Related
hi,
my prophet's tıouch screen was broken. i want to replace it and i have got a new one.
but.. i don't know how can i open the case and change it?
can you help me?
changing prophet touch screen
check out http://www.modaco.com/Changing-prophet-case-t240109.html&
thanx
thank you for your response
Question about touch screen
My prophet is kinda crazy with the touchscreen. It needs to be calibrated every minute. almost every time i need to use it. I have cleaned it very well. Also the dust under the case but it still has the problem. I am now convinced that the digitizer is the problem. I can get it for a reasonable price. I know how to disassemble the prophet, but when you have the screen (the whole lcd) in your hand. How do you take the digitizer apart? How do you install the new one? Can somebody help me or give me another advise to rescue my old digitizer!
i just changed my digitizer yesterday..
it's pretty scary because you have to cut the top layer off..
this layer is a touch mask and a glass..
so when you cut it of form the sides the glass brakes..
then you have to cut loos the digitizer's connector, stick the new digitizer on and solder the connector back on..
it's realy scary to do but with me it worked, just lay everything you took apart in the right order so you can put the pieces back properly..
i got my digitizer from ebay, it game with screwdriver, digitizer, case opener and a protection film..
oh yeah, and a little piece of cloth to clean your screen ^^
good luck!
The parts are also available (cheaper) here:
http://www.phoneystore.com
Removing the touchscreen from the LCD is a delicate operation, because you run the risk of cracking the LCD.
To remove the touchscreen, you should use a very thin piece of fishing line. Wrap each end around your index fingers (like you would with dental floss) and wedge the line between the touchscreen and LCD. Move the line from side to side and it will cut the touchscreen free.
thanks to both of you. I´ve just bought my digitizer from phoneystore.com. Waiting for It to arrive. Told you when I have the part.
OK, so I dropped my phone and the LCD went out, I hooked the phone up to the laptop and the phone still works fine, even the touch screen works. ( I used My MObiler to see phone screen on the pc).
I bought a new LCD screen off of Ebay and replace it, now, the LCD screen works, but for some reason, the touch screen stopped working.
When I took the LCD apart from the touch screen, there seem to be a layer of grease of some sort between the touch screen and the LCD. I wiped it off with a lens cloth, don't know if that caused any problem.
Also there is a dark film (tinted) glued to the touch screen when looking from the back, what is that for? I looked at replacement touch screen on Ebay but none of them have the tinted film layer. I've search all over the internet for instructions but can't find any.
So my question is, what are the correct procedures for replacing the LCD screen and the touch screen (digitizer) ? Also after I installed the new LCD screen, the screen is very reflective and the glare is really bad, how do I fix that problem?
Thank you experts!!
You should have replaced both the LCD screen and the Digitizer. There are complete kits on ebay as well as instructions/tools to complete the replacement. Did you purchase the digitizer also?
bojangle said:
You should have replaced both the LCD screen and the Digitizer. There are complete kits on ebay as well as instructions/tools to complete the replacement. Did you purchase the digitizer also?
Click to expand...
Click to collapse
I went ahead and purchased the digitizer by itself after the original stopped working. Hopefully, it will get my phone back to normal. Thanks for your reply!
in the wiki theres disassebly instructions of the device that should help you (but you probably already know that since you've already switched out the LCD)
In my experience, i have never replaced either the digitizer, or the LCD by themselves, i've always bought LCD+Digitizer and replaced them as one. Seems like the Digitizer is usually glued onto the LCD and i never wanted to mess with that.
fone_fanatic said:
in the wiki theres disassebly instructions of the device that should help you (but you probably already know that since you've already switched out the LCD)
In my experience, i have never replaced either the digitizer, or the LCD by themselves, i've always bought LCD+Digitizer and replaced them as one. Seems like the Digitizer is usually glued onto the LCD and i never wanted to mess with that.
Click to expand...
Click to collapse
I should have ordered the kit instead of just the LCD. What lead me to order just the LCD is when I hooked the phone to my pc and confirmedthe digitizer still worked. And since this is the first time ever I disassemble a phone, I assumed the two things were separated.
But my digitizer should come in tomorrow so I'll just have to wait and see. Thanks for the info.
where did you find a guide to take apart the TP2? I just had the unfortuante luck of smashing mine in the car door as I got in....it fell out of my pocket the exact moment i was closing the door....
