Related
I have download two nb rom files and make nbh file with NBHgen and sample.txt (only OS and extended rom). After that I run modifided ruu updater with autodetecting SPL and start the update. I have to mention that my hermes was CID unlocked and I have flashed hundred of devices before. After about 23% updater stoped with an error message and want to start recovery mode... So I restarted my hermes but it not came up. Few seconds later my computer hangs on with blue screen message. Hermes never came up, even to bootloader. KITL mode also don't work. Charging too. Computer don't detect anything :-( Anyone have any suggestions? What could happend? I have not updateing SPL so why it won't start to bootloader?
ell82 said:
I have download two nb rom files and make nbh file with NBHgen and sample.txt (only OS and extended rom). After that I run modifided ruu updater with autodetecting SPL and start the update. I have to mention that my hermes was CID unlocked and I have flashed hundred of devices before. After about 23% updater stoped with an error message and want to start recovery mode... So I restarted my hermes but it not came up. Few seconds later my computer hangs on with blue screen message. Hermes never came up, even to bootloader. KITL mode also don't work. Charging too. Computer don't detect anything :-( Anyone have any suggestions? What could happend? I have not updateing SPL so why it won't start to bootloader?
Click to expand...
Click to collapse
did you have hardSPL when you flashed it?
ell82 said:
I have download two nb rom files and make nbh file with NBHgen and sample.txt (only OS and extended rom). After that I run modifided ruu updater with autodetecting SPL and start the update. I have to mention that my hermes was CID unlocked and I have flashed hundred of devices before. After about 23% updater stoped with an error message and want to start recovery mode... So I restarted my hermes but it not came up. Few seconds later my computer hangs on with blue screen message. Hermes never came up, even to bootloader. KITL mode also don't work. Charging too. Computer don't detect anything :-( Anyone have any suggestions? What could happend? I have not updateing SPL so why it won't start to bootloader?
Click to expand...
Click to collapse
Don't worry about it, if you have hardspl you can flash it again
okk said:
Don't worry about it, if you have hardspl you can flash it again
Click to expand...
Click to collapse
How do I can if it's not even start to bootloader?? I'm almost confident it was hardspl.
ell82 said:
How do I can if it's not even start to bootloader?? I'm almost confident it was hardspl.
Click to expand...
Click to collapse
You seem to have a dead battery, you need to charge it before you can flash your device again.
For clarification, if your battery is in fact dead, you won't be able to charge it with your own phone in it's current state (failed flash). You'll have to put the battery in another phone to charge or borrow someone else's battery.
shafez said:
You seem to have a dead battery, you need to charge it before you can flash your device again.
Click to expand...
Click to collapse
ell82 said:
I have download two nb rom files and make nbh file with NBHgen and sample.txt (only OS and extended rom). After that I run modifided ruu updater with autodetecting SPL and start the update. I have to mention that my hermes was CID unlocked and I have flashed hundred of devices before. After about 23% updater stoped with an error message and want to start recovery mode... So I restarted my hermes but it not came up. Few seconds later my computer hangs on with blue screen message. Hermes never came up, even to bootloader. KITL mode also don't work. Charging too. Computer don't detect anything :-( Anyone have any suggestions? What could happend? I have not updateing SPL so why it won't start to bootloader?
Click to expand...
Click to collapse
First, it souds like there's something wrong with your computer if you get a blue screen. You might wanna try rebooting your computer first. Use the AC wall adapter to charge your phone if you can't charge it on the computer. If you are able to charge the phone with the AC walll adapter, see if you can go into SPL or KITL. If you were able to get into the bootload or KITL, you will be fine.
The battery was charged before update to 100% so for sure it's not empty... :-(
Tell more about the PC
Most likely the blue screen is related to the USB driver. There should be a hex code displayed. What was that?
Also, please share OS version, and I don't want to assume ActiveSync version either.
We've got to fix the PC first. Have you tried Pof's "How to unbrick your Hermes" steps?
Try removing the battery for a while (as long as you can stand to), like at least 10 minutes, then put it back in.
Let us know just a bit more about your configuration.
ell82 said:
The battery was charged before update to 100% so for sure it's not empty... :-(
Click to expand...
Click to collapse
OS ver is Windows 2003 Enterprise R2 trial version, ActiveSync of course 4,5.
Pof's "How to unbrick your Hermes" steps will not work becouse my hermes is dead and even don't wont boot to bootloader or KITL... Removing battery for few hours do nothing. I'm not at home now, so I don't try to bring it back to life last few hours but I will soon.
ell82 said:
OS ver is Windows 2003 Enterprise R2 trial version, ActiveSync of course 4,5.
