Related
On a universal or any other hacked device with a2dp you need to go into the registry and add this dword string into the following location. HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Make a new Dword value and name is Priority256 and then for the DWORD Data value make that 60 save and reboot. Presto no more lag, cuts or audio drop outs. I have attached the modified registry key for ease. To manually mod it the registry location is at the following.
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd
Update: If you run wisbar advanced you need to manually launch it. If you have it start up at boot it will cause lagging issues as well. So just disable wisbar advanced from startup and you are cookin.
Mike
Well done!
P.s. 60 in HEX or Decimal?
also.. I do not see the Priority256 registry key entered in the .Reg file you uploaded. (?)
Its in decimal and you have to login to see it.
What I meant is that the contents of the .Reg file within the .Rar file attached are as follows :
[ H K E Y _ L O C A L _ M A C H I N E \ D r i v e r s \ B u i l t I n \ B t A 2 d p S n d ]
" F l a g s " = d w o r d : 0 0 0 1 0 0 0 2
" I n d e x " = d w o r d : 0 0 0 0 0 0 0 8
" O r d e r " = d w o r d : 0 0 0 0 0 0 0 8
" P r e f i x " = " W A V "
" D l l " = " b t a 2 d p . d l l "
---
they don't seem to contain the magic Priority256 key.
My apologies for not explaining properly.
There is too simple to be truth.
Does not work on Wizard 2.8.7.1 WWE
I found that re encoding things into WMA 9 fixed a lot of problems too. I use a2dp on my Magician a lot so I'll know if it works =P
EDIT:
That key wasn't there before I applied the reg fix. Also, I do not have a file called bta2dp.dll on my Magician.
Do you know what you're doing? ;D
This has been done on a universal running the Qtek 1.30.77 rom. So possibly there are different bluetooth radios between the universal, wizard, magician
Mike
Hey... do any of you guys want to grab a couple of .dll files from your phone and post them? I've tried extracting them from ROMs, but they're always corrupt... I need:
bta2dp.dll
and
Avrcp_MPplugin.dll
I'm not sure if the builtin file manager will let you just copy them out though, so you may have to get creative... Thanks!
-Taylor
You're absolutely right.....
Mikee4fun,
Thanks for this. I upgraded my JasJar to the Qtek ROM and just got a set of BT headphones that support both a2dp and AVRCP (it's the GlobalSat Wireless Entertainment Package - Bluetooth Headset and Transmitter (BTH-820 plus BTA-830)).
When I paired the headset with my JasJar, the playback was all screwed up! I applied your hack and now it works beautifully. AVRCP is working great too. Thanks for your help.
Justin
RE
Thanks
Works on my QTEK 9000 and iPhono mini 450Rx nicely otherwise I'm getting this split-second lag periodically upon playing song
either my bluetooth headphones are messed up or it's the ROM that's messed up, but this "hack" does not work on the Wizard with the leaked Qtek ROM. I'm using the HT820 headphones and am getting severe lagging throughout the song. i really don't know what to do now, they were working great last night and even this morning, now it's unbearable
Can someone do me a HUGE favor? I'm trying to get the X-Scale AKU2 AD2P files for the Treo 700w. From my quick reading of the rom decrypting threads, I need a HTC Uni device to compare the "merged" data from the update + original rom...which I only have a Treo 700w.
I need the following files: Avrcp_MPplugin.dll, bta2dp.dll, sbc.dll
The theory I'm testing is by using the Intel X-Scale compiled files instead of the OMAP compiled files floating out there (it appears the file sizes are different on each platform), the Treo 700w will be able to play files without skipping. A poster on pdaphonehome.com suggested this discrepancy.
FYI - I have already tried the AD2P lag patch thread priority patch to no avail.
