Related
I recently upgraded my O2 Xda Exec with the imate JJ rom (ROM Version: 1.30.82 WWE). But after a hard reset, I keep getting the following error:
Code:
Can not run on this device.
Upon investigating, I have discovered that the pocket arabizer cabs are installed during the customization after a hard reset. The similar rom (and the mentioned cabs) are working flawlessly on my other universal (imate jasjar) but on my O2, i keep getting the above error (i.e. can not run on this device). Is there a way to get the arabizer cabs to working nicely with my O2? Help in this regard would be appreciated.
help, please help. just say something. just kiddin'
hopefully, someone will come along and offer some valuable help.
T-Mobile is doing the same thing
My T-Mobile MDA Pro is doing the sme thing, it must be a way to tell the ROM that my T-Mobile is a JasJar...and I have used the "no_ID" and it did not work...
HELP
The imate roms (dont know if only from the Jasjar) have something builtin (don't know if cab file in extrom or in the rom itself) that only allows installation on imate jasjars. I think its some sort of list or program which checks the imei.
My observations so far are:
1. I have tried a custom extended rom, specially designed to avoid any cabs that might check the imei. This meant using a custom config file and autorun file from O2.
2. Only IMEI checking cab I have found so far is the 'Default_CAAVPPC_IMEI_2.6.80_range.cab' -- it is CA Antivirus software. I think it checks the IMEI.
3. I have tried with certain telco provided cabs (e.g. Mobily, Etisalat_UAE, etc.), to see if this works. It doesn't.
4. What does Install_tsk.exe do?
5. I have tried with different rom, but extended rom from imate JJ, but that doesn't work either.
6. Is there a way to fix this problem? I have seen this problem with several other people in this forum, but no concrete solution is found yet.
7. Can somebody else confirm that, indeed there is some IMEI checking in the imate roms?
8. being able to use the imate JJ roms on O2 indicates that there is no IMEI checking in the ROM itself.
9. Help is desparetly needed. :roll:
S.D.
JasJar on T-Mobile
I have tried everything since I got my T-Mobile and I installed like 100 ROMs trying to make my T-Mobile MDA Pro thinks that it is a JasJar...but no luck...
I have installed the WWE JasJar with no problem, I think the problem is installing the ME version with Arabizer and the AntiVirus software...and yes it does check the IMEI number...
My T-Mobile now officially an O2 but it seems like it refused to think that it is a localized version of the iMate JasJar.
Is there a way that makes my T-Mobile thinks it is a JasJar????
this seems to be an issue with a lot of people. can we have some experts to help us out?
IT CAN NOT BE DONE...SORRY
somedesi said:
this seems to be an issue with a lot of people. can we have some experts to help us out?
Click to expand...
Click to collapse
I think that the "Arabizer" developers had locked in the software to work only on the iMates...with specific IMEI numbers, I have installed the WWE ROM on my T-Mobile and it works fine but when I install the ME ROM it does not work...
I AM GIVING UP...
Never understood why we have to use 'MaUpgradeUt_noID.exe' always (I would say), specially in some situations...
For instance if we have an original Qtek WWE ROM (Universal_Qtek_WWE_11364_151_10300.exe) installed and try to upgrade to the next Qtek WWE official AKU2.0 ROM, why does the 'ROMUpgradeUt.exe' keeps giving 'Country ID Error'!?
- Device is the same Qtek and not locked to any Telco Operator.
- Both ROMs are official WWE and produced to the same device.
Annoying
I believe it would be easier to use 'ROMUpgradeUt.exe', as 'MaUpgradeUt_noID.exe' was not originalli designed to UNI, and maybe thats why we experience some difficulties with it. Even with bootloader upgraded to v1.01 I have to run it at least twice (Ok with v1.00 bootloader it was much harder).
I've read through the WWE thread and still haven't managed to find people's experiences with this ROM and their UK Orbit's.
Can people please post any issues, and more importantly if I'll brick my Orbit (as from the shop so unsure whether CID locked / unlocked) if I follow the steps in the original thread?
Thanks.
I had no luck. I'm waiting for WM6 ROM from O2 UK to get the phone working again as I can still access the bootloader.
Same for me. Followed all the steps, but still my phone bricked. Mine was CID locked, but because there were several succesful upgrades on CID locked devices I also tried it. I'm also still able to enter bootlloader, so just have to wait for retail WM6 ( have no RUU signed update to restore my device )
I moved from a Orbit with a HTC P3300 Rom (CID Unlocked) to a WM6 Bebe Rom at the first attempt.
It's so much quicker than the WM5 Rom. It's a lot more stable.
If you want me to post the steps and a Apps I've tested I'll do so tomorrow.
I couldn't get Bepe's to load with the boot loader, but the next part with the windows.nb file worked..........