Pof's "How to unbrick your Hermes" steps will not work becouse my hermes is dead and even don't wont boot to bootloader or KITL... Removing battery for few hours do nothing. I'm not at home now, so I don't try to bring it back to life last few hours but I will soon.
Click to expand...
Click to collapse
Hmm...if you can't even get to the bootloader or KITL..your phone is basically dead.
I have written in first post that it's not boot to bootloader... Anyway, how is it possible to brick bootloader while I was flashing only OS and extended rom?
sample.txt
please show your sample.txt.
ell82 said:
I have written in first post that it's not boot to bootloader... Anyway, how is it possible to brick bootloader while I was flashing only OS and extended rom?
Click to expand...
Click to collapse
It's possible when you use the custom RUU Updater and you choose the wrong option, it will start to flash your bootloader first then the OS.
Does it includes IPL flashing ?
See this thread by Olipro
http://forum.xda-developers.com/showthread.php?p=1226412#post1226412
ell82 said:
I have download two nb rom files and make nbh file with NBHgen and sample.txt (only OS and extended rom). After that I run modifided ruu updater with autodetecting SPL and start the update. I have to mention that my hermes was CID unlocked and I have flashed hundred of devices before. After about 23% updater stoped with an error message and want to start recovery mode... So I restarted my hermes but it not came up. Few seconds later my computer hangs on with blue screen message. Hermes never came up, even to bootloader. KITL mode also don't work. Charging too. Computer don't detect anything :-( Anyone have any suggestions? What could happend? I have not updateing SPL so why it won't start to bootloader?
Click to expand...
Click to collapse
I forgot to mention that there's no need to include the extended rom. You can just ust the OS only and those extract CABs will run automatically when your first initialize your device. All the CABs in the extended rom is also in the \windows directory and there's a preconfig.txt file to specifiy which CAB to run. There's also a chance that you specify the wrong range in your sample.txt file which will caused the rom written in a different address and bricked your device.
sunlip said:
Does it includes IPL flashing ?
See this thread by Olipro
http://forum.xda-developers.com/showthread.php?p=1226412#post1226412
Click to expand...
Click to collapse
OS only don't have IPL in there unless you are doing a full rom upgrade.
My sample.txt looks like this:
HERM100
SuperCID
2.05.255.1
WWE
100,00_IPL.nb
200,01_SPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
700,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
Click to expand...
Click to collapse
and my RUU updater marked this options before flash (see atatchment).
You created a NBH with a header containing IPL, SPL, splashes, and radio... and you only put OS and ExtROM in the NBH. You overwrite IPL & SPL with EMPTY data. Device is dead. Your "sample.txt" should have looked like this:
Code:
HERM100
SuperCID
2.05.255.1
WWE
700,04_ExtROM.nb
400,06_OS.nb
pof said:
You created a NBH with a header containing IPL, SPL, splashes, and radio... and you only put OS and ExtROM in the NBH. You overwrite IPL & SPL with EMPTY data. Device is dead. Your "sample.txt" should have looked like this:
Code:
HERM100
SuperCID
2.05.255.1
WWE
700,04_ExtROM.nb
400,06_OS.nb
Click to expand...
Click to collapse
If I may be so bold.. Your machine is a complete write-off. It is dead forever. Get it replaced..
I had a small problem:
I want to upgrade ROM from 1.35.401.3 to 1.93.401.2...
I download the official .exe from HTC:
Diamond-QMR-RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Dia mond_52.29.25.12_1.00.25.05_Ship
using the S/N from the back of my PDA
... it work till 34%, then it appears UPDATE ERROR:284
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode."
What do you recommend to do?
I repeated the process 5 or 6 time, the same stop, at 34% and even recovery is useless
Please help...
there are a couple of things you can try...
1st off, put the phone in bootloader mode (hold "volume down" button and press reset with pen) then flash using a windows XP machine with no running services such as Anti Virus/firewall etc.
if not, try hard SPL developers edition, and then flashing it...
Amz
amzchhabra said:
if not, try hard SPL developers edition, and then flashing it...
Click to expand...
Click to collapse
That would be impossible in bootloader mode using the current toolchain.
The Hard SPL uses a soft SPL that has to be loaded into RAM from within Win CE.
This Soft SPL forces the device to think that it's CID unlocked, and letting the actual Hard SPL flash to the device.
Maybe a hard reset would help:
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
Good luck to you friend.
May be the file u have is corruped, try another ROM!!
Which OS did you use to upgrade from?