John
PS - Please reply to Operation A2DP thread
http://forum.xda-developers.com/viewtopic.php?t=43992&start=150
eman said:
What I meant is that the contents of the .Reg file within the .Rar file attached are as follows :
[ H K E Y _ L O C A L _ M A C H I N E \ D r i v e r s \ B u i l t I n \ B t A 2 d p S n d ]
" F l a g s " = d w o r d : 0 0 0 1 0 0 0 2
" I n d e x " = d w o r d : 0 0 0 0 0 0 0 8
" O r d e r " = d w o r d : 0 0 0 0 0 0 0 8
" P r e f i x " = " W A V "
" D l l " = " b t a 2 d p . d l l "
---
they don't seem to contain the magic Priority256 key.
My apologies for not explaining properly.
Click to expand...
Click to collapse
i'm wondering what the answer is to this? seems like the registry import is different from the instructions provided...which should we do, the registry import or ignore it and follow your instructions?
thanks,
-jeff
What I would do...
If I were you, I'd manually enter the information. That's what I did.
thanks - i've been wondering whether the people who've had success with this are doing one method (apparently manual) while others are having no success because they are using the registry import file.
-jeff
works (sort of) on an sda
I did the mod by hand and it fixed the lag problem for wmp with a T-Mobile SDA (US) (with no ROM upgrades) paired with Motorola HT820. The lag is still there oddly in some other audio programs.
BTW, I only get the lag with the hands free profile. If I use the headset profile, no lag at all, but I lose some handy features on the Moto.
Is this applicable to the Axim X51V as well?
Thanks.
Hi,
would this work for windows mobile 2003se?
(on a magican)
thanks
Lag fixed on SDA
Manual modification of registry using Mobile Regitry Editor.
http://www.breaksoft.com/Blog/Utilities/2005/1/Mobile_Registry_Editor.aspx
Thanks guys. This was getting on my nerves. I was having to cold boot to fix the dropouts. Now let's find a fix for the slight hiss. Then, all will be wonderful.
I am using the Qtek 9000 with Rom version 1.30.77wwe (with radio 1.09 and extrom 1.30.176) and I have big lag issues in combination witha Jabra 620s headset.
Above solution didn't solve the problem. Does anyone has an idea?
When I run de Getdevicedata, the devidedata.txt show's this:
P H 2 0 B W W E AT%CID? 5 . 0 3 . 0 2 1.02.00 % 4
I don't upgrade anythig, always show the same countryID error, and i can't change the code, because i don't know why?
jist said:
When I run de Getdevicedata, the devidedata.txt show's this:
P H 2 0 B W W E AT%CID? 5 . 0 3 . 0 2 1.02.00 % 4
I don't upgrade anythig, always show the same countryID error, and i can't change the code, because i don't know why?
Click to expand...
Click to collapse
try to used noid.exe you will be fine
HI,
When I do the upgrade with maupgradeut_noid_171, the device to be disconected after to detect the actual firm and I pres update.
Please help me.
extract the contents of the upgrade you want to use, then copy maupgradeut_noid to the folder in which you extracted the files and run maupgradeut_noid instead baupgradeut and it will upgrade all fine
and be sure to take out your SD card because it will hang the update utility
I know XT9 has been a subject of many posts but...
I owe i-mate ultimate 8150. It does have XT9 as default - It's good.
Now...Because I'm polish - I wanted to add polish language to it.
I found the ldb and kdb files and just added them to the registry just like other languages that were already there.Unfortunately the phone doesn't switch to this language.
I modyfied/Added the following keys:
[ H K E Y _ L O C A L _ M A C H I N E \ S o f t w a r e \ T e g i c \ e T 9 \ I M E \ K D b F i l e s ]
" 0 6 1 5 " = " p l h p d . k d b "
[ H K E Y _ L O C A L _ M A C H I N E \ S o f t w a r e \ T e g i c \ e T 9 \ L d b F i l e s ]
" 0 1 1 5 " = " P L l s U N _ x t 9 . l d b "
[ H K E Y _ L O C A L _ M A C H I N E \ S o f t w a r e \ T e g i c \ e T 9 ]
" A v a i l a b l e L a n g u a g e s " = " 0 1 0 9 , 0 1 0 C , 0 1 1 0 , 0 1 0 7 , 0 1 0 A , 0 1 1 6 , 0 1 1 9 , 0 1 1 5 "
Everything just like other instructions on the net say although With 8150's XT9 - the registry for tegic files look a little bit different. - There is no mappings key and kdb files are binary - not text files.
