hello gays, i have terrible problems with 1.15 radio rom and make soft reset very often. pls advise me which radio is th best for exec ??? 10x in advance
darkheroz said:
hello gays,
Click to expand...
Click to collapse
First of all, it's "guys" not "gays"...
It actually depends on your location. you gotta try each of them yourself.
Check installed software first: hard reset and use it clean.
I am sure that problem is in radio rom. Please advise which rom ver is suitable for Bulgaria, Europe.
What's the problem?
I knew it's very high power consumption.
shymeng said:
What's the problem?
I knew it's very high power consumption.
Click to expand...
Click to collapse
hi, yes this is one of the problems. another is that system stop responding
from time to time, for me - 2-3 times per day.
what to do ???
DaVince said:
First of all, it's "guys" not "gays"...
Click to expand...
Click to collapse
Hey, he might not have been speaking to you . Each to his own
!.09 worked fine on my Exec on T-mob UK but was awful with jwrights WM6. 1.06 was better but 1.15 is the best so far - I still get the 'no modem at this number' wheb it tries to reconnect GPRS/3G but it's the best available for me - yet to find a perfect 1.
according to my experience,radio1.13 is way too high consumption than 1.15?is that true?which one is the best for indonesia?
DaVince said:
First of all, it's "guys" not "gays"...
It actually depends on your location. you gotta try each of them yourself.
Click to expand...
Click to collapse
ohhhh excuse me... I mean guys of course
ok I will cont to use 1.15 damn it..
It working fine in Russia
Have no problems with GPRS or GSM. And other features I dont using.
Radio 1.15.0 - GSM ok but fails to do Wifi+WPA_PSK
From all the Radio versions I tested this is the first image that fails to connect to Wifi networks secured with WPA.
I swithced my WRT54G to WEP security and everything connects.
Related
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
peter7 said:
Hi community - I updated to VP3G and now either the red button nor the end button finishes the call - this is bad - any idea what I can do ?
Click to expand...
Click to collapse
Tough to answer with any certainty without knowing more details. Could be your radio - I had that same problem with some radios. Since going with this ROM I have not had the problem. Also what apps do you have loaded?
Mark.
peter, it is something you have done as no one else has had this issue.
What radio? What software have you installed? Using a different Dialer? Hard reset?
We need more information besides "it doesn't work".
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Thanks
Berd
Yes first I thought it is the radio so I switched to Radio 1.43 but the problem is still there. Now I found out it is more the case when I`m connected via GPRS that the button as well as the "end" software button dòn`t work ...
Applications which I use - no extra phon software, but magic button or the as follows: sk software, skype, sprite backup, webis etc.
It's your hardware controller card, gone bad. After some time all of your front button will stop responding. I had the same problem, sent to Dopod service center and got it fixed.
Its not any of ROM issues what so ever. Its a common defect of some earlier batch, as told by the techies at the Service Center.
berdinkerdickle said:
And as long as we're giving advice, this forum prefers possible concerns or issues be posted in the already available thread.
For example; if you're having problems with Black Majik, no need to start another thread, just post in the already available thread.
Click to expand...
Click to collapse
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
PLs help
please remember this is a Dev forum and I believe you answered your own question try flashing another ROM and see if that fixes it. I have no idea about updated GPRS software - you mean a radio ROM? just flash another OS and see if that works its not a problem with 3Gvp's rom but maybe you had a bad flash
vp3G said:
Heh, I made the same assertion once and was told on no uncertain terms that I was wrong.
Click to expand...
Click to collapse
LOCK:Enabled
EXEC:\xda-developers\HiJack.exe
Forum Rules:
http://forum.xda-developers.com/announcement.php?f=355
And Particularly this comment:
pof said:
post a comment to the relevant thread instead of starting a new one.
Click to expand...
Click to collapse
END: HiJack.exe
LOCK: Disabled
RST: Reset
@berdinkerdickle: Yep, at the time I cited that stuff too... and was told by a certain mod that I was still wrong!
peter7 said:
It seems that it is not the hardware because it is wonderful working when I`m not online with GPRS or 3G !
So what elese can I do ? Should I try another ROM or can I just install an updated file for the GPRS issue ?
Click to expand...
Click to collapse
Hmmm... that's an interesting twist on the problem I've never heard before. I would suggest a) hard reset b) reflash my ROM c) flash another ROM. I'd probably also go with a Cingular version of the radio for now ... 1.40 or 1.48.
