how to use VitoCopyPaste - HTC Excalibur

hey guys, i downloaded this program, but i cant seem to figure out how to copy and paste. i thought u just held down the joystick key, yet that doesnt seem to be working (yes i clicked on teh icon and the program is running) thanks
omar

The program should install itself so that you don't have to do anything to launch it when your phone boots. The only indication you have is a rectangular yellow box that pops up after your get to main screen that says 'the application is running'. Once it does, keep the center button in the D-pad pressed for 3 or 4 seconds and the menu should pop up. One thing to note that it doesn't always work in all applications.

it doesn't work for me, either - no way to activate it.
hardware: o2 xda cosmo running original wm5.0 (O2 branding)

i cannot figure out how to use it either...

Related

Alternative to JogButton

I have been using JogButton for years and love the functionality it provides. I have just recently purchased the SX66 (HTC BlueAngel) and JogButton doesn't work. (It just holds on the first entry). Are there any more compatible programs available?
Thanks!
JogButton does work on the BA, I use it every day.
What do you mean by "Holds on the first entry" ?
For me, I set the button to the Left (Normally Start Menu) button on the d-pad.
Tap it once to start cycling, again to stop when item you want is listed.
At what point does this fail for you ?
Ok, I had it programmed to the Windows Media button. It would just hang on the first item and not scroll anymore. I just tried it on the contact button and it does indeed work.
What do you put in to replace the Start Menu command?
Thanks,
Scott

portrait to landscape screen switch how?

I've now got my XDA IIs and let it put O2 activeon to start with.
had a look,
then hard reset and got rid of it.
great
any problem is, no tool to go from portrait to lanscape screen orientation.
how does one get this back?
Select start, settings, system tab then select "screen" botom RH icon from here you can select screen oriantation - I know its not an on screen short cut but at least it gets it back for you, I wouldn't put the O2 active on the device it caused me nothing but trouble, I fail to understand why O2 sell the device with a rubish software load - Mike
Aother way if you want an on screen icon is to load up Omega One Batery Pack Pro. This will put the battery strength meter back onto the screen as well as other useful information, but in addition it loads "programe Bar" from here you can have short cuts to practically anything on the device - I have just tried it so I know it works - Mike
I've mapped my t-zones key (3rd from the left on the bottom row) to flip orientation.
Perhaps you could try that. :wink:
PHM tools does a free tool as well.
V
tap start - settings - personal - buttons.
from there u can reset hard keys to what u want. i have the home button stored to this, the first button above the call button.

Start bar on keyboard

hi guys , i know this might seem a strange question but like most my stylus is loose in the holder and i sometimes need to use the keyboard to do most things on the unit and i cant find anywhere that activates the start option on the screen. I have done it by accident once but nothing since. i have checked the manual and it mentions it no where all operations seem to be around the stylus?
does anyone know what key combination it is ?
I have a 02 phone and unlike tmobile which has a one of the 4 buttons on front setup to do this as one of the defaults.
cheers in advance
It should be ctrl+escape on a full keyboard. It might also be enabled by the windows or context menu keys, not sure what your keyboard looks like.
You can use my VJKeypress to get this as well. I think it's keycode 91, not sure, check my website.
V
Im talking about the blue angel, xda 2s keyboard thanks you for reply im not talking normal pc keyboard it does not have ctrl esc or alt on 02 xda 2s keyboard
Sorry! I've never seen a BlueAngel keyboard
V
Why not assign one of the hardware buttons to do this, each one can have a duel function assigned either a tap or hold, according to the phone, in reality this doesn't work (unless anyone knows different - latest O2 ROM - not messed around with), whatever you set for a tap is also carried accross to the hold function, go to settings and locate the power buttons icon select it, then select the button you want (ok for example) then assign the <Start Menu> from the drop down box, press OK, the device might want a soft reset (mine did when I just tried this), when it comes back up hit the assigned button, and use the four way thumb control to navigate through the menus, it saves sliding out the keyboard and it becoming loose - Mike
cheers for this when i tried to reassign buttons before like the camera it wouldnt let me change them ..i hate the camera button getting accidently caught same as the record one as well.
cheers for the advance will do that would just like to know for my own peace of mind as well how to use the keyboard to do it, it should be possible.

