SDHC Driver extracted from ASUS P535 WM6 Upgrade package - Upgrading, Modifying and Unlocking

Extracted by Oldcat
not test on another devices yet.
maybe works with all WM6 device.
please report the test result.

Thanks windirt post!

cool,i want to try but i cant copy the original sdcard.dll sdbus.dll sdmemory.dll to backup.
any body tell me how to copy those 3 files.

sx1-doc said:
i cant copy the original sdcard.dll sdbus.dll sdmemory.dll to backup....
Click to expand...
Click to collapse
These files are in the ROM image. You donnot have to backup them. They will not disappear except you flash a new ROM.

warning dont install to asus p525.
i am formatting my asus p525 now.
after installing it asked for softreset soo i did.
after restarts the device didnt recognice any memory card (2gb,4 gb).
tried to put back the old dlls and the old registry key ,but the device refuse to recognise any memorycard plug to it....

I had the same problem. After installing the above patch my phone would not read any memory card. I don't know what changes the cab file made so that I could reverse them myself. I am going to do a hard reset to be able to read the card again.

didnt work on my prophet M600

Anyone try this out on a 700wx??

A list of what the cabinet does:
----- Debugging -----
----- Dir Section -----
InstallDir = %CE1%\SDHC V1.5.0
2 = {win}\Start Menu
3 = {win}
----- File Section -----
sdbus.dll --> {win} (0)
sdcard.dll --> {win} (0)
sdmemory.dll --> {win} (0)
--- Registry Section ---
HKLM,Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity,BlockTransferSize = '64'(TYPE_DWORD)
HKLM,Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity,Prefix = 'DSK'(TYPE_SZ)
HKLM,Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity,Profile = 'SDMemory'(TYPE_SZ)
HKLM,Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity,Dll = 'SDMemory.dll'(TYPE_SZ)
HKLM,Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity,IClass = ''(65536)
----- Link Section -----
----- End Debug -----

...
It works with my ASUS P535 and TOSHIBA SDHC 4GB miniSD card.. but not perfect..
i mean.. card 'disappearing' very often ..too often. In practice.. most times when I wake pda from sleep mode.
I hope asus will made a patch like for myPal 6x6
cheers for this anyway

SDHC P535
Same here with Transcend 4GB miniSD (P535 WM6).

SDHC P535
Same here with SanDisk 4GB miniSDHC (P535 WM6).

Does anyone know if there is a fix for this problem yet?....thanks
nevermind......found the registry hack on the asustek forum.

irv777 said:
Does anyone know if there is a fix for this problem yet?....thanks
nevermind......found the registry hack on the asustek forum.
Click to expand...
Click to collapse
Hack? Where?

http://vip.asus.com/forum/view.aspx...1&board_id=6&model=Mypal A696&page=6&count=66

Cool, the hack seems to work

Not recognized by my Qtek 9100. But let's keep the hope. Will be possible.

are there i-mate smartfilip sdhc driver

Related

Italians JasJar Aku 2 with AKU 3 Performance.