I even tried to just add test Polish lang by copying english ldb and kdb into new (PLIsUN_xt9 and polish) filenames - no joy.
I'm beginning to think that XT9 on i-mate is specifically compiled and can only serve languages included by default.
So I thought I could get the T9 files from somebody else and replace the defaults.
xt9 on i-mate ultimate 8150 is installed from extended rom right after first turn on/restoring to factory settings.
Unfortunetly I couldn't find any cab that would include all necessary files.
So my questions is...Could someone please provide the files of XT9 - for let say HTC phone or maybe ASUS (including eT9ime.dll and impie.dll) as ZIP or CAB?
I know that going this route i'm gonna have to create the keyboard mappings for ultimate 8150 but I'm willing to do that as long as I know Polish ldb and other can work on this platform.
Alternatively - Has any one manged to successfully add non default language to his/hers i-mate ultimate 8150 ?
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\Bitmaps]
"0909"="eT9.SQR.English.bmp"
"090C"="eT9.SQR.French.bmp"
"0907"="eT9.SQR.German.bmp"
"0910"="eT9.SQR.Italian.bmp"
"090A"="eT9.SQR.Spanish.bmp"
"0919"="eT9.SQR.Russian.bmp"
"01FF"="eT9.SQR.Accented.bmp"
"04FF"="eT9.SQR.Symbol.bmp"
"02FF"="eT9.SQR.Emoticon.bmp"
"091D"="eT9.SQR.English.bmp"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\KdbFiles]
"0909"="eT9.SQR.English.kdb"
"090C"="eT9.SQR.French.kdb"
"0907"="eT9.SQR.German.kdb"
"0910"="eT9.SQR.Italian.kdb"
"090A"="eT9.SQR.Spanish.kdb"
"0919"="eT9.SQR.Russian.kdb"
"091D"="eT9.SQR.Swedish.kdb"
"01FF"="eT9.SQR.Accented.kdb"
"04FF"="eT9.SQR.Symbol.kdb"
"02FF"="eT9.SQR.Emoticon.kdb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyboardIDMapping]
"0109"="0909"
"010C"="090C"
"0107"="0907"
"0110"="0910"
"010A"="090A"
"0119"="0919"
"011D"="091D"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KdbFiles]
"0609"="enhpd.kdb"
"060C"="frhpd.kdb"
"0607"="dehpd.kdb"
"0610"="ithpd.kdb"
"060A"="eshpd.kdb"
"0619"="ruhpd.kdb"
"061D"="svhpd.kdb"
"07FF"="eT9.HQD.kdb"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010419]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e001040C]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010407]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010410]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e001040A]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e001041D]
"Layout Text"="eT9 IME"
"Ime File"="\\windows\\eT9ime.dll"
"Keyboard Layout"="00000409"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip]
"DefaultInputModule"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME]
"DefaultInputModule"=dword:00000001
"KeyboadLayout"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles]
"0109"="ENlbUN_xt9s.ldb"
"010C"="FRlsUN_xt9s.ldb"
"0107"="DElsUN_xt9.ldb"
"0110"="ITlsUN.ldb"
"010A"="ESlsUN.ldb"
"0119"="RUlsUN_xt9.ldb"
"011D"="SVlsUN.ldb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\InputModuleDlls]
"1"="eT9DisInput.dll"
"0"="eT9RegInput.dll"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\IsSIPInputMethod]
@="1"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\InprocServer32]
@="\\Windows\\eT9Sip.dll"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\DefaultIcon]
@="\\Windows\\eT9Sip.dll"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
"PasswordTimeout"=dword:000002ee
"ResetDB"=dword:00000000
"SpellCorrectionMode"=dword:00000000
"Prediction"=dword:00000001
"AutoAppend"=dword:00000001
"AutoSubstitution"=dword:00000000
"WordCompletion"=dword:00000001
"MultitapWordCompletion"=dword:00000001
"DefaultLanguage"=dword:00000109
