Related
When I turn on Bluetooth on XDA IIs, I got this error message :
"The bluetooth radio radio failed to turn on due to insufficient driver memory available. You must perform a normal reset before you can turn on the bluetooth radio."
Anyone can advise how to resolve this ? Soft reset does not cure the problem. Thanks.
have you upgraded to bluetooth stack version 3900 ???
if you have then im fresh outta ideas, if you havent find this at our FTP site,
ftp://xda-developers.com/
login and password = xda
got the same problem when i installed one of the bluetooth upgrades on its own. then i installed the new rom and everything was fine. not sure where the connection is but thought id share my problem
Problem solved.
By the way, what is the latest version of ROM for XDA2s, and where to get it from ?
Thanks.
So I was wrong.
After upgrading the BT upgrade, things was OK yesterday. But this morning i got the same error again.
Went to ftp://xda-developers.com/ as suggested, can anyone mentioned the filename of the ROM mentioned by thakkergaurav above ?
Thanks.
The latest ROM is 1.40
You can find it here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Hmmm..... :?
This BT issue is really getting to be NOT FUNNY! :evil:
Running the new ROM 1.40 and BT 3900 I'm now getting the "no sound" problem on the handset and caller cannot hear me on a HS801!
I use the turn on/turn off BT trick or soft re-set and the handset is OK for a couple of hours but the HS801 still does not work even though its OK with my old PocketPC,a nokia and a Motorola V3!
Is there any consistancy with this problem? It seems the different ROMs, Radio Stacks and BT versions are being effected.
Well, emailed the tech support, and all they can say was ...
"There is a ROM upgrade in development which is in the final stages.
We request your patience as we are trying to release the upgrade as soon as possible."
And that was 2 weeks ago.
even my bluetooth is upgraded to 3900,
i get the same error message also..
i cannot believe a 96mb memory is still not enough
i never get this kinda nonsense when i was using the 5450 ipaq
my today plugins was all over the screen and I had never encountered low memory...
I had the same problem but I have a Harrier not a BA so I thought it was related to that and you BA guys wouldn't get it.
Anyway, the solution on the harrier was to
-turn flight mode on
-soft reset
-turn bluetooth on
-turn flight mode off
Hope this helps
Here is a possible solution from wiki:
The ExSenetoR wrote:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Have not tried this myself, but I believe others have had success with it. You may want to save the file somewhere else, in case you want to reinstate it later...
Hope this helps
Chris
I posted this in another thread.
It really does look like a combo of the 1.40 ROM and 1.12 Radio Stack that is causing this problem (in this case, anyway. See sig). After trolling various forums, it seems that both BT build 3900 and 3500 are having the same issues.
IMHO it seems that the Blue Angel is trying to send the call to my HS801 even when BT is not activated.
Has anyone had a good look at the current radio stack? I've tried contacting Broadcom (BT chipset supplier) but it has been 3 weeks with no answer.
I've done the Run_BTTrayCE_10.lnk workaround but this is only a bandaid and I don't really have enough experience to attempt to cook the ROM. Any ideas?
I have a Motorola HS801 as well and I can receive calls just fine but when I make calls the other party can't hear me. I'm giving up on the HS801 - it's a cheapie anyway and I don't know of anyone else who's got it working either. Running BT3900
Hey everyone,
i've noticed, that this has been discussed before, but i've found only a thread in the kaiser forums and there seems to be no solution for this:
I'm using a plantronics discovery 665 headset with the Artemis on meschle's touch rom 3.01 and the sound quality (especially for the those I've called) is really bad. They always say, that they hardly hear me. In the kaiser forums they say it's possibly a hardware issue, or that it has something to do with bt 2.0. I was using a plantronics explorer 350 headset before with the original wm5 ROM and it worked just fine. I tried the new headset yesterday with a 'normal' nokia cell phone and the quality was excellent. So it's neither a problem with the headset, nor a problem with the Artemis itself (I think).
I played a bit with schap's advanced configuration tool to change the sample rate, using joint stereo or not, changing bit pool size, but nothing seems to make a difference. I don't want to downgrade to an older ROM (or the original one) because I think meschle's ROM is just great! And I don't even know, if it would help ('cause now I have only the WM6 version of the original ROM, and maybe it's a WM6 problem?!).