So, I got it.
Thank You very very much Lt. Ivan for this.
I've do 4 Reg Files to Import with Resco Reg Editor, and after Reset You have a normal Aku 2 JasJar-Qtek 9000 with Aku 3 Performance.
Do this after a Hard Reset, it's functioned not by normal overwriting of Register. And do not a Recover, because You will change the new Values.
P.S. At the moment is only for Italian Jasjar
THX so much I will try it!
:lol:
Everybody say me thare is a "Problem".
On the Control Panel\System\About, You will see in the Id of the Pda my name. I think is not so worry. You can change with Your Name.
Sorry for this
P.S. This Work is dedicated to all Developers of Xda and to the Master of the Maters: Buzz :lol:
James72 said:
Everybody say me thare is a "Problem".
On the Control Panel\System\About, You will see in the Id of the Pda my name. I think is not so worry. You can change with Your Name.
Sorry for this
Click to expand...
Click to collapse
How do I change it?
To change my name, you mean?
Go to this Key:
HKLM\Ident\Name and change it. Then do a Soft Reset
Problems
I run all the scripts and when i do a soft reset, it rebots with a white screen and doesnt look like its going any whare from that. I have a imate jasjar with the latest imate rom. it gives met the first screen with the imate logo and where it normally would give me the windows mobile screen it is white. have also notice that it change the language on somethings, like the today plugins and the calender softkey from english to some other language.
Same here. White screen. Finally hard reset and restore backup
Seems like some entries in the cab files are Italian. For example there are entries referring to \Programmi\... instead of \Program Files\... Not surprising it doesn't work for non-Italian ROMs.
magxs said:
Seems like some entries in the cab files are Italian. For example there are entries referring to \Programmi\... instead of \Program Files\... Not surprising it doesn't work for non-Italian ROMs.
Click to expand...
Click to collapse
Yes, for the moment the tweak is developped on the italian rom.
Yes, You have right. I've thinked that was for all Jasjar.
The reason is because the *mui of the Rom are 0410 and Yours are 0409.
I will ottemperate as well the same Trick for Englishes Jasjar.
:wink:
i have jasjar italian and i have aku3 of Ivan but now have original aku2 qrek whit file of James and it's ok.
Thank you James
maury
Do you have a plan to make it for Qtek 9000 WWE rom?
Thanx.
So, I can tell You how to do this.
1) To First You must flash the AKU 3 Rom Beta 4 of Ivan in your Pda
2) After reboot of Pda don't syncronized It how User, but how Guest.
3) Install in Your Pda "Resco Reg Editor".
4) Go to this Keys:
- HKCR\BOOTSTRAP (Save It on Sd Card with name 0)
- HKCU\PERFORMANCE (Save it on Sd Card with name 1)
- HKCU\Start (Save It on Sd card with name 2)
- HKLM\Loader (Save It On Sd card with name 3)
- HKLM\nls (Save It On Sd Card with name 4)
- HKLM\Services\ScreenRotate (Save It On Sd with name 5)
- HKLM\System\Storagemanager (Save the whool Reg key by Sd with name 6)
5) Then , You have the Regkeys on Your SD.
Reflash now Your Pda with your preferst Rom.
6) After Reboot of the Pda Install on this Resco Reg Editor.
7) By the menu you will see the voice "Import".
You will now Import the Keys that You haved Saved on Sd.
Now You will rewrite the original Reg Files with those.
8) Make then a Soft Reset. You got It.
P.S. The same procedures is for all Qtek 9000-JasJar, Afrikaans, French, Germans etc.....
So, now it's Corrected with Name and Storage renaming
This is maked with the RC1 of Ivan. Italian, not other Language
[/quote]- HKCR\BOOTSTRAP (Save It on Sd Card with name 0)
- HKCU\PERFORMANCE (Save it on Sd Card with name 1)
- HKCU\Start (Save It on Sd card with name 2)
- HKLM\Loader (Save It On Sd card with name 3)
- HKLM\nls (Save It On Sd Card with name 4)
- HKLM\Services\ScreenRotate (Save It On Sd with name 5)
- HKLM\System\Storagemanager (Save the whool Reg key by Sd with name 6)
Why export all registry keys if only above necessary? :?:
Click to expand...
Click to collapse
Sorry for the body/quote inversion
Because this will be overwrite the Aku 2 Reg Files.
Nice
How you update the reg file from english to Italian?
Yes

