For those with bricked devices without the orgininal factory ROM available, I would like to ask everyone to create a way of flashing USPL / CID unlocking from bootloader mode. Can anyone help me???
Kind regards,
JK Veldink
ps. I have the Atemis, T-mobile MDA Compact III, dutch edition....
If you can still get into bootloader mode you can flash it with the T-Mobile English rom. You can get i at the Wiki of the Armetis.
I used that rom when i had some bad flashes in WM5 editions. I dont know is you can downgrade from WM6 back to WM5.
I also have a dutch T-Mobile MDA compact running at BB3.7.
bullseye said:
If you can still get into bootloader mode you can flash it with the T-Mobile English rom. You can get i at the Wiki of the Armetis.
I used that rom when i had some bad flashes in WM5 editions. I dont know is you can downgrade from WM6 back to WM5.
I also have a dutch T-Mobile MDA compact running at BB3.7.
Click to expand...
Click to collapse
Tried that, but it keeps failing at 3%...and giving an error 'invalid vendor id'... That's why I think I have to CID unlock again....
But I need to have a tool that makes it possible to CID unlock from bootloader.... help me!!!!
Same problem, did anyone get this resolved?
jkveldink said:
Tried that, but it keeps failing at 3%...and giving an error 'invalid vendor id'... That's why I think I have to CID unlock again....
But I need to have a tool that makes it possible to CID unlock from bootloader.... help me!!!!
Click to expand...
Click to collapse
What version is your bootloader at the moment? (IPL/SPL)
I had version 3.5.0 or something and could not load any rom onto the device, if so your only option is this: http://forum.xda-developers.com/showthread.php?t=290241
Flash a rom with a lower IPL/SPL preferably 3.04 version and then run Pofs USPL!
Good luck!
My elf0100 has :
IPL 1.11.002
SPL 1.11.0000
But cannot upload any of the rom's I tried (about 30 different including the so-called original once).
WM6 from T-mobile
Hi guys,
did you also try: http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iii-mobile-6.aspx ?
Regards,
mytrinity
mytrinity said:
Hi guys,
did you also try: http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iii-mobile-6.aspx ?
Regards,
mytrinity
Click to expand...
Click to collapse
I cannot download it so I think I didn't try it (tried so many Rom's by now that it could be I found this Rom somewhere else).
Can you download and post a link?
Dutch T-Mobile ROM
Hi guys,
it has probably been posted before but here it is: http://rapidshare.com/files/94476422/HTC_P3300_NLD_3.13.404.1_4.1.13.44_02.94.90_Ship_R.exe.html
Note that if your phone is stuck in bootloader you probably have to disable 'Allow USB connections' in Activesync before connecting phone to PC to allow update-program to get a connection the phone.
Regards,
mytrinity
Watch out, this is an Artemis thread
vol123 said:
I cannot download it so I think I didn't try it (tried so many Rom's by now that it could be I found this Rom somewhere else).
Can you download and post a link?
Click to expand...
Click to collapse
Note that this ROM is not for the Elf but for the Artemis !!!!
mytrinity said:
Note that this ROM is not for the Elf but for the Artemis !!!!
Click to expand...
Click to collapse
Thanks and I am downloading. Will try anyway, currently my Elf is nog doing anything. The tip for unchecking usb before trying to upload is a good one, let me try that as well.
vol123 said:
Thanks and I am downloading. Will try anyway, currently my Elf is nog doing anything. The tip for unchecking usb before trying to upload is a good one, let me try that as well.
Click to expand...
