Everytime after I run the Windows Live Messenger, my machine never stop auto-connect. I stop it manually, then it try to re-connect...... until I soft reset =.="
Did you try stopping it with WML closed?
1) sign out the WLM
2) close the WLM
3) comm. manager -> stop data connection
.
.
.
.
then it starts to re-connect =.="
This is one of the first things I figured out.
Go into settings, then connections, and create a 'fake' connection which will have empty parameters.
When you don't want to use your GPRS/3G/HSDPA connection at all, set your internet connection to point to the 'fake' connection. Anything that tries to use a 3G connection, such as messenger, will try to connect and fail only once, and never bother you after that. When you need your regular connection, just go into settings -> connections, and switch your profile to your operators connection.
No Data
You might want to try this little app.
http://www.modaco.com/New-FREE-Utility-t246171.html
As the author states, it's very handy for when you're abroad, but I tend to use it when watching video to stop the connection bubble interfereing with my viewing.
happens to me when using wifi n start wlm. wants to use 3g/hsdpa as default.
i just turn phone off until i start the app, then enjoyh quiet of no phone for a while if u miss ur phone turn it back on afterwards. it will use the wifi after that once connected.
I have the exact smae problem.. do later versions of messenger live resolve it? I haven't tried yet.
Related
I'm quite sure I have my xda iis configure incorrectly.
When I go into connections. There is only one entry. That is "my work network". I have my isp set up in there so I can access the internet via gprs.
This works perfectly. I have outlook checking my email every 5 mins.
Here's the problem.
When I connect it to my computer, it still checks for email, but it doesn't use gprs, it looks like it uses the network my computer is on. (which is great!)
Now, the problem I'm having is when I disconnect it from the cradle gprs does not start back. it says its using the grps connection, but never connects. (I can tell that it's not doing anything because the computer speakers dont' make their normal noises when the phone is communicating with my wireless provider).
Can anyone suggest what I'm doing wrong? do i need to provide more information?
Download the pdf file from PapaDocta's post in 'http://forum.xda-developers.com/viewtopic.php?t=21876'. Your Connections screen should actually look like shown in the picture below. I actually needed a hard reset coz I had checked the "network connections" in the non volatile memory, and it kept loading earlier settings which caused the problem. A hard reset, and following the instructions in the pdf sorted my internet access problems out!
There seems to be a problem with my Orbit's data connection. When it is first turned on it doesn't automatically show whether I'm in GPRS or EDGE area. It just has the two opposing arrows and an "x". Tapping on this pops up a window and it states that programs will automatically choose when to use a data connection. Ok, great. That shouldn't be a problem. Connecting with PIE or Opera 8, the data connection automatically starts the connection and stays connected. Even after closing either browser. Which is good because this brings me to my problem. I also have the email program called Good loaded. If I try to start this before one of the above browser's, it will try to connect, then show it connected, then drop the connect back to the "G" or "E". 10 seconds later it trys again. It does this for 3 or 4 times then gives me an error stating "there's a problem with my data connection in the roaming area...". But, if I connect to PIE or Opera first, my email client works just fine. This is also a problem if I make/take a phone call. This closes the data connection, my email client tries to reconnect but can't.
This brings me to my questions (yeah!). Is there a registry hack to make the data connection stay connected always? Meaning after a soft reset it auto connects, and, after a call it auto connects as well? Thanks.
I have exactly the same problem. Basically I need to start IE first after a soft reset to make a connection. After that I start Goodlink to use the connection, and access to email etc. The connection also drops periodically, anywhere between 1 to 20 hours. Also, if I perform a synch using ActiveSync, I have re-start IE to get a connection again each time. Therefore, connecting and reconnecting is a issue unless you use IE.
I've used the GB-Soft Tweak, set to "GPRS Aways On", but it makes little difference. Tried to change one or two registry settings, but get message stating it's not accessible, and read-only !. I think unless anyone has any other idea's, we'll have to wait for any forthcoming ROM updates for this fix. Clearly the Artemis is having issues with GPRS connections for Goodlink, unlike it does for other applications that requires a data connection.
Other than that one major bug, works perfectly.
I've fixed mine. Made the following registry hack (mine saves so I guess it's unlocked).
Edit the following:
HKLM\ConnMgr\Provider\7C4BA38*****\TMobile U.S.
The "*****" folder may be different on your device. TMobile U.S. is what I called my Internet Connection in Connections. Your's wll be different of course. Edit the following: AlwaysOn from 0 to 1
Once I reset, the device comes up an automatically connects. No launching IE or Opera. Reconnects after a phone call too. The only time it doesn't is after connecting to a computer and using ActiveSync. Still working on this.