UPGRADE asus p535 WM6 cheksum error

Hi
i have a P535 FR
i upgrade my phone V.4.3.14 FRA => V.4.7.13 FRA
bootloader upgrade ok
but when cap update i have cheksum error
and now always blue picture
when i put Power+Camera+Recorder + reset to the SD download mode phone must have nb0 file
i rename AsusP535.cap V.4.7.13 FRA to GalaxyII.nb0 but i have wrong language when i make this
please help me !!!!
fennec62 said:
Hi
i have a P535 FR
i upgrade my phone V.4.3.14 FRA => V.4.7.13 FRA
bootloader upgrade ok
but when cap update i have cheksum error
and now always blue picture
when i put Power+Camera+Recorder + reset to the SD download mode phone must have nb0 file
i rename AsusP535.cap V.4.7.13 FRA to GalaxyII.nb0 but i have wrong language when i make this
please help me !!!!
Click to expand...
Click to collapse
Hi ! try this :
download http://rapidshare.com/files/41892424/USB.WinCE.V4.3.15.WWE.RU.2007.03.20.zip.html
this archive contains nb0 file with eng wm5 p535rom and russian support, copy it to miniSD press and hold recorder+power+navigation down+reset (5 sec). It will return back wm5 on your device.
On wm5 press start menu go settings --> system settings --> regional settings ang change it you like
If all be right you may try agan to update your device to wm6 :
1) Extract to miniSD asusp535.cap from official asus firmware archive.
2) Copy asusp535.cap to galaxy.cap (on miniSD)
3) Copy asusp535.cap to galaxyII.cap (on miniSD)
4) Download and extract attached archive (it have folder 2577 with autorun.exe and ASUS.UnlockLangID.exe)
5) copy folder 2577 to miniSD
6) copy ASUS.UnlockLangID.exe
file structure of minisd :
\2577\autorun.exe
\asusp535.cap
\galaxy.cap
\galaxyII.cap
\ASUS.UnlockLangID.exe
7) Now ! put miniSD to device
8) If upgrade programm say to you "language is not your device" or simmilar
run ASUS.UnlockLangID.exe and try to run autorun.exe agan
8) Enjoy wm6
p.s. Sorry for my bad english
I know the issue, you definitely used a 256M miniSD card for the upgrade. please use a larger card than 256Mb. or you will encouter checksum error again
i have only 512mb card is it ok ?
windirt said:
I know the issue, you definitely used a 256M miniSD card for the upgrade. please use a larger card than 256Mb. or you will encouter checksum error again
Click to expand...
Click to collapse
i search the modified 4.3.25 HK00 ROM
you know where i can found
thanks
artem_id said:
Hi ! try this :
download http://rapidshare.com/files/41892424/USB.WinCE.V4.3.15.WWE.RU.2007.03.20.zip.html
this archive contains nb0 file with eng wm5 p535rom and russian support, copy it to miniSD press and hold recorder+power+navigation down+reset (5 sec). It will return back wm5 on your device.
On wm5 press start menu go settings --> system settings --> regional settings ang change it you like
If all be right you may try agan to update your device to wm6 :
1) Extract to miniSD asusp535.cap from official asus firmware archive.
2) Copy asusp535.cap to galaxy.cap (on miniSD)
3) Copy asusp535.cap to galaxyII.cap (on miniSD)
4) Download and extract attached archive (it have folder 2577 with autorun.exe and ASUS.UnlockLangID.exe)
5) copy folder 2577 to miniSD
6) copy ASUS.UnlockLangID.exe
file structure of minisd :
\2577\autorun.exe
\asusp535.cap
\galaxy.cap
\galaxyII.cap
\ASUS.UnlockLangID.exe
7) Now ! put miniSD to device
8) If upgrade programm say to you "language is not your device" or simmilar
run ASUS.UnlockLangID.exe and try to run autorun.exe agan
8) Enjoy wm6
p.s. Sorry for my bad english
Click to expand...
Click to collapse
nothing to do
always wrong language
fennec62 said:
nothing to do
always wrong language
Click to expand...
Click to collapse
ok lets try this :
on my attach utility for p535
1) download and extract wm5 FRA rom for your asus
2) download attach and extract it
3) put P535RomTool.exe to folder with galaxyII.cap
4) in command prompt run command "P535RomTool -d5 GalaxyII.cap" if it not work download this http://www.microsoft.com/downloads/...D9-AE1A-4A14-984D-389C36F85647&displaylang=en
5) now you have FRA galaxyII.nb0
6) flash it to your device and enjoy power tool for p535
