IE not working but connection is OK - 8525, TyTN, MDA Vario II, JasJam ROM Development

I've tried 2 different ROMs and seem to be getting the same problem. I don't know if it's my settings or another problem, but basically IE stops working. It says connecting when I try to go to a site and then the bar goes across like it's finished and it does nothing - loads up a blank page. I know the connection is still working because push email works, and I can load up websites in Opera. I've tried searching but maybe I'm missing it with the wrong keywords, etc.
Anyone experienced anything like this and is there a solution? It seems to work for a while shortly after flashing the ROM or a HR, but then it goes out and a soft reset does nothing either
Thanks in advance hopefully!

Did you installed a provider (ex: cingular) version? If so, guess that there are some preset proxy settings. Make a search and you should be able to found a .cab to manage and remove proxy settings.

Related

Data Connection keeps disconnecting

Hi, maybe someone can help, i have already tried two different ROMS from this site and my Data connection keeps disconnecting right away after it retrieves something.
For example, once i connect to retreieve email it disconnects, then if i try opening my browser go to google.com and leave it inactive just for a few seconds it disconnects. basically every application i open or close keeps disconnecting me. once connected i am fine, but has anyone else run into this?
I have tried all the different CAB settings for MEdianet
I have a Cingular 8525
I tried Vanilla as well as LVSW Roms, i just would like my data connection to remain on. I am not looking for a tweak which constantly forces it on (unless thats a last resort), i just would like it to behave as it did on WM5
Any help would be really appreciated
Thank you
cityguru said:
Hi, maybe someone can help, i have already tried two different ROMS from this site and my Data connection keeps disconnecting right away after it retrieves something.
For example, once i connect to retreieve email it disconnects, then if i try opening my browser go to google.com and leave it inactive just for a few seconds it disconnects. basically every application i open or close keeps disconnecting me. once connected i am fine, but has anyone else run into this?
I have tried all the different CAB settings for MEdianet
I have a Cingular 8525
I tried Vanilla as well as LVSW Roms, i just would like my data connection to remain on. I am not looking for a tweak which constantly forces it on (unless thats a last resort), i just would like it to behave as it did on WM5
Any help would be really appreciated
Thank you
Click to expand...
Click to collapse
the tweak you search for is in the Phone Section of HTweakC... enable always on of a certain connection... and yes it is a last resort... as the OS closes inactivity connections... now the timeout can be changed of course but that requires registry changes under HKLM\Comm\ConnMgr
Connection stays on!
Hi!
Maybe you can help me.
I upgraded my WM5 to WM6.
Now my problem is, if the mobil connect to gprs (automatically,for mail download,...), it doesn`t disconnecting after receiving and stays on line! I tried the settings for the mail account. But nothing helps. The best would, if the data connection disable after same minutes. Save the Bat.
You have a solution for me?
Thx
Chris

tmotzones cab initially works! but then?

Hey all, I have a cab file called "tmotzones" that loads all the correct settings for the t-zones proxy. After a fresh ROM upgrade, this cab works fine...internet hits fine. But then after awhile, even though the settings appear to be there, my internet stops working. Anybody familiar with this?
yea, happens to me. you have to go into your connection settings, then go to your gprs settings, and change whatever your data connection, change what it connects to(if it says The Internet, change it to anything else) then save it, then go back in, change it BACK and save it again. it SHOULD do the trick.
AznGunner said:
Hey all, I have a cab file called "tmotzones" that loads all the correct settings for the t-zones proxy. After a fresh ROM upgrade, this cab works fine...internet hits fine. But then after awhile, even though the settings appear to be there, my internet stops working. Anybody familiar with this?
Click to expand...
Click to collapse
please [email protected]

IM LOST 4 hours of tinkering and still...