My screen is shot, but other than that the device appears to work. I can power on, and try to dial after I press the hard key for the phone pad. The touch portion seems to work, but from your luck, I guess I am looking at having to replace both...
anyhow...any advice on guides and how to find the stuff on the ebay would be apperciated.
I still have 18 months of a 2 yr contract....sucks....and it sucks doubly becuase i just took the insurance off last month....grr..
forcemac said:
where did you find a guide to take apart the TP2? I just had the unfortuante luck of smashing my in the car door as I got in....it feel out of my pocket the exact moment i was closing the door....
My screen is shot, but other than that the device appears to work. I can power on, and try to dial after I press the hard key for the phone bad. The touch portion seems to work, but from your luck, I guess I am looking at having to replace both...
anyhow...any advice on guides and how to find the stuff on the ebay would be apperciated.
I still have 18 months of a 2 yr contract....sucks....and it sucks doubly becuase i just took the insurance off last month....grr..
Click to expand...
Click to collapse
Here's a photo guide of the disassembly of a Rhodium (TP2), it might give you some insight. There's also been a number of threads in this section about hardware parts and the screen/digitizer in particular, listing places where people found/ordered replacement parts.
forcemac said:
where did you find a guide to take apart the TP2? I just had the unfortuante luck of smashing mine in the car door as I got in....it fell out of my pocket the exact moment i was closing the door....
Click to expand...
Click to collapse
The disassembly instructions are here: http://translate.google.co.uk/trans...ka/htc_touch_pro2/&sl=ru&tl=en&hl=en&ie=UTF-8
I did not follow those instructions since I did not want to open the back of the phone.
What i did was I tilted up the phone and used a very small screwdriver and unscrewed the two screws from an angle (it worked).
Then I pried the back of the tilting part of the phone all around to reveal the inside. Be careful not to pull too hard on the flat cable since it's still attached to the back (body) of the phone.
The LCD and touch screen are glued together (I didn't know that before). At this point I would remove the tape that is attaching the flat cable to the back of the LCD, and also lift up the clear yellow tape and detach the three connections.
The widest ribbon is from the LCD, the medium one is for the 4 hard buttons in the front, and the little one is for the touch screen.
I would suggest wearing some sort of anti-static wrist strap (I think I fried my touch screen along with the flat ribbon that is attached to the phone while trying to replace the LCD without anti-static wrist strap).
Once the whole tilting part is freed from the phone, I would carefully push the whole screen (digitizer + lcd) out from the frame, again, they are glued to the frame but can be removed fairly easy.
That's it, the install is reversed of removal and hopefully yours will work again.
Like I said, I think I fried my flat ribbon so after replacing the Digitizer (it came in today), the touch screen still doesn't work, so now I'm looking for that part, I'd appreciate a link to it if anybody knows where to get one.
Oh, and for the parts, just do a search on ebay for "touch pro 2 lcd" or touch pro 2 lcd + digitizer"
Gook luck with your phone!
What tape to use to stick digitizer back to inner bezel/chassis?
Hi - i got as far as trying to replace my Digitizer only to find that the LCD was stuck to it too. So as clever as i am (not) - i tried to remove the LCD off the digitizer - but that just ended up cracking it.
So i'm in the process of ordering a LCD with the digitizer - pre-stuck together (i hope!) - but my question is:
When i removed the digitizer off the front bezel, there was this spongy sort of double sided tape... i assume it was used for a reason and not just any ordinary double sided tape (presumably to allow a bit of leway between the digitizer and the bezel when pressure is applied to the touch screen)...
Any thoughts on what sort of tape this is? - here's some photos of my digitizer and the bezel:
zedii.co.uk/DSC_0002.JPG
^some of that tape is left on the digitizer... it's the black spongy stuff...
zedii.co.uk/DSC_0003.JPG
^i cleaned (removed residue of sticky tape) in the inner part of the bezel where the digitizer would stick...
Any specific tape to use that anyone knows of?
zedii said:
Hi - i got as far as trying to replace my Digitizer only to find that the LCD was stuck to it too. So as clever as i am (not) - i tried to remove the LCD off the digitizer - but that just ended up cracking it.
So i'm in the process of ordering a LCD with the digitizer - pre-stuck together (i hope!) - but my question is:
When i removed the digitizer off the front bezel, there was this spongy sort of double sided tape... i assume it was used for a reason and not just any ordinary double sided tape (presumably to allow a bit of leway between the digitizer and the bezel when pressure is applied to the touch screen)...