Have you tried to use a PC with XP (proffesional) with activesync 4.5 installed?
if all fails:
-kill wcecomm.exe on the PC (with taskmanager) (or disable activesync)
-put Diamond into bootloader..
-Run the official RUU again.
(worked for me on other devices too.. )
All is not lost..
gabib77 said:
I had a small problem:
I want to upgrade ROM from to 1.93.401.2...
I download the official .exe from HTC:
Diamond-QMR-RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Dia mond_52.29.25.12_1.00.25.05_Ship
using the S/N from the back of my PDA
... it work till 34%, then it appears UPDATE ERROR:284
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode."
What do you recommend to do?
I repeated the process 5 or 6 time, the same stop, at 34% and even recovery is useless
Please help...
Click to expand...
Click to collapse
Hi gabib77.
As long as you can get the coloured bootloader screen all is not lost, you can still flash your Diamond in the bootloader mode, i.e run the rom update from your PC as normal.
I would first suggest you reflash back to the original rom, try here http://forum.xda-developers.com/showthread.php?t=399680, I am not sure what the "QMR" info you stated on the upgrade rom means, but the second link from the HTC Diamond ROM's List is for the WWE version (1.35.401.3 WWE)
If you cannot flash your Diamond in bootloader mode, then try a hard reset first as mentioned on this thread first.
If you all goes ok then go to http://modmydiamond.info/ for more info on flashing.
Good luck.
I solved the problem... my problem happened because I try to upgrade from 1.35.401.3 to 1.93.401.2...
I put the official 1.37.401.2, then I upgraded to 1.93.401.2 WWE and everything is perfect now...
Thanks everyone for the help
Hi there, I'm Italian I'm here because your'e the only one on this planet who can help me.....so sorry for my english.....
I had some trouble with my diamond, the touch screen is no longer working so I have to send it back to htc, now I have to restore original rom and spl.....
I installed olinex 1.40 and the last original italian rom 2.03....
Now I downloaded my former rom (1.93.772) from italian server, I installed it and everything seemed to be right, (I can't check it because the diamond blocks me at the aligning screen, the touch screen is broken and I can't start the phone...the aligning screen appears to me forever and there's no way to bypass it)...
Then I downloaded the original spl 1.93 from your server...I cant use active sync because I can't start the phone so I have to work in boot mode.....I followed carefully the procedure, that is quite easy, but there is no way to remove the olinex 1.40, the process starts, it reachs 100%, but when i check the spl is always the 1.40 olinex....and restore original spl...I try also the usb trigger mode, with the spl putted as dimndimg.nbh...
Please help me!!!!!!!!! I' going crazy!!!!!
Thank you very much for the attention...
DAVID
do you hear me?
hi
hi, did you check out this? http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20 see if that helps you.
I read everithing and now I'm a sort of diamond technician, but I cannot solve this problem, I can only flash in bootloader mode cause the telephone cant initialize windows, it' blocks in the aligniment screen and can't go on, so maybe the bootloader mode isn't strong enough to by pass the write protection of the 1.40 olinex and overwrite the hardspl...HELP HELP HELP
I'got the same issue, you have to install a rom !! and use ActiveSync in order to get the SPL1.93 ! I think in bootloader mode, you can't change the SPL!
Good luck
Freaky, I have the same issue it will not remove no matter what.
HTC have sent mine back, they say the HardSPL 1.40 OliNex damages the mainboard and causes touch screen failure! They want £230 for a new one
If you find out how to remove let me know, I've flashed all sorts and no luck it still says it.
Andrew
PS) I have activesync working with a failed touch screen (stuck on the align screen window), copying and running stock 193 in /internal doesn't change it. When I try:
http://forum.xda-developers.com/show...7&postcount=20
it sits at 0% then fails. The other program they mention to force it uinto bootloader I can' run obviously because the touch screen is broke.
miscioidi said:
Hi there, I'm Italian I'm here because your'e the only one on this planet who can help me.....so sorry for my english.....
I had some trouble with my diamond, the touch screen is no longer working so I have to send it back to htc, now I have to restore original rom and spl.....
I installed olinex 1.40 and the last original italian rom 2.03....
Now I downloaded my former rom (1.93.772) from italian server, I installed it and everything seemed to be right, (I can't check it because the diamond blocks me at the aligning screen, the touch screen is broken and I can't start the phone...the aligning screen appears to me forever and there's no way to bypass it)...
Then I downloaded the original spl 1.93 from your server...I cant use active sync because I can't start the phone so I have to work in boot mode.....I followed carefully the procedure, that is quite easy, but there is no way to remove the olinex 1.40, the process starts, it reachs 100%, but when i check the spl is always the 1.40 olinex....and restore original spl...I try also the usb trigger mode, with the spl putted as dimndimg.nbh...
