Hi, is it possible to connect the BA, via WIFI (P2P connection), to a PC with a WIFI card and use the PC's internet connection tu surf the web?
I tried: I can make the BA get the signal, but when I try to connect to a website it doesn't work.
Thank you in advance.
Bye.
fabbor75
I don't think its possible to do this directly using a P2P WIFI connection, but if you can get activesync to work over a P2P WIFI connection, it might work. I know is I use activesync over a USB connection & I can surf the net all day, so I'm thinking it might be possible to use the same approach over wifi.
Thing is I don't know if its possible to use activsync over P2P wifi
Solution
The problem is that windows not chain the IP Adrress of PC and Pocket bacause Nat not work under Xp basic system.
It's possible however to install a third party software to route packet from Pc to pocket i think all NAT's program can do that!!!!
Find one and Good Luck.
With WM2003SE i've used WINROUTE
Maybe?
Hi fabbor75!
Maybe your problem isn't the connection to the PC, it's maybe the DNS-resolution. Check your TCP/IP-settings on your BA, the important thing ar the DNS-Server.
The badest thing you must do is that you have to configure all TCP/IP setting manually: IP-Address, Subnetmask, Gateway and DNS-Server.
But you have to configure EXTERNAL DNS-Server on your BA, this one you got from your internet-provider, not the PC to which your BA is connected P2P. And the Gateway is the IP-Adress of your WiFi-card which is built-in in your PC.
Maybe this helps you.
Greetings, Peter
When configuring Activesync, you would choose which connection for it to use to sync with exchange server and in the WM5 I would pick My ISP but on the WM6 "Internet" is the only options in the drop down menu.
Shouldn't it be listing all avaiable connections you have added in the Connection settings?
Maybe a bug? or is there a setting where I select connection type for "Internet" on WM6?
Thanks
Bill
In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?
mrvanx said:
In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?
Click to expand...
Click to collapse
Yeah Activesync seem to be working fine but in WM5 it wouldn't work with connections that uses proxy and it would allow me to select a connection in the drop down menu that doesn't have proxy setting ie "My ISP"
Perhaps the new Activesync now works with proxy.
As far I can tell it's working fine.
Mine does not - I have to manually use activesync to get mail from the Exchange Server. Push does not seem to work. There is another thread on this here:http://forum.xda-developers.com/showthread.php?t=297781
It is really annoying me at the moment as I canot find a workaround.
It seems that activesync can find the GPRS when I do a manual Sync, but has a warning that i do not have a cellular internet connection. Odd. I originally used the Orange .cab files to set up the connections, I then deleted them and recreated the connection manually which made no difference.
Any ideas would be welcome!
I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet
well i also have WM 6 installed on my device and when i configured AS to sync with mail2web exchange server it stopped accessing the Internet when connected to the PC via USB/ AS.... whenever i try to access the Internet when the device is cradled the device opens the GPRS connection and connects to the net.... how do i get AS to connect to the net when cradled and not GPRS... and the exchange sync gives an error MSG 85020006...
someone please help me.... its really very frustrating not being able to connect to the net when connected via USB/ AS...
thank u
nahguam said:
I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet
Click to expand...
Click to collapse
This solved my problem....thank you so much!
Dear All
I cannot find the original CD, therefore I cannot install the modem drivers onto my WinXP laptop. The modem drivers are necessary to use my PDA (Orange SPV 3100 - Hermes 100) to connect to Internet via UMTS - HSDPA
Can somebody help me by emailing these drivers ([email protected]) or posting here or attaching somewhere on Internet?
Thanks a lot
Saulo
I was told that modem drivers are the same for different brands, I mean Orange SPV M3100, or HTC TyTN / XDA trion / MDA Vario II / VPA Compact III / Dopod CHT 9000 / Dopod 838 Pro
Thanks and please help
Saulo866
You shouldn't need modem drivers if using a WM6 rom. Am I understanding the problem? The Internet sharing app uses a virtual network driver that works much better than the old modem drivers. And if you aren't using WM6, upgrade to it. The Internet sharing piece alone is worth the trouble.
I belief installing Activesync 4.5 should be sufficient.
