Related
Hello,
I can easyly syncronize with USB or Bluetooth.
I've set a WiFi connection to my ADSL router, it works fine, I can scan the LAN (with ScanIP) and see my PC, but no way to sync...
Though Active Sync 3.8 is installed.
Some of you succeeded, what's the magic ? ? ?
Thanks for sharing,
Jean-Jacques
How to guide
Have a look @ this
http://www.wifizard.com/tutorialsXP/sync/index.htm
cchris
Cool link, added to my Favorites, thnks for shareing that with us
Superb
Excellent, if only everything was explained like this, keep it up!!!!
It was already here...
I had actually found it on this forum a few months ago...
But since I had put it into my favourites I figured it would have taken me about the same time to give it you than to tell you "go and and look for it"!
Glad it helped.
Chris
I struggled with this for awhile and could not get it working. The issue was I had was in the PC WINS setting I had left the LMHOSTS Lookup enabled. As soon as I unchecked that and had the Netbios tab checked it synced up. Thanks for the link. Now I can wifi sync.
another gotcha
I read every thread I could find on several forums regarding activesync via wifi and yet I could not get it to work. Then I finally read on a thread that the PPC network card "My network card connects to:"should be set to connect to WORK not The INTERNET. I changed that one setting and bingo, activesync instantly connected via wifi (I already had a partnership created while connected via USB). Of course to have the PPC connect to the Internet via wifi, you have to set it back but that is easy enough to accomplish.
David
Re: another gotcha
dtidmore said:
Then I finally read on a thread that the PPC network card "My network card connects to:"should be set to connect to WORK not The INTERNET. I changed that one setting and bingo, activesync instantly connected via wifi (I already had a partnership created while connected via USB). Of course to have the PPC connect to the Internet via wifi, you have to set it back but that is easy enough to accomplish.
David
Click to expand...
Click to collapse
On my SX66, I don't have to change back to "the Internet" to surf; I just leave it set to "Work".
New problem...activesync connects but
Well, I had everything working, now I have a new issue. I can successfully sync via usb and BT connects. When turn off BT and then tell activesync running on the BA to sync, activesync on both the PC and the BA indicate that they are connected (as BT is off and the BA is out of the cradle, it is obvious that they are connected via WiFi at this point). Then the "looking for changes" meter starts advancing and when it gets about 1/3 of the way finished, it just stops. Both the PC and the BA still show connected and activesync still indicates that it is trying. After several minutes of the no more progress, the PC side activesync indicates that there was a synchronization error.
Any ideas. I have uninstalled activesync 3.8 and reinstalled. I have run the outlook repair utility just in case there was something weird with my outlook pst file (it was clean).
Thanks
David
I have this problem too - I find if i soft reset the unit (and sometimes my computer too) then it works fine. anyone got any ideas?
Tried the soft reset ....
I tried the soft reset on the PPC as well as rebooting the PC and still activesync stops progressing during the sync process about 1/3 of the way thru and eventually reports the synchronization error. I have noted that during BT or usb syncing, the process pauses at the same place for just a split second and then zooms thru the remaining 2/3s of the process. It is like activesync is waiting for somekind of a handshake or acknowledgement from the PPC. I hope someone can shed some light on this.
david
Re: Tried the soft reset ....
dtidmore said:
I tried the soft reset on the PPC as well as rebooting the PC and still activesync stops progressing during the sync process about 1/3 of the way thru
Click to expand...
Click to collapse
Have you tried turning off synchronise 'Files' in the activesync options? sometimes funny files can cause this problem?
Only syncing...
The only things I am trying to sync are my contacts, tasks and calendar. I even tried unchecking even those items so that I was essentially NOT syncing anything but activesync via WiFi still stalls at about 1/3 complete. As I did have WiFi/ActiveSync working for a day or so with NO issues and nothing has changed (or I guess I should say, I changed nothing), this is a real mystery.