Any thoughts on what sort of tape this is? - here's some photos of my digitizer and the bezel:
Any specific tape to use that anyone knows of?
Click to expand...
Click to collapse
I wish you had asked before you ordered the digitizer + LCD, since I ordered mine separately, and they seem to both working ok. The digitizer does not have to be glued to the LCD. But anyway, I just used plain old Gel superglue to glue the digitizer to the bezel. I used Gel superglue so it won't run into the electronics beneath. Things seems to work just fine now.
One thing to consider when you crack open the whole phone though. Be careful not to loose any part from within the phone, because apparently, I lost something, now my accelerometer doesn't work, and my screen doesn't rotate when you slide out the keyboard. Hope it works out for you!
adp9626 said:
I wish you had asked before you ordered the digitizer + LCD, since I ordered mine separately, and they seem to both working ok. The digitizer does not have to be glued to the LCD. But anyway, I just used plain old Gel superglue to glue the digitizer to the bezel. I used Gel superglue so it won't run into the electronics beneath. Things seems to work just fine now.
One thing to consider when you crack open the whole phone though. Be careful not to loose any part from within the phone, because apparently, I lost something, now my accelerometer doesn't work, and my screen doesn't rotate when you slide out the keyboard. Hope it works out for you!
Click to expand...
Click to collapse
Thanks for the advice adp9626! Well in summary I think I've just been messing about too much and being stupid really.
In the end, I managed to just remove the top part of the screen without actually having to break into the bottom section of the phone.
I was a bit concerned about the whole sticking of the LCD to the Digitizer part. I actually did purchase them separately, however I was not sure what kind of glue was used to stick them both together - as I recall it was a nightmare to try and remove the LCD off the old Digitizer.
So I returned both separate parts (got a full refund as I didn't use them) - and now I am looking to purchase both parts stuck together.
I'm waiting on the guy on eBay to confirm that they are both stuck together. I'm also thinking of using double sided sticky tape to stick the Digitizer back to the inner bezel...
So that's the final plan! I've been a bit silly in rushing with ordering parts etc. but I just want to be on the safe side now - well - at least with the LCD stuck to the Digitizer part.
I will take your advice on the gel superglue if the double sided sticky tape doesn't prove it's stickyness!
Thanks
Zayd.
Can anyone help me find the lcd screen and digitizer as a single unit for Sprint? Everyone I find states not for CDMA.
Thanks
Anyone ??? I spent an hour on google and still came up with no leads.
hyghlndr said:
Anyone ??? I spent an hour on google and still came up with no leads.
Click to expand...
Click to collapse
I ordered one from this guy and it works great. it comes with the entire top half of the phone and the keyboard. There is only one left so you may want to hurry. Link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=270583335455&Category=20336&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2
Edit: I wanted to add that they're are slightly used so there will be scratches. The one i received is a little more scratched than my original then again the scratches aren't noticeable when the back light is on and you're getting a working screen.
Just my experience, I had a faulty LCD, digitizer was OK. Bought a replacement LCD off ebay, delivered from China but only cost me £20 inc delivery. Arrived with tools as well (T5, T6, philiips, and pry tool). Followed a couple of disassembly instructions online, took me a while to get all apart but managed it. None of the instructions online go through actually taking the screen out, I thought I'd messed it up as I took the back half of the LCD off and left the front bit on, and I couldnt get it off at first. I ended up using a very sharp scalpel to slide between the LCD and digitizer and got them apart eventually, as I didnt realise that they were glued.
Anyway, I just placed the screen on, no glue as there is a ring of sticky tape around the back of the digitizer which holds the screen in. Connected everything back in the end and its working fine. Only prob is I think I damaged the power/standby button, so be careful when around this area.
Touch Screen not responding after replacement
Recently, I replaced a glass screen on a SGH-M919 Galaxy S4. Previously, during the process of cleaning the glue residues off the LCD screen; I rubbed it with rubbing alcohol and it removed a small streak of the adhesive glue off left side of LCD screen and bottom right corner. After installed the new glass screen, I noticed a few spots of the glass screen wasn't sticking onto the sticky layer. So it looked like it has big air bubble between the glass screen and LCD. And I could see the rubbed off streak on the LCD screen. Everything worked fine with the new glass screen, with the exception of seeing the streak and bottom right corner rubbed off.
