I tried to install the 838Pro_HK_ENG_WM6_Upgrade_20070712.zip and got
an Error...
ERROR [294] : INVALID VENDER ID
Any help?
hi, would u mind sharing your file with all of us?
by mirroring, or BT?
thanks in advance.
Got it from the rapidesharelink.
Update worked with the RUUWrapper.exe from Schaps (extractet from the exe with winrar)
1: extract the official exe with winrar
2: extract the RUU_Inside.exe
3: copy the nbh file in the directory of your choice
4: extract the RUUWrapper.exe from schaps
5: put the RUUWrapper.exe in the same directory as the nbh file
6: start and enjoy
Ah... I saw it.
To your question:
Which variant of Hermes are you using?
Do you have SPL v2.10?
See my previous post.
My Update ist in progress.
21%
Related
how i can edit WM2003SE ROM file? (NK.nbf) the er2003edit open the file...
write "ROM Type: Unknown" and i cant do nothing... no add file no remove files no extract... just nothing... someone know about this something?
ROM: http://forum.xda-developers.com/viewtopic.php?t=13588&postdays=0&postorder=asc&start=0
With ER2003Edit you can not remove/add file from NK.nbf, only from MS_.nbf
Make sure in the file open dialog window (the one that opens when you choose file/open) you do NOT select "Auto Detect" as file type.
Where i can get or how i can create MS_.nbf file ?
And how i upload it to my Device ?
i got the rom with 2 files Radio.nbf and NK.nbf ... if i put it in same directory the Upgrade will upload the MS_.nbf too ?
MS_.nbf contains the extended rom
several can be found in the himalya upgrading forum.
and yes an upgrade exist out of three files :
OS = NK.nbf
gsm... = radio_.nbf
Extended rom = MS_.nbf = a few updated drivers, extra applications, personalisations for each country/ operator,...
see http://wiki.xda-developers.com/index.php?pagename=HimalayaRomkitchen for more info
Hi,
I made the mistake to buy JasJar in Italian and now I'm late for all upgrades. There's the possibility to change language into English?
Thanks
Stefano
sure ... try the new qtek 9000 rom
I've tried
Hi, I've tried with WWE Rom but installing I get an error due the different language.
Thanks for help me.
By the way....
.... I've not qtek but Imate JASJAR.
Thanks
here you have a step by step
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=
I'm unable
Hi I've done:
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
At this time I recieve a message that says me:
ERROR 120: CONTRY ID ERROR
The ROM inage that you're trying to use is not designed to work on your device. Please check the vender Web site and download the correct ROM update.
What I can do?
Thanks
run again the
MaUpgradeUt_noID for the upgrade
I'm sorry to disturb you but I?m not able. I've tried to run MaUpgradeUt_noID but appear a message saying me that is not possible run the selected application as RUU.dll was not found.
I've copied MaUpgradeUt_noID in the same directory of the ROM file. Is that right??
Thanks and sorry.
May be the problem is:
1b. unzip the exe file to a directory
Is posible to unzip to a directory? I run the .exe file and I see that file decompress but I don't know where.
The problem is that I put MaUpgradeUt_noID in the .exe directory and due to that I have error message.
is there a program that unzip an exe file?
Thanks
Download winrar. Right click on the file and select "extract to...."
Can you please backup the content of the "windows" directory before upgrading? It should contain all the certified .mui files for the italian localization already signed and ready to work in the wm5 jasjar environment. Then put a zip file in the upload area of this forum. I would like to experiment a little bit with the italian localization.... 8)
I just performed the upgrade without any glitch.
Now I have the last english.ROM
Now the only problem is that special symbols on the keyboard are wrong.
I'm sure there is a registry hack that switches the keyboard back to my italian keyboard (I have an italian JasJar).
Do you know what key should I change and what value should I put there?
Thanks a lot,
Francesco
Was not possible to copy
Dear Topogigi,
Thanks for the suggestion about winrar. Now is OK.
I was not able to copy the windows directory as I get some error copying. Sorry.
Ciao
DONE!!!
Dear all, I got it!!! THANKS FOR YOUR HELP.
Now I've a small problem: Keyboard. Italian KB has differente layout than WWE. There's way to solve this problem? For example, @ is FN+Q and in WWE is FN+2...
Thanks for all!!
Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.
Using winrar extract the files from the .exe and replace the upgrade executable with the NoID file. Worked for me!
HTH
Fin
Could you elaborate please
Sorry but I only got my xda exec today and am still a bit of a newbie. Could you possibly take me through this step by step if that's not too much of a pain? I have dl the jasjar file but could you point me to the noid file.
Many Thanks
Tim
Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.
Re: Universal upgrading to Jasjar ROM (sorry for wrong cross
claudioita said:
Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.
Click to expand...
Click to collapse
You can use winzip to unpack the .exe..... and stop swearing.
How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure
Auredelrio said:
How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure
Click to expand...
Click to collapse
is it for change rom???
i need to change from spanish to italian....
can u help me?
thanks
...and I need to change it from French to Spanish. The Spanish update provided by Asus doesnt work "in the device's version"