Hi,
Many thanks for the tip. It worked !. The issue was the Regitsry Editor I was using, not allowing access to change the registry key, but changed to PHM's Registry Editor, made the change and like yourself after soft reset, connected, and so far hasn't dropped.
Let me know if you get any work-arounds for the remaining issue i.e. after connecting to a PC using ActiveSync.
Cool! Glad it worked. I wonder if it's one of those issues where Good isn't "officially" supported on the Orbit. I work in IT and I know how vendors can be when you call them for a non-supported device.
Hi All,
I have a problem with the wireless connection on my Orbit.
When I try to connect to the internet the first time via my router I am assigned an ip address via DHCP and everything works fine. After I have left the device for a couple of minute and try to connect to the internet I just get the message Locating from the internet explorer and it will not connect to the internet unless I reboot.
I have tried the following to try and resolve.
Assign Static IP Address and DNS Servers
Removed all Encrytion and Mac Address filtering from the router.
I have tried to stream internet radio to see when it drops the connection.
Tried continuously pinging the router deafult gateway.
Disabled powersave options.
I would like the device to always stayed connected so that I can send and recieve Skype calls
Has anyone else experience this problem ?
I have exactly the same problem with you (my device is the HTC P3300) and I have tried everything you mention -apart from the ping and streaming audio - but no effect whatsoever.
I suspect that the problem lies with my wireless modem-router (USRobotics 9108) but I have yet to find something useful for it. Others I have asked have no such problem.
Someone mentioned that in "my network connects to" in the wireless network adapter settings we should check "Work" instead of "The internet". Haven't tried that yet though.
Do you have the same problem with other types of internet connection e.g via usb?
USB and GRPS work fine! It is just the wireless that has the problem, it seems like the device is loosing it's connection to the router even though it retains an ip address. When you try to ping from the phone to the router you get timeout request.
Even when you release and renew the ip address it still will not work, the only way I have found to make it work is either to reboot or turn the wireless off then back on.
I just wonder if there are any timeout values that shutdown the wireless connection after a certain amount of time?
Some remarks...
I used Media player with streaming audio via wifi and guess what? It didn't stop a couple of minutes later as I expected but kept playing for 15-20 mins. The P3300 was on power supply all the time. Then I quit from Media player and browse the net for a while. After about 5 mins... here we go again. I beleive that IE has some kind of counter that when exceeded (data, time?) it stops connecting. The funny thing is that afterwards neither media player streams nor skype worked.
On the other hand I tried skype on a new session without ever opening IE and guess what? It worked like a charm for about an hour... It never stopped responding. Now what do you make out of this?
I thought it may be IE causing the problem so I installed Netfront 3.3.
Same problem! I don't think it is the browser causing I have the same problem with Netfront.
When the connection goes I use pocket lan to ping from the phone to the router and do not get a reply.
The fact that we can stream music/video and use skype for long periods of time with out problems leads me to believe that once you initiate a constant outbound session from the phone to the router it is fine but as soon as disconnect this session this is when the problems start.
I think there maybe a registry setting for the wireless card may need changing.
I will check later and post my findings....
Any luck with our problem?
Could it be a ram allocation thing to do with IE? As I don't seem to have this problem with the WIFI but I do find that my orbit slows down to an unacceptable rate during IE use or until I use space reclaimer etc.
JC#79 said:
Could it be a ram allocation thing to do with IE? As I don't seem to have this problem with the WIFI but I do find that my orbit slows down to an unacceptable rate during IE use or until I use space reclaimer etc.
Click to expand...
Click to collapse
I don't beleive so, because my P3300 is working as it should except that it won't download any pages after a while. If I check RAM afterwards is pretty much acceptable. The machine will not slow down at all it just stops downloading as if the connection is broken (but its not).
make sure under settings/connections you have a a setting called MY ISP, if not then make a new one.
then go to settings/connections/advanced and "select networks", make sure BOTH say using "MY ISP"
then go to settings/wifi and click on network adaptors and make sure it says "my network card connects to the internet
Voila all problems solved !
hb328_dtdd said:
make sure under settings/connections you have a a setting called MY ISP, if not then make a new one.
then go to settings/connections/advanced and "select networks", make sure BOTH say using "MY ISP"
then go to settings/wifi and click on network adaptors and make sure it says "my network card connects to the internet
Voila all problems solved !
Click to expand...