David
Is there a way to disable the internet passthrough in activesync? I use a remote software that allows me to use my phone on my PC when docked, SOTI pocket controller. So I like being docked at work, however (this is where this question gets weird)... my work has disabled the port to access MSN messenger on our network, I want to be able to sign in from time to time so I thought using my PPC would be great! However the internet passthrough in active sync means that it won't access the MSN messenger port either, because it's using the same network, so if I undock and connect using GPRS I can use messenger, so what I want to do is be docked still but have my device use GPRS internet instead of the passthrough, this way I can sign on to messenger while docked. Does this make sense? Respond if I'm not being clear enough. I have found web versions of messenger that work, it's just too slow for me and gets in the way, if I could use my PPC it would be just perfect! Thanks in advance, it's a weird one so hopefully someone will have a suggestion that will tickle my fancy out there!
I would like to know the answer to this as well. I have GL installed and cannot retrive new messages while my SX66 is docked.
As much knowledge as there is out there, this one seems to have the experts stumped.
Lots of people asking the question on the net and no answers.
I'm surprised no one has replied to this yet.... It's actually pretty easy to fix. Right click the ActiveSync icon in your tray and click connection settings, change "this computer is connected to" from 'the internet' or 'automatic' to work network. Your phone should no longer look for a connection through AS on these settings.
Doesn't work for me. The wireless data connection is immediately terminated on the phone once the USB cable is plugged in, regardless of how the XP ActiveSync software is configured.
That's rather odd, I used to do just that to make my AIM go through my phone rather than the computer while using MyMobiler.
gboybama said:
As much knowledge as there is out there, this one seems to have the experts stumped.
Lots of people asking the question on the net and no answers.
Click to expand...
Click to collapse
have you tried the 'This computer is connected to:' and select 'Work Network', in the Connection settings dialogue box?
edit1: wow, typed this weeks ago, Google chrome saved the page till today...
edit2: on your phone, In connection settings in My Work Network, under the Proxy Settings tab, is 'This network connects to the internet' ticked? try un-ticking it if it is...
Work or "The Internet" it doesn't matter what I select on ActiveSync. It still disables the H on my phone as soon as I connect the USB cable.
For connections on my phone, all I have even in the list of connections is MEdia Net. I can't uncheck Internet there or else I wouldn't get Internet while disconnected.
Despite the fact that my only existing connection on the Settings/Connection page is MEdia Net and that only is set for "Cellular Line (GPRS, 3G)" I still can only access the Internet through my work server when connected to my work desktop.
I noticed the same behavior when syncing via Bluetooth. As soon as the connection with ActiveSync is established, wireless connectivity is shut off.
My apologies for the kick, but if someone knows the aswer, please enlighten me!
I cannot disable the internet pass-through either, not even when I select "Network (work)" in "This computer is connected to" in the Windows Mobile Device Center (The Vista version of ActiveSync).
I have set-up Exchange on my phone, which connects to domain.com. My Exchange server runs in my network, so when I connect the phone it should connect to 192.168.1.2 instead of domain.com. If it would stay on HSDPA, then the connection would remain OK. Because of this, it won't sinc with my PC either, because it keeps hanging on connecting to ActiveSync (of which the server cannot be resolved).
Many thanks to the person who knows the answer!
This thing is a bigger pain than it should be, that's for sure. I think I got it working - simultaneously syncing via Exchange over GSM and locally through USB (obviously not the same items).
In my setup Contacts, Calendar, E-Mail, and Tasks are using the mobile network to connect to our Exchange server's external Push interface. Notes, Mobile Favorites, Files, and OneNote are syncing through USB or Bluetooth (I tried both) when I connect locally.
I'm currently running Vista on this PC so things might be different on XP or Windows 7. On the PC in Windows Mobile Device Center I enabled "Allow data connections on device when connected to PC" and changed "This computer is connected to:" Work Network.
In Windows Mobile, in the connections manager, edit the existing connection. MEdia Net shouldn't have a proxy set and under the Advanced tab click Select Networks - if the "Programs that automatically connect to a private network" is set to My Work Network then make sure and edit the settings to have "This network connects to the Internet" unchecked. Or alternatively, just change the private network to be Media Net as well. That should do it.
