Upgrading to Jasjar ROM - Upgrading, Modifying and Unlocking

Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.

Using winrar extract the files from the .exe and replace the upgrade executable with the NoID file. Worked for me!
HTH
Fin

Could you elaborate please
Sorry but I only got my xda exec today and am still a bit of a newbie. Could you possibly take me through this step by step if that's not too much of a pain? I have dl the jasjar file but could you point me to the noid file.
Many Thanks
Tim

Related

JasJar Italian

Hi,
I made the mistake to buy JasJar in Italian and now I'm late for all upgrades. There's the possibility to change language into English?
Thanks
Stefano
sure ... try the new qtek 9000 rom
I've tried
Hi, I've tried with WWE Rom but installing I get an error due the different language.
Thanks for help me.
By the way....
.... I've not qtek but Imate JASJAR.
Thanks
here you have a step by step
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=
I'm unable
Hi I've done:
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
At this time I recieve a message that says me:
ERROR 120: CONTRY ID ERROR
The ROM inage that you're trying to use is not designed to work on your device. Please check the vender Web site and download the correct ROM update.
What I can do?
Thanks
run again the
MaUpgradeUt_noID for the upgrade
I'm sorry to disturb you but I?m not able. I've tried to run MaUpgradeUt_noID but appear a message saying me that is not possible run the selected application as RUU.dll was not found.
I've copied MaUpgradeUt_noID in the same directory of the ROM file. Is that right??
Thanks and sorry.
May be the problem is:
1b. unzip the exe file to a directory
Is posible to unzip to a directory? I run the .exe file and I see that file decompress but I don't know where.
The problem is that I put MaUpgradeUt_noID in the .exe directory and due to that I have error message.
is there a program that unzip an exe file?
Thanks
Download winrar. Right click on the file and select "extract to...."
Can you please backup the content of the "windows" directory before upgrading? It should contain all the certified .mui files for the italian localization already signed and ready to work in the wm5 jasjar environment. Then put a zip file in the upload area of this forum. I would like to experiment a little bit with the italian localization.... 8)
I just performed the upgrade without any glitch.
Now I have the last english.ROM
Now the only problem is that special symbols on the keyboard are wrong.
I'm sure there is a registry hack that switches the keyboard back to my italian keyboard (I have an italian JasJar).
Do you know what key should I change and what value should I put there?
Thanks a lot,
Francesco
Was not possible to copy
Dear Topogigi,
Thanks for the suggestion about winrar. Now is OK.
I was not able to copy the windows directory as I get some error copying. Sorry.
Ciao
DONE!!!
Dear all, I got it!!! THANKS FOR YOUR HELP.
Now I've a small problem: Keyboard. Italian KB has differente layout than WWE. There's way to solve this problem? For example, @ is FN+Q and in WWE is FN+2...
Thanks for all!!

Universal upgrading to Jasjar ROM (sorry for wrong crosspost

Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.
Re: Universal upgrading to Jasjar ROM (sorry for wrong cross
claudioita said:
Hi!
Trying to figure out how to upgrade but I am missing something.
I downloaded the file JASJAR_WWE_11353_137_10301.EXE.
When I run it it gives me a country ID Error 120
Following other posts I downloaded the file MaUpgradeUt_noID.exe which gives me the error missing run.dll.
In another post it says to put the MaUpgradeUt_noID.exe in the same directory of the JASJAR_WWE_11353_137_10301.EXE.
BUT THE JASJAR_WWE_11353_137_10301.EXE DOES NOT CREATE ANY FILE NOR DIRECTORY.
WHERE THE HELL ARE THOSE EXTRACTED FILES???
P.S. What a nightmare.
Click to expand...
Click to collapse
You can use winzip to unpack the .exe..... and stop swearing.