"AvailableLanguages"="0109,0119,010C,0107,0110,010A,011D"
"InstallFolder"="\\Windows"
"CustomClassNames"=multi_sz:"WCE_EDIT","JBED_TEXTFIELD","ALT:sbedit","WMOpera_EditEx","TJEDIT","nEdit","Opera_MainWndClass"
[HKEY_CLASSES_ROOT\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}]
"Desc"="XT9"
@="XT9"
[HKEY_LOCAL_MACHINE\SOFTWARE\ASUS\ControlPanel\eT9Settings]
"CMD"=""
"EXE"="\\Windows\\xT9Settings.exe"
"Group"=dword:00000001
"AutoMode"=dword:00000000
"DisplayName"="eT9 Settings"
fuul registry xT9 asus P526 but Polish no
eT9
Thanks.
I made some little progress with this issue.
It's still not what I need but better than nothing.
I have eT9 files from some HTC - so I replaced eT9ime.dll and others what resulted in being able to choose polish language from list of available langs. Could not choose others though .
Polish language worked but only with ldb file for qwerty keyboard so writing on the num pad keyboard was impossible - but hey - eT9 worked .
I had 12 key ldb from the same package I had the qwerty keyboard ldb but this file didn't work - only numbers.
At the moment I'm thinking of installing old T9 taken from asus p525 to check...as xT9 doesn't seem to work.
But hey - If anyone see some fundamental errors in my approach to get xT9 on this i-mate ultimate 8150 or has successfully installed other than default language on it - give me a shout by leaving a note here please .
Hi !
I'm a new french member !
I've got a problem with my Asus P527 and the XT9.
I can't use the T9, it's only typing numbers and I can't use the mode "abc" or "symbols". When I press the "*" touch, it doesn't change anything ...
I asked the Asus hotline, they told me to send them...
Is there any solution ?
I tried to modify the registry base and it doesn't work either ...
Thanks for your replies !...
xT9
If you get just the numbers - you screw something up.
Just do the FACTORY SETTINGS from Settings menu and you should get you xT9 back.
REMEMBER to backup all you apps and contacts before you do that as you will WIPE the device with factory settings program !
Thanks for your answer a.key !
I tried to reset to Factory Settings and right before reseting, the system ask to type "1234" and the t9 worked à that moment (in "abc" mode)!!! ...
But even with the factory settings, I can't use the T9 with SMS, notes, etc...
Do you have any idea of what could make it works?...
Now I can use the T9 in "abc" mode or in "symbols" mode but not in predictive mode ...
I've got another question : Is there any update wm6.1 in french version for the Asus P527 ?...
Default mode "abc":
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME]
"CarrierDefaultTextMode"=dword:00000000
Default mode "XT9":
"CarrierDefaultTextMode"=dword:00000001
FIRST READ THE WIKI - HARD SPL - SUPER CID UNLOCK - THEN FLASH
GSM only Or u can end up with THIS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i moved from UK to CZECH and my connection for now only internetsharing from my Diamond hope to get better when get job
i have HARD spl 1.40
device MDA T-MOBILE
SUPER CID security unlocked
RADIO 1.14.25.55 XPERIA
RADIO 1.13.25.24 DIAM
after flashing and initializing display do a hard reset volDN+OK softreset
Click to drink
beer with me
KITCHEN RESOURCES
FULL KITCHEN's
Česká TF3D 21051 ZDE
a 6.5 23047 65 tady
Originally Posted by Da_G View Post
6.5 is already final (21234) and we've gone through.. 6.5.0.1, 6.5.0.20, 6.5.0.40 we're working on 6.5.0.50 right now, which is now final with 21820 At the very least we'll make it to 6.5.1 before WM7, but I expect it to go beyond that too
Let's see if I can recall the build naming convention...