A few days ago, I had a table clock fell on top of the phone and broke a piece of glass. Nothing happened to the LCD screen and still functional 100%. So I got a replacement glass screen - the same as the first time replacement. With noticing of the rubbed off streak and corner of the adhesive layer on the LCD screen - I decided to rub off all of the adhesive layer from the LCD. I sprayed some Goof Off liquid on the adhesive layer and left it over night. Next morning I continued scraping off the glue with a small plastic card. Cleaned off all glue residues and examined the LCD screen for any scratches or damage. There was none. Re-installed new glass screen - but now the touch screen does not respond to the touching on the icons. Only the Home, Menu & Back touch button work. I was baffled after this.
Could it be that because I left some the Goof Off liquid on top of the LCD screen over night and it might have leaked to the other side and shorted out something? I saw a few forums that suggested a Factory Reset. I did that - but still didn't work. Please advise on what I need to do to fix this problem.
Thank you in advance for the advise or suggestion.
So you know that these are the TP2 forums, and no one has used this thread in the last 3 years....right?
LCD digitizer replacement.. now black screen
I saw the for replacing the LCD-digitizer of my nexus 4 phone, and followed the steps carefully. After I placed the battery, I checked to see if the phone turns ON and the display is working before I complete the last step of putting the back coverplate. I successfully switched it ON, saw a perfectly working screen, and browsed through my apps. To complete the assembly, I put the back cover by gently pressing the frame along the edges, but suddenly I saw some yellow green lines in the middle of the screen. I switched it off and again switched in ON, but now the entire screen had light with no display.
To fix this, I tried again checking all connections but no luck. What could be the reason for the sudden loss of display when it worked perfectly fine moments ago? Is there a possibility that I damaged the LCD while putting the back cover on the phone?
I am also not sure about one of the ribbon connectors of the digitizer. There are 2 big ones which are prominent and has ports to connect. However, there is a little third one which also has to come through the gap but doesn’t connect anywhere. Has anyone also experienced this while replacing the screen? Any help will be appreciated.
I replaced my digitizer on my inc and now it will randomly have touches on the screen. I have no idea why this is happening. I have tried two different digitizers with the same problem. It gets worse, i have tried the first digitizer i got on a second phone and this phone has the same problem.
I am running cyanogenmod and have "show touch" turned on so i can tell when its happening and where. The random touches appear to happen all on there own. I can not reproduce them. They do generally happen in about the same spot/spots each time. There are two general areas and when its registers a touch it moves a little, meaning when it touches it self it dances around a little. how ever if i turn off the screen and turn it back on it usually fixes the issue for a while.
Any idea what may be causing this problem and how to fix it?
Funny, I am having the same exact problem. Replaced my digitizer about a month ago and routinely get the "random touches" or just general unresponsiveness while using my phone.
I just assumed it was a side effect of my less then perfect installation but now I wonder if the digitizer itself is shoddy.
freestylesno said:
when it touches it self it dances around a little.
Click to expand...
Click to collapse
Haha, excellent...
Have you considered the trackpad as the possible culprit? I know when my phone does similar things (swiping homescreens, moving the cursor when typing, etc) it's usually because the trackpad is dirty. I can't really think of why the digitizer (assuming it was properly replaced) would be causing that problem..
My buddy Bob had this happen to his Incredible too when he cracked his screen and had it replaced. He had it replaced 3x through Best Buy because each time it came back it would freak out like that. It turns out that something inside the phone was shorting out to the chassis, it would only happen when he squeezed/held the side of the phone. They ended up just giving him a new one after the third time.
brando56894 said:
My buddy Bob had this happen to his Incredible too when he cracked his screen and had it replaced. He had it replaced 3x through Best Buy because each time it came back it would freak out like that. It turns out that something inside the phone was shorting out to the chassis, it would only happen when he squeezed/held the side of the phone. They ended up just giving him a new one after the third time.
Click to expand...
Click to collapse
Yeah im thinking it could be something shorting but no real way to test. But after many take apart's i seem to have got the screen to a point where it does it like all the time rendering the phone useless. i have put back on the original screen and am seeing if there are problems there. (i got a new plastic housing)
k_nivesout said:
Haha, excellent...
Have you considered the trackpad as the possible culprit? I know when my phone does similar things (swiping homescreens, moving the cursor when typing, etc) it's usually because the trackpad is dirty. I can't really think of why the digitizer (assuming it was properly replaced) would be causing that problem..
Click to expand...