Click to collapse
Nonono, you need to download this 128 Mb ROM : http://member.htc.com/ruudownload/t-mobile/TMobileElfWM6-TMNL.aspx
or this 256 Mb ROM: http://member.htc.com/ruudownload/t-mobile/TMobileElfinWM6-TMNL.aspx
Regards,
mytrinity
UPDATE:
The phone doesn't accept this ROM.....but we already knew that.....but it was nice to try
--------------------------------------------------------------------------------
YES! I am a little bit further, I now know what is on my elf:
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Device: ELF010000
CID: DOPOD001
Version: 1.14.710.2
Language: USA
Extracting: 00_Unknown.nb
Extracting: 01_SPL.nb
Extracting: 02_MainSplash.nb
Encoding: 02_MainSplash.bmp
Extracting: 03_ExtROM.nb
Extracting: 04_GSM.nb
Extracting: 05_OS.nb
Now trying to find a good ROM, anyone an ID how to get my elf back working?
(the only thing it does is hang in "smart mobility" screen or I can boot into bootloader, that is all.
vol123 said:
--------------------------------------------------------------------------------
YES! I am a little bit further, I now know what is on my elf:
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Device: ELF010000
CID: DOPOD001
Version: 1.14.710.2
Language: USA
Extracting: 00_Unknown.nb
Extracting: 01_SPL.nb
Extracting: 02_MainSplash.nb
Encoding: 02_MainSplash.bmp
Extracting: 03_ExtROM.nb
Extracting: 04_GSM.nb
Extracting: 05_OS.nb
Now trying to find a good ROM, anyone an ID how to get my elf back working?
(the only thing it does is hang in "smart mobility" screen or I can boot into bootloader, that is all.
Click to expand...
Click to collapse
You tried ?: http://www.dopodasia.com/download/R..._1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
mytrinity said:
You tried ?: http://www.dopodasia.com/download/R..._1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
Click to expand...
Click to collapse
I just did, "image is corrupted" error
Do you have more options?
elf or artemis?
there is already a large post about cid unlocking the elf elsewhere in the forum. This post was originated from an artemis user, and seeing as there are no other posts about cid unlocking from bootloader for the artemis could you people please stop posting about elf on this thread?
Someone please just kill this thread and start a new one, this is lame and getting nowhere.
Update ROM from Boot Loader Mode
Hi
Just go and download this factor ROM
http://rapidshare.com/files/122218660/HTC_1.12.405.01_026790_WWE_SHIP_In_Boot_Loader_Mode.rar.html
No activesync is required. Switch on your phone and when it hangs in the boot loader screen connect it with the pc and go.
devsur... wtf? posting virus infected files!!!
thanks for the link Devsur, too bad my kaspersky caught it red handed.
Don't download the last link... it's infected
Anyone wanna ban this individual?
Related
Has anyone tried this yet, One of my friends got it last night form a friend in T-Mobile its ment to be the latest Beta for T-Mobile but it contains a proper BT stack.
Has anyone heard anything about it?
when i get it tonight i will of corse post it here
John
I have not tried it because I don't know where to download it...
Can you give us a link...?
Thanks
Panja
my friend will email it to me tonight and i will post it here, I am pleased that you know of it, do you know how good the new BT stack is ment to be ( what new profiles have been added)
John
Hey John,
I don't know.
Nice you're going to post it!
Thanks in advance
here is the file, i have not tried it yet,
Please let us know how you get on with it
john
Sweet! Downloading right now
I am getting Country ID error when I am trying to install it
As per my usual request...
If anyone DOES manage to get it installed, can they run Cleartype and see if it is 'GOOD' Cleartype, like the O2 ROMS, or useless, garbled and coloury Cleartype, as per the Orange ROMS please?
As for the Country Code error, is it a T-Mobile or UK device you are installing on?
if not, you'll need to edit the nbf files for the correct country.
How to edit those files? TIA
NBF files are passworded, can't seem to open them in editor
ID64 said:
I am getting Country ID error when I am trying to install it
Click to expand...
Click to collapse
Follow this guide for switching roms.
http://forum.xda-developers.com/viewtopic.php?t=8205
applecom
Thanks for posting.
Panja said:
ID64 said:
I am getting Country ID error when I am trying to install it
Click to expand...
Click to collapse
Follow this guide for switching roms.
http://forum.xda-developers.com/viewtopic.php?t=8205
applecom
Thanks for posting.
