With so many full car kits plus the new style visor mounted kits I was looking for some advice.
From What I see I have 4 Choices
1) Fully hardwired Kit (expensive)
2) visor mounted or cigarette socket plug and go style kits.(are they any good)
3) Headset style (not a big fan of these as keep falling out)
4) Lose my licence (not a good Idea)
any advice would be great guys let me know if you can
You can buy a hardwire kit for about £35 for a second hand Nokia C7K, wiring it is easy, it is only 3 or 4 wires. Less if your car has a car kit plug on the loom, but you will need the adaptor kit for that.
They won't charge the phone though, or provide a cradle.
Don't buy a Nokia C1K though, they don't work with the P3300.
MaskedMarauder said:
You can buy a hardwire kit for about £35 for a second hand Nokia C7K, wiring it is easy, it is only 3 or 4 wires. Less if your car has a car kit plug on the loom, but you will need the adaptor kit for that.
They won't charge the phone though, or provide a cradle.
Don't buy a Nokia C1K though, they don't work with the P3300.
Click to expand...
Click to collapse
cant find such a product as C7K
can you help further
My bad! CK7W
http://www.nokia.co.uk/A4222096
i use a Parrot CK3100LCD it's a verry good carkit and even a child can install it just 2 iso connectors in your radio and that's it. Your sound is then over the car speakers.
Siemens CRK600
I use a Siemens wired car kit - three wires (+ve, igintion and ground) and its done. Speaker with it is excellent, so no need to wire into the car stereo. Has a nice LCD display, althjough I needed jetwaremobile.com's bluetooth extension and phonebook swap to get full functionality.
I agree the parrot ck3100 is brilliant with the xda orbit, i have one in my astra and i have a xda orbit. Going cheap on fleebay
I bought the Aldi BT car radio a while ago and it works perfectly. £70 iirc
Pair the phone once with it and turn BT on when I get in the car, incoming calls come through the loudspeakers and there is a mic in the head unit
Just upgraded
Just got a Sony MEX-BT2500 stereo with built in bluetooth - £90 on ebay, works like a dream... well recommended.
That means that my Siemens wired kit is going spare - I'm going to put it on ebay soon, but if anyone wants to contect me first... just a three wire conenct, and I've got an ISO through connector to connect at the back of the car stereo, so you don't need to cut any car wires, then stick the display on your dash, route the microphone to near your sunvisor and leave the little but very clear speaker inthe footwell or under the glovebox...
I read that the mic isn't that good with the MEX-BT2500. What are your experiences?
We've got Nokia CK7W's in our cars at work, and myself and other orbit users have no problems with them at all.
iirc we paid about £120 per car for the kit and installation, but from what I've seen they are very easy to fit yourselves
glam said:
I read that the mic isn't that good with the MEX-BT2500. What are your experiences?
Click to expand...
Click to collapse
It's as good as any car kit I've ever had - and that included professionally fitted kits and factory fitted car kits.
Because the mic's in the front of the unit rathe rthan up by the top of the windscreen, you get far less issues at speed with wind noise etc too. Highly recommended.
MaskedMarauder said:
Don't buy a Nokia C1K though, they don't work with the P3300.
Click to expand...
Click to collapse
Both my wife's and my carhave a Nokia CK-1W fitted, Orbit works perfectly with both?????
So your quote is slightly wrong, my CK-1W only cost £12 on eBay,
StewD said:
Both my wife's and my carhave a Nokia CK-1W fitted, Orbit works perfectly with both?????
So your quote is slightly wrong, my CK-1W only cost £12 on eBay,
Click to expand...
Click to collapse
Never worked with mine, it would pair but then not work. Perhaps it was the original O2 Bluetooth stack that was the issue. I still have it, I can wire it up and see. Well if I can be bothered I will!
I use a £59 Parrott CK3000 with my HTC Himalaya and my new P3300 in my Audi A3 and its great. Connected it into the back of my radio with just three (Tel+ Tel- & Tel Mute) connections and it mutes the radio and plays through the speakers just like a factory fitted unit.