First off I have the Sprint Vogue. Ok this morning I decided to update my phones Rom and this that and the other. I found NFSFAN's custom wm6.5 and I am loving it but now I have some issues.
Everything is loaded and partially working. I really like it but somehow and somewhere there are problem. I don't have internet access any longer, it dials out to #777 and then goes away like its connected, but when I went to update my email, weather, and then to try Skyfire.... I get no connection no internet, or something in that nature. So I looked in a few folders to look at some setting and nothing is out of order.
Here is one of my messages that I get when trying update my weather:
Couldn't establish internet interpreter.Connection
Line 1
(Temp\rartmp99.802\titaniumWeather.mscr): connect ("The Internet")
I think I may have the fix for Titanium Weather but I still need more help.
Then I get a window for:
Network Log On
Resourse: Data Connection
User Name:
Password:
Domain:
I looked at this setting in my network connection folder and press the finish button when I was done looking at the information since I couldn't find an exit button.
Another issue is my MSID is set to all zeros to the best of my knowledge is should be the same as my current phone number. I have tried ## this # that and I always dial out and an operator comes on saying the number or code entered is invalid.
Am I over thinking this or how do I fix this. I am getting frustrated with the searching and digging and not getting anywhere, can someone please help me with this?
also does it matter that my phone use to say it was the VOGU 100 and now it says its the VOGU 200
Are you with Sprint?
There is a ton of info in NFSFAN's thread regarding getting Sprint back on the internet, just search.
Thanks for that, I did use the search on this upgrading forum and couldnt find what I needed..... Thanks juddy, after a few minutes I found my answer and it all works now. All that was needed to be done was to revert to his/there 6.3, make sure that it all works and then revert back to 6.5. I am getting on the internet, weather is updating, emails are syncing onto my phone. So far so good only time will tell on how well it works. Thanks

GPRS problem unsolved

Hi,
Im using unlocked T-mobile MDA pro 64mb phone with WM 6.1 (build 19960.1.1.8 TML)
The problem is that when I connect to GPRS, Internet explorer, outlook and most of the internet softwares (opera browser, google maps etc...) don't work. Internet explorer stops at loading. outlook says synchronization error. But, a few softwares like IM messenger, some trading software work fine. The problem occurs only when on GPRS. Everything works fine on wifi.
I have been facing this problem since I have unlocked the phone and flashed it for the first time. I have flashed for several times with various roms. initially it works but soon problem reappears. hmm.. Problem did not appear in WM 6.5 (but phone is hell slow. So, im forced to remove it). Further the problem is not network specific as I tried on various networks.
Guys please help me.. I searched a lot on internet and it seems like no one is facing this type of problem in the whole world except me
(Except this: social.microsoft.com/forums/en-US/windowsmobilephonesandaccessories/thread/64977e4f-c8ba-482a-9845-c1d80f88fd71/)
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Simon_WM said:
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Click to expand...
Click to collapse
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
naveensakhamuri said:
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
Click to expand...
Click to collapse
http://www.filebox.com/alhaque/3o6u8gdlfy6j
Also if you want to chnage the radio:
http://forum.xda-developers.com/showthread.php?t=600933&highlight=Challenge
thanks
Hi!
thnx for ur reply... I'm desperately waiting for it...