P.S. For extract wm6 rom to nb0 command is : P535RomTool -d6 AsusP535.cap
Try this: format the miniSD in FAT, not FAT32. I have had the same error message as you...
artem_id said:
ok lets try this :
on my attach utility for p535
1) download and extract wm5 FRA rom for your asus
2) download attach and extract it
3) put P535RomTool.exe to folder with galaxyII.cap
4) in command prompt run command "P535RomTool -d5 GalaxyII.cap" if it not work download this http://www.microsoft.com/downloads/...D9-AE1A-4A14-984D-389C36F85647&displaylang=en
5) now you have FRA galaxyII.nb0
6) flash it to your device and enjoy power tool for p535
P.S. For extract wm6 rom to nb0 command is : P535RomTool -d6 AsusP535.cap
Click to expand...
Click to collapse
HOUAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
LOT OF THANKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i take WM6 fr and i use P535RomTool -d6 AsusP535.cap
and i put galaxyii.nb0 in my asus with usbloader
and WM6 welcome !!!!!
all is ok
you is my hero !!!!
thanks
If You wont use miniSDHC install SDHC_V5.CAB cab to device I use now miniSDSH Ridata 4gb
In attach extrom of TH rom p535, dont install all cabs only SDHC_V5.CAB cab !
Backup before install it
THANKS
where can i buy a miniSDHC 4gb
how could you extract this extended ROM content?
this is important because, ASUS released a new WM6 rom for Taiwan users, which have V1.86 extended ROM. Because Taiwa users called ASUS 0800 phones, and complained about Camera bug.
look at last page (translate with google from chineese to english, and look for message #54)
http://www.mobile01.com/topicdetail.php?f=222&t=357254&last=3217287
i think all you need is "ASUS Camera dll.dll" file from archive AdditionPkgWWE.CAB in extended ROM
i could extract the files from AsusP535.cap that contains core wm6 dll, but i coun't extract files from GalaxyII.cap. is this the archive that contains "install.Thailand.CAB" and "SDHC_V5.CAB" extended ROM?
my dream is to construct an WWE WM6 rom that contains core wm6 rom, and updated AdditionPkgWWE.CAB from V1.86 extended ROM but not contains "install.Thailand.CAB" and "SDHC_V5.CAB". Because i don't live in thailand and iGO is not working with SDHC drivers
here you could see that, taiwan rom was updated:
ftp://ftp.asus.com.tw/pub/ASUS/IA/P535/
artem_id said:
If You wont use miniSDHC install SDHC_V5.CAB cab to device I use now miniSDSH Ridata 4gb
In attach extrom of TH rom p535, dont install all cabs only SDHC_V5.CAB cab !
Backup before install it
Click to expand...
Click to collapse
Need help please
Hy , I get a P535 FR, ist's it possible anyway to chenge to IT.
I 've all ready try to install the original asus package from fra to ita but i get the
language error message.
Sorry but i haven' t exèperience with PDA hardware.
Can I use the descrived method? :
535RomTool -d6 AsusP535.cap
to get the ita version of
galaxyII.nb0
and then try to install it ? Is into galaxyII.cab aftrer the rom tool process only the wm6 in IT or it's containing the IT firmware too?
I think theat the best think to reach is to get an hardware with IT Firmware with IT WM6 installed.
Actually I have install e the last FR disponible asus version.
Please help Me, I don't wont risk to damage or locking the P535.
Thanks a lot
Best regards
thanks a lot, you are god...my asus its 4 days out of this world, but the read me which you place hier...no word for this... thank you thank tHANK
thanks a lot, you are god...my asus its 4 days out of this world, but the read me which you place hier...no word for this... thank you thank tHANK
hi, is it possible do it for:
change my languange spanish to italian in the same way??
please help me. thanks
ftp://xda:[email protected]/asus/wm6/GalaxyII.NB0
baay2008 said:
ftp://xda:[email protected]/asus/wm6/GalaxyII.NB0
Click to expand...
Click to collapse
what is this?
535 not booting
Hi guys
just tryed to upgrade a 535 and it stoped in the middle of the process. Now phone is not booting. Can someone help me ?
Cheers
Ivo
Sorted.
After some batery removals went to upgrading screen again. Managed to upload english wm6 rom over russian wm5.
Thanks for solution.
Ivo

