Thanks to the entire community for their valuable input and Bepe for his lovely clean rom.
Right, lets begin, heres how to get WM6 on your device with NO "Not enough memory" errors in word, tomtom or anything.
IMPORTANT! You MUST use the files I provide below and you MUST start from a ROM with an Extended Rom. If you have no extended rom then you will get the memory errors.
Start with a rom with an Ext Rom. Here is a link to the T-Mobile UK MDA Compact III rom here you go: http://rapidshare.com/files/17854890/art_tmouk_11311001_024990_wwe_ship.exe
Hard reset your device (Hold the 2 softkeys, press the reset hole and follow the screens)
Plug it into your PC. Wait on the config screen, dont proceed with the alignment, setup activesync as a Guest.
Unlock your CID using USPL found here: http://forum.xda-developers.com/showthread.php?t=311403
Download Bepes rom here: http://www.ramonshare.com/files/index.php?share=4&path=ROMS/HTC Artemis/WM6-By-Bepe/ARTE_WWE_WM6.rar
Download the update util here: ftp://xda:[email protected]/Uploads/Artemis/arte.zip
Extract the util and Bepes rom to any folder
Rename OS.nb to windows.nb
Edit the line which says pdocwrite.exe windows.nb 0 0x3900000 and change it to pdocwrite.exe windows.nb 0 0x3500000
Run UpgradeRom.bat.
HardReset when done.
When it says its going to customize in 3 seconds PRESS THE RESET BUTTON.
Thats it, step by step, but in short for those who know what there doing.
Start with a ROM with and Ext Rom.
Unlock using USPL
Upgrade to Bepes rom using the UpgradeRom.bat file as the EXE seems to wipe the Ext Rom and cause errors.
Hah you got it. That was exactly how I updated my Artemis minus the USPL part which did not exist then, and I have no Out of memory errors.
Although if that's the solution, what actually was the problem? Something to do with EXT ROMS?
"Edit the line which says pdocwrite.exe windows.nb 0 0x3900000 and change it to pdocwrite.exe windows.nb 0 0x3500000"
where do you do this??
thanks for your hard word and determination. your a life saver!!
jamesredfern said:
"Edit the line which says pdocwrite.exe windows.nb 0 0x3900000 and change it to pdocwrite.exe windows.nb 0 0x3500000"
where do you do this??
thanks for your hard word and determination. your a life saver!!
Click to expand...
Click to collapse
Open upgradeROM.bat with windows notepad, you'll see the line there.
Heeey great work dannyoneill!! You've cracked it and all in one day fantastic.
Hmmm...shall I go ahead with this now or wait and hope Tom implements this solution and keeps that dreaded ext rom in his new release :-S ??
Well it looks like the rom updates are the OS only and DONT wipe out the Ext Rom. But when you run it using the packaged, niced and easy to use EXE versions they wipe the ext rom.
Thank you, dannyoneill, thank you. This really seems to work.
That was just perfect, thx. I did that way several times and it works just fine.
Sorry guys for this noob question, I've never upgraded before but now I'm confident enough to give it a try.
From where do I run the UpgradeROM.bat: from the ActiveSync screen or from the bootloader screen?
Thanks in advance.
Connect your device. Perform a hard reset and just before the alignment page plug it into your PC and cancel the partnership question.
@all,
no luck upto now on my cid-unlocked hero, here. gives me "error:
IT write disk-An established connection was aborted by the software in your host machine".
any ideas here?
greetz
Did you edit the BAT file and change the line to read whats in the instructions? If you didnt understnad that step and skipped it thats why.
The update would be sucessful and you just have to hard reset.
Dont forget, if you flash it back to any original rom, even if you previously unlocked it then it will be locked again.
thanx,
didnt think about the possibility it could be locked again! naturally, i needed to reflash an orig rom, as at first i was running a pdamobiz customized rom- update to wm6 didnt work here!
so, i am off to unlocking it again! rest was all considered, i.e. changing upgraderom.bat!
thanx
P.S.: I am up and running now. simply used my "old" imei-check unlocker again!