When I used the same unit in my previous Alfa 156, you could even adjust the call volume using the steering wheel audio controls (but my Audi doesn't have that feature).
For the A3 and other vehicles with "multi-function steering wheels", Parrott even do adapters so that you can use the steering wheel buttins to answer & close a call, rather than having to have a separate non-standard button showing on the dash....
In my Saab 9-3, I use a Parrot MK-6100 car kit which also supports A2DP/AVRCP.
Works well with my Artemis - even the stereo bluetooth audio isn't bad (no skipping/stopping, but the audio quality isn't quite up to my car radio's standard).
It was very easy to fit, and it just worked as soon as I paired up.
I found mine at Amazon for about GBP110 including postage.
Hello,
Is there someone who has any experience or advice about the Seecode Vossor Plus Bluetooth Carkit? I'm thinking to buy this one.
Nice items here, good price :
Car Mount Holder,HandsFree,Charger for HTC P3300/P3350
http://cgi.ebay.fr/Car-Mount-Holder...ryZ35193QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Car Mount Holder, Speaker, HandsFree and Car Charger for HTC P3300 /HTC P3350/ Orange SPV M650 / T-Mobile MDA compact III / O2 Xda orbit /Dopod P800W / Dopod P800 /Dopod M700
Angle can adjustable for easy veiwing - 360 degree rotatable, Suitable for all cars, reliable and easy to use, Flexible pedestal shaft adjusts quickly.
Car Mount Holder x1
Car Cigarette 12V Charger x1
Sensitive Microphone x 1
Parrot is excellent
The Parrot CK3000 is nice if you don't need a screen. It's very stealth - just a small controller with "talk" and "end" buttons and a volume dial in the middle. (I have an Audi A4 and don't have space for a screen) Very easy to install (like the CK3100) because it uses the ISO connectors. Even if you car doesn't use ISO standard, you can always splice the wires or buy adapers if you don't want to splice. The sound quality is excellent, the functions are very basic but very reliable (however, I've only used the kit as a headset - never added additional voice tags and all that). It just works and it works well. You can get them from Amazon.com for less than $100 USD. Even less in eruos.
Got the P3300 and I can't fault it. The quality of the system is excellent, sound and mic work very well and the system is easy to use. Easy to wire in and I have my steering wheel controls connected.
I have seen some with problems, the soldering for the display has been a little thin on some models but nothing I couldn't fix.
I have noticed that sometimes when I answer with the phone button (on the phone) the parrot goes into mute, my advice would be either auto answer or pick up using the parrot. Could just be my setup...
"Parrot is one of the best systems I have come across"
Related
t'ello all....
I have just bought an arkon CM532 with xda2 adaptor. This seems to do the job as a hands free kit, with the usual bugs of noisy GPRS feedback etc, but I can live with that....BUT - I need a GPS ariel that will plug into the cradle and thus the xda2.....I have tomtom software ready to go, but I dont really want a bluetooth GPS, as we all know, bluetooth and xda = hell.
Any ideas?????
Would this work from ebay?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=3730&item=5134905894&rd=1
No idea where you got the idea that BlueTooth GPS and the XDA2 are incompatible - mine worked fine after the first O2 update was applied...
As long as you get the right cable it should be fine.
Bluetooth is more convenient, as you only need the adaptor for charging, and most journeys take less than the GPS battery life.
I use a Pretec Bluetooth GPS I bought from eBay,
works fine.
its not so much the bluetooth that puts me off, more the fact that the arkon has the ability to charge a gps receiver that is connected to it via the RJ11 socket, and I want to know which gps reciever has this RJ11 connector. Otherwise, if I go the bluetooth route, I will have 2 cigarette adapators, and only 1 cigrette lighter socket! Plus, ill forget to charge the receiver too.....
Are you sure you have a Arkon CM532 - mine has no RJ11 sockets anywhere!
What it does have are two power-only USB ports on the base - either side of the regular 5v input socket - and a 5v output on the side which feeds my Socket GPS.
I can also recommend sticky-backed velcro as a fastening medium for attaching the GPS to the side-arm of the Akron.