Click to expand...
Click to collapse
Sorry probably it wont work because this T-Mobile roms comes with HimaUpgradeUt.exe version 1.1.0.0...
Mental block Not working for me, prolly too hot today If anyone cold post modified nbf's for FIDO network I'll really appreciate it.
TIA
the rom attached works perfectly
use ER2003Edit to unlock the nbf files
it's the fastest rom i've ever installed on my mdaII!
the 3 files included are:
rom 1.72
radio 1.12
extrom 1.72.04
sorry to be a dumb newbie, but can this work on an O2 UK XDA II? i dont need a walkthrough just a point in the right diretion
Thanks
pablo said:
the rom attached works perfectly
use ER2003Edit to unlock the nbf files
it's the fastest rom i've ever installed on my mdaII!
the 3 files included are:
rom 1.72
radio 1.12
extrom 1.72.04
Click to expand...
Click to collapse
ER2003Edit gives me errors- ERROR ACESSING IMAGE FILES when try to open ROM, however I can change country, but still getting Country error when I am trying to load them. :roll:
use the latest version of ER2003Edit and these password to unlock the 3 files
ms_.nbf 0x20040305
NK.nbf 0x20040304
radio_.nbf 0x20040306
Finally, changed nbf files etc, loading was in prgress and then - AGAIN WRONG COUNTRY CODE! How it stucked in Bootloader screen! Arghhh... Help
Phew! Fixed. Loading image now 21% done
Hi ID 64 what is your country ID ?
me I have a french Qtel 2020 with now the WWE 1.66 rom.
I have now the country error with the 1.72.
How you fix it ?
thanks
The new and improved hard-spl for our trinities, thanks to a little glitch in hard-spl's protecting itself against the new spl from HTC we have this new addition Olipro finished for us today. This is based on 1.05 MFG so we now have lnb capability and the rtasks. In addition of course, this SPL really should protect itself against being reflashed...
Donations to Olipro, I am only posting it...
EDIT: Should be working now!
Great as always!
Thanks for both Shadowmite and Olipro to offer us such nich piece.
It saves a lot of us from heartattack of flash problem...
great!! thanks to Olipro!
Great so quick
Thank you so much.
great works
thanks
Thanks for posting shadowmite... I couldn't sleep anyway so I might as well have sorted it myself, but never mind.
tomorrow I'll relocate it to the empirical thread
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Upgrade from P3600
Hi,
Can I upgrade with this tool my P3600 with original WM5 GPS activated Dutch version to WM6?
Or do I need to take other steps?
And, what's the best official WM6 rom to use for European P3600 ?
Thx,
Kopernikus
xtraart said:
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Click to expand...
Click to collapse
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Thanks for the hard work.
Olipro said:
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Click to expand...
Click to collapse
I run mtty with "task 32" and it return
task 32
Command error !!!
Cmd>task 32
Level = FF
Cmd>
and the version displays on my device is
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro
Does this mean we don't have to worry about the SPL getting overwritten? We can just flash whatever rom without any precautions?
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
HeartMan said:
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
Click to expand...
Click to collapse
I have this problem and spent almost an hour trying. You will need to find an OS only ROM(Eg. http://forum.xda-developers.com/showthread.php?t=312499) and it will flash successfully. Then you boot the PDA OS up and flash any suitable ROM.
I've removed the link for now, this is a bug in his patch and he's looking at it now. In the meantime you need to flash via SSPL or reflash the older hard-spl...
New Hard-SPL from Oli
Hello
Could you give us any news about new Hard-SPL?
When can we expect it?
Robidog
banzro said:
Hello
When can we expect it?
Robidog
Click to expand...
Click to collapse
my guess is....when its ready
I'm still waiting.
thanks to Olipro
I am waiting...
Subject: There are problems reported when flashing
PDAVIET Rom Black&Blue v3.7 For HTC Artemis & HTC Love ROM © by tom_codon
Issue: During flashing customized B&B v3.7 © (by tom_codon)
ROM, flasher stops at 3%-4%, stating - INVALID MODEL ID.