Is there any way to do this method with the black&blue rom?
the rom in the black&blue finishes with .nbh, and the bepe one finishes with .bn.
Please help...
P.S. I love that rom, I use it with omapclock to 264 and everything just shows up instantly.
GREAT JOB!!!!
I dont think so, the black and blue uses the RomUpgrade.exe method which seems to wipe the Ext Rom as part of the upgrade. The rom then only contains the OS partition not the Ext rom. As its based on Bepes the rom ISNT configured to work without an EXT rom it just doesnt work. Also word is broken and needs aditional registry entrys, Excel also has some issues.
My advice is to stick to Bepes rom, its clean for starters and just add on the bits you want. These can be found in the wizard forums so you get the bits you want. Im testing at the moment as most of the addons seem to slow things down.
I tried this topic's howto, but was unable to perform the first part of flashing the UK tmobile stock rom becouse it would error at 3% saying 244 unknown device id. I got a dutch mda compact iii and had b&bv2 installed with the mem problem. I wanted to have bebe's rom on my device becouse it's clean ... i like clean tought would be nice to have it running flawless .... guess what it does! Bit weird couse i failed the howto and many other things. Here is wat i did, what din't work and what did work. Maby there is some logic in it.
At the beginning:
[1] dutch t-mobile wm5 stock
[2] fixed drivers (running vista)
[3] flashed uspl
[4] flashed b&bv2
[5] used it for a while with errors and word problem
[6] wanted bebe's clean wwe and noticed this thread
[7] flashed uspl
[8] tried uk stock firm like 3 times (few resets between etc), failed all error 244
[9] continued using art tool with the address edit from this howto to flash bebe's, it did but my device wasn't able to boot past tmobile screen/boot
[10] reflashed b&bv2, boots again and with mem errors
[11] flashed b&bv2 with art tool with address edit
[12] install hang a bit, device booted no freaking idea if the flash actually worked, mem errors still there
[13] gave up the idea of having a error less os running
[14] fetched the "exe" install of bebe
[15] flashed uspl
[15] flashed exe version of bebe's
[16] error less wm6, working office, haven't found 1 problem.
So now i have bebe running without errors, tomtom installed my fav spd apps and played around with word, all fine. Very happy and rocking! But i wonder how ? since i suppose to have a screwed extrom....
You proberbly couldnt flash the original rom as you may have to unlock your device. Im planning on making a n00bs update package as I know it can be daunting sometimes.
Anyone know of a generic update with an ext rom that I can include in the package?
Works 100%. Superb! Thanks, matey.... now i just need to find a nice HTC touch black style skin...
check the Universal WM6 forums, they have the skin to download there. Not a big fan myself.
underzone said:
Works 100%. Superb! Thanks, matey.... now i just need to find a nice HTC touch black style skin...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=311225
All the stuff is here. You can just cherry pick what you want.
Cheers
Matt
Related
Guys, my phone is dead and I need a little help please.
I have a T-Mobile MDA Compact II and have mistakenly (why it worked I don't know) 'updated' it with a Prophet firmware release. This progressed as I expected but was I since discovered completely wrong. My phone now shows a black screen with Dopod logo on boot and then hangs.
I have since found this site (looks good btw!) and subsequently the ftp area. I've downloaded the correct firmware for my phone, reset into the three colour screen and kicked off the Romupdater for the proper version I believe to be for my phone. With the 2 releases from ftp (one in that directory appears to be only half a zip file) they appear to be uploading but there is no change with the black screen problem.
I'm now stuck and am hunting for options. I'm more than happy to help myself but can someone explain what I need to do and start me on my way to fixing this.
All because it hangs from time to time when I run up too many apps on it.
Thanks in advance
Andy
Tell us what ROM you are using and which software you are using to perform your ROM update.