Any how I tried this... as usually it worked fine at the beginning and problem repeated again. The new development is that the application which I said to be working previously (IM messenger etc...) are also now working now...
Very much frustrated about this issue as I'm unable to find the background reason for it . Even the XDA forums cant help it....And the worst part is that warranty is not going to apply as I unlocked it..
Yet no solution...
info?
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
kalya said:
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
Click to expand...
Click to collapse
Hi
Thanks for your suggestions.
Im using airtel network. and all those settings are already set on my phone.
Yes. I accept that my problem is weird. Thats the reason why I'm unable to find a solution for it.
Yet... I'm testing by changing various roms and still no success.
every time the problem repeats on 2-3 usages of gprs.
When I use opera browser it says that "I have some problem in settings". What to do I've checked those settings for hundreds of times and further if there is a problem in connection settings then why the heck it worked for the first few times?
Some stupid suggestions
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
kalya said:
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
Click to expand...
Click to collapse
Hi
I did every experiment I can think of.... Including testing this sim on other phone or testing the other sim on this phone.
I even tried flashing the original T-mobile rom.
I also tried to find if the programs I install has something to do with the problem...but found none of it affects.
As you said it may not be a rom problem.
If it fails to work completely then I can guss some thing about the origin of the problem like rom or hardware or whatever...
As it is working well initially, I don't understand where exactly the problem lies...
have you done a doc-format? sometimes that can get rid of very peculiar problems.
-Jonny- said:
have you done a doc-format? sometimes that can get rid of very peculiar problems.
Click to expand...
Click to collapse
Hi
Is the process of using mtty and task 28 55aa command what you call doc-format (sorry for ignorance)?
Then I've already did it...
anyway thanks for your suggestion...
I think the real culprit is activesync. anyway I have to do some tests and confirm.
To clear my doubt I decided to conduct a small test. I factory reset my system for three times to check the gprs connectivity...
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc + pairing up + synchronizing problem reappeared.
second reset:
1. GPRS worked flawlessly.
2. On connecting to pc by pairing up problem reappeared.
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc without pairing up problem reappeared.
So, this strengthened my assumption that the problem is with active sync.
I cannot confirm so easily...
Further I would use my phone with out connecting to PC for 3-4 days and check if problem reappears.
Then I would check it by connecting to a different PC. Then I can confirm whether the problem is with active sync of my system or the phone...
By the way, today is the second day of my testing without connecting to pc and no issues detected till now
folks,
Today on the fourth day of my test, I conclude that connecting to my pc creates the gprs problem. No Idea how and why...
suggestions any one?
anyhow I would connect my phone to a different pc and check out if the problem is with my pc or with the phone...
no suggestions?
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
wovens said:
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
Click to expand...
Click to collapse
Hmm..Im sure that I deleted all the older files.. anyway let me I'll try this registry procedure... thanks for your suggestion