(it may other error messages appears as well, they are not analyzed yet)
Try following steps, it may solve your problem of flashing.
1. Download attached flasher;
2. Unrar to temp directory (like c:/XDA/);
3. Unrar ROM (TOM_Artemis_Black&Blue_v3.7.rar ©) to the same directory above;
4. Rename BB37.nbh file to RUU_signed.nbh;
5. Make sure usb cable is connected
6. Bring your device into bootloader
(http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets)
7. Start binary ROMUpdateUtility.exe, flash normally
Prerequisites:
- uspl is installed on your device;
- activesynch v.4.5 is installed (other version is not tested);
- os is win xp sp2 (other os were not tested);
Recommendations:
(as usual, best practice)
- always have original ROM for device before flashing;
- always have uspl installed before flashing;
: B&B v3.7 ROM does not re-flash SPL on Artemis. So, no need to re-flash uspl after flashing B&B v3.7 ROM.
OS, GSM, splash screen are re-flashed
hope this will help.
regards,
fdp24 said:
Subject: There are problems reported when flashing
PDAVIET Rom Black&Blue v3.7 For HTC Artemis & HTC Love ROM © by tom_codon
Issue: During flashing customized B&B v3.7 © (by tom_codon)
ROM, flasher stops at 3%-4%, stating - INVALID MODEL ID.
(it may other error messages appears as well, they are not analyzed yet)
Try following steps, it may solve your problem of flashing.
1. Download attached flasher;
2. Unrar to temp directory (like c:/XDA/);
3. Unrar ROM (TOM_Artemis_Black&Blue_v3.7.rar ©) to the same directory above;
4. Rename BB37.nbh file to RUU_signed.nbh;
5. Make sure usb cable is connected
6. Bring your device into bootloader
(http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets)
7. Start binary ROMUpdateUtility.exe, flash normally
Prerequisites:
- uspl is installed on your device;
- activesynch v.4.5 is installed (other version is not tested);
- os is win xp sp2 (other os were not tested);
Recommendations:
(as usual, best practice)
- always have original ROM for device before flashing;
- always have uspl installed before flashing;
: B&B v3.7 ROM does not re-flash SPL on Artemis. So, no need to re-flash uspl after flashing B&B v3.7 ROM.
OS, GSM, splash screen are re-flashed
hope this will help.
regards,
Click to expand...
Click to collapse
Thanks for your method.I want write it in my first post in Thead Rom Back&Blue v3.7 but u already writed it.Thanks again..
tom_codon:
it would be good to see response.
normally it should work.
regards,
Htc3300 non branded *does nto work for me*
I've read all the posts and cannot get past 3%
No problem installing 3.04
Can anyone help ... in particular someone with an unbranded device who has been successful with this
Thanks
http://htc.lan13.ro/ANDY_TOM_WM6_14072007_002.nbh
thats the one you need to try
http://forum.xda-developers.com/showthread.php?t=317160
read this post, and all will work fine
How to open .nbh file
Sorry if I should know this ..........
how do I open this file?
Thanks for your help with this
You guys are the best !!
Figured it out
Thanks a million
[email protected] said:
http://htc.lan13.ro/ANDY_TOM_WM6_14072007_002.nbh
thats the one you need to try
http://forum.xda-developers.com/showthread.php?t=317160
read this post, and all will work fine
Click to expand...
Click to collapse
Thanks man. After a lot of tries this thread help me to install BB3.7. You guys are great.
USPL
Hi all
I try to istall B&B but nothing on my xda orbit CID unlocked.
After upgrade to WM6 from 02 i return it to WM5 from O2, at 3% upgrade close, what is USPL and where i can found it?
Thank you
a40 said:
Hi all
I try to istall B&B but nothing on my xda orbit CID unlocked.
After upgrade to WM6 from 02 i return it to WM5 from O2, at 3% upgrade close, what is USPL and where i can found it?