Anyway, it is weird that the Prophet ROM doesn't work on your phone. Keep this low tone, but I've done a Prophet ROM flash on my Charmer before. Everthing works well except the camera, that's why I flashed it back to the original ROM. I won't advise others to do so, there seems to be a few 'fatal' cases. I'm not sure, probably because it is compatible with the earlier Prophet version.
UPDATE: Nevermind, you seems to have the information. Good if you can stick to the same threat to avoid confusion. To others, please refer to
http://forum.xda-developers.com/showthread.php?t=275337&highlight=
At work and I've left the phone at home but I believe it was something like 2.3.15 (i.e. upgrade from v1 to v2)
Correction, it's SPL 2.15, IPL 1.12.
I have seen a post on Hermes bootloader access over USB using Mtty and now have access to the cmd> Can someone help me perform a bootloader based ROM downgrade to known working or deleting the image that is there?
Have now found the awizard utility, which file type does awizard need to be fed via the ROM directory?
Yes I'm a newbie at this and shouldn't have messed with the ROM update but I'm an I.T. guys by trade so if you can feed me the info I need I should be able to follow instructions
Phone is still 'dead' though.
It needs
XXX-OS.nba
XXX-Radio.nba
XXX-ExtROM (directory wit Ext Rom stuff)
You ought to get these from the FTP. I've myself uploaded a Charmer original UK ROM T-mobile, it should be still there is no one messed with it.
Hmm, I've missed something then. I put the .nba files into the ROM directory and then run awizard and hit w. Where I would expect to see a list of files with numbers there isn't any.
What I miss?
the dir structure of the aWizard looks like the attached, where you have the ROMs under the "ROM" dir and Ext ROM. Where the aWizard directory has the aWizard.cmd file.
Can someone provide a split up (i.e. seperated nbf files) for the Charmer or the correct memory addresses to punch into nb2nbf to create my own?
The images seem to have been removed from the FTP site and I'm in position to de-brick my phone!
Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.
Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.
The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?
Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274
Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance
same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all
in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure
Helppp!!! please
tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?
I close the wcescomm.exe and the rapimgr.exe is there anything else?
The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see
After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!
I change the language of the rom and it works
thank very much all of you
At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....
hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!
Hello Experts,
i have read a lot of the Threads here, but i can't find a good information
about my O2 Cosmo. My Dash is Simlook free and SuperCID enabeld.
I found this instructions:
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
Click to expand...
Click to collapse
When i edit the .NBH file, i get a "ERROR 270" message!
When i dont edit the .NBH file, i get a "Invalid Ventor - Error Message"
I try to install this ROM:
"RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe"
So my Dash is a German Device, and i want a German ROM, if it is possible!?
OK, i try to go manually in the Bootloader modus, disable ActiveSync for
USB Transfer...and run the RUU Rom...but it allways break down the flash
process at 4% !
...mmh...have i forget any info, that you can help me...i dont know?
Ah Yes...i read in the Thread:
"How to flash a new ROM to your Wizard... a little tutorial!"
Here the link to:http://forum.xda-developers.com/showthread.php?t=298613
But i can see anything on the starting screen, if my dash ist a G3 or G4,
on my start screen ist "ABSOLUTLY - NO - Information" about it!
In the "System Information" i found a RIL Nr. 2.0002 ...
So i think my dash is a IPL/SPL G3...but i dont know it really!
I dont know what i can do anymore, to update my device to WM6.0 or 6.1
Plz, if anyone know what i can do, to fix my problem, plz then tell it to me,
thank you very much, and forgive me about my bad english!
Ok, i test many times this tool "Excalibur USPL- CID BYPASS" ...and yesterday
it works suddenly...i dont know "why" it works, i have done the same, like
every time i try it, but yesterday my dash move to the needed "WHITE
Screen"! And so i able to run the Rom Update, and it works fine!