HELP ME - COUNTRY ID ERROR

HOW I CAN UPDATE MY JASJAR FROM JASJAR_WWE_11353_137_10301 TO JASJAR_ITA_11346_126_10301_ship??
COUNTRY ID ERROR
Thanks and excuse my english
Just unpack/extract the JASJAR_ITA_11346_126_10301_ship file into a directory.
donwload the attached file to this same directory
Run it and the Country ID error will come out, run it again right after, and it should work
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
thanks, but the update is ok without country error, but after the reset the screen is black with word: serial and v1.0
sorry...i found out the file you put for download but if i run the rom twice after have the rom and the file in the same directory i have the same error message....coul you please help me?
Thanks
Carlo Salvatore
carsa read pm
did IT!!!!...thank a lot...
carsa help me in private, please
edoalom hope everithing was fine!
i've the same problem, can you help me, too?
directory?
carsa said:
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
Click to expand...
Click to collapse
I've got the .exe file and it simply wants to self-install in a directory with my JJ. So, which directory should I try to install this then?
thanks.
edved
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Italian to English
I purchased an imate jasjar in Italy last week. The salesperson confirmed that I can change the language from Italian to English. But when I contacted the Imate people they say it is not possible, Can someone guide me?
Thanks Felician
hanhha2000 said:
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Click to expand...
Click to collapse
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Will this technique work for my i-mate JAMin? im just afraid to screw up my device completely cos iv heard that that can happen
thanx for your help pls reply asap
I've the same problem. can you help me to solve. tnk
DeVegas said:
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Click to expand...
Click to collapse
Hi,
The way i use is run the update rom and when appear the Country error, open the windows explorer and copy the folder in the temporary folder to a new location, then put the file ...noID.exe in the new folder.

How to convert _setup.xml to a cab

Hi,
I have searched and searched for the answer to this but can someone please help.
have downloaded some add on's, the dir includes the _setup.xml file which i believe i have to change to a cab file using makecab.exe, i have done this and copied the cab and all the other files on to the device and tried to run the cab but always get, their has been an error, the cab can not be installed. Tried it with several programs, all give same error.
Only thing I wonderd is if the makecab is the same for 2005 as it is for mobile 2006 ??
or am i going about this totally the wrong way, any help MUCH MUCH appreciated.
i use makecab comed with my winxp ( the one used to create cab for your pc)
in a dos prompt and never had a problem..
maybe you could have wrong sintax inside your xml file..
anyway here is the command I use
makecab /D COMPRESS=OFF _setup.xml whatevername.cab
they all work on my hermes.
Bye
Thanks for that, i was not using the -d setting but still gives me same problem.
I am trying to install Schapps Operator settings program, do makecab /D compress=off _setup.xml setup.cab
copy this and all the other files in one directory to the storage card of the phone and run the setup.cab, goes to ask me wher ei want to sotre it, i select device then it says "Schaps operator setup cannot be installed', this is the same with another program i try to install.
Arrrrgggghhh !!!!
wait a moment.. what you mean when you say program?
with this command you can only "store" an XML file into a cab file.
This xml should be something simple like a provisioning xml file not
a program.
To create a cab file to install a program you need a different tool
(something like wince cab manager), more complete and powerful.
Ciao
J
jarod_73 said:
i use makecab comed with my winxp ( the one used to create cab for your pc)
in a dos prompt and never had a problem..
maybe you could have wrong sintax inside your xml file..
anyway here is the command I use
makecab /D COMPRESS=OFF _setup.xml whatevername.cab
they all work on my hermes.
Bye
Click to expand...
Click to collapse
Hi jarod_73,
i have just created cab file using your instruction and it worked well if you are runing cab file manually.
i have startup.xml file on my device that can run cab files and install them to any folder i want on my windows mobile device.
my question is.. after i added my new file xxx.cab then i noticed that allthugh file exist and even runed it, then it doesn't install it automatically.
only manual operation can run this cab.
do you have any suggestions?
thanks
ran.
msward3380 said:
Hi,
I have searched and searched for the answer to this but can someone please help.
have downloaded some add on's, the dir includes the _setup.xml file which i believe i have to change to a cab file using makecab.exe, i have done this and copied the cab and all the other files on to the device and tried to run the cab but always get, their has been an error, the cab can not be installed. Tried it with several programs, all give same error.
Only thing I wonderd is if the makecab is the same for 2005 as it is for mobile 2006 ??
or am i going about this totally the wrong way, any help MUCH MUCH appreciated.
Click to expand...
Click to collapse
Same problem here and it use to work for me..maybe its windows 7 i dunno

who knows exactly runs "P535 RomTool"?

How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure
Auredelrio said:
How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure
Click to expand...
Click to collapse
is it for change rom???
i need to change from spanish to italian....
can u help me?
thanks
...and I need to change it from French to Spanish. The Spanish update provided by Asus doesnt work "in the device's version"

Categories

Resources