Thank you
Click to expand...
Click to collapse
Link here:
http://forum.xda-developers.com/showthread.php?t=311403
please read in Forum..
tom_codon said:
Link here:
http://forum.xda-developers.com/showthread.php?t=311403
please read in Forum..
Click to expand...
Click to collapse
Thank you my friend
Hello all,
i'm trying to upgrade my jasjar to wm6, just downloaded Wizard Service Tool and clicked on "enab. rapi + unsigned". Then "device info" and i have obtained this report:
--------------------------
Wizard Service Tool v4.2.2
22/01/09 10:01:38
CPU Manuf. FAILED
IMEI:
=> Bootloaders:
IPL: (G3 device)
SPL date unknown
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 0.0
Registry AKU: .2.0.0
Radio values FAILED
=>Extended_ROM:
Version: 1.30.169 ITA
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
72a24b06 - 977.98M (0x3d1fc000)
33d6c012 - 9.99M (0x9fd800)
33e230ea - 44.43M (0x2c6dc00)
53e71212 - 56.75M (0x38c0000)
b3e71026 - 3.19M (0x330000)
73e71002 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000802202020c2f157a1507051b
Key Index: 20
All Done.
--------------------------
Question: it's normal that a lot of fields are empty? IPL and SPL especially?
I'm sure to have a "G3" even if IPL is empty?
...and someother generic question:
ROMS are all interchangeable? If i want to try another wm6 rom, can i reflash?
ROMS contains all languages, or if i want to retain ITALIAN i have to search for an italian ROM?
Thanks very much!
you can reflash as many times as you want and languaje can be anyone you like
<Good luck,
orb3000 said:
you can reflash as many times as you want and languaje can be anyone you like
Click to expand...
Click to collapse
Thanks, now i'm stopped because i dont know if i have a G3 or G4 and dont know how to interpret the fact that Wizard utility dont show a lot of informations... maybe a problem....
ZuperMario said:
Thanks, now i'm stopped because i dont know if i have a G3 or G4 and dont know how to interpret the fact that Wizard utility dont show a lot of informations... maybe a problem....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=348882
Good luck,
orb3000 said:
http://forum.xda-developers.com/showthread.php?t=348882
Good luck,
Click to expand...
Click to collapse
Thanks but the real question is why wizard utility dont show a lot of information: if there is something "strange" or locked on my device, i can get unpredictable results going ahead with reflashing procedure... i think.
I have the same problem with my Universal.
I flashed it with Tomal's 8.2 without trying Wizard service tool, 'cause Uni arrived me with wm6.0, so I thought it was unlocked.
Now I'm going to flash a friend of mine original G3, and looking for how to unlock it, I found some apps that I tried on mine.
The message I receive on Wizard Service Tools is similar to yours, also when I check CID it says that the cheksum is incorrect:
-----------------------------------------
Decrypted stored sum: 2020202020202020
Decrypted calcd sum: CB2C31FAACFE5801
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
-----------------------------------------
Question is: may I use this program to superCID the G3 Uni?
I need an help i receive this from Netherlands and need to change language in italy so i dowload P3300 Italy 3.13.408.1_02.94.90 Ship R, but first i use USPL and all process go ok, but after when i try to charge this Rom i receive this error 244 ivalid Model ID, why
Tanks for help
ILP 1.12.0001
Spl 1.11.cmon
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Are you using Vista? If yes, then try downloading in a computer with Windows XP?
gsmsupport said:
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Click to expand...
Click to collapse
yeh,i have same problem.did spl as well but dose not update rom and tells invalid.whats to do plz help.
ipl 1.14.0001
spl 1.11.0000
os 1.14.0.0
Please, don't revive threads from over a year old. As I appreciate you using the search function, if you find a thread which is over a year old, best thing to do is create a new thread.
Also, this thread is related to upgrading your Artemis, so it doesn't really fit in ROM Development. Closing the thread.