Related
I have got this weird problem with my Qtek 9090, I can’t hear a thing from the speaker except incoming calls??? And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
I tried with few other rom, but no success! I even tried with WM5
Could this have anything with the headset plug? Cuse when the headset is plugged (in normal case) you can only hear incoming calls from the phone!
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Guest said:
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Click to expand...
Click to collapse
dude, thanks for trying to help, but you should know better. flashing with a new rom erase everything including the the BT profile. I still think the problem is the headset jack.
And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
Click to expand...
Click to collapse
This is telling me that you DID install the bluetooth again, and so you have a bluetooth profile, what is causing the no sound problem!
I have exactly the same problem as you.. When I remove the bluetooth profile all is working fine again.. that is.. untill I set it up again, and use it.. Than the SAME problem is back.
thank alot , but still got the problem even with the BT-profile removed, I have to use the wired headset to be able to hear anything
Problem Solved :lol: :lol: :lol:
I Opened the damn thing and took a look at the 2,5mm jack and guess what, it was broken ( I remember dropping the phone once for a week ago), I just removed it ( I don’t use the headset but I need the speaker), and everything is loud and clear now,
and with a Sprite Backup file I’m back now :twisted:
!!!?
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Re: !!!?
hishnik said:
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Click to expand...
Click to collapse
I read in another post somewhere that there is a microswitch in/near the headphone jack that switches off the sound to the speaker. Apparently, if it sticks, you poke a paper clip in and twiddle it about and you'll free it.
no sound form jasjar
having same problem. poked around with paperclip and all that, but still no sound. dont need headphone jack because hoping to use latest a2dp hack form latest rom for jasjar to be able to use BT headset. will removing headphone jack affect using BT headphones? need external sound.
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
just got my jasjar back after having cracked lcd and headphone jack replaced. sent to http://www.pocketpctechs.com out of california as suggested by very helpful user on this site. cost me around $20 dollars and took only a day to fix. works fine now!
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Well I sure hope there is atleast one person in this world that has my problem and has a solution.
I am a truck driver and own the Blue Parrot B150 Professional Headset. If you own one of these then you know how extremely good it is at voice quality. Most if not all calls sound like the person is sitting directly next to you. I went through 5 diferent headsets before coming to this one and discovering that there was a good bluetooth headset after all. It doesnt matter how noisy the environment is this headset will ALWAYS be loud and clear enough to let you enjoy your conversation...
BUT, if you own a Herm100 then you may be having a problem like I am. The official rom and the at&t official rom BOTH work perfectly with my headset. The moment the phone is turned on both devices connect and it never disconects as expected and I can answer calls with only the headset ALL day long. But the moment I try a WM6 rom ANY wm6 rom I can not for the life of me keep the devices connected and it is very irritating. I have to physically pick up the phone, take my eyes off the road while driving a 80,000 lb vehicle at 65mph on the highway, and ask it to use the headset. If a phone call comes in it only comes in on the 8525, unless I just happen to have ESP and realize a call is about to come in and hurredly ask the devices to reconnect before the call comes in. The instant the phone call is over the two devices lose their connection completely and the whole process starts over. Absolutely USELESS as a handfrees system.
I hate WM5 and love WM6. So, I want to know if I got a bad 8525 and need to toss it out and try a diferent phone or is there hope for this 8525 someday... I cant be answering my device with my hands and risking killing people.
Any help would be appreciated please.
Wow what an amazing amount of advice. I will try what post #2 has suggested and go back to WM5 since WM6 does not have a properly working BT stack...
Thanks
Which WM6 ROM did you try??
The VERY LATEST WM6 ROMs have fully working BT stacks.....try Black Majik.
mrvanx said:
Which WM6 ROM did you try??
The VERY LATEST WM6 ROMs have fully working BT stacks.....try Black Majik.
Click to expand...
Click to collapse
Yeah your thinking just like I am. I just tried Majik about an hour ago and it was VERY nice but Im on Cingular 8525 and it messed up my keyboard buttons unfortunately. Hopefully one of these Hybrid roms everyone is making as of late will solve the broken bt. I managed to fix the bt headset not keeping its connection but every now and then BT will just completely turn off and you need to turn it back on. Cant believe MS went RTM with a broken BT stack...
SkOrPn said:
Yeah your thinking just like I am. I just tried Majik about an hour ago and it was VERY nice but Im on Cingular 8525 and it messed up my keyboard buttons unfortunately. Hopefully one of these Hybrid roms everyone is making as of late will solve the broken bt. I managed to fix the bt headset not keeping its connection but every now and then BT will just completely turn off and you need to turn it back on. Cant believe MS went RTM with a broken BT stack...
Click to expand...
Click to collapse
The cingular keyboard fix cab file is kicking about on this board it is very well documented. Just download it and install and youl be fine.
mrvanx said:
The cingular keyboard fix cab file is kicking about on this board it is very well documented. Just download it and install and youl be fine.
Click to expand...
Click to collapse
Yeah thanks mrvanx, I figured that out as well. I have to move into a new apartment today so I cant mess with this anymore. Once I am settled I will try going back to a WM6 rom and see if I cant fix all my issues.