VP - shouldn`t I start with a new radio rom version before I reinstall your ROM ??? At the moment I`m using the 1.43 version
Up to you, but I thought you said you'd already changed radios. I'd probably go for the hard reset and see if it works before installing anything else.
Hi VP, your advice worked - I changed to ROM 1.48 and now when I dial the online connection is stopped and reactivated after the phon call.
THANK you so much !!!!!!!!!!!!!!!
Best regards
from Germany
Active Sync Error
VP - it´s again me - pls can you look at my problem: My Tytn is telling me -in the meantime several times a day -that I have to resynchronize and after I got the warning to resynchronize there comes the next warning that there is no IP number !
Where can I find the change log of Radio-Roms?
I think, I have used and swapped between all of those (from 1.50.. to 1.38..)
Believe me or not, I didn't see any single difference.
Presently using 1.38....
Thanks,
I do not think there is any official changelog of the radio versions but you should notice differences:
- 1.46.00.11 update voor WM6, improved battery life
- 1.46.30.11 update for 3G (correct me if I'm wrong)
- 1.58.00.11 asia update, why I do not know
T-Rob said:
I do not think there is any official changelog of the radio versions but you should notice differences:
- 1.46.00.11 update voor WM6, improved battery life
- 1.46.30.11 update for 3G (correct me if I'm wrong)
- 1.58.00.11 asia update, why I do not know
Click to expand...
Click to collapse
Hmm, thanks for the info T-Rob. Then it's time for 1.58... later on...
provat said:
Hmm, thanks for the info T-Rob. Then it's time for 1.58... later on...
Click to expand...
Click to collapse
I had no problems with 1.58.00.11, perhaps even the best GSM but the worst fix for GPS.
T-Rob said:
I had no problems with 1.58.00.11, perhaps even the best GSM but the worst fix for GPS.
Click to expand...
Click to collapse
To tell you the truth, and again, believe me or not, the best performance I had in gps is 1.38.. Rest are all same-same. "Old is gold" . Strange that very few people are interrested here to optimize an ideal radio rom compared to a complete rom.
T-Rob said:
I had no problems with 1.58.00.11, perhaps even the best GSM but the worst fix for GPS.
Click to expand...
Click to collapse
T-Rob, Could you please upload your radio version 1.58.
Thanks!
provat said:
T-Rob, Could you please upload your radio version 1.58.
Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio
provat said:
"Old is gold"
Click to expand...
Click to collapse
Sure, using Windows 3.1 lately ?
Stingray66 said:
Sure, using Windows 3.1 lately ?[/
Sorry, but I didn't get you. I am talking about the driver as it's still not clear the different advantages of different radio driver versions, and not the os.
If you are talking about the os, then wm6 is much more performing and fast for the arm type of processors.
Click to expand...
Click to collapse
Stingray66 said:
Sure, using Windows 3.1 lately ?
Click to expand...
Click to collapse
hilarious
Maybe sounds funny but I went back to 1.38.x.x and to tell you the truth here where I live with T-mobile USA this radio is the one that is working the best for me,the GPS is very fast and the battery last longer.
So I guess is also a matter of location,provider,own use etc...
That windows 3.1 was great
I got bepe0.79
Thank you for your reply about missing GPS of my udk6.0 which the radio is end 00.I'v got bepe_0.79_wwe_notom.Do you know its radio version?
I found out the 1.5 radio is only 13.5M but other old radio normal more than 60M,why?
jerrywei said:
Thank you for your reply about missing GPS of my udk6.0 which the radio is end 00.I'v got bepe_0.79_wwe_notom.Do you know its radio version?
I found out the 1.5 radio is only 13.5M but other old radio normal more than 60M,why?
Click to expand...
Click to collapse
i think the 60M one is a OS+radio upgrade .... correct me if i am wrong
ctrlaltdel said:
i think the 60M one is a OS+radio upgrade .... correct me if i am wrong
Click to expand...
Click to collapse
ROMUpdateUtility.exe is 1.37M,the RUU_signed.nbh is about 60M.I don't know whether your right.
jerrywei said:
ROMUpdateUtility.exe is 1.37M,the RUU_signed.nbh is about 60M.I don't know whether your right.
Click to expand...
Click to collapse
try to use nbhtool to convert .nbh to .nb, then you will see few .nb files.
the one os.nb is the OS
or if you flash this, you will lost all your data, then must contain OS part since radio upgrade will not affect OS
you are right,the 13.5M is only the radio.thanks
Hi,
I cooked my first rom of Softbank X04HT with annoying USIM nag screen removed.