Finally Sdhc Works With This Cab !!!

Hi there all,
i have been searching for a solution for the sdhc support. Lots of emails to providers, lots of threads in forums but no solution.
Tried a lot of updates cabs and fixes but did not work!
Finally a cab in XDA-Dev worked! Now, I can see my 4GB SDHC Sandisk Storage card in my File Explorer
Here is the link for the CAB-File
I hope it works for you too..
My Device: Xda Orbit (P3300) with Pdaviet 4.1 Rom, Radio v02.97.90
Please post your results here.....
Regards from Germany
thanks from china
well if it works for you will work for us too
NikMel said:
well if it works for you will work for us too
Click to expand...
Click to collapse
Resuuullllttss??
Glad to Hear....
This is great news! now to find the biggest card available and try it myself!
Well,
i have installed the old v4.0 and tried the cab, with PDAViet ROM v4.0. Unfortunataly didnt work.
I think it works only with verison 4.1. Iam installing now 4.1...
No no noooo..
It does not work!!!
After installation of cab, it created a Storage Card folder in root. But this folder does not contain my files... (This appears only on v4.1) I see only "mail, cacheie and temp" folders in this Storage Card folder, and these are not the files on my Card...
Sorry...
So, keep searching for a solution...
Regards...
P800w_SEA_ENG_WM6_Upgrade_20070713 rom already has this driver and support
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"BaseClockFrequency"=dword:01312d00
"CDPriority"=dword:00000065
"CardDetectSysIntr"=dword:0000001d
"SDIOPriority"=dword:00000064
"ControllerIRQ"=dword:0000001c
"Prefix"="SHC"
"Dll"="OMAP850_SDHC.dll"
"Order"=dword:00000021
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,41,33,32,39,34,32,42,37,2d,39,\
32,30,43,2d,34,38,36,62,2d,42,30,45,36,2d,39,32,41,37,30,32,41,39,39,42,33,\
35,7d,00,00
"IOCTL"=dword:00000004
"FSD"="FATFS.DLL"
"DisablePowerManagement"=dword:00000001
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,38,44,44,36,37,39,43,45,2d,38,\
41,42,34,2d,34,33,63,38,2d,41,31,34,41,2d,45,41,34,39,36,33,46,41,41,37,31,\
35,7d,00,00
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"
NikMel said:
P800w_SEA_ENG_WM6_Upgrade_20070713 rom already has this driver and support
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
"BaseClockFrequency"=dword:01312d00
"CDPriority"=dword:00000065
"CardDetectSysIntr"=dword:0000001d
"SDIOPriority"=dword:00000064
"ControllerIRQ"=dword:0000001c
"Prefix"="SHC"
"Dll"="OMAP850_SDHC.dll"
"Order"=dword:00000021
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,41,33,32,39,34,32,42,37,2d,39,\
32,30,43,2d,34,38,36,62,2d,42,30,45,36,2d,39,32,41,37,30,32,41,39,39,42,33,\
35,7d,00,00
"IOCTL"=dword:00000004
"FSD"="FATFS.DLL"
"DisablePowerManagement"=dword:00000001
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"
[HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity]
"IClass"=hex(7):\
7b,41,34,45,37,45,44,44,41,2d,45,35,37,35,2d,34,32,35,32,2d,39,44,36,42,2d,\
34,31,39,35,44,34,38,42,42,38,36,35,7d,00,7b,38,44,44,36,37,39,43,45,2d,38,\
41,42,34,2d,34,33,63,38,2d,41,31,34,41,2d,45,41,34,39,36,33,46,41,41,37,31,\
35,7d,00,00
"Profile"="SDMemory"
"BlockTransferSize"=dword:00000040
"Prefix"="DSK"
"Dll"="SDMemory.dll"
Click to expand...
Click to collapse
THIS MEANS????
I don't have a sdhc card so it is just in theory it should work within this rom P800w_SEA_ENG_WM6_Upgrade_20070713
and this is no fake ? All the guys are telling it's not working because of hardware limitations and now a cab solves all issues? i am a little bit sceptical.... ....but just ordered one 4gig card...
Edit 11/September:
Does not work on my device. I'm using Meschle's Touch 1.0.
Hello, can't get .cab file to work. I am using a scandisk 4 GB SDHC and using resco 6.10 or ms file explorer. if anyone has this working is there an order to install and register the .dll files and can we have a screenshot so we know that this is not just a mirage. Many thanks
O2 orbit B&B 4.1
kespir said:
No no noooo..
It does not work!!!
After installation of cab, it created a Storage Card folder in root. But this folder does not contain my files... (This appears only on v4.1) I see only "mail, cacheie and temp" folders in this Storage Card folder, and these are not the files on my Card...
Sorry...
So, keep searching for a solution...
Regards...
Click to expand...
Click to collapse
thats not a bug of the pacth, its a bug of B&B 4.1.
When u install the ROM without a SD Card in teh device, it creates itself a "virtual" storage card.
Rename it to "Storage Card 3"
Insert real SD Card, the "Storage Card" should appear in your File Explorer.
Delete Storage Card 3
______________________________
tom_codon voted, that it WORKS? w00t?
SDHC Cards
Installed the driver on a WM6 o2 upgraded Orbit and it doesn't seem to do anything...DOESN't WORK!!
Who voted "YES, it's working" ???
The storage card bug in B&B 4.1 can be solved by deactivating the messaging tab on the today screen, renaming the storage card, resetting and erasing the renamed virtual storage card.
Who are the guys that voted that SDHC works on their devices ???
And for those that think it's not possible because of the hardware: that doesn't seem to be exactly the case. Search other forums on the xda-dev site and you will find out.
These are the guys that voted that sdhc patch works: lepsyfou, lestuan, tom_codon.
...either Tom is pulling our leg or it is good news indeed...
kakainis said:
These are the guys that voted that sdhc patch works: lepsyfou, lestuan, tom_codon.
...either Tom is pulling our leg or it is good news indeed...
Click to expand...
Click to collapse
Sorry.I'm vote wrong.My friend said me it work.Then he said again it not work
sorry i had not read the vote good. It doesn't work.
Greetz
hoedie
This may be irrellavent but it fixed a 4gb gard on a mio A201 running WM6 Personaly i ain't seen it but he says it showing "Storage card size comes up as 3874.91 mb" all he dis was install the CAB file (with his 2gb card in) and then insert his 4gb storage card and reset. no renaming or messing about
No work on Orbit WM6 with 4GB SDHC