Dear All
On PDA side I have an Orange SPV M3100 (Hermes 100) with WM 2006 Professional: CE OS 5.2.1413 build 17741.0.2.1
I am not sure whether this is a cooked rom or shipped one. I am inclined to believe it is a cooker WM06 rom
On laptop side I have
- ActiveSync 4.5.0 build 5096: it works greatly
- winXP SP2
Now my question is: WinXP does not see my Hermes as a 3G UMTS or HSDPA modem. Therefore I am unable to use my Hermes to connect to Internet.
My APN is set correctly, on the Hermes side: I called my UMTS-HSDPA operator and set my device accordingly. But the 3G operator also told me to contact HTC or Orange to download the modem driver to make it accessible by my laptop. ActiveSync 4.5 alone does not suffice, since it is only for sync purposes. In other word currently:
- If my laptop is already connected to Internet (e.g. via LAN or WiFi) then my Hermes can ALSO connect to Internet, via ActiveSync 4.5
- Viceversa, if my Hermes establishes a 3G connection, or GPRS connection, my laptop CANNOT use it to access internet.
If you know how to solve this problem I would greatly appreciated.
Thanks
Saulo
i have winxp pro with AS 4.5 ... and all i have to do is turn on internet sharing on my phone, plug in the cable and im done.. the computer will automatically recognize the phone as a network connection.. and i have tried this on a computer without AS and the computer wouldnt recognize the phone, so it appears that activesync is necessary for sharing (it doesnt sync with internet sharing on, but i believe AS has the drivers that are needed)
By the way I have 2 Italian GSM-UMTS-HSDPA operators: Vodafone and Tim
I have tried. I have set correctly their APN settings: (for tim is ibox.tim.it)
While on Hermes side everything seems fine, (for example Pocket Internet Explorer can open web pages) my laptop cannot use Hermes to access internet, even if ActiveSync connections is established and working (hermes synchronized)
Please help
On Phone goto:
Start ~> Programs ~> Internet Sharing
you should have no problems.
saulo866 said:
By the way I have 2 Italian GSM-UMTS-HSDPA operators: Vodafone and Tim
I have tried. I have set correctly their APN settings: (for tim is ibox.tim.it)
While on Hermes side everything seems fine, (for example Pocket Internet Explorer can open web pages) my laptop cannot use Hermes to access internet, even if ActiveSync connections is established and working (hermes synchronized)
Please help
Click to expand...
Click to collapse
on laptop clik activesync icon in the bar and from "setting connections" disable "allow uSB connection"
then do on ppc what Custel abowe wrote
Thanks to all of you!
Following your suggestions now I can connect using my USB link, between Hermes 100 and my laptop, running WinXP.
I did it by first upgrading to Schap WM06 3.3c
Then making the few steps outlined above
My next question is: was anyone succesfull in using Bluetooth, instead of USB link?
I mean, is it possible to access Internet, via Hermes 100 3G-UMTS-HSDPA connection, by connecting laptop and Hermes via Bluetooth?
Thanks again
Saulo866
By the way I noticed that if you use activesync USB link (you do not need to disable USB connection!) that what happens is:
- if you browse internet in your laptop by using Hermes 100 as a UMTS/HSDPA modem the syncing between laptop and Hermes goes down, stops: the device works as a modem but any synchronization stops working. In other words you cannot perform any synchronization (via activesync) or any other operation, like file transfer, while using activesync as a usb-type-link between laptop and Hermes.
Am I right?
Why is that? I mean why cannot I sync my device (or transfer files) and at the same time use my hermes as a 3g-modem for my laptop?
Thanks
Saulo
any clue why this happens? I mean why you cannot sync and browse internet at the same time?
After connecting to the internet via internet sharing, I re-enabled "Allow USB connections" in AS4.5 nut it still wouldn't sync. I guess at the moment we have to be contented with internet sharing w/o being able to sync Hermes and our computer.
A bit OT but has anyone successfully connected to the internet via internet sharing in Vista?
Yes
Yes I have been using Internet Sharing with windows vista successfully. Once it connects there are no problems BUT it doesn always readily connect and often requires a software reset .
I have WM6 Schap's 3.57 on my hermes 300. The internet sharing works great but when I've disconnected my GSM connection while I'm connected to a Wi-Fi network and I try to use "Internet Sharing" I get the message on my phone: "Cannot connect. Ensure that your phone is correctly configured, service is available, and that flight mode is turned off before trying again."