That said, I really dislike the Arkon - I'd much rather a dedicated until like the one made by CarComm. However, the only UK distributor are idiots.
xda2 cradle for sale
CMPC-15 Mobile PDA Cradle for XDA II / MDA II / Qtek 2020 / i-Mate
Cradle for the XDA II / MDA II / Qtek 2020 / i-Mate with original bottom connector and steady fitting for the XXDA II / MDA II / Qtek 2020 / i-Mate. Specially designed for mobile use.Charging pcb is build-in the cradle. RS-232 and PS/2 connections for connecting the PDA to for example an GPS Receiver. Also with power input connections.
Just got my new Imate PDA2K and it does not fit
£30+p+p
phone holder4
hi guys
i have this and its crap you cant hear on the speaker because of the interference from the phone i use it without the electrics.
regards kevin :evil:
its works fine as a holder and charger. as it was designed not a hands free kit
its works fine tomtom bluetooth gps sony ericsson headset
thanks all....ive gone for the tomtom 3 gps receiver.im assured that it has the relevant RJ11 connector...Ill let you all know how it goes!
On the side issue of the car kit thing, this arkon kit is pretty good I have to say, but I was always aware that it was not really a hands free car phone like those by nokia etc, and will probably jump the bluetooth headset way soon....any ideas which?
Hi all
Has anyone any experience of the O2 Car Kit like this one
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=57252&item=6382293875
I'm well past the stage where I should have installed and be using one, (the car is a Diesel L/R Disovery Tdi, and not exactly quiet), but I'd like any opinions on the best to use, or any problems that might arise.
Althogh I have a BT GPS Unit, I dont use any Route Planning S'Ware, cause few have any usefull maps of Northern Ireland, so its the call audio I'm really interested in.
TIA for any opinions
Based on the pictures this carkit is the same as the QTek2020 / T-Mobile MDAII carkit.
It is said to be of very good quality.
BUT: It is also said that when using ie TomTom Navigator (or the like) your car-audio will be muted permanently.
This carkit was sold in Germany for approx 170 euro (about 110 gbp). So I would say the current auction price is rather high . . . .
I was not aware that O2 sold this carkit. I am using the XDAII carkit that is/was sold by ie. Expansys. The quality of that thing is not as good. Especially the mic sound is horrible for 'the other side'
BTW there are many threads on this (all approx 1 yr old)
Car Kit Query
Hi Ed
>>Based on the pictures this carkit is the same as the QTek2020 / T-Mobile MDAII carkit. It is said to be of very good quality.
Yes I agree, part of what drew me towards this one is the look of it.
>>BUT: It is also said that when using ie TomTom Navigator (or the like) your car-audio will be muted permanently.
I have considered this, and I'm not sure when or if I would use anything other than 'Pocket Streets', (and its maps of this area aren't that good either).
Most of the mapping I have been able to view provide street level detail, only in Larger Built up areas, and main routes connecting these.
Fortunately I already know my way between Belfast and other towns, As a result I dont know if TT or indeed any of the others would be of any real use. As a result, I really am more curious about the Call audio from the Speaker and Mic, during calls.
>>This carkit was sold in Germany for approx 170 euro (about 110 gbp). So I would say the current auction price is rather high . . . .
yes I found it on the T'mobile (D) site still on sale,
fully agree re the price but .... if it works ... then ... maybe ..
>>BTW there are many threads on this (all approx 1 yr old)
Yes and I think I managed to read most of them, I was sorta looking to see if someone else has lived with one of these for while, and have a experienced opinion on the it, any Rom Upgrades needed etc ...
I'm not sure how much more stress I am prepared to endure to get various aspects of this great unit to work as I hoped it would, (can't afford to be pulling on my hair much more these days)
I have yesterday just bought this car kit from the company advertising it on ebay, first of all the compnay are absolutly brilliant to deal with and would recommend them highly.
As for the car kit i have found three little niggles:
1) it isn't as easy as other car phone kits to place the xda2 into the holder, this is probably the case for most xda2 car kits due to the body of the xda2 itself.