4GB SDHC works on my Artemis WM6

I just want to let everyone know that my new 4GB Sandisk Cat2 SDHC works
with my Artemis WM6 after applying the SDHC patch from this forum.
I did a benchmark using PocketMechanic which doesnt make sense to me but It might make sense to others so I attached them here:
I will run Tomtom in DEMO mode overnight (thats how I test TT if it craches after long periods of usage) and report back tomorrow.
continuation...
Update 22 Dec 07:
Found a little bug:
I have MagicSS (free screen capture app) installed. I mapped it to a button on my Artemis so when I want to capture the current screen, I only have to press the button. It works fine.
But when I run Tomtom and press the (MagicSS) button, the original application that the button was assigned to is whats activated. For example, the Camera button activates Camera instead of MAgicSS. Whats worse is when I assign the IE button, It activates IE and Mouse Mode.
I thought it was MagicSS causing the problem so I tried to use Resco Capture It! which comes with Resco Photo Viewer. But the same happens.
I then did a Hard Reset, but Im still having the same problem....
I use an 8GB SDHC since 1 week in my Artemis and works fine with the patch.
Previous 4GB also worked fine.
Olioaglio
sdhc update for amda compact 3 wm6 of t-mobile wm6
hi!
Would u plz help me which files i should install to my artemis to make a 4 or 8 gb micro sd card working in it. should i only copy the files to some directory of the artemis or to run them on telephone?
should i also use uspl b4 doing this?
i have mda compact 3 of t mobile logo; i unlocked it first and then upgraded to the original wm6 of the t-mobile from the site of the dutch t-mobile site.
I read different articles of this forum, but i couldn t grasop any real sollution for the files like 5torage and cab etc.
i already downloaded 3 files namely
sdhcartemis.cab, wm5torage and sdhc_artemisback2original.cab. i also downloaded some artemis touch full wich they assume is with sdhc support files..
i didnot have applied them at all. if i get some help from u then i will try it as u direct me. many thanx in advance.
tulip holland
Hi tulipswat.n I have attached the file that I used. I also downloaded it from the forum.
You dont need uspl.
1. just make sure you have WM6
2. remove your memory card
3. copy the attached file to your MDA (eg: \My Documents memory card)
4. look for the SDHC driver that you copied using file explorer
5. click the file to run then
6. format your SDHC card with FAT32 using card reader
7. put your SDHC memory card
soft reset... and your done!
The same for xda orbit?
Hello this patch is working also for xda orbit?if it's not plz give a link to download a file that make the same thing on xda orbit!Ty
It works flawlessly with O2 XDA Orbit....
Olioaglio said:
I use an 8GB SDHC since 1 week in my Artemis and works fine with the patch.
Previous 4GB also worked fine.
Olioaglio
Click to expand...
Click to collapse
Does it really make an 8GB SDHC work on my artemis running WM6.5 build 21731?
Thanks Man. Works Greatly. Wonderful!!!
Thanks