Click to collapse
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
go to manage connections/add new
Thx for info, I figured it out...
no problem m8. any other problems give me a shout, I have only had the Orbit for around a week but have sussed most of the problems out including loop resets etc.
vaggoul said:
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
Click to expand...
Click to collapse
Even I havent found something like My ISP and tried but could not create one...
After connecting to WIFI when i use i-net, it starts with GPRS... similar to the problem explained above..
hb328_dtdd, could u please help...
vaggoul said:
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
Click to expand...
Click to collapse
Even I havent something like My ISP and tried but could not create one...
After connecting to WIFI when i use i-net, it starts with GPRS... similar to the problem explained above..
hb328_dtdd, could u please help...
I'm having trouble and can't figure out how to do the setting for the internet. Can anyone post a step by step guide on how to do it? TIA
When u say settings for the internet do u mean for wifi?
Yes, I mean for wifi
First of all read the manual. Or try the following. If all fails try to be more specific about your problem.
1. Make sure wireless network is up and running.
2. Press Comm Manager and press wireless icon.
3. Usually it scans automatically for nearby networks
4. If a network is found is announces the network's name and if a connection is desired.
5. You enter password (WEP, WAP, or whatever u have)
6. Connection established.
It is recommended to use in "start>settings>wireless network>power" the slider in "better performance" setting. Leave others as is.
Tip: if u open Internet Explorer before a connection is established (check for the apropriate icon) then it connects automatically with GPRS.
Network/Connection/Communication Manager for my HTC Artemis/XDA Orbit
I've got a problem with my device's connection Manager in Setting/Connection/Connection. I am able to add any connections using ISP, GPRS, bluetooth... but can only use the last one added. I have no facility to manage these connections or switch between these (this is rather strange, I've always been able to manage this on my previous devices).
I am therefore left confused with this. I have tried to download a communication manager, but this one did not work.
Any ideas from anyone?
Please reply
I often lose my data connection. Only thing I know of to do is reboot, which takes a while. Any way I can force data connection back on? I cannot choose it Comm manager.
Hi Rocky2,
I have the *exact* same problem. I don't have a solution, though.
I've tried disabling all other connections (Bluetooth, WiFi, Activesyc) but no go.
It appears that the connection must be automatically started when there is an application asking for it (e.g. PocketIE). The error mesage I get is that the "The current connection cannot be used for your request. Please end the current connection and try again."
This suggests that it thinks there is a connection, so it doesn't need to start GPRS. I haven't been able to find out which connection is active.
Mike
It's frustrating because even firing up an application that needs the connection (Outlook e-mail, for example) won't start the data connection. Instead, Outlook fails because it cannot connect to server. Maybe WM6 will be better about this.
Tmobile wm6‘s tzones starts up the data connection even after you losing it everytime I try.
Try turning off the radio, then back on. This should force a new connection.
Hi merde,
Turning off the radio doesn't work for me. Besides is very slow too (typing sim pin code..). Even with all connections disabled, some how the connection manager still thinks there is a connection.
Like rocky I'm hoping WM6 resolves it.
I'm considering a hard reset, see what that does..
Hm...
It appears I have the same problem for Wifi... Today it happened twice that I had a wifi connection but no SSID (network name). And then same problems like with the GPRS...
Strange
Mike
whenever I want to sign in to msn live messenger, my hermes tries to connect to gprs connection. even when I have free direct access to internet through wifi connection.
I tried everything but it still tries to connect.
Apart from live messenger I can connect to every type of internet service through the active wifi connection.
Is this a bug o the live messenger ?
Is there any newer version that beats this bug ?
I believe that it is a "feature" of WLM that no user actually wants but the network operators are quite happy with and probably had a say in.
Best workaround I know of is to have a network set up with no connections defined, and select that in Settings > Connections tab > Connections > Advanced tab > Select Networks. You may already have a network defined there called "Wifi" (my Orange M3100 did).
If you do that, all apps will be forced through wifi (if enabled), but if you want to use GPRS, you will have to switch the network back.
Anyone know of any apps that will make it quick and easy to change this with a single button click? I hoped that Phoneweaver would have it in the profiles but it doesn't
Disconnect from grps...then sign in to msn... then click cancel when it says "connecting"
unwired4 said:
Disconnect from grps...then sign in to msn... then click cancel when it says "connecting"
Click to expand...
Click to collapse
interesting, it works.
but if I reset, then connect to gprs for any other reason.
and then disconnect.
then it never connects to msn with no gprs connection.
after a reset it works again.
thanks for the workaround...