On your pc if you open up ActiveSync and go to file>connection settings and make sure "allow wireless connection on device when connected to the desktop" is checked you should be able to keep your mobile internet connection up while still connected to a pc.
There seems to be a problem with my Orbit's data connection. When it is first turned on it doesn't automatically show whether I'm in GPRS or EDGE area. It just has the two opposing arrows and an "x". Tapping on this pops up a window and it states that programs will automatically choose when to use a data connection. Ok, great. That shouldn't be a problem. Connecting with PIE or Opera 8, the data connection automatically starts the connection and stays connected. Even after closing either browser. Which is good because this brings me to my problem. I also have the email program called Good loaded. If I try to start this before one of the above browser's, it will try to connect, then show it connected, then drop the connect back to the "G" or "E". 10 seconds later it trys again. It does this for 3 or 4 times then gives me an error stating "there's a problem with my data connection in the roaming area...". But, if I connect to PIE or Opera first, my email client works just fine. This is also a problem if I make/take a phone call. This closes the data connection, my email client tries to reconnect but can't.
This brings me to my questions (yeah!). Is there a registry hack to make the data connection stay connected always? Meaning after a soft reset it auto connects, and, after a call it auto connects as well? Thanks.
I have exactly the same problem. Basically I need to start IE first after a soft reset to make a connection. After that I start Goodlink to use the connection, and access to email etc. The connection also drops periodically, anywhere between 1 to 20 hours. Also, if I perform a synch using ActiveSync, I have re-start IE to get a connection again each time. Therefore, connecting and reconnecting is a issue unless you use IE.
I've used the GB-Soft Tweak, set to "GPRS Aways On", but it makes little difference. Tried to change one or two registry settings, but get message stating it's not accessible, and read-only !. I think unless anyone has any other idea's, we'll have to wait for any forthcoming ROM updates for this fix. Clearly the Artemis is having issues with GPRS connections for Goodlink, unlike it does for other applications that requires a data connection.
Other than that one major bug, works perfectly.
I've fixed mine. Made the following registry hack (mine saves so I guess it's unlocked).
Edit the following:
HKLM\ConnMgr\Provider\7C4BA38*****\TMobile U.S.
The "*****" folder may be different on your device. TMobile U.S. is what I called my Internet Connection in Connections. Your's wll be different of course. Edit the following: AlwaysOn from 0 to 1
Once I reset, the device comes up an automatically connects. No launching IE or Opera. Reconnects after a phone call too. The only time it doesn't is after connecting to a computer and using ActiveSync. Still working on this.
Hi,
Many thanks for the tip. It worked !. The issue was the Regitsry Editor I was using, not allowing access to change the registry key, but changed to PHM's Registry Editor, made the change and like yourself after soft reset, connected, and so far hasn't dropped.
Let me know if you get any work-arounds for the remaining issue i.e. after connecting to a PC using ActiveSync.
Cool! Glad it worked. I wonder if it's one of those issues where Good isn't "officially" supported on the Orbit. I work in IT and I know how vendors can be when you call them for a non-supported device.
Hi All,
I have a problem with the wireless connection on my Orbit.
When I try to connect to the internet the first time via my router I am assigned an ip address via DHCP and everything works fine. After I have left the device for a couple of minute and try to connect to the internet I just get the message Locating from the internet explorer and it will not connect to the internet unless I reboot.
I have tried the following to try and resolve.
Assign Static IP Address and DNS Servers
Removed all Encrytion and Mac Address filtering from the router.
I have tried to stream internet radio to see when it drops the connection.
Tried continuously pinging the router deafult gateway.
Disabled powersave options.
I would like the device to always stayed connected so that I can send and recieve Skype calls
Has anyone else experience this problem ?
I have exactly the same problem with you (my device is the HTC P3300) and I have tried everything you mention -apart from the ping and streaming audio - but no effect whatsoever.