Click to collapse
Yeah i have disconnected the track pad and tried that with no change. and i tried disconnecting the light bar for a try and it would not boot. but i only tried once and i could have messed something else up when i put it back together.
i will report back with how the stock screen does and i'm thinking that will confirm that its the replacement digitizers .
Well the stock digitizer is doing the same thing. So its someting on the board, but i have tried it on two different phones.
So im up for trying just about any suggestion at this point. I have 2 phone and 3 digitizes doing this.
Mine does the same thing. I replaced just the screen awhile back.
I thought it might be related to maybe an upgraded screen family and the kernel not supporting it or something..
Like this post:
http://forum.xda-developers.com/showpost.php?p=15132827&postcount=3626
I usually take off the back and then pull the battery and snap the case back on. Seems to fix the problem until I mess with the battery again.
Anyone know how to see what touchscreen version you have?
ok so i have 3 phones(boards) 3 digitizers. 2 phones are the same hardware version i believe, one isn't. and all three experience this problem. This is even with swapping around the digitizers. I'm thinking that somehow all of these share something similar. All i can think of is me putting them together.
Any idea on what they share?
Just wondering if you ever fixed the problem or got it figured out to some extent?
Same thing is happening on my phone ever since I replaced the screen/digitizer. Took it back apart and cleaned all the ribbon connections and the problem is still there. Thinking it might be a grounding issue possibly since it seems like it goes away (most the time) after I vigorously squeeze the bottom of the phone, by the trackpad and capacitive buttons. But it invariably comes back, and seems to be worse when plugged in to the charger for whatever reason.
Also, since you've also taken apart and reassembled your phone, have you had an issue with the trackpad not sitting flush with the screen? No matter how I reassemble everything, it seems like my trackpad is recessed now and it's even worse when I use the little rubber gasket that was on there originally...
I haven't been able to determine what the problem is, but mine seems exactly like yours. When charging I pretty much can't use my phone random touches everywhere, or it doesn't fully reconize my touch. I just took my INC all the way apart and cleaned everything connections and all. I read somewhere it could be a dirty optical pad so cleaned that good too. Just powered on *Fingers Crossed*
odlay75 said:
I haven't been able to determine what the problem is, but mine seems exactly like yours. When charging I pretty much can't use my phone random touches everywhere, or it doesn't fully reconize my touch. I just took my INC all the way apart and cleaned everything connections and all. I read somewhere it could be a dirty optical pad so cleaned that good too. Just powered on *Fingers Crossed*
Click to expand...
Click to collapse
when you replaced it did you make sure you the ground straps where connected to the screw holes with nothing interfering? i pulled my LCD out of my screen on my dev phone because there was dust under the glass. after i put it all back together i was getting the same thing descried in the OP. so i took it apart and noticed that the thread lock used on the screws pealed off and on the ground straps. so i cleaned them up with Alcohol and a cotton swab. put it back together and haven't had it happen sense.
synisterwolf said:
when you replaced it did you make sure you the ground straps where connected to the screw holes with nothing interfering? i pulled my LCD out of my screen on my dev phone because there was dust under the glass. after i put it all back together i was getting the same thing descried in the OP. so i took it apart and noticed that the thread lock used on the screws pealed off and on the ground straps. so i cleaned them up with Alcohol and a cotton swab. put it back together and haven't had it happen sense.
Click to expand...
Click to collapse
When you say ground straps, are you referring to the two tiny screws that are near the top of the actual screen (after you've taken of the red battery compartment thing and the board)? I remember there being these little metal mesh strips that were in those screw holes that I think I promptly lost after taking the screws out..
k_nivesout said:
When you say ground straps, are you referring to the two tiny screws that are near the top of the actual screen (after you've taken of the red battery compartment thing and the board)? I remember there being these little metal mesh strips that were in those screw holes that I think I promptly lost after taking the screws out..
Click to expand...
Click to collapse
yes. after removing the board on the back of the LCD screen there are 2 straps on the top that ground the screen to the frame. the screws had blue thread lock on the bottom. sometimes it will come off when you remove them.
basically make the head of the screw is clean and the metal straps are clean to make a good enough ground.
EDIT:
if you lost the screws you can try to pick up an eye glass repair kit. the ones used for glasses. they have small phillip screws that might work. you can normally buy the kit at a $.99 store.