Asus Mypal A6x6 WM6.1 rom International Edition version 1 (7-6-10)

Yesterday, I decided to give making a non-English rom another try since I was off from work and had little to do. It turns out that with previous attempts, I had a bad file that was keeping the rom from booting. This, aside from perhaps one or two bug fix roms, is the only main release of WM6.1 that I am going to put out for international roms for the A6x6. And yes, non-English WM6.5 roms are in the works.
Thanks to Makuu (especially), Lenny, AstainHellbring, the creators of the tools I used to make this rom, and anyone else that I failed to mention in name who gave me the knowledge to complete this rom.
Asus Mypal A6x6 WM6.1 International Edition version 1
Windows CE version 5.2.21054 (Build 21054.1.6.7)
This was tested on an Asus Mypal A626 (and works). It should work with the A686/A696, but the other models were not tested. Any other models not metioned above WILL NOT WORK.
1st release
Additions
1. Windows Marketplace
2. File Dialogue Changer (but it's in English)
Removals
1. Windows Live (if you really want it, use Windows Marketplace)
download languages include (at the present) German and French
French: http://www.easy-share.com/1912862859/Fr_Asus_A6x6_WM61_1.rar
German: http://www.easy-share.com/1912862918/DE_Asus_A6x6_WM61_1.rar
Polish: http://www.easy-share.com/1912006254/PL_Asus_A6x6_WM61_1.rar
At this time, this will be the only download link. Mirrors will be created in the future (after I give permission).
Instructions
Before you do anything, make sure you have at least a 256mb SD card and a card reader (you can get one at a place like Radio Shack or Office Depot). You also need to install Winrar (found at http://www.rarlab.com/download.htm). Your SD card must be formatted with the FAT16 file system.
To format your SD Card with the FAT16 file system
Step 1: To do this insert the SD Card into the reader and go to "My Computer".
Step 1a: BACKUP YOUR FILES before you start!!
Step 2: Right-click the drive letter of the SD Card reader (differs for each computer, probably either E:\ or F:\ or G:\) and click "Format".
Step 2a: Don't worry about any of the options except for file system, choose "FAT"
Step 3: Click "Start" and wait until it is done
Step 1: Get (OS) rom image
Step 2: Extract files to any folder on hard drive using Winrar
Step 3: Go to the folder where you extracted the files in the RAR archive
Step 4: Make sure that the filename is "CANNES_A_WM6.img"
Step 4a: if the img file it's not exactly "CANNES_A_WM6.img", rename it to that
Step 5: Format the SD card if you haven't already done so using the instructions above
Step 6: Copy the img file to the SD card, see step 6a
Step 6a: Make sure that the img file is the ONLY file on the SD card after formatting
Step 7: Take SD Card out of SD Card reader and put it in the a6x6
Step 8: Make sure that the a6x6 is plugged in via ac adapter before doing the next few steps
Step 9: activate SD Loader using the following instructions {
Step 9a: Hold down the power button and enter button (that's the button in the center of the d-pad)
Step 9b: Double tap the soft reset button while holding the other 2 buttons
Step 9c: After double tapping the soft reset button, keep the other 2 buttons held until a blue screen comes up that says something like Asus Cannes flashing utility
Step 9d: Wait until the process is finished (it's near the end when it says "writing private")
}
Step 10: At this point, your a6x6 should reboot on its own
Step 11: enjoy your updated rom
If you have any questions, feel free to just post or PM me.
As I release new roms, if you have a support question, please give me the rom version so I know what rom you are working with. You can get the rom version from the filename of the rom pack.