2) any sound from the pda will mute the car radio, this so far hasn't been too much of an issue, but you can always just disconnect the car radio mute lead, but side effect of course is that you would have to turn the radio down when you recieve a call, however it is nice that the tomtom directions etc come out the car phone speaker loud and clear.
3) now this one may not be the car kit itself and maybe just that i haven't managed to find optimal settings or have missed a setting up procedure (if there is one). Basically there is a lot of background noise through the microphone, speech can be heard ok but i haven't experienced this amount of noise from any other kit, however i am going to try and relocate the mic to the middle of the car instead of up the windscreen frame near the driver door, this may solve this.
Apart from that it is a very easy kit to install (would recommend a professional install due to problems of bodged installs and car air bags!), it is of a very good physical quality and have seen it advertised for over £150 in the UK.
O2 car kit query
see now thats what I was hoping for.
thanks macca
I'm just about convinced
now just need to know where my wife hid my c'card ???
macca: Just a tip for the mic: Make sure the airstream from then vents does not reach the mic. I read several threads on background noise and most of them appeared to be created by the airstream blowing over the mic.
thanks edsub, i'll investigate that furthur, i maybe moving over to a orange m2000 soon as i have been offered an upgrade, unfortunatly it won't fit in my car kit, so i may have to sell it and get a xda2i instead. xda2 is great, i just miss the wlan.
david young, glad to have helped.
Brodit kits
I wonder if anyone has any experience of these Brodit Car Kits at pdahut? I do like the idea of ProClip Brodit have so you don't have to drill holes anywhere in your car. Any other suggestion?
http://www.pdahut.com/store/home.php?cat=378
I have Brodit and Carcomm cradles installed and they are both excellent. At the moment I have my XDAII in a Carcomm cradle which is powered and has a serial input cable to which you can connect a GPS Mouse or charge a BT GPS.
The Brodit cradles also have the option of an amplified speaker, in the photos you'll see my 2210 on the right of the steering wheel is connected to this type.
In the UK TotalPDA sell Carcomm and Handnav are the appointed Brodit resellers.
See here for images of the cradles in my car.
I too liked the idea of not drilling in my (leasecar) dashboard.
Afaik there are two options then:
Brodit Procip (plastic)
MTU dashmount (metal)
I opted for the MTU and decided to imitate it myself from a metal plate strip. Its quite easy from the MTU specifications:
http://www.mtu.no/english/DashMount/DM_pdf/70224.pdf
I managed the get the cables through the airvent that is now blocked by the carkit.
Now did I get a bargain or did I get a bargain.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=5196552992&rd=1&sspagename=STRK:MEWN:IT&rd=1
So long as you want it for an XDA rather than an XDAII then yes.
I have my 2i in a Brodit kit connected to the cigarette lighter and then a bluetooth Motorola HS810...works a treat. Luckily the 2i fits perfect as I got the cradle originally for the XDA2.
I've also got my TomTom wireless BT receiver on the dash...all work nicely (other than ongoing issues with phone mast transfers causing TT lockups)
Aww hell, I'll just take a picture and show you...my only wish is that on the Mini the holder was locked in a bit higher to show off when people drive past
A
PS - yes that IS a Care Bear...that my girlfriend puts there to "watch over me". I have one of those little dog things that Clintons Cards do (the ones with the big heads and little bodies) in the other cup holder. Thought I'd get that in now to avoid the "errr....is that a care bear?" questions!!
griffog said:
See here for images of the cradles in my car.
Click to expand...
Click to collapse
Errr....just how many PDAs and phones do you want in your car?? Hehe...
They're not all used all of the time but I need them when performin comparison testing
Actually I tend to use TT Mobile 5 on a C500 most of the time now!
Griffog, yes it is for xda however I had an official car kit, the original I think for xda in the past and that would take an xda 2 quite happily although I never tried it out in the car it charged the xda 2 on the bench ok, what are the issues, is there a wiring difference preventing it working?
Just bought this car kit http://www.expansys.com/product.asp?code=109748 for my Qtek 2020i (Alpine)
Pretty comprehensive kit for the money. Comes with control box, speaker, mic, loom for connecting to car stereo system.