Buttons doest work everytime

I have Tytn with wm6 oficial from htc and sometimes the buttons doesnt work. The messages button, IE, Green One, Red One, but the keyboard works everytime. If I turn the phone off and than Turn it on they work for a while. Is there anything I can do to resolve this problem?
Thanks
same problem here...
or when Ichoose to wite a new next message or to read it, the screen flashes back to the home screen and then takes me where I want to go in a couple of seconds.
ttvl4447 said:
same problem here...
or when Ichoose to wite a new next message or to read it, the screen flashes back to the home screen and then takes me where I want to go in a couple of seconds.
Click to expand...
Click to collapse
Hi,
I maybe wrong but so far I think I've nailed this down to task managers installed by either the rom developer or the user that normally aren't in the base rom.
Examples: spb mobile shell, spb plus, possibly even htc task manger.
reason: if you notice spb plus has a Red X option for closing applications when you tap the X, instead of minimizing them to the background. it also brings up a quick menu if you hold the stylus too long on a scroll bar and are scrolling a page slowly using the stylus. if you have this menu drop downwhenyou lift the stylus in that brief period that you do to put it back at the top to scroll further you may end up accidently taping the close application that shows on that menu. it can be triggered by other means on screen and maybe behind the problem.
I've had similar since I run both spb mobile shell and spb plus and have been too lazy to disable the task managers since the schaps rom I run now already has htc's task manager in it by default and is loaded on boot.
try disabling all task managers the show one the top task bar and that recognise screen gestures.
*thank god for full qwerty keyboard on this hermes as i've already done 2 posts today and were this an artimis i' be crazy or not post when I'm out and just relaxing in car in the morning due to artimis doesn't have a mechanical keyboard only onscreen hahaha*

text entry options don't work with Touch HD (on Orange UK)

Hi all,
I apologise if this is not the right place to pose this question, but I just got a Touch HD on an Orange contract a couple of days ago, and I can't seem to be able to change the text entry method on my handset. It always stays as 'Phone Keypad', no matter which method I select, from the several methods listed: Block Recognizer, Compact QWERTY, Full QWERTY, Keyboard, etc. It's the same whether I try to make the selection by pressing the "OPTIONS" button on the phone keypad, or whether I go through Start->Settings->Input
All the software/hardware configuration on my handset is exactly as it was when I received it from Orange, so far I haven't even installed a single new program.
Any help? TIA
Hi.
Can't offer any advice as such, but can tell you that I got my HD from Orange just over a week ago, and I can change the keyboard without any problems.
I originally had a Touch Diamond, so I knew how I wanted it set up. I just brought up the menu from the keyboard at the bottom of the screen when it first popped up and did it from there.
Sorry I can't be any help, other than to tell you that you should be able to do it!
Good luck mate.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed Gyrator and everything started to work.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed HD Tweak and Gyrator and everything started to work. I have no idea how it worked though.
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen.
Since then, mine's stayed as I selected it - on Full QWERTY.
Hope this helps!
langauld said:
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen."
Same happened with mine. If you click on the options then you cant change it, however if you click on the box in the middle of the screen at the bottom, you can change them.. Bizarre!
Click to expand...
Click to collapse
Thanks for the replies and suggestions, guys. I've got it working for me too: by pressing the 4x4 grid-like icon at the bottom centre of the screen to bring up the keyboard, and then pressing the small upward-pointing arrowhead that brings up keyboard options. I guess that's what ultrazonixe probably means... although I couldn't get it work by sliding my finger upwards off the centre button as langauld suggested (except if incidently I did it from the arrowhead icon).
Thanks for the help!
Yes this is quite tricky till you get the idea.
Press the bottom middle button (icon of keypad) to get the keypad up, if its not already up.
Then the bottom icon changes and adds a small up arrow just to the right of the keypad icon. (nothing to do with the four arrows just below the keypad)
you have to press this small up arrow just to the right of the keypad icon and a menu pops labled "touch input settings".
its not the same one that comes up when you press the options tab which does not work.
Press the right choice eg full qwerty or whatever, and hey presto the keypad changes instantly.
same here
Yes I could change it .. via selecting the arrow next to the mini keyboard on the bottom ... but it used to reset it self every time I starsted the phone...
Now I have TouchPal.. I have never looked back.

Categories

Resources