212xx = AKU1, all builds leading up to and including WM 6.5
213xx = MOT motorola
214xx = forget
215xx = SAM samsung
216xx = HTC htc
217xx = COM1, continuing dev of 6.5.0.1 - 6.5.0.40
218xx = COM2, continuing dev of 6.5.0.50
219xx = MD, feature branch (unstable features are added here, backported to 218xx (this tree is based on COM1, so older base os code, but the UX code is newer [user experience])
CE Version 5.2.3860 (I don't believe this is accurate as the os code seems newer than this, it is probably only a bit behind 23004 in reality) - Dated July 7, 2009 - Build 5.2.21921.5.0.40
22xxx = SEMC sony ericsson
2300x = COM3, 6.5.0.60
234xx = COM4 6.5.1
almost all of the oem branches are based off 21234 (iirc SAM was based off an older build than that) - the oem's requested their modifications, and msft did them, incremented build number - some of these trees have stopped receiving modifications already.
For most of you, for the moment, 218xx is the branch to follow (but they might change the number now that COM2 is done as of 21820)
Most of the current focus is on UX as the backend code is mostly at the goal, so we should be seeing some nice changes to the theming api's etc. that will allow us much more modification of the UI (iirc the end goal is complete skinnability and finger friendliness - nothing left over from the old 6.1 interface that used a stylus, essentially)
They might be bandying about the idea of licensing resco keyboard to replace the stock non-finger-friendly keyboard.
Also, an interesting tidbit, any device that has a dpad and IE6 is *required* to have support in the display driver for a mouse pointer, and support in the dpad driver for a mouse pointer, to allow for things like javascript mouseovers that pull drop-down menus
Click to expand...
Click to collapse
Links all here
Code:
23069 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 1 1 3 ) ( O c t 8 2 0 0 9 1 5 : 5 0 : 4 1 )
21869 5.0.82
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 3 8 0 4 ) ( O c t 8 2 0 0 9 2 1 : 3 8 : 5 7 )
21867 5.0.68
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 3 8 0 2 ) ( O c t 2 2 0 0 9 2 1 : 0 0 : 4 6 )
23064 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 1 0 9 ) ( O c t 1 2 0 0 9 1 5 : 5 0 : 3 3 )
23063 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 1 0 8 ) ( S e p 3 0 2 0 0 9 1 5 : 5 0 : 0 1 )
23420 5.4.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 4 6 2 ) ( S e p 2 7 2 0 0 9 1 7 : 2 3 : 3 9 )
23060 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 1 0 5 ) ( S e p 2 7 2 0 0 9 1 7 : 1 6 : 5 7 )
21864 5.0.81
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 3 7 9 9 ) ( S e p 2 5 2 0 0 9 2 0 : 3 8 : 0 4 )
21859 5,0,81
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 3 7 9 5 ) ( S e p 1 9 2 0 0 9 1 4 : 0 8 : 3 9 )
23053 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 0 9 9 ) ( S e p 1 6 2 0 0 9 1 5 : 5 1 : 1 8 )
21857 5.0.66
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 3 7 9 3 ) ( S e p 1 6 2 0 0 9 1 9 : 1 0 : 2 0 )