I was wondering what the screws were for since it didn't look like they were actually holding anything in.. I didn't lose the screws, just the grounding material, which were those metal mesh adhesive strips. Trying to think of what I may be able to replace that with, maybe just some aluminum foil or something? There has to be some better material, I'm just not thinking of it..
k_nivesout said:
I was wondering what the screws were for since it didn't look like they were actually holding anything in.. I didn't lose the screws, just the grounding material, which were those metal mesh adhesive strips. Trying to think of what I may be able to replace that with, maybe just some aluminum foil or something? There has to be some better material, I'm just not thinking of it..
Click to expand...
Click to collapse
the straps fell off? (the straps are on the back and should be soldered to the drivers on the rear of the screen) i wouldn't recommend aluminum foil. try going to a store like radio shack or any do it your self electronic store and see if the can sell you some fine wire mesh.
Hm, I think we must be thinking of different things, cause these were just tiny little pieces of wires mesh that those screws held into place that were stuck to the metal on the back of the screen. Might have to open it up again and snap a picture or two to clarify if I can't find any other grounding issues, etc.
k_nivesout said:
Hm, I think we must be thinking of different things, cause these were just tiny little pieces of wires mesh that those screws held into place that were stuck to the metal on the back of the screen. Might have to open it up again and snap a picture or two to clarify if I can't find any other grounding issues, etc.
Click to expand...
Click to collapse
yea thats what im talking about. the 2 straps on top that are screwed in. they need to have a clean connection from the strap to the screw heads that it sits on after screwing them down.
Well I'll be damned, I think that was it! I "borrowed" a little bit of that wire mesh stuff from the back of the screen (it's holding down the screen's ribbon connector and covering other things) and put the screws back in holding little strips of the mesh down and stuck to the metal on the back of the screen. I haven't been using my phone much but the phantom touches and vibration haven't come back, crossing my fingers that it stays this way!
Thanks again synisterwolf, mashed your thanks button a bit
To the OP: I'd highly recommend making sure the screen is grounded properly with those two tiny screws towards the top of the screen.
Thanks for the info guys! Does anyone have a pic of this mesh stuff. I think my old screen had it, but the new screen does not..
odlay75 said:
Thanks for the info guys! Does anyone have a pic of this mesh stuff. I think my old screen had it, but the new screen does not..
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=lr4uy9yKqIE
3:30 MARK is what we are talking about.
---------- Post added at 11:32 AM ---------- Previous post was at 11:32 AM ----------
k_nivesout said:
Well I'll be damned, I think that was it! I "borrowed" a little bit of that wire mesh stuff from the back of the screen (it's holding down the screen's ribbon connector and covering other things) and put the screws back in holding little strips of the mesh down and stuck to the metal on the back of the screen. I haven't been using my phone much but the phantom touches and vibration haven't come back, crossing my fingers that it stays this way!
Thanks again synisterwolf, mashed your thanks button a bit
To the OP: I'd highly recommend making sure the screen is grounded properly with those two tiny screws towards the top of the screen.
Click to expand...
Click to collapse
you are welcome. glad i could help and glad i took mine apart. now i can see how it all works. it was hard with my big hands but it was fun.
So I recently replaced both the lcd and the digitizer(bought separately from ebay).
I tested the phone every step of the reassembly, and everything was working fine until I put the whole thing inside the back cover. That was when the digitizer, for some reason(mainly that I didn't apply any additional glue), popped off.
And then I noticed that it won't work if I put it back in, but would work if I pull it up and away from the phone!
I have taken the whole thing apart, and while testing, I noticed that the digitizer won't work if it's on the lcd. I placed a piece of see-through plastic in between, and it is functional even when resting on the lcd. I could pull the plastic half way down the screen and it would still work but after that I can't be sure.
So what can I do, apart from ordering a new lcd/digitizer assembly? Can I place tape on the sides of the digitizer?
Thanks in advance
Alright so I have a simular problem right now. I think its the glue/adhesive isnt working properly. Try a heatgun or hair-dryer to heat up the screen enough to activate the adhesive and add weight to the glass until the glue dries.
Tw1tchy said:
Alright so I have a simular problem right now. I think its the glue/adhesive isnt working properly. Try a heatgun or hair-dryer to heat up the screen enough to activate the adhesive and add weight to the glass until the glue dries.
Click to expand...
Click to collapse
I don't see any adhesive on neither of them! But even if they were heat activated, how are you supposed to line them up? there are no edges or lines for the lcd's placement on the digitizer!