*** This ROM includes OS only ***
For unlocking issue, please see here:
http://forum.xda-developers.com/showthread.php?t=414835
Other Mods:
- Sample Pictures, Wallpapers, Videos and Musics (.wmv) have been removed from the rom.
I didnt do many mods on this rom.... because I don't know how to...
Other Mods that I want to do if someone can help me:
- Remove all the default weather location (not from the full list, but the selected cities)
Finally, for people who want the mods, please PM me and keep the link for your own use. And don't forget, this is my first cooked ROM (by newbie) and use it as your own risk.
Thank you.
so it has all the jap imes?
how do we try this out?
can other coutry' diamond use this rom?
I think so... you can send me msg to have a try
send me PM and I will send you the link if you want to try.
This rom can be uesd on my diamond.my diamond is Traditional Chinese verson.
it can run,but can not make a call .
hailin.yu said:
it can run,but can not make a call .
Click to expand...
Click to collapse
I have tried this ROM too, thanks to Sky Man:
1) yes it can run on any CID unlocked Diamond
2) yes it can make calls. I had exactly the same problem at first. You have to go to the phone/band settings: by default, it's set on 3G only. U've got to change this according with the service available where you live (automatic, GSM, try and see which setting works better for you)
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
riri22 said:
I have tried this ROM too, thanks to Sky Man:
1) yes it can run on any CID unlocked Diamond
2) yes it can make calls. I had exactly the same problem at first. You have to go to the phone/band settings: by default, it's set on 3G only. U've got to change this according with the service available where you live (automatic, GSM, try and see which setting works better for you)
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
Click to expand...
Click to collapse
thanx,now i can use the phone.
riri22 said:
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
Click to expand...
Click to collapse
Thanks for your message.
There could be a chance that your radio doesnt work with my ROM (actually, the rom from Softbank). Since I didnt do any tuning or mods on the settings, and I have no problem of using the ROM, therefore, I guess the problem could be radio (Im just gussing)
Other people who used this rom pls comment on it ~
Thanks!
Sky Man said:
Thanks for your message.
There could be a chance that your radio doesnt work with my ROM (actually, the rom from Softbank). Since I didnt do any tuning or mods on the settings, and I have no problem of using the ROM, therefore, I guess the problem could be radio (Im just gussing)
Other people who used this rom pls comment on it ~
Thanks!
Click to expand...
Click to collapse
thanks you for your rom. may i know your using radio is what? i didn't meet the sleep problem,but it often doesn't answer. i dont know why, maybe the Chinese ime i installed?
hailin.yu said:
thanks you for your rom. may i know your using radio is what? i didn't meet the sleep problem,but it often doesn't answer. i dont know why, maybe the Chinese ime i installed?
Click to expand...
Click to collapse
Im using SPL-1.40.OliNex
Sky Man said:
Thanks for your message.
There could be a chance that your radio doesnt work with my ROM (actually, the rom from Softbank). Since I didnt do any tuning or mods on the settings, and I have no problem of using the ROM, therefore, I guess the problem could be radio (Im just gussing)
Other people who used this rom pls comment on it ~
Thanks!
Click to expand...
Click to collapse
My Radio: 1.09.25.23
My SPL: 1.93 Olinex
SKy Man san,
great!
Thank you very much. your ROM is very good. have not discovery any problem.
BR
ylyu
Dial up connection
Hi, this ROM works well except softbank dial-up connection. It seems that this ROM doesn't have any connection setting. Do you know how I can restore softbank connection setting? (I'm using softbank USIM)
htakahasyd5 said:
Hi, this ROM works well except softbank dial-up connection. It seems that this ROM doesn't have any connection setting. Do you know how I can restore softbank connection setting? (I'm using softbank USIM)
Click to expand...
Click to collapse
After you flash the rom, the softbank setting should be already there and you cant do any modification on it... Im using the same rom with softbank sim card.
i cannot use the Dictionary and the word game.
is the rom missing sth?
calkelvzeee said:
i cannot use the Dictionary and the word game.
is the rom missing sth?
Click to expand...
Click to collapse
the additional data is in the cd-rom which comes with the phone when you buy it. it's not in the rom, and you have to install the data from the cd-rom.
Why does Japanese roms only say 3G and not H? The Japanese ROM i tried only had 3G, but all the wwe roms I tried show H.
riri22 said:
I have tried this ROM too, thanks to Sky Man:
1) yes it can run on any CID unlocked Diamond
2) yes it can make calls. I had exactly the same problem at first. You have to go to the phone/band settings: by default, it's set on 3G only. U've got to change this according with the service available where you live (automatic, GSM, try and see which setting works better for you)
3) the ROM was running fine and fast but I came a across a major bug, therefore I had to uninstall it: after the phone entered sleep mode there was no way to wake it up. Pressing the 'on' button would have no effect and I had to soft reset every time.