23052 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 0 9 8 ) ( S e p 1 5 2 0 0 9 1 5 : 5 1 : 1 8 )
21951 info from dump
"Aku"=".5.3.0"
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 3 8 8 0 ) ( S e p 1 4 2 0 0 9 1 5 : 5 1 : 2 2 )
23049 5,3,0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 0 9 6 ) ( S e p 1 0 2 0 0 9 1 5 : 5 0 : 2 9 )
23047 5,3,0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 0 9 4 ) ( S e p 8 2 0 0 9 1 5 : 5 0 : 3 8 )
23609 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 5 5 6 ) ( S e p 7 2 0 0 9 1 5 : 5 5 : 1 9 )
23412 5.4.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 4 5 8 ) ( S e p 3 2 0 0 9 1 5 : 5 5 : 3 6 )
23409 5,4,0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 4 5 7 ) ( S e p 1 2 0 0 9 1 5 : 5 4 : 4 5 )
23601 5.3.0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 5 5 1 ) ( A u g 1 2 2 0 0 9 1 6 : 2 6 : 1 1 )
23028 5,3,0
M a j o r v e r s i o n ( 0 x 0 0 0 5 )
M i n o r v e r s i o n ( 0 x 0 0 0 2 )
B u i l d ( 4 0 7 5 ) ( A u g 1 2 2 0 0 9 1 5 : 4 3 : 5 1 )
23017
Build Info: CE Version 5.2.4065
Dated at : July 28, 2009 15:56:58
AKU 5.3.0
21935
Build Info: CE Version 5.2.3872
Dated at : July 27, 2009 15:57:34
AKU 5.0.60
23016
Build Info: CE Version 5.2.4064
Dated at : July 27, 2009 15:57:12
AKU 5.3.0
21932
Build Info: CE Version 5.2.3869
Dated at : July 22, 2009 15:58:13
AKU 5.0.60
23009
Build Info: CE Version 5.2.4058
Dated at : July 16, 2009 15:57:16
AKU 5.3.0
23008
Build Info: CE Version 5.2.4057
Dated at : July 14, 2009
AKU 5.3.0
21928
Build Info: CE Version 5.2.3865
Dated at : July 14, 2009 15:58:04
AKU 5.0.60
23007
Build Info: CE Version 5.2.4056
Dated at : July 9, 2009 15:57:12
AKU 5.3.0
21925
Build Info: CE Version 5.2.3864
Dated at : July 13, 2009 15:57:32
AKU 5.0.60
21921
Build Info: CE Version 5.2.3860
Dated at : July 7, 2009 15:57:58
AKU 5.0.40
23004
Build Info: CE Version 5.2.4054
Dated at : July 5, 2009 15:54:15
AKU 5.3.0
23003
Build Info: CE Version 5.2.4053
Dated at : Jun 30, 2009 15:57:03
AKU 5.0.60
23001
Build Info: CE Version 5.2.4051
Dated at : Jun 25 , 2009 15:55:06
AKU 5.0.60
DIAM GSM all
Diamond ROMS 6.5
Diamond ROM 21828 6.5 STABLE
NATIVE NK 65 ROMS 23420 0409_7
NATIVE NK 65 ROMS 23420 0405
CAB's 0405
23017 ROM
22001 ROM 2.10 DRIVERS
YOUTUBE
21806 rom 6-june-2009
21728 rom 3-june-2009
THANX
thanx goes to | BEPE | ervius | Cmonex | OLIPRO | tadzio ,,,,,,,,,,,,,,,,,,
XDA
donate here if u can
Thanx Anryl for fantastic rom. You cook now for diamond. It's great to see here.
Did you add EzInput from Topaz/Rhodium and is it multi-language?
The rom looks great in the video and it's nice to have another cook for our Diamonds!
Pls could you put a link other than rapidshare on... it keeps telling me i'm downloading a file...
Another Chef in Diamond Roms nice
Any feedback from this ROM, can I see any screen shots please??
Cumps
another chef, very good
anhTS said:
Thanx Anryl for fantastic rom. You cook now for diamond. It's great to see here.
Click to expand...