I was wondering if there was any way to put the audio of TOMTOM or media player through the car kit ?
I have read about the 10K resistor mod which i tried with another active holder i have but that didn't seem to work
I thought there may be a utility that could fool the PDA into thinking it is in a call and sending the audio through the car kit, but when in a call all other audio is muted.
Are there any other work arounds getting TOM TOM / media player to output through the car kit?
It has been suggested that upgrading the ROM may solve this problem but without knowing 100% I am reluctant to do this.
Inside the car kit the electronics are tiny surface mount stuff.
Is it possible to program a utility to do this???
Come of ye programmers, i'm sure plenty of people will pay for this.
I certainly would like to make a donation, when this site actually proves useful.
I was playing with the car kit again last night and found that one of the wires coming from the car kit chaged to 3.7V when switched on my a call!
I energised said wire and the relay clicked over in the car kit but still no sound from the 2020i, sound still coming out the PDA speaker!
AAARRRRRGGGGGGHHHHHHH! :roll:
Anyone wanna buy a qtek 2020i, i gig stick, active cradle and tomtom europe installed, all you need is a bluetooth or RJ11 reciever and your away.
Unless someone can help with this little problem :?
At last sorted it! Yippee.
The 10K resistor worked a treat on this one, but not the last.
Once got the resister bit working just had to put a 3.7V feed down a certain green wire to switch the relay and have now got music blasting out the car kit.
Yeehaa
Nygie said:
At last sorted it! Yippee.
The 10K resistor worked a treat on this one, but not the last.
Once got the resister bit working just had to put a 3.7V feed down a certain green wire to switch the relay and have now got music blasting out the car kit.
Yeehaa
Click to expand...
Click to collapse
What 10K resistor?? Any links, pictures how you did it would be much appreciated!
I have a Qtek 2020 who is only collecting dust since I got a new Qtek 9100.
Could be nice to at least use it as a MP3 player in my car.
Would the car kit fit on a Volvo S60? I think the car stereo have DIN connectors. I have 6 speakers. If your car have more than 2, do you hear music on all speakers, or only the front speakers?
The resistor thing is here http://wiki.xda-developers.com/index.php?pagename=Connectors
I don't have it wired in the car, it's still on the bench. It would be possible to put it to the car stereo through aux in if there is one.
I have come across a little snag tho, after 7 seconds approx the audio fades out to nothing! I am a little bamboozled.
I think something like this was mentioned in another thread!
A bit of digging to do, but i am loosing my patience with all this messing around with bodges.
Just tried again and it seems to work flawlessly!
We shall see, i'll get it installed and try it on a run!
The motorbike trials cometh!
Just bought a car...
Added a little Brodit powered cradle for the Universal + GPS device.
Now I want to have it talk sexily to me through the car speakers... how might I go about doing this?
I've not really seen a car kit for the Jaguar XJ6, but I suppose this would be a good bet?
Thanks!
Ferg.
Hey, I've got a '97 Jag XJ, I had to make my carkit from separate bits. Don't have the Universal but Imate Jam- principle is the same I guess
Check out my post here:
http://forum.xda-developers.com/viewtopic.php?t=36123&highlight=
Charges my device as well as outputting all sound to car speakers.
Nice one sh,
Mine's a 97 too. Bloody nice beast.
I'll check out your instructions, although am I right in thinking this doesn't have a microphone or anything? I'm new to car kits etc so excuse my ignorance, but does this not hinder the thing a bit?
What does this setup NOT allow you to do?
Thanks again,
Ferg.
Well because I was too tight to buy a full carkit- I made my own (yes I do own the Jag- matter of principle for me!)
Well I've haven't spoken much about the audio side of things in that post... but all I've got is a 3.5mm to RCA cable going into the back of my car stereo.
There is also a 2.5 to 3.5mm adapter to accept the connection on the JAM. Now, you can get these adapters with built-in mics:
http://cgi.ebay.co.uk/2-5mm-to-3-5m...714269100QQcategoryZ14419QQrdZ1QQcmdZViewItem
I don't need it because I have my personal bluetooth kit when in car. So thats the only thing 'missing' if you like- although I've setup it up so I can change this adapter for any type that has 3.5mm on one end.