I suspect that the problem lies with my wireless modem-router (USRobotics 9108) but I have yet to find something useful for it. Others I have asked have no such problem.
Someone mentioned that in "my network connects to" in the wireless network adapter settings we should check "Work" instead of "The internet". Haven't tried that yet though.
Do you have the same problem with other types of internet connection e.g via usb?
USB and GRPS work fine! It is just the wireless that has the problem, it seems like the device is loosing it's connection to the router even though it retains an ip address. When you try to ping from the phone to the router you get timeout request.
Even when you release and renew the ip address it still will not work, the only way I have found to make it work is either to reboot or turn the wireless off then back on.
I just wonder if there are any timeout values that shutdown the wireless connection after a certain amount of time?
Some remarks...
I used Media player with streaming audio via wifi and guess what? It didn't stop a couple of minutes later as I expected but kept playing for 15-20 mins. The P3300 was on power supply all the time. Then I quit from Media player and browse the net for a while. After about 5 mins... here we go again. I beleive that IE has some kind of counter that when exceeded (data, time?) it stops connecting. The funny thing is that afterwards neither media player streams nor skype worked.
On the other hand I tried skype on a new session without ever opening IE and guess what? It worked like a charm for about an hour... It never stopped responding. Now what do you make out of this?
I thought it may be IE causing the problem so I installed Netfront 3.3.
Same problem! I don't think it is the browser causing I have the same problem with Netfront.
When the connection goes I use pocket lan to ping from the phone to the router and do not get a reply.
The fact that we can stream music/video and use skype for long periods of time with out problems leads me to believe that once you initiate a constant outbound session from the phone to the router it is fine but as soon as disconnect this session this is when the problems start.
I think there maybe a registry setting for the wireless card may need changing.
I will check later and post my findings....
Any luck with our problem?
Could it be a ram allocation thing to do with IE? As I don't seem to have this problem with the WIFI but I do find that my orbit slows down to an unacceptable rate during IE use or until I use space reclaimer etc.
JC#79 said:
Could it be a ram allocation thing to do with IE? As I don't seem to have this problem with the WIFI but I do find that my orbit slows down to an unacceptable rate during IE use or until I use space reclaimer etc.
Click to expand...
Click to collapse
I don't beleive so, because my P3300 is working as it should except that it won't download any pages after a while. If I check RAM afterwards is pretty much acceptable. The machine will not slow down at all it just stops downloading as if the connection is broken (but its not).
make sure under settings/connections you have a a setting called MY ISP, if not then make a new one.
then go to settings/connections/advanced and "select networks", make sure BOTH say using "MY ISP"
then go to settings/wifi and click on network adaptors and make sure it says "my network card connects to the internet
Voila all problems solved !
hb328_dtdd said:
make sure under settings/connections you have a a setting called MY ISP, if not then make a new one.
then go to settings/connections/advanced and "select networks", make sure BOTH say using "MY ISP"
then go to settings/wifi and click on network adaptors and make sure it says "my network card connects to the internet
Voila all problems solved !
Click to expand...
Click to collapse
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
go to manage connections/add new
Thx for info, I figured it out...
no problem m8. any other problems give me a shout, I have only had the Orbit for around a week but have sussed most of the problems out including loop resets etc.
vaggoul said:
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
Click to expand...
Click to collapse
Even I havent found something like My ISP and tried but could not create one...
After connecting to WIFI when i use i-net, it starts with GPRS... similar to the problem explained above..
hb328_dtdd, could u please help...
vaggoul said:
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
Click to expand...
Click to collapse
Even I havent something like My ISP and tried but could not create one...
After connecting to WIFI when i use i-net, it starts with GPRS... similar to the problem explained above..
hb328_dtdd, could u please help...
I'm having trouble and can't figure out how to do the setting for the internet. Can anyone post a step by step guide on how to do it? TIA
When u say settings for the internet do u mean for wifi?
Yes, I mean for wifi
First of all read the manual. Or try the following. If all fails try to be more specific about your problem.