Cannot connect with any browser, even though I have acces to th internet

(At&t's HTC Tilt 2 Unlocked, original ROM, win 6.5
)Guys, this is driving me nuts.
When I connect to the internet, via EDGE, both my browsers can't download data at all.
It's really weird.
I can send email on all of my accounts, use my facebook app, etc. It's just the browsers (IE and Opera) that are dead.
I have soft and hard reseted my device, and nothing changes.
When I'm WiFi, everything works Ok.
Any known issues about this?
Thanks,
Dan from Costa Rica
(as soon as I solve this, I'm planning on starting some serious mod of the phone... coming from an old HTC P4350, it's a huge step fwd).
perhaps, you have disabled the "proxy" - try enabling it.
My connection doesn't require a proxy... it's really weird, it was working OK a couple of days ago.
Shot it the dark, but look at Start -> Settings -> Connections -> Connections
Look at the Advanced tab and click on "Select Networks"
Make sure both drop-downs are set to use the correct connection. Not sure what it'll be called on yours, but on mine (T-Mobile) they are both set to "T-Mobile Data"
Also make sure your Wifi isn't on, but not connected to a network, when trying to browse. I find that if my wifi is on, but not connected, all browsers still try to use the wifi and fail.
Good luck,
notaliberal,
Thanks for the tip.
For some reason I had one of them set differently, BUT it's still dead.
Again, I'm pretty sure it's no the phone, since my emails work efforrlessly.
I'm pretty sure something happened with the config.
Damn, it's driving me crazy.
guys, Ok, this is driving me nuts.
I have discovered a couple of details that I think are important.
I have managed to make the BROWSERS work... but it's no a definite solution.
When I turn on the DATA CONNECTION, I was able to check emails, and use Facebook App with no problems at all.... but no browsers worked.
I found out that if i turn on my WiFi, but DO NOT connect to any network, now the browsers work perfectly. This gives me like 10-30 minutes of my browsers to work, but after that time I loose acces to data again.
I have to turn on the Wifi, and turn it off, to gain access again.
It's so confusing and weird, because I haven't read anything like this in the whole forum.
It seem that it's not a hardware thing, but a firmware or software issue... or am I missing something here?
Maybe this will help:
At&T Tilt 2 Original ROM
When turned on:
B 80
R 4.48.25.20
G 61.39tc.25.30h
D 1.59.67150
I had a similar problem and it turned out the carrier had put a bar on my internet usage, from long ago without my consent... Funny thing was, I could access the weather, update time and emails with no problem from my old Hermes but once I got the rhodium I couldn't.
Might be your carrier doing funny things....
Ultramag, and by any chance do you know what should I do to solve this? or what did you do?
The problem is that I don't know anyone with another Tilt2 to check if it's the phone or what.
Tonight I'll be checking with my old HTC P4350 to see if I have any trouble conneting.
Thanks.
Neu
Are you using a Tilt2 with stock AT&T Rom on a non-AT&T network? If so, maybe the best solution would be to install a custom rom. The old AT&T network connections might be getting in the way of your carrier settings. If you don't want to flash a custom ROM, go to settings, Connections, Advanced (tab), Select Network, and check that the programs are being directed to your carrier's connection. Also check on your browsers that they are set to connect to Internet, and not Work Network or anything else.
Jose, yes, I'm using AT&T ROM on a non AT&T network.
I did as you said, on the Advance tab set BOTH to connect to my carriers settings, and I still have the same problem.
I trid to do the second thing yu asked me to do, but I don't know where to find those settings on my browsers (IE and Opera).
If I have to install a costum ROM, I'd like to try first a ROM that's really basic... maybe an official HTC 6.5, to start. Any one like this that you could recommend?
Had to contact the carrier. Got stuffed around a lot. Luckily for me I knew someone who worked in a store, they got in contact with the faults department and 3 weeks later it got fixed.... Was a major pain in the arse though...
I just saw on the HTC page, that there is a ROM that is newer than the version I'm using.
Mine is from 09/25/2009 according to the Device Info, and HTC has a version from 02/05/2010
It's REALLY driving me nuts, so I hope this thing solves the issue.
Neuralgia said:
Jose, yes, I'm using AT&T ROM on a non AT&T network.
I did as you said, on the Advance tab set BOTH to connect to my carriers settings, and I still have the same problem.
I trid to do the second thing yu asked me to do, but I don't know where to find those settings on my browsers (IE and Opera).
If I have to install a costum ROM, I'd like to try first a ROM that's really basic... maybe an official HTC 6.5, to start. Any one like this that you could recommend?
Click to expand...
Click to collapse
A guy from India posted about a month or so with a similar problem, he had an unlocked T-mobile programed it with his carrier settings yet the browsers were not working, had to install a custom rom to solve it. I think some registry keys have the browsers going through different network settings. Have you tried using Skyfire, or Opera 10? Maybe a browser that didn't come with the phone will work.