Ah yes, my Phone tell me i'm in "SuperCID" Mode...so "WHY" i must use
this "CID Bypass Tool" ....crazy??? Or is my Phone a Liar...?
I have now installed this Rom, it Works a bit faster i mean:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.90_Ship.exe
But it is the same Rom Vers, like my old O2-Cosmo Rom, WM5.0 (1) with
Future Pack. But i have now the HTC Splash Screen!
So i want now to install this Rom (with WM6.1) :
"NoThrills_WM61_GER_V3.exe"
This is a "Kaiser" Rom... "Warum eigentlich Kaiser, hat der Beckenbauer damit
was zu tun...*g*
But when i try to run again the "Excalibur USPL- CID BYPASS" tool, my
dash show me only the "Linux Monkey" (Pinguin) Screen and hang up the
Phone, so that i must remove the battery....
The "White Screen" (that is the Screnn you must have to flash your Rom),
will dont come anymore....i dont know how...??? I start this batch file,
"Uspl.bat" ... and follow the instructions....mmh....allways i get the Linux
Monkey Screen...and not the white screen, "WHY" ?
Anybody a hint, how i can move into the "White Screen" Modus?
And a Question, is this Kaiser Rom compatible to my HTC S620 ?
Please belive me, i read a lot here...but i cant figure out this..., this Forum
here is a bit confusing, on many Threads you can read other informations!
Plz anyone, tell me (who know it) how i move exactly in the White Boot Screen?
Thank you!
If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...
drkfngthdragnlrd said:
If I understand you right you flashed a rom from the HTC Kaiser on your Dash. That's Windows Mobile 6.1 Professional for Touch Screen Devices. You need a rom from this thread for your Dash, not the Kaiser thread. Those ROM's are specifically for that phone. I doubt they'd even work on other Touch Screen phones because of it has the radio (I believe Radio is like Drivers in Windows, I may be wrong.) for that phone. As to fix your problem. I have no clue. Maybe you can get lucky and reflash it with an Official Dash ROM for your phone, but better getting advice on that from one of the more experienced people here. I'm a bit of a newby when it comes to this phone stuff. Good luck...
Click to expand...
Click to collapse
Thank you!
But "NO" i don't flash my HTC S620 wit a Kaiser Rom..."What a Luck" ...i try
to do it...and now im Happy that this have not work for me!
I actually install this Rom:
RUU_Excalibur_HTC_GER_1.11.407.2_4.1.13.28_02.63.9 0_Ship.exe
I have now understand, what is a Kaiser ROM, it is the Device Name, oh
Man...i'm so a dummy....haha...
But i have a success, i change my O2 Rom to a HTC Rom
The Question now is, how i move in the "WHITE BOOT SCREEN" ?
That i'm able to Update my Rom to a WM6.1, if posible, a German 6.1 Rom.
Is here a German WM6.1 Rom?
Is a WWE a Multilingual Rom, is in such ROMs German Language included?
And how i can remove the CID forever, so that im able to update a ROM
without a CID Bypass Bootloader?
Any ideas?
The thing is, ...this CID Bypass Bootloader work "ONCE" and now that
Bootloader dont work anymore...i dont know why...i get only the Linux
Pinguin Screen...and this is a "Hang up Screen" so that i must remove
the Battery, for a new start.
But i get nevermore the "White Boot Screen" ...how is this posible?
I do the same, like before i do...mmh...???
If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.
drkfngthdragnlrd said:
If I understand what's been said. You need to re-run the CID-Bypass anytime you reflash you phone. As for a German ROM. I am not sure. Ypu'd need to look around through the furom. You could try the "Seach" feature and see what you come up with.
Click to expand...
Click to collapse
Thank you,
but i try to run the "CID Bypass" but the "CID Bypass" run every time
into the "Linux Pinguin Screen" ...(i think it is programed in Linux?)
But the same "CID Bypass Bootloader" - work - for me "once" !