Send me a link to the holder that you've got- I take it doesn't have an audio out on it?
i made up my own too for the charmer, dont own a jag and havent wired it into the stereo but have stashed a set of "ipod" type speakers under the dash instead.
not wanting to play audio but just wanting to have handsfree use of phone and amplified audio from sat nav.
not running it through the sterao also means the missus and kids are happy with the radio/cd playing and i still get to hear the satnav guidance.
i bought a couple of incar mics and soldered the whole lot up onto a butchered wired headset (the one that came with the charmer)
details http://www.modaco.com/hardwired-incar-handsfree-the-diy-way-t240297.html
although i still havent got round to putting up pics yet
Can anyone recomend a replacement for the standard stero handsfree kit that comes with the MDA Pro.
I've seen these http://www.mobilefun.co.uk/product/10098.htm, but was wondering if anyone knew of any better ones?
I'm also looking for such a headset. The one on your links looks nice, but is there a volume control on it? I can't see that.
The one in mobilefun.co.uk is just the same as the one came from the box.
There is no other alternative so far I could find....
Though I found one (and I ordered already) from
http://pc-mobile.net/pqtaa.htm
that is for a 3.5mm headphone/mic jack.
So, I will post again if this really fits the Universal....GOOD LUCK!!!
Cheers,
Yeah, the headset fits without any problem.
That is the same as the HP Ipaq 54xx/55xx/63xx/65xx, Toshiba e75x/80x.
Although its a bit expensive, USD33 including postage....
Cheers,
Just out of curiousity, what happened to your hands free kit that came with the unit, guys?
The original one comes with the package is excellent except that it is too lengthy and the pair of earphones always messes with others.
I would like to have a single lead earphone that I can change to stereo when I want.
So, the one that I just got is perfect but it is quite easily to be damage....
Cheers,
:twisted: :twisted: My over excited dog snagged them with a paw when I got home from work and I think she snapped the cable inside the sheathing.
Wired headset with headband with wires
Can anyone recommend a headset for the Universal that
IS NOT BLUETOOTH
Has a headband with good sized speakers, not earbuds and dangly wires
IS NOT BLUETOOTH
Microphone, PTT switch, volume
and isn't bluetooth? i.e. it's wired to the 4 pole jack?
Thanks
Nick
Hi Chris,
Thanks for the info!
I have one of this headset that I bought few years ago for my XDA/Wallaby (with the 2.5mm plug). Yes, its very easy to be damaged (very delicate) but yet mine is still functional until now. Some part of the wire is already torn and I have to put some tape on it.
I use it mainly to connect my XDA/Wallaby to my car stereo system.
Thanks that you share this info, now I know that there is a suitable version for the Universal as well.
Do you mind to confirm back that the headset indeed works perfectly with the Universal:
1. The call answer button
2. The microphone
3. Volume control
4. The stereo jack
I will definately get one if you can help clarify that every point is working fine. Thanks in advance.
Yeah. Everything is fine altough the answer key need more practices.
Good to hear that the info is usefual.
Cheers,
Thanks Chris!
The answer button, you just press it once to pick up a call right?
What special practice do you need?
I sticked my old one (for the XDA) in my car dashboard near the stereo system. So when the phone rings, I just press it once and the call then will be in the car speakers. The microphone is not that great, ppl usually complaint me that my voice is so low, but guess what, they indeed can hear me.
lie_ui said:
So when the phone rings, I just press it once and the call then will be in the car speakers. The microphone is not that great, ppl usually complaint me that my voice is so low, but guess what, they indeed can hear me.
Click to expand...
Click to collapse
This is exactly what I'm trying to set up in my car,how do I do it? I tried using a splitter (one 3.5 mm male plug with two female 3.5mm openings) and running one end to my car stereo, and the audio from the call comes through the car speakers nicely but I can't use either the mic from the included (in the box) headset for voice nor will the device's mic work...