompt (like DOS prompt) on our lovely Rhodium. If you happen to be interested in getting the Command Prompt on your Rhodium see the web site listed below (everything will work as soon as we can toggle the above registry key, without being able to toggle the key the Rhodium's boot process will get clogged by the command prompt window, which is quite a nuisance).
http://dalelane.co.uk/blog/?p=122
If anyone has any ideas I would be very great full. Thank you!
Can't you just cab up two separate registry tweaks and then create shortcuts to them?
Making Cabs from two registry tweaks would be ideal, and I am asking someone for a hint on how to accomplish this.
If anyone has any idea on how to create/write a registry tweak and 'compile' it into a Cab please advise.
Thank you in advance
i could make up a simple EXE to do this will that help?
please PM me more info regardign it
Thank you for the offer, I actually spent more time on it and figured out how to create two .CAB files, one would set the registry to "0" and the other would set the registry to "1", but I was not able to create an .EXE file.
If you have a minute to create an actual .EXE file that would be superb to my solution of two .CAB files.
I am attaching the two .CAB files for the group.
try the attached exe and let me know
just copy to device and run it
I appreciate the attempt, but unfortunately the application you wrote does not produce consistent results in my quick testing. Sometimes pressing Visible changes the registry key and sometimes it doesn't, it seems like pressing the Invisible key has no change upon the registry at all.
If you could revisit the code that would be great.
Thanks
While Cooking for LEO, many CABs has a self registering Dlls which runs fine from the cab file but when you try to convert the cab to OEM package, this dll looses it self registering functionality because there wasn't any code grabbed to the OEM package that tells the Kitchen to mark it for self registering.
Is there any solution for such a case?
To Make it clear:
I'm trying to cook "MOBiDIV_PrayerTimes_Diamond2_B15_TSD_Jun1.Cab " but the problem with the included "fileosp.dll" which requires self registration that is been automatic done while installing the .CAB
So, is there any kind of solution to do it while COOKING the ROM?
Use kheb to grab all the registry keys that are installed during the cab install/reset process. Then put them in your package. Or just search for the keys. We're talking the HKCR\clsid keys, aren't we? They're usually easy enough to find, if you dump and search your registry.
Farmer Ted said:
Use kheb to grab all the registry keys that are installed during the cab install/reset process. Then put them in your package. Or just search for the keys. We're talking the HKCR\clsid keys, aren't we? They're usually easy enough to find, if you dump and search your registry.
Click to expand...
Click to collapse
Thanks for your idea.
I did already and got all clsid and inject them in the package but still the same.
It seems emulator is behaving differently than actual device, what you think?
InCities.cdb
After ROM Booting, i re-install the Original Application, it works.
This is normal because the original application is doing something with InCities.cdb file.
I knew that my registry entries is correct because:
1- I checked everything in registry before and after my modification.
2- I checked everything before and after Original Program Change.
changes are identical
BUT
BUT
WHEN I PLAYED WITH (CHANGED) THE REGISTRY ENTRIES:
FROM
[HKEY_LOCAL_MACHINE\Software\Apps\Shared]
"\\Windows\\InCities.cdb"=dword:00000001
TO
[HKEY_LOCAL_MACHINE\Software\Apps\Shared]
"\\Windows\\InCities111111111.cdb"=dword:00000001
then copied another file as the same name
then tried to change it back to original, THE APPLICATION FAILED.......................................
So, Here is the trick but i don't know how to fix.