Please help me!!!!!!!!! I' going crazy!!!!!
Thank you very much for the attention...
DAVID
Click to expand...
Click to collapse
In order to switch from 1.40 to 1.93 HARD SPL, you must you the jump spl program. It's in my signature. Also read the txt included for the instructions.
Let me know how it goes...
band27 said:
In order to switch from 1.40 to 1.93 HARD SPL, you must you the jump spl program. It's in my signature. Also read the txt included for the instructions.
Let me know how it goes...
Click to expand...
Click to collapse
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab
snoopy20 said:
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab
Click to expand...
Click to collapse
First plug phone into computer via active sync....
Then:
Copy the following files to the Diamond root directory
"Copy JumpSPL.exe & "copy SSPL"& sspl-1.01-reloc-mod.nb
Then: "execute Diamond SPL now - screen may trun black"
Then: "run DiamondCustomRUU.exe to flash any HardSPL
What is "copy SSPL" ??
snoopy20 said:
What is "copy SSPL" ??
Click to expand...
Click to collapse
Copy means either to right click and select copy to then past it to the root of the diamond directory or you can choose to drag this file to the diamond directory. Then continue to copy the other files.
Another way is to just start with the Diamond-SSPL.exe file and it will tell u to copy these files one by one. Make sure that you are activesynced prior to started this.
What I mean is WHAT IS sspl.exe
It's not in your magic zip file.
And when I find it, how can (I / We) execute it with failed touchscreens?
Still getting ...
>> prun JumpSPL.exe ...
ERROR: CreateProcess failed with errorcode = 30123
- UNKNOWNERROR: 0x000075ab
I'm having the same problem tryng this stuff...does't work at all....I sent 2 private message to olipro but no response....Is there someone out there who can hepl me??????
is there any absurd rom using just the button of the pda excluding the touch screen??????
You must flash in bootloader mode and run ROMUpdateUtility.exe in "C:\ROM" with file "RUU_Signed.nbh" 1.93 version in his directory (C:\ROM).
Use Windows XP and cable miniUSB original and Activesync of course.
1)Use Activesync conected.
2)Copy ROMUpdateUtility.exe and RUU_Signed.nbh (HardSPL 1.93)
3)Enter in bootloader mode
4)From "C:\ROM" run ROMUpdateUtility.exe
Leoarg....I can't activesync the diamond in bootloader mode....I can activesync only if I start the diamond in normal mode....when it reaches the aligniment screen it stops and sinconize
miscioidi said:
Leoarg....I can't activesync the diamond in bootloader mode....I can activesync only if I start the diamond in normal mode....when it reaches the aligniment screen it stops and sinconize
Click to expand...
Click to collapse
mmmm, Ok. What problem!
Why remove the 1.40 is so hard?????.....why flashing in bootloader mode doesn't bypass the overwriting protection?? why olipro is not answering my private message?
As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!
Hi all,
I wanted to put a new ROM on my Touch Diamond p3700, and managed to bust it.
I followed the MTTY guide from here
http://forum.xda-developers.com/showthread.php?t=416211
I got through the steps OK, but at some point, after restarting the device I noticed that it stop booting.
It would display only TOUCH diamond, and that's it. No other red numbers with RGD.
I tried a hard reset. Nothing. I also did a hard reset with a moviNAN format, and nothing. (though I think this might have made matters worse)
I tried a RUU, and it stays at 0% for a couple of minutes and then gives an error on the PC.
I tried an original ROM, but it says Not allowed for this Vendor ID (goes up to 1%).
I tried Hard SPL 1.24 a couple of times but this also stays at 0% for a couple of minutes and then gives an error.
I am totally out of ideas, but I'm only an extreme beginner, so I do hope there will be a solution.
Any help would be greatly appreciated.
Thanks.
try with HSPL 1.93
hspl 1.93
Hi.
Thanks for the reply
I assume you're talking about this
http://forum.xda-developers.com/showpost.php?p=9246383&postcount=2
I downloaded the archive, extracted it.
As I said, the phone doesn't boot, so I can't connect it to activesync,
but I did go to bootloader (red green blue screen), inserted the cable and showed USB.
Reading your steps I saw that I might have missed the hspl step inside the MTTY tut. So basically I did the mtty part without the hspl.
I connected the phone to the PC, it sais USB, I ran ROMUpdateUtility.exe, the grey screen appeared with 0%, stayed like that for 5 minutes and program gives an error that it can't communicate.
hexer4u said:
Hi.