Click to collapse
thnx
pauldgroot said:
Did you add EzInput from Topaz/Rhodium and is it multi-language?
The rom looks great in the video and it's nice to have another cook for our Diamonds!
Click to expand...
Click to collapse
dont know check out code by link
thnx
Cornelius_ said:
Pls could you put a link other than rapidshare on... it keeps telling me i'm downloading a file...
Click to expand...
Click to collapse
working on sendspace 20min ETA EDIT: ADDED
akil3x said:
Another Chef in Diamond Roms nice
Any feedback from this ROM, can I see any screen shots please??
Cumps
Click to expand...
Click to collapse
youtube isn't enough ? flash and post screenshots
fabius88 said:
another chef, very good
Click to expand...
Click to collapse
thnx
Sorry for my blindness , just see now you tube :S
Thanks and sorry for inconvenient
Congratulations on releasing your first diamond rom, looks great. Thanks for posting up your modded XIP and batch file under my thread they work a treat.
rev2
lobsterdave said:
Congratulations on releasing your first diamond rom, looks great. Thanks for posting up your modded XIP and batch file under my thread they work a treat.
Click to expand...
Click to collapse
thnx hope to contribute more later
btw rev2 released few minor updates
welcome
nice to see another chef here....
all the best with your rom here.
if you need me...im just a pm away
21806
tested whole night no issues found so link UP
enjoy 21806
youtube uploaded should be up any min.
TY
Hello ROM
Seems a great Rom , gone download to try it!
Thanks Chef anryl
I had a problem during the joreny of the rom.
I cannot make any call with the dialar, and the usage of this rom is quite great.
Anyway, this is a great work!
Bye, rubbish.guy
rubbish.guy said:
I had a problem during the joreny of the rom.
I cannot make any call with the dialar, and the usage of this rom is quite great.
Anyway, this is a great work!
Bye, rubbish.guy
Click to expand...
Click to collapse
the dialer its not fully working yet no time but u can make calls with it just the green button is not working
no time to translate it fully yet
btw kitchen resources updated post 1
TY
Can i use your rom on Kaiser? It looks very nice i like it. And last question WM 6.5 works better on Diamond or Kaiser?
Thx
kaiser_noob said:
can i use your rom on kaiser? It looks very nice i like it. And last question wm 6.5 works better on diamond or kaiser?
Thx
Click to expand...
Click to collapse
kaiser rom only on kaiser
diamond rom only on diamond
so no
Hi i currently using HTC Trinity p3600i(black) as my pda. I frequently search for useful software but that habit is causing me more problem because i'm a newbies and stil learning in this forum & PDA world.
My PDA won't connect when my 3G simcard voice & data provider(Maxis).
I downloaded anvanced configuration tools & Resco Explorer Spb Suite(comes in pack with encryptor). What happen is, I had to hard reset my device cos it has gone haywired & hanged ( using ctrl+alt+del 3button push ) last week.
After that, I can't connect to any data connection whatsoever & it keep saying "the remote party has ended this connection". But however unlikely, when i use another ISP simcard (Celcom ) it worked just fine. Please help & advise me what to do. I'm totally blurred.
-My current ROM & Device Information-
About-Windows Mobile R 6 Professional
CE OS 5.2.1437 ( BUILD 17944.0.3.1 )
Processor : SC32442B-500MHz
Memory : 49.22 MB
Device Info
ROM VERSION : 3.00.707.17
ROM DATE : 06/29/07
RADIO VERSION : 1.46.00.11
PROTOCOL VERSION : 32.79.7020.19H
CPU : SAMSUNG (R) 2442
SPEED : 500MHz
RAM : 64MB
FLASH : 256 MB
DATA BUS : 32 BITS
STORAGE SIZE : 179.14MB
DISPLAY : 240 X 320
COLORS : 65536
TO ALL THE SIFU HERE, PLEASE HELP ME. PLS