I would try putting them inside the chassis and do it then but I've put quite a lot of very strong glue on there and I'm pretty sure that they won't come off undamaged! So I need to be sure before I put them back in!
You try that and let me know how it turns out :fingers-crossed::fingers-crossed::fingers-crossed:
david_12121 said:
I don't see any adhesive on neither of them! But even if they were heat activated, how are you supposed to line them up? there are no edges or lines for the lcd's placement on the digitizer!
I would try putting them inside the chassis and do it then but I've put quite a lot of very strong glue on there and I'm pretty sure that they won't come off undamaged! So I need to be sure before I put them back in!
You try that and let me know how it turns out :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
You were supposed to apply adhesive strips to connect the digitizer to the LCD
http://www.amazon.com/Adhesive-Sticker-Digitizer-Supersonic-Incredible/dp/B004WIQW3U
Tw1tchy said:
You were supposed to apply adhesive strips to connect the digitizer to the LCD
Click to expand...
Click to collapse
The lcd doesn't have an edge to glue something to.
I put everything inside and it's working now! I have a contacting area in the middle of the screen but it is what it is.
The screen is functional and that's all I care about
Thanks anyway
David
david_12121 said:
The lcd doesn't have an edge to glue something to.
I put everything inside and it's working now! I have a contacting area in the middle of the screen but it is what it is.
The screen is functional and that's all I care about
Thanks anyway
David
Click to expand...
Click to collapse
I would recommend appling the adhesive stips. they are only 2mm wide so you can easily apply it to the bezel of the glass digitizer. If your LCD isnt sitting properly between the inner housing and the digitizer it could damage the actual LCD this time.
I dropped my 1gen N7 which cracked the screen and left it completely unresponsive to touch. I got a replacement screen digitizer LCD off Amazon and installed it myself. It works, but but most of what should be black is red, on half the screen most whites are teal, and there are ghosts/shadows under the keyboard letters and other random stuff. Did I likely get a bad lcd or could a damaged ribbon cause this? I'll try to get a video of it, but I don't know if it'll come out accurate. If it works I'll post a link to it.
72mino said:
I dropped my 1gen N7 which cracked the screen and left it completely unresponsive to touch. I got a replacement screen digitizer LCD off Amazon and installed it myself. It works, but but most of what should be black is red, on half the screen most whites are teal, and there are ghosts/shadows under the keyboard letters and other random stuff. Did I likely get a bad lcd or could a damaged ribbon cause this? I'll try to get a video of it, but I don't know if it'll come out accurate. If it works I'll post a link to it.
Click to expand...
Click to collapse
If you look closely at the lcd ribbon (amber, not silver), the end going to the motherboard has a snap-on connector. It has to snap straight top down; otherwise, it would bend the pins (most likely on the motherboard side), and that in turn will cause the kind of distortions you described. Look with a loupe of at least 10X and you will see if anything was damaged on both ends (ribbon and motherboard connectors). If you see pins that are just bent out of shape, you can try to bend them back, but be very gentle. Once they break, the whole motherboard would become unusable.
Also, the EMI tape covering the connector must be preserved and stuck to its metal top side. Without it, the tab would have all kinds of interferences.
graphdarnell said:
If you look closely at the lcd ribbon (amber, not silver), the end going to the motherboard has a snap-on connector. It has to snap straight top down; otherwise, it would bend the pins (most likely on the motherboard side), and that in turn will cause the kind of distortions you described. Look with a loupe of at least 10X and you will see if anything was damaged on both ends (ribbon and motherboard connectors). If you see pins that are just bent out of shape, you can try to bend them back, but be very gentle. Once they break, the whole motherboard would become unusable.
Also, the EMI tape covering the connector must be preserved and stuck to its metal top side. Without it, the tab would have all kinds of interferences.
Click to expand...
Click to collapse
Thank you very much for your help.
I'm guessing the emi tape was the silver piece of tape. That was the only thing I couldn't save. As soon as I peeled it off it rolled up and I couldn't get it unstuck from itself. Where could I get some, or is there anything I could substitute for it?
72mino said:
Thank you very much for your help.
I'm guessing the emi tape was the silver piece of tape. That was the only thing I couldn't save. As soon as I peeled it off it rolled up and I couldn't get it unstuck from itself. Where could I get some, or is there anything I could substitute for it?
Click to expand...
Click to collapse
If you're in the us, give me an address and I'll send you enough to replace the lost piece.