can anyone help me revive my Imate JAM, No GSM! I tried ROM upgrade to the latest version from clubimate ERROR 120:COUNTRY ID ERROR! Thankfully i run into this MaUpgradeUt_noID in this forum and was able to revive my unit , i thought i was home free. A week later No GSM again! Since then my JAM is just a PDA, all works fine except the phone. If i run the upgrade utility it stops at radio stack. I tried upgrading without the radio stack( remove the radio stack file from the folder which contains all the upgrade files) it succeeds..well not really i still have no radio rom installed. Is it end of the road for my device? HELP! Please...
hi guys can anyone help? i have downloaded the german rom and want to update it to my uk orbit but found all the setup instructions are in german. can anyone post a translation or better still a bullet pointed how to guide how to install from fresh (i have an unlocked orbit) and what to check or look out for etc etc. also is the rom fully ok or are there bugs still?
its very basic - check the marks on the boxes so you can proceed to the next screens
*tip*
Abbrechen = Cancel
Weiter = Next
Zurück = Back
Sorry, but I think it doesn't make sense to You, to update to a German rom version, if You're not able to understand the german setup instruction, cause in that version all menus and help functions are in German too.
I agree with kinski
But to answer all your question, i haven't found any bugs in this ROM, for me its just perfect!
i thought that after upgrading to the german rom you could select language to english thus bieng able to use it on a uk orbit? or am i wrong
patel989 said:
i thought that after upgrading to the german rom you could select language to english thus bieng able to use it on a uk orbit? or am i wrong
Click to expand...
Click to collapse
A bit more complicated than that. Read this thread and you will know exactly what to do, it may seem long, but anyone on this board will tell you it is 100% worth it to read....
http://forum.xda-developers.com/showthread.php?t=308164
..... and have a look at this
http://forum.xda-developers.com/showthread.php?p=1324096#post1324096
didnt work gets to 3% and says it failed and reboots phone back to origional wm5?
patel989 said:
didnt work gets to 3% and says it failed and reboots phone back to origional wm5?
Click to expand...
Click to collapse
Then your phone is one in a million because everyone else managed to either upgrade or break thier phone with these upgrades. Did you make sure your phone was CID Unlocked first?
phone is unlocked with origional wm5 software running.
1 downloaded the german wm6 update rom form german 02 site http://www.o2online.de/nw/support/do...bit/index.html
2 using winrar i extracted the german rom
3 downloaded bepe's ART WWE WM6 and renamed the artemis_wm6_bepe_WWE.nbh file TO RUU_signed.nbh
4 put that fule into the german rom update folder writing over the old one
5 started orbit in booteloader both buttons and reset pressed once
6 ran ROMupdateUtility.exe from the german update folder i had extracted earlier
7 started updating but noticed when i the pc started loading the files and the phone showed a status bar that when getting to 3% would stop and reboot the phone back to origional wm5. and on the pc it would say error 270 (i think) update failure ?
did everything as i should but no joy.
patel989 said:
phone is unlocked with origional wm5 software running.
1 downloaded the german wm6 update rom form german 02 site http://www.o2online.de/nw/support/do...bit/index.html
2 using winrar i extracted the german rom
3 downloaded bepe's ART WWE WM6 and renamed the artemis_wm6_bepe_WWE.nbh file TO RUU_signed.nbh
4 put that fule into the german rom update folder writing over the old one
5 started orbit in booteloader both buttons and reset pressed once
6 ran ROMupdateUtility.exe from the german update folder i had extracted earlier
7 started updating but noticed when i the pc started loading the files and the phone showed a status bar that when getting to 3% would stop and reboot the phone back to origional wm5. and on the pc it would say error 270 (i think) update failure ?
did everything as i should but no joy.
Click to expand...
Click to collapse
Run USPL unlock cid ( SPL 1.11 ) by Pof
And try again..!
exactly, do a search on CID unlock - a whole new level of unlocking that it does not sound like you are familiar with. Do this and your problems will go away.
I have just downloaded HTC german WM6.0 ROM and are slightly disappointed. No touch (of course), no additional applications like HTC task manager, nor phonepad.
So I tried to simply reinstall Meschles WM6 2.0 full release and was prompted that all of a sudden the image got corrupted.
Does anybody have an idea what happened ?
Did you run step 1 - your phone needs uspl cid unlocking again.
If you still have trouble you may need to downgrade to wm5 first.
Hi!
I've an Artemis (o2 germany-software) and i already updated it to WM5 a year ago. Now my friend bought the new artemis with WM6 on it and with that cube and everything (with the o2 branding). So i wanted to get WM6 and saw it on the o2 homepage as a free update just like WM5 update the year before. So i tried to update and a comunication error 302 appeared at 51%. After the restart only the bootloader worked. then i found out that it's possible to load the update on a fat32 formated sd-card and it worked but the hardware reset wasn't possible out of the bootloader in which it switched back every time. So i took any cooked rom for my device, tried to update and it interrupted after 3%. When i now restarted my Artemis it worked perfekt with the o2 branded WM6 soft. But that soft looked so different to my friends one. So i used the USPL update to unlock my CID and choose any rom for my device. it failed. so i had to use the original rom and another rom to get it working again. then i choose the next new rom for Artemis....
I've tried it at least 30 times now with a different Rom every time and i'm close to a complete nervous breakdown. Does anyone have an idea what i could do to get WM6 with cube?
Its simple heres the link for wm 6.1 with cube - http://forum.xda-developers.com/showthread.php?t=371182
make sure you run the tool to cid unlock firtst though.
I already tried that one. it failed at 85% with update error 302
oh man!!!!! it worked!!!!! I don't know how but the full version with cube worked!
I'm so happy! Who made that Rom?
Hi there,
So I use Sygic for about 5 years and I never had that problem before. When I open the app, Sygic say me that he can't run because the maps are on the sd card and not on the internal memory. I don't why I can't run Sygic and I try to move only the map of Belgium (cause I live there ), the app boot but I need all the Europe and I want to know if somebody found a solution for this problem or have this problem.
I have the HTC One M8 with ViperOne M8 5.0.0 S-On with the last firmware.
Thanks and have a nice day