Sort of, I think the bluetooth is not working properly as I can't create a port to allow me to sync with my pc. Apart from that it is working fine. (Touch wood)
doesn't seem worth the risk...
sounds to me like it isn't worth trying at the moment then! shame cause i want to get wm6 running but would rather not have a bricked device ... and the odds look high!
come on o2... where's our official rom?
I've just upgraded my O2 Orbit and it worked fine. CID unlocked it with IMEI-Check and then followed Bepe's instructions.
mmmm... fair enough but i just don't wanna shell out $20 to get a cracked rom...
If I am not mistaken is it not £20 as opposed to dollars I would pay a tenner but like you I will wait for £20
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
itschase said:
Does anyone know if HTC will require an actual P3300 IMEI in order to download the WM6 update when and if they release it?
Click to expand...
Click to collapse
probably, they will require you to give this to prove you have a HTC branded device. TBH they shoudl provide a ROMforAll no matter what provider you have you should be able to upgrade to a clean manufacture rom.
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
phsnake said:
for those who have O2-Orbit UK and can access only bootloader, did U try to flash german WM6? just run file downloaded from german o2 (without any hexedits etc. just run xdaorbit-windows-update.exe). I think it should work, because CID lock is not to lang version, but for operator (02_01) and both UK and DE Orbit are ARTE2000. Worth a try. If it works let it boot to calibration screen plug usb cable and reflash using bepe's ROM. Let us know. I'm not sure if it'll work, I'm CIDunlocked.
Click to expand...
Click to collapse
Do you think the same would apply if you Hex edited ARTE10000 to ARTE2000? Sily question, I know, but is that the only level of security that actually looks for model ID?
in o2 ger image its already ARTE***** so u dont need to change anything (it means it shoul work for arte100,110,1000,200 models maybe 300 as well - htc love) But this is looking only for ModelID, in ROmUpdate Util it checks somehow for ModelVendor/Operator - addr:x0003BA6C - password BsaD5SeoA
I also "BRICKED" my Orbit. I am also the impatient type. Why wait for O2 to release a ROM image? I have spoken with O2 directly. My friend even works for their technical division. As far as I have been able to find out, from friends and his friends at O2, there is NO O2-UK WM6 in the pipeline at the moment. Not enough users apparently. When I found out this I put my Orbit into O2 shop for repair. It was flashed under warranty as a software fault. I have since CID-unlocked it and flashed to WM6.
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Shand359 said:
Absolutely amazing. WM5 to WM6 is night and day. So much faster and a lot nicer looking too.
Click to expand...
Click to collapse
My experience: O2 Orbit bought in CZ. My way was: CID unlock -> try-and-brick (...) -> German original O2 WM6 ROM (with bootloader) -> Arte WM6 from bepe.
I am very happy now (extremly stable!) and at this moment I do not plan even upgrade to a new ROM.
Btw solved the issue with localization (keyboard only - Resco works perfectly) and external keyboard support for my beloved iGo Sierra bluetooth keyboard: AE Keyboard mapping SW solved my needs
MY experiences
Being a corporate O2 customer, when I bricked my Orbit they sent me a new one and said I could do what I wanted with the old one.. it's still a brick, having tried every suggestion on this forum!!!
MY new one, however, is running Bepe's WM6, having run the USPL first.
I tried Black&Blue, but found it drained the battery too quickly, and I reall ydon't need all the extras it comes with. I've got Bepe's WM6 running brillianlty - all I add is a cracked version of TomTom 6.02, which runs perfectly, BatteryStatus purely for a power display, no overclocking needed, and TodayAgenda for improved calendar on Today.
I use push mail to connect to my office exchange server, and have all my personal mail ending up at fastmail.net, where I connect to using IMAP - deleting from the phone deletes properly on the IMAP server now, unlike on WM5, so you really can have a synchronised mailbox usin IMAP and a free account at Fastmail.net...
I also have JetwareMobile installed to enable me to use my Siemens HKW600 Car kit (£40 on ebay, superb!), and I have some Sony DR-BT30Q bluetooth headphones which work perfectly...
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
jamin100 said:
I have a CID LOCKED UK o2 Orbit. I ran the USPL program by Prof and then Bepe's WWE ROM.
worked fine and WM6 is great!
Click to expand...
Click to collapse
Yes, but that doesn't work if you've already bricked your Orbit
Does anyone happen to have a WM5 ROM to restore to if the WM6 goes horribly tits up - I'm not overly looking forward to the idea of not having the pride of the mobile fleet working... the humiliation!
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!
No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!
I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.
Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...
Thanks for the replies! Anyone else with a positive experience?
I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?
Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...
For those who successfully upgraded their P3600 to WM6, what technique did you use?
I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.
PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.
Thanks Thomas,
That's great information!
generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....
I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.
if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.
I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.
Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580