Example: Asus_A626_WM614_1
A626 = device (most often it will be A626, will rarely be different), WM614 = os version, 1 = release #
--reserved--
-bump- for better accessibility
Sweet! DLing German ROM now. Thanks a lot! Will replace Windows Mobile 6.5.3 with this one because I prefer the 6.1 look and feel on my A686.
German ROM is running very well and w/o any problems. BT, GPS, etc. it's all there. Thank you so much! Will donate you some beers via PayPal later.
Flashing, testing french flavour on A696 right now...
A Hebrew Version
Hi Steven,
May you will try to make a HEBREW version?
If you will, it would be great!
Thanks a lot and keep the amazing job!!!
Everything looks right, good work !
I have a Hebrew version built and ready for testing (just as soon as I fix the partitions on my testing SD card; I'm also currently testing linux out for the A6x6, but things aren't going too well)
Polish rom is up and ready for download
Is there possibility to have 6.5.3 internationalized? I can translate it by myself
Yes, there are international versions of WM6.5. It's just that I haven't had time to build roms (I just started college). I should have time over the weekend to put out some test roms for WM6.5.
Update: just got my first international WM6.5 rom working; will upload soon once I find time in busy school schedule (language of rom is German)
Steven855 said:
download languages include (at the present) German and French
Click to expand...
Click to collapse
First two links (french and german) are broken, any mirrors ?
fixing link right now, thanks for letting me know
Another vote for the Hebrew version
Hi Steven,
Amazing work, I am playing with your ROMs for quite some time, but always return to Asus due to need for Hebrew support.
Hebrew 6.1 will be awesome.
Thanks.
Hi all! I am trying to install wm6.1 german (link on previous page) on my a636n with wm5 german lang. and i follow every single step like on prev. page and my asus stucks at asus heart of technology screen, i dont have ac charger by the way but battery is 70 % full. also i dont have the usb. i wouldnt do this if i could run newer apps on wm5 but... some advice please, (i cant buy nor ac charger nor usb for it).... greetings
mladenks said:
Hi all! I am trying to install wm6.1 german (link on previous page) on my a636n with wm5 german lang. and i follow every single step like on prev. page and my asus stucks at asus heart of technology screen, i dont have ac charger by the way but battery is 70 % full. also i dont have the usb. i wouldnt do this if i could run newer apps on wm5 but... some advice please, (i cant buy nor ac charger nor usb for it).... greetings
Click to expand...
Click to collapse
If you do indeed have an Asus Mypal A636n, please save yourself the effort (and headache) of flashing my rom. I clearly state on the 1st post that this rom will NOT work on ANY models other than the Asus Mypal A626, Asus Mypal A686, or Asus Mypal A696. If you do try to flash it, YOU WILL BRICK YOUR DEVICE!!
thanks a lot, works fine on french A696 ! great working !
kitrucid said:
thanks a lot, works fine on french A696 ! great working !
Click to expand...
Click to collapse
hello,
i just tryed your version of 6.1 mobile french.
i found 2 big problem:
1-> i can't uninstall any program installed on the system it says it's not completly removed, but it's not removed at all!
2-> i can't go to "task manager" because it's launching "task manager" and close just in 1 second! i can't see what's running on my pda a696.
please let me know what can i do? how can i return to win6.0 if you haven't the solution.
please answer to my email [email protected].
thanks a lot for your support, pierre from france

Categories

Resources