Regarding custom roms, I've only used Energy's since I flashed my Tilt2, and they've worked great for me. If you want a clean rom, I've heard Da_G has one, and he's pretty well respected here. Just in case you're not aware, before installing a custom rom you have to install HardSPL and do some reading. Check the sticky threads in the roms sections. And Tilt2 phones need a CAB before they can be HardSPLed, check this page http://tilt2.blownfuze.org/.
Guys, I just updated my ROM wit the AT&T one, and the problem is still there.
I guess I'll have to install a costum ROM.
I'll follow the instructions from here:
http://forum.xda-developers.com/showthread.php?t=550540
But they never mention any CAB before the HardSPL? :?
-*-*-*-*-
Last dumb question:
Since I'll be testing new ROMS, once I HardSPL the phone and try a new ROM, i f I don't like it, I just have to flash a new ROM on top of the old one right? no more HardSPL? (aka HardSPL must only be done once?)
My main concern is that at first, I want a ROM as close to the original, but without all the AT&T crap.
Obviously, now I want something that solves this stupid problem with my browser, and now that someone in India had the same issue, I now it's not a matter of hardware.
Thanks.
Neu from Costa Rica
PS: Myphonw came both with Opera and IE. Actually Opera gives me much more trouble that IE with this issue. Unfortunately, now Skyfire only works on certain countries, and Costa Rica is definitely NOT one of them
It's not hardware or a ROM issue. Most likely that it'll be fine with a custom ROM, but I only use official At&t ROMs.
I had the same issue, as I don't use At&t as my network, and I fixed it. My IE and Opera, and other built-in phone services work fine.
Neuralgia said:
Guys, I just updated my ROM wit the AT&T one, and the problem is still there.
I guess I'll have to install a costum ROM.
I'll follow the instructions from here:
http://forum.xda-developers.com/showthread.php?t=550540
But they never mention any CAB before the HardSPL? :?
-*-*-*-*-
Last dumb question:
Since I'll be testing new ROMS, once I HardSPL the phone and try a new ROM, i f I don't like it, I just have to flash a new ROM on top of the old one right? no more HardSPL? (aka HardSPL must only be done once?)
My main concern is that at first, I want a ROM as close to the original, but without all the AT&T crap.
Obviously, now I want something that solves this stupid problem with my browser, and now that someone in India had the same issue, I now it's not a matter of hardware.
Thanks.
Neu from Costa Rica
PS: Myphonw came both with Opera and IE. Actually Opera gives me much more trouble that IE with this issue. Unfortunately, now Skyfire only works on certain countries, and Costa Rica is definitely NOT one of them
Click to expand...
Click to collapse
The CAB before HardSPL is mentioned here: http://tilt2.blownfuze.org/
Some people have posted on Energy's thread saying they can't use HardSPL with a Tilt2, and they were told that a Cab is needed, I assume the one posted on that website. HardSPL is only needed once, after using it you can flash and reflash TP2 roms and radios as long as they are for GSM phones.
Using Task29 is recommended before flashing roms, some people claim that flashing a new rom might not clean everything from the previous one, which causes glitches. For safety purposes I've start doing that, but I've never had any trouble when Task29 was not available.
Regarding a rom close to AT&T stock, I can't help you with that, you'll have to look at the different ones available. Since AT&T just came with a new version it's likely that many chefs will use it as base, but how far they modify it will depend on each one.
Grahammm said:
It's not hardware or a ROM issue. Most likely that it'll be fine with a custom ROM, but I only use official At&t ROMs.
I had the same issue, as I don't use At&t as my network, and I fixed it. My IE and Opera, and other built-in phone services work fine.
Click to expand...
Click to collapse
Graham, the question is HOW to fox it without a custom ROM.
I finally figured it out.
It seems that it's a PROXY issue.
Looking more into xda forums, I found out that there is a small program under START>Tools> Proxy Manager where you can Disable Proxy Settings.
Unfortunately, that ONLY fixes Internet Explorer.
Reading some more, you can fix Opera by entering on the address bar "opera:config" (without the ") in the proxy settings, remove the HTTP proxy and HTTPS proxy (leave blank).
The only problem is that this settings are removed in Opera with a soft reset.
the only way to change Opera settings permanently is to edit \Windows\Opera\opera.ini and set the Use HTTP and Use HTTPS proxy settings to 0, then soft reset.
Thanks to user Moltenfire (original post http://forum.xda-developers.com/showpost.php?p=5120862&postcount=3)
Thanks for all the help guys... Thanks to you, now, after all this, I'm decided to give the Simplicity ROM a try
-*-*-*-*-*-
Edit: It seem that after Opera 9, which is the one that came with my Tilt2, the settigs changed through opera:config STAY even though you reset your device.
I realized this because I didn't install Total Commander yet, did quite a lot of reseting, and Opera is working perfectly... so is IE!
PS: Just in case, in Opera9 the settings are called "HTTP server=" and "HTTPS server=" and must be left BLANK... in case you need to edit the opera.ini

Categories

Resources