Really like the Black roms look the most though so I might in the end be using them.
Hello,
I tried many kind of WM6 and 6.1 ROMs and faced the same problem with different frequency rate: my bluetooth headsets disconnect very often (also during phone calls) and actually I don't have any idea what should be the problem.
The HW I have is: H200 with Logitech BT mobile pro and Plantronics voyager 510 (of course not together the latters).
I tried different radio versions and different roms: the only variance is the "well-work" period. If it lose the connection I have to set off/on the BT in connection manager. Does anybody have this problem or know the root cause/soution to fix? I really appreciate any kind of help/suggessions.
Thanks
I have the same problem as you... I tried WM5 and WM6 (Official Spanish ROMs) and no solution found. My hardware is H200 and Parrot CK3000Evo. I think may be a hardware problem. Any help please???
vampirox said:
I have the same problem as you... I tried WM5 and WM6 (Official Spanish ROMs) and no solution found. My hardware is H200 and Parrot CK3000Evo. I think may be a hardware problem. Any help please???
Click to expand...
Click to collapse
Don't think there's any easy answer. Often seems to be a combination of headset firmware and BT settings in your WM device.
There are good discussions of some of the problems and issues in this thread and this thread.
Other than that, you could try different firmware versions for your headsets - that solved my problem with a Jabra 8010 (till it just crapped out completely).
Alternate solution is to cut the crappy earphones off your standard USB headphone and solder on a 3.5mm stereo plug. I haven't quite got to that stage yet, but have come perilously close many times.
e_gregious said:
Don't think there's any easy answer. Often seems to be a combination of headset firmware and BT settings in your WM device.
There are good discussions of some of the problems and issues in this thread and this thread.
Other than that, you could try different firmware versions for your headsets - that solved my problem with a Jabra 8010 (till it just crapped out completely).
Alternate solution is to cut the crappy earphones off your standard USB headphone and solder on a 3.5mm stereo plug. I haven't quite got to that stage yet, but have come perilously close many times.
Click to expand...
Click to collapse
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
_sasa_ said:
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
Click to expand...
Click to collapse
I want to use for phonecalls too. I'm sure there is a bluetooth problem, perhaps a hardware problem. I have same problems using BT GPS...
I have the same issue with my Cardo headset and my BTGPS unit.
On a call and the headset cuts out and call diverts to handset.
BTGPS working fine then suddenly no connection to BTGPS.
Are any of you using MS Voice Command with BT Fix? My problems seem to have started right around the time I began using it. Before that I don't recall having any headset drops. Can not say the same about GPS as I've only had it a short time and have not un installed VC to test.
BTW. I'm using the stock WM6 update and radio for AT&T 8525 H100 hardware.
Heykrop said:
Are any of you using MS Voice Command with BT Fix? My problems seem to have started right around the time I began using it. Before that I don't recall having any headset drops. Can not say the same about GPS as I've only had it a short time and have not un installed VC to test.
Click to expand...
Click to collapse
I'm not using voice command, and i probe it using clean official WM5 and WM6 ROM. Today I installed schaps WM6 ROM, but i have the same problem.
I have the same problem too. It will be ok for a few days, then wont be able to use BT (Plant 250). Then either I have reset the phone or turn off BT in phone and turn it back on, then it will work.
I believe it is a hardware issue, cuz I had a 8525 before, and never had this issue. But with the set I got now, its been a problem from day one.
I don't use voicecommand at all. The strange thing is that I use a Nokia BT GPS and it works fine always: no disconnection on long trips neither.
_sasa_ said:
no disconnection on long trips neither.
Click to expand...
Click to collapse
Do you use headset and BT GPS at same time? When headset disconnects BT GPS still working?
vampirox said:
Do you use headset and BT GPS at same time? When headset disconnects BT GPS still working?
Click to expand...
Click to collapse
Yes, the HS is dropping but the GPS still working forward. Strange, but because of that I think it's not HW problem.
_sasa_ said:
Do you think it refer to the A2DP problem? I don't want to use my HS to listen to music; otherwise these aren't A2DP compliant neither. I just want to use for phonecalls as it designed for.
Click to expand...
Click to collapse
Sorry if I mislead you with the A2DP stuff. Didn't realise you were having issues with just the basic audio.
As I mentioned in the other post, though, there seems to be compatibility issues between the MS BT stack and some headsets. Changing ROMs probably won't help, because they still all use the same BT stack. Better to try playing round with the headset - see if you can change firmware in that, if possible.
I know there are some people trying to port the Widcomm BT stack to WM6, but I haven't heard of any real success yet.
I flashed the alltel update and then JD's wm6.1 test. I had sound at that point but somwhere along the line of adding back my apps I lost sound to the hardware speaker and wired headset. My bluetooth headset still works though.
I've loaded a number of different audiopara files one for 6.1 specifically and still no sound.
help?
aikidoka-mks said:
I flashed the alltel update and then JD's wm6.1 test. I had sound at that point but somwhere along the line of adding back my apps I lost sound to the hardware speaker and wired headset. My bluetooth headset still works though.