Probably WM thinks I'm in flight mode altough Wi-Fi is connected.
Is there a way around this?
How can you tell if the phone is using the WiFi connection instead of HSPDA/GPRS/EDGE? (Roaming is a bit expensive)
The USB-modem driver worked with WM5. When I start the "Modem Link" program, windows says it found new hardware. I've installed the driver I used with WM5. I tried using it by calling *99# but it didln't work. Should I call a different number with WM6?
Anyone the same problems and/or solutions?
It does work great indeed.. Internet connection sharing..
Except.. when you want to connect to a VPN.
I never had issues with using WM5/Black as modem. But now.. in the HTC Wm6 (official one) only Internet Sharing is left.
Does anyone have a solution for the VPN connection?
Thanks all!
Arnie
saulo866 said:
Thanks to all of you!
Following your suggestions now I can connect using my USB link, between Hermes 100 and my laptop, running WinXP.
I did it by first upgrading to Schap WM06 3.3c
Then making the few steps outlined above
My next question is: was anyone succesfull in using Bluetooth, instead of USB link?
I mean, is it possible to access Internet, via Hermes 100 3G-UMTS-HSDPA connection, by connecting laptop and Hermes via Bluetooth?
Thanks again
Saulo866
Click to expand...
Click to collapse
I have successfully connected to the interrnet via the blutetooth connection.
In your Hermes, select "Bluetooth PAN' instead of USB under the "Internet Sharing" "PC Connection".
In your PC, click on the "Join a Persoonal Area Network" under the bluetooth option and slect your device and you are done.
PS: Your device must be paired first.
I've had the same issue when connecting to my companies VPN, I had to connect to the Tytn via Internet Sharing via Bluetooth to use the VPN.
arnoutboer said:
It does work great indeed.. Internet connection sharing..
Except.. when you want to connect to a VPN.
I never had issues with using WM5/Black as modem. But now.. in the HTC Wm6 (official one) only Internet Sharing is left.
Does anyone have a solution for the VPN connection?
Thanks all!
Arnie
Click to expand...
Click to collapse
hi guys
i need some help for internet sharing...just because i dont understand how to let it works...
wheni connect and syncronize my pda i try to lunch internet sharing...but it ask me options for usb or bluetooth
with bluetooth i cant use internet (in menu-->BT settings i have my pc but no service in the list)
with USB i have to create a connection (Connection settings-->??) because i have to create a connection...but no usb connection is mentioned in list
maybe i misunderstood internet sharing mean...i can use my PC connection to surf on pda right?
Using your PCs internet connection on your P3300 should be automatic when connected through Activesync or Windows Mobile Device Centre.
The program on your P3300 called 'Internet Connection Sharing' is so you can use the P3300 as a wireless modem and share it's Internet connection with your computer.
I recognise this problem however I have some what other.
If I connect to my PC the PDA is connecting directly by GPRS.
My details are in internet sharing are:
Status: disconnected
PC Connection: USB
Netwerk Connection: T-Mobile Internet
How do I manage that the PDA makes a connection with Internet with only USB and not creates a network connection for which it's trying to connect to by GPRS.
I tried to search for this but could not find the answer. Most folks want to have their PPC go through the internet on their PC when they are connected to activesync. I would like to prevent the PPC from using the activesync connection and use 100% cellular connection.
1) I tried to block the wescomm file in my firewall and that is no good because all new TCP outbound PDA connections will want to use the activesync link. Only applications started before activesync links will go through the cellular.
2) i found a registry entry where i can tell the USB connection to not be used as the default gateway. This works fine the first time you connect. It forced the USB connection to use the default gateway of the cellular link and bingo it works. But the next time you connect to activesync the reg entry gets overwritten.
Any ideas on how this can be done?
Thanks,
JD
tried choosing My Isp in network for programs which automaticly connect to internet
in connections>connections>advanced>select network ?
How does choosing "My ISP" differ from choosing "My Work Network" or "Sprint"? It seems like choosing Sprint would be the best bet since it should always use sprint. I'm hesitant to put it to "My ISP" since that profile is listed as "Phone as modem" which would charge me.
JD