But now, not ! I dont know why?
With this CID Bypass Bootloader, i flash my Q2 Rom into a HTC Rom !
But that was only possible, as my dash move with this "CID Bypass Bootloader"
INTO a "White Boot Screen"...!
But "HOW" this was possible...i dont know...now this CID Bypass Bootl.,
wont work anymore....
You know what i mean?
The same tool (CID Bypass) wont work anymore, it work one time only.
When i now try to run this CID Bypass, i get a "Linux Pinguin Screen" in
Black. So there is a little Linux Pinguin "Preloader" ...and then the Phone
have a SOD..."Stand of Death" you Guys call that so, i think so!?
To search here, is very strange for me....i get results of all Forums here!
That was the reason why i want to try the Kaiser Rom, while i search
here in the Excalibur Forum...so i had think so, that was wrong, you know!?
Sorry, my english is not good enough to tell exactly my expirience!
But Thank you for Advice!
Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.
drkfngthdragnlrd said:
Hum, does it still look like windows mobile? If so they may have just changed the load screen. Either way when you run the bypass program, there' one step that'll show a screen on the phone when in windows mobile itself and you must press the center soft button to "continue" and then it'll enter the white screen mode. Sometimes I forget this step and bounce through the steps missing that. If you can't get into windows mobile, try reflashing with your phones official ROM first. They don't require the white screen. There's also a way to enter the bootloader screen by holding down a button, I forget which, while you press power to turn the phone on.
Click to expand...
Click to collapse
...no no, this ROM runs great! I have no Problem with this Rom!
But i have found a Solution "Yeah" !
For all who want to flash a O2 Cosmo!
Try this Link: Click
Thanks to the Uploader, found it by searching!
The last in line: "Unlock_phone_files.zip" !
Follow the steps in the text document!
Work fine for me!
But when you want to flash, and you get a connection ERROR, remove
the USB cabel, and put it back on your Dash, and run then only the
"ROMUpdateUtility.exe" again and it will work.
(Your srceen are allways WHITE!!!)
I had flash for 10min the "RUU_Excalibur_SPL-1.11_UpgradeOnly.exe"
You must extract the exe file, and copy the *.nbh file to folder 3!
After you run the "Auto.bat" and the Connection Error, click finish,
remove the USB cabel, put it back on the dash and run again and only
the "ROMUpdateUtility.exe" !
All work fine!
Thank you Developers!
HI,
Im having problem installing a new ROM wm 6.5 to my touch diamond1. I tried doing the installtion from my internal storage. I renamed the new ROM already and place it in my internal storage and tried to install from there. I have a hard SPL Olinex 1.4 or 1.37.
after I pressed the lower vol+back button the red/green/blue screen cam and then a gray screen asking for movihand.mtg and after that it loads another gray screen saying loading.............. for a long time.
If anyone has encountered this problem need assistance.
Im trying to install deepshining ROM ver 8.
Thanks,
You need unsigned hard_spl like the Olinex 1.40 or 1.93
see this post:
http://forum.xda-developers.com/showthread.php?t=416211
do not forget to use the search option
things i found to check:
do you have the hardspl 1.93 (are you sure)
try deleting the files on your internal storage (or copy them to your computer) and only put the DIAMIMG.NBH file in the root
try it with the customruu.exe if it stays at 0% for too long, something is wrong, probably with your hardspl
put your device in bootloader (rgb screen), connect to computer, on the bottom serial should change to usb. try using customruu.exe.
you need to have the nbh file in the same directory as customruu offcourse.
maybe a not so nice remark. sorry in advance:
but if you have so many problems why try flashing at all? i can guarantee you that you will run into problems using custom rom's. you will have to do a lot of searching and trying to find solutions. the manuals about flashing are already in the forums. and working for everybody else. so you are probably doing something wrong.