I've loaded a number of different audiopara files one for 6.1 specifically and still no sound.
help?
Click to expand...
Click to collapse
have you read up on the specific roms thread? perhaps this is a known issue with the current release.
besides that, i would just say you got a bad flash and to:
1) hard reset
2) flash again
3) hard reset
and see if that works, good luck.
I lost sound again today when I installed srs wow hd. It might be that installed 2 different versions and they conflicted.
Everythings fine now. making sure I back up with spb again though lol
For some reason my microphone doesnt work during calls at all in android. i tried 1.5 and 1.6 some months ago and because the mic didnt work i didnt use it at all. once i heard they had 2.1 out i got it on and still, no microphone during calls. i thought 2.1 would have fixed the problem, but obvioulsy its an issue with my phone.
is this just a setting i need to change? i tried searching the 2.1 elcair forum and i didnt find anything about anyone elses mic not working. during a call i can hear the other person pefectly, they just cant hear me.
also, the speaker doesnt work, for ringtones and such. is this still an issue that hasnt been resolved, or is it a problem again with my phone. when i try to change the ring tone it freezes the program and i have to force quit.
any help would be awesome and would make me happy. THX
(im just trying to get it to work, i plan on upgrading to the HTC Evo 4g when it is released)
could this be because my default.txt isnt set up correctly?
I have audio problems with calls if I use the voice search feature. Are you using any kind of voice input methods before trying to make a call?
Also, on the builds I have tried (haven't upgraded in a while) the speakerphone feature wasn't working. They may have fixed that in the newer builds, I don't know.
no i havent been using anything else on there... just no mic during calls. its the first thing i test every time i reinstall android. and still nothing. and yes, my mic works in windows mobile every time i reboot.
im aware the speakerphone doesnt work... but i thought that was only during calls as a speaker phone. does the speaker work for ringtones? or was that what wanst working.
the mic works in all builds and the speakerphone works for both donut and eclair with the newer builds, after applying the updates. Make sure you have the latest radio flashed.
latest radio?
that would be why i bet... im running radio version 1.27.14.09
Mic issue.
I'm glad someone starting this tread I was about to. I've been dying to get android because I thought sipdroid was going to be a good voip solution. Tried it on a G1 and realized it isn't. Now I hear about sipagent, and that I hear works. Since it uses the mic at an application level and not the radio level I've been waiting to hear that voice search works cause that implies droid on kaiser is ready for voip development/beta testing.
So can anyone confirm that the mic is fixed, and that the voice search feature is working within some build?
updated the ROM and radio based on the file at the htc website...
WORKS NOW!!!
im so happy. thx. and yes now the speaker works also and plays ringtones. the speakerphone doesnt work, but atleast it doesnt freeze the phone when you click on the button.
pardonmyownage, can you tell me if voice search causes the phone lose its mic?
tyler51773 said:
pardonmyownage, can you tell me if voice search causes the phone lose its mic?
Click to expand...
Click to collapse
I experienced the same. Definitely voice search caused this problem. After re-installation, it's going well.
Too bad I had to drop Android because the microphone issue. I can listen to the people on the phone, but they can't hear what I say. . I have tried 1.70.xx, 1.71.xx, 1.65.24.36 radios, but none of them works. Anybody help me plz , I'm dying for Android (
Kurt Cobain said:
Too bad I had to drop Android because the microphone issue. I can listen to the people on the phone, but they can't hear what I say. . I have tried 1.70.xx, 1.71.xx, 1.65.24.36 radios, but none of them works. Anybody help me plz , I'm dying for Android (
Click to expand...
Click to collapse
I have the same issue! Please, anyone can help us?
I can't find a clear solution.. the people says that changed Radio and works, but WHAT Radio?!
Pls help us!!!
Recommended radio is anything from 1.65.xx.xx up to 1.71.xx.xx, although some find 1.65 better, there are others who find 1.71 better, but audio issues are normally associated with radio lower than 1.64.xx.xx.
If you have a lot of 'no service' issues then change to a radio at the other end of the scale, e.g. if you are on 1.71 then try 1.65, if on 1.65 try 1.71.
From what I have seen so far 1.71 works best for US, 1.65 for europe, not enough data on other areas to say for certain about anywhere else tho.
Just remember, if you are on a radio lower than 1.65 you are more likely to have audio, especially mic issues.
thanks Zenith! Now I have the microphone works!
It works with radio 1.65.16.25
Instructions (for original Kaiser with wm6 and radio 1.27.x.x):
1 - Copy JumpSPL1.93-KAIS.exe to internal memory and Run from cellphone
2 - When show "USB" on cell screen, remove the USB cable and plug it again
3 - In the ActiveSync on PC, Disable USB conections on Settings
4 - Run from computer KaiserCustomRUU.exe.. and next, next...
Here, HardSPL 3.29 it's allright!
5 - To install WM 6.1, run from the computer: UU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe with cell connected on USB.
So.. I used Myn's Warm Donut from thread [ANDROID] Myn’s Warm Donut - [RLS 5 - 04/24/2010] and I have a Android Phone!
thanks