1. Make sure wireless network is up and running.
2. Press Comm Manager and press wireless icon.
3. Usually it scans automatically for nearby networks
4. If a network is found is announces the network's name and if a connection is desired.
5. You enter password (WEP, WAP, or whatever u have)
6. Connection established.
It is recommended to use in "start>settings>wireless network>power" the slider in "better performance" setting. Leave others as is.
Tip: if u open Internet Explorer before a connection is established (check for the apropriate icon) then it connects automatically with GPRS.
Network/Connection/Communication Manager for my HTC Artemis/XDA Orbit
I've got a problem with my device's connection Manager in Setting/Connection/Connection. I am able to add any connections using ISP, GPRS, bluetooth... but can only use the last one added. I have no facility to manage these connections or switch between these (this is rather strange, I've always been able to manage this on my previous devices).
I am therefore left confused with this. I have tried to download a communication manager, but this one did not work.
Any ideas from anyone?
Please reply
When configuring Activesync, you would choose which connection for it to use to sync with exchange server and in the WM5 I would pick My ISP but on the WM6 "Internet" is the only options in the drop down menu.
Shouldn't it be listing all avaiable connections you have added in the Connection settings?
Maybe a bug? or is there a setting where I select connection type for "Internet" on WM6?
Thanks
Bill
In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?
mrvanx said:
In the connections dialogue you select what My ISP (or whatever you use, i.e mine is 'O2') connects to, which is usually the internet.
When you set activesync to connect via the internet it will use ANY connection which does just that. So if you are connected via the USB to your pc it will connect to the internet through that. If you are disconnected from your PC it will use your GPRS instead.
I dont think it is a 'bug' really. Does your activesync work as desired?
Click to expand...
Click to collapse
Yeah Activesync seem to be working fine but in WM5 it wouldn't work with connections that uses proxy and it would allow me to select a connection in the drop down menu that doesn't have proxy setting ie "My ISP"
Perhaps the new Activesync now works with proxy.
As far I can tell it's working fine.
Mine does not - I have to manually use activesync to get mail from the Exchange Server. Push does not seem to work. There is another thread on this here:http://forum.xda-developers.com/showthread.php?t=297781
It is really annoying me at the moment as I canot find a workaround.
It seems that activesync can find the GPRS when I do a manual Sync, but has a warning that i do not have a cellular internet connection. Odd. I originally used the Orange .cab files to set up the connections, I then deleted them and recreated the connection manually which made no difference.
Any ideas would be welcome!
I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet
well i also have WM 6 installed on my device and when i configured AS to sync with mail2web exchange server it stopped accessing the Internet when connected to the PC via USB/ AS.... whenever i try to access the Internet when the device is cradled the device opens the GPRS connection and connects to the net.... how do i get AS to connect to the net when cradled and not GPRS... and the exchange sync gives an error MSG 85020006...
someone please help me.... its really very frustrating not being able to connect to the net when connected via USB/ AS...
thank u
nahguam said:
I have a similar problem. I'm not sure if it's the same or not. Help would be appreciated...
When my Hermes is roaming everything in hunky-dory, GPRS, HSDPA, Push-Email... all is running smooth. BUT...
When I Activesync (I have "Allow wireless connection on device when connected to the desktop" unchecked - as advised in this thread), the hermes initially drops any wireless connections, then, instead of using the PC's broadband (as per WM5 & Activesync 4.2) to sync with Exchange it tries to dial up to GPRS again. Sync ultimately fails with error code 85020006. This webpage says the problem is "The Connection Manager could not find a path to the destination.
- OR -
Unable to connect. Verify your dialup or proxy settings are correct, and try again"
This is annoying as I have SPB Insight installed which I want to use the PC's connection to update all the channels, as well as sync with Exchange.
EDIT: I tried this before among other things and it didn't work but now it seems to be working OK. The only thing I can think that has fixed it is changing "This computer is connected to:" The Internet
Click to expand...
Click to collapse
This solved my problem....thank you so much!