I would suggest that you search a lot more and longer and list everything you tried. you are not the first to run into problems, and you will not be the lasts.
good luck
thanks I will try again thanks for the advise.
Hello,
I've got an touch diamond with hard spl and windows mobile 6,5... but today my touch screen doesn't react on touching anymore so I need to send it for warranty. I had an backup of my original spl but I lost it installing windows 7...Now I need an original spl for my vodafone phone... Maybe someone can help me with this(I'm from holland don't know if that matters for the version of the spl...)
already many thanks...
Erick
Try searching on the Vodafone website for a Rom for your device, if you are able to find it then flash it, it will install the rom and radio, but the SPL will remain HardSPL. As the final step when you have your stock rom flashed is the SPL flashing, the SPL can be extracted from the Vodafone rom package with "nbh extract"... when you will have it follow the steps in the HardSPL thread where you can find the way to flash the original SPL...
Allright, I installed a new firmware from the internal storage because my touch screen doesn't work... now the only thing i need is the original bootlader. I tried nbh extract but it doesn't work on my windows? (windows 7) here is the link to my original rom http://www.vodafone.nl/Vodafone/wg2...igned_Diamond_52.44.25.24_1.08.25.08_Ship.exe
maybe someone can help me how to install the bootloader...(again I have no touchscreen anymore
regards and thanks already
heres how i envisage doing it.
you need to run jumpspl on your phone. I guess you can still run an OS and execute apps using the navi pad and action key.
if you have done the jumspl correctly your screen will rurn blank connect your phone to your PC and then you can flsh the original spl back!
i attach the jumpspl with instructions as well as the SPL.nb file extracted from the ROM which you posted the link to.
i did not recreate it as an nbh file as i do not know what model ID, country ID,Version and language your phone, is may be some one else can tell you! or if you tell me can build a flashable nbh for you!
i ask can some one else to please verify this procedure first, before you attempt doing it!
Well great thanks for the help but maybe you can make a flash file for me...the next thing is the problem, windows is installed and when you want to start windows you will need to tap te screen to run the standard procedure to allign the screen and set the date...I can't do this without touch and so i can't load any apllications how do i find the info that you need?regards
Can anyone tell me where to find:
ID, country ID,Version of my HTC touch Diamond??(without touch screen)
regards
alrright the next things i've found hope that it helps for creating a nbh file for my spl instead of the hardspl...
Country - The Netherlands
Dutch Language
Rom1.93
DIAM100
FCDID:NM8DMS
ok ive done it with the info you gave but i also used some of the generic info like Moel ID= Diam**** .... etc
the nbh is built but you should get confirmation off some one else before you proceed! i take no responsibility ! hope this helps
can somebody check/confirm this? Already many thanks! regards Erick
allright i installed it but it doesn't work still have got olinex spl...at this moment active sync is working maybe someone can help me out now?
regards
it wont work until you run jump sl properly! jump spl overides the write restrictions on the spl!
if you run jump sply correctly the screen will go blank as soon as you execute it!
then connect you usb cable and flash! (whilstthe screen is blank)
already thanks for the great help, JUMPSPL is running! now i try to install the rom with customruu and then copy the nhb you made for me in the same directory..only it still stays on olinex
CustumRUU says it is installed correctly and that it's finished...I think Jump SPL isnt working like it should, the screen is not turning black but it says that i can install the spl...I think the problem is that i can't alling the screen and windows is not fully loaded yet..?
regards
mmm, the problem is jum spl alright! im sorry i dont have a solution for you may be some one else can help! try searching i quiet sure i have read similar problems elswhere!
yeah the problems are there enough but no sollutions to it...I need the following thing...In the startup folder of windows mobile there is the welcome screen, i wan't to delete it so maybe i can go throug loading windows and then i maybe can load the jump spl...just to skip the allignment of the screen...but when i want to delete the files it says that i've got no autohority, also not with total commander, maybe someone knows anything to delete the files with active sync..?
regards and many thanks already to idristo