Thanks Sky Man for your hardwork anyway. Hope this can be fixed.
(I reinstalled telsta ROM and the bug has disapeared.
Click to expand...
Click to collapse
i'm trying the x05ht rom in the US on my HTC FUZE(Raphael) but i seem to have the USIM nag on mine too. i was wondering how you removed it from the x04ht rom? maybe you can remove it the same way on the x05ht rom too? i greatly appreciate it!! thanks!!
I have a US version of the diamond but the signal isn't really good. I have radio ver. 1.00.25.08 and rom ver:1.93.442.4WWE. Should I change the radio ver?? if so, which one should I get?
I think it's better first go into Phone / menu / options /band and there deselect "auto" option and select your type of network ( like GSM ). For me it worked. All the best
radio
only way to find whats best for you is to flash and try other radios.
good luck
here in greece i have the same problem! signal on my diamond 2 is weak......
hope a new radio rom comes out,....
kostas ntinos said:
here in greece i have the same problem! signal on my diamond 2 is weak......
hope a new radio rom comes out,....
Click to expand...
Click to collapse
Which Rom and Radio version do you use?
liamhere said:
only way to find whats best for you is to flash and try other radios.
good luck
Click to expand...
Click to collapse
Totally agree, it's the only way to go.
albumihai2004 said:
I think it's better first go into Phone / menu / options /band and there deselect "auto" option and select your type of network ( like GSM ). For me it worked. All the best
Click to expand...
Click to collapse
awesome just changed to GSM instead of auto and wallah ive gone from 1 bar to full strength signal
I have tried flashing rom and changing radio and that didnt work but this sorted it straight away
Many thanks Ash
thats interesting... changing to GSM is not making a difference in India....
i guess the service providers r f###ed up!!
Hey there people,
I'm having a seriously strange problem with my Diamond. I did search the forum and didn't find anything remotely similar.
Here it is...I'm on a Virgin Mobile South Africa contract, and from about 3 days ago I can't send any text messages, it moves to the outbox, and just stays there until I get an error message saying "message cannot be sent".
I have checked my service centre number, and i is correct.
Now the strange part, when I put my Vodacom sim card in my Diamond It Functions fine, and when I put my 'faulty' Virgin Mobile simcard in my old Sony Ericsson there is no problems of anykind!!
I have flashed several Roms, including Stock Roms, and have tried MTTY, still no luck...
Anyone?? Anything?? Please, this is very frustrating!!
Thanks in advance!!
try flashing new radio(maybe stock to try if there is a change)
mauk said:
try flashing new radio(maybe stock to try if there is a change)
Click to expand...
Click to collapse
Tried reverting COMPLETELY back to stock and it didn't work
new radio
get the 1.17.25.09 official radio upgrade that fixes the issue with sms center.
search for it.
note - there's 2 1.17.25.09 radios available, one is from the blackstone and the other one is officially released for the diamond... get the one officially for the diamond.
bevoc said:
get the 1.17.25.09 official radio upgrade that fixes the issue with sms center.
search for it.
note - there's 2 1.17.25.09 radios available, one is from the blackstone and the other one is officially released for the diamond... get the one officially for the diamond.
Click to expand...
Click to collapse
Thank You, but there is no problem with my message centre number, I am able to change it, and have tried ALL the numbers given to my by my provider.
This is probably the one most frustrating problem I've had with my Diamond
Try wirh that radio, you have nothing to loose.
benko286 said:
Try wirh that radio, you have nothing to loose.
Click to expand...
Click to collapse
Just tried the radio...not working
I don't get why it's just with this ONE sim that it's not working...
try 1.17 radio with rilphone...
mauk said:
try 1.17 radio with rilphone...
Click to expand...
Click to collapse
What is rilphone? how do i add it?
Thank you for helping!
Rilphone
Check this:
rilphone.dll thread :http://forum.xda-developers.com/showthread.php?t=494632
info about rilphone: http://forum.xda-developers.com/showpost.php?p=3354857
SOLVED!!
Thank you all for the help and advice!!
All i did was go to my network band settings, and changed the band from AUTO to GSM and now everything seems fine. My provider does not offer 3g/hsdpa, so i'm not losing out!!