If someone has any experience with this issue, knows if an other ROM will do the trick, or have a solution for this problem, that would be great!
WM5, the better software?
ok guys,
as nobody seemed to have an answer or a similar problem, i've tested all ROMs i could find, and the last one, the oldest one, the original WM5 ROM worked for me/my headset. the quality now is as good as it should be! it's frustrating to use this again after using meschles ROM extensivly, but it's still a phone and every now and then i want to use it's phone-function as well!
maybe someone has an explanation for this?! is it really a WM6 issue? (the original ROM WM6 didn't work either)
WM6?
kb1313 said:
ok guys,
as nobody seemed to have an answer or a similar problem, i've tested all ROMs i could find, and the last one, the oldest one, the original WM5 ROM worked for me/my headset. the quality now is as good as it should be! it's frustrating to use this again after using meschles ROM extensivly, but it's still a phone and every now and then i want to use it's phone-function as well!
maybe someone has an explanation for this?! is it really a WM6 issue? (the original ROM WM6 didn't work either)
Click to expand...
Click to collapse
I'm also thinking it's a WM6 issues. No problems b4 I upgrade to Meschele's Touch 2.1. Btw Touch 2.1 works great!!!
Now before anyone goes bashing me for not searching the forum, lemme tell everyone, I've done just that. I just haven't found the answer to my problem.
I recently acquired an 8525 (which I'm loving BTW ). I have a Jawbone headset that pairs up fine with all of my phones (BB Pearl, 8125, & 8525). Only problem is, I can actually *use* the Jawbone with my Pearl and my Wizard, just not my Hermes.
I've paired, deleted, and re-paired again but to no avail. I've tried to get an actual conversation going using 3 different ROMs: AT&T's official WM6, Schaps 4.30 Full, and vp3G's 3.62 Full, but nothing works. I've reset the Jawbone more times than I can count, and I still can't use it.
ANY input on this would be GREATLY appreciated, since I actually *need* to use it for work...
BombaMyte said:
Now before anyone goes bashing me for not searching the forum, lemme tell everyone, I've done just that. I just haven't found the answer to my problem.
I recently acquired an 8525 (which I'm loving BTW ). I have a Jawbone headset that pairs up fine with all of my phones (BB Pearl, 8125, & 8525). Only problem is, I can actually *use* the Jawbone with my Pearl and my Wizard, just not my Hermes.
I've paired, deleted, and re-paired again but to no avail. I've tried to get an actual conversation going using 3 different ROMs: AT&T's official WM6, Schaps 4.30 Full, and vp3G's 3.62 Full, but nothing works. I've reset the Jawbone more times than I can count, and I still can't use it.
ANY input on this would be GREATLY appreciated, since I actually *need* to use it for work...
Click to expand...
Click to collapse
I am currently using my Jawbone with Schnaps 4.01 Lite rom and no problem. Before that I have been using all of Matt's Pandora Kitchen roms, right up to the latest and never had a problem. I ran Schnaps 4.30 Full rom too, but really can't remember if I used the Jawbone during the testing time. If someone else can't help I can flash that rom again and test the Jawbone with it too. Let me know ho wit goes.
works with vp3g3.62. no issues, didnt require anything special. Does bt radio on your 8525 work?
I have an 8525 running Schaps 4.30 with radio 1.48.00 and mine is working. I did however have to return one Jawbone because it would connect and I could hear the conversation but the mic didn't pick up my voice. I tried that one on my wife's razor and it had the same symptoms though. What radio are you running?
Using with TNT's latest ROM and no problems, however not real impressed with Jawbone so far. Most people I call say it sounds "tinny".
mthomas said:
works with vp3g3.62. no issues, didnt require anything special. Does bt radio on your 8525 work?
Click to expand...
Click to collapse
AFAIK, the BT radio works. Like I said, I can pair up with it just fine, and even see the other BT-enabled phones/devices at my job. I just can't get any type of audio from my JB. I'm currently using vp3G as well.
UPDATE: Well to be on the safe side, I tested my Jawbone on a couple other phones; sure enough it's working