Thanks for the reply
I assume you're talking about this
http://forum.xda-developers.com/showpost.php?p=9246383&postcount=2
I downloaded the archive, extracted it.
As I said, the phone doesn't boot, so I can't connect it to activesync,
but I did go to bootloader (red green blue screen), inserted the cable and showed USB.
Reading your steps I saw that I might have missed the hspl step inside the MTTY tut. So basically I did the mtty part without the hspl.
I connected the phone to the PC, it sais USB, I ran ROMUpdateUtility.exe, the grey screen appeared with 0%, stayed like that for 5 minutes and program gives an error that it can't communicate.
Click to expand...
Click to collapse
there is no HSPL step to perform in mtty mode. go to bootloader and report back the SPL version you have.
there is no reason you shudnt be unable to format. maybe you might need a jumpSPL if ur previous spl is hard spl-ed
In bootloader is says:
DIAM 100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
hexer4u said:
In bootloader is says:
DIAM 100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Click to expand...
Click to collapse
you are still having the stock SPL...
lets get you HSPL...give me a few minutes while i come with attachements and instructions
download+unzip to C:\ (recommended)
- connect ur device in bootloader mode
- dont do mtty at this stage
-run the DiamondCustomRUU.exe
report back
ruu err
I get this
Code:
ERROR[262]: UPDATE ERROR
The ROM Update Utility has encountered communication erros during the update porocess.
The program will guide you step-by-step to recover fomr the errors so you can continue witht the update
hexer4u said:
I get this
Code:
ERROR[262]: UPDATE ERROR
The ROM Update Utility has encountered communication erros during the update porocess.
The program will guide you step-by-step to recover fomr the errors so you can continue witht the update
Click to expand...
Click to collapse
did u try flashing this HSPL?
whats ur current location so i can recommend a flash of stock rom.
I'm in Romania. My phone was locked on Vodafone.
What do you mean "flashing this HSPL"? This error I get when running DiamonCustomRUU.exe in the archive you posted. It starts the progress bar on both PC and phone, stays at 0% and after 5 minutes, it gives that error.
okay. download this. and run the diamond-sspl.bat
if it runs successfully and ur screen turns black...then run DiamondCustomRUU.exe again to flash SPL 1.93
if the batch file does not run let me know...
btw i wil be here till we can sort this out
I connected the device in bootloader. Shows USB.
I ran diamond-sspl.bat
and says:
Warning: no device connected.
Waiting for device to connect...
A window pops up, and says if I want to retry. Hitting yes just pops again.
So basically it says that it can't copy whatever it needs on the device because it's not connected. But the device is connected in bootloader and says USB.
okies....lemme make a cross check of the HSPL on my device and report back
in the meantime, do you have your STOCK ROM? the original rom that came with your device.
if you dont, but still know the rom version to download, check here....
http://shipped-roms.com/index.php?category=windows mobile&model=Diamond
in the event we cant proceed any further, atleast we can recover ur device to start up again with batch file...
Try this version of HSPL which allow a temporary SSPL on ur device in order to allow a transition of SPL..
as usual report back. this is the last step...after this if there is no progress we may have to resort to stock rom and then start at step 1.
btw HSPL 1.93 confirmed working on my device.
The same issue. Error 262.
Isn't the problem somewhere in the communication between the PC and device?
When I run ROMUpdateUtility.exe the device does go to the grey screen with progressbar at 0%, but that's about it.
I don't have my original ROM, and I don't know the version,
but I think this should be it
RUU_Diamond_HTC_WWE_EastEurope_2.03.479.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
You can try restarting your PC and then try to confirm any USB conenction problems.
But if on the device it appears USB in the bottom half of the bootloader screen it means the connection is okay.
Now this is a flash (see attachement) i only use as a last resort. If this doesnt flash, consider downloading the rom file you jus mentioned and flash it...
Download the attachment and run the .exe file. Follow the steps...if it works...try flashing any HSPL u have downloaded.
also try this link from htc.
http://www.htc.com/ro/SupportDownload.aspx?p_id=133&cat=2&dl_id=483
input ur device serial (which is under ur battery) and see if u can download. this is more direct approach to download the correct rom file for ur device.
YES!
Fixed it.
I switched USB ports, left the default driver (2007, not 2004 as was said in MTTY), used the ROM I said above and it worked.
Thanks a lot for your assistance.
good!
and if ur up for another try. then start with the attachement HSPLwSSPL
dont do any mtty. jus try to see if u can flash HSPLwSSPL...
but if ur done for the day, i wish u a rest well earned.... hehe...
anyways feel free to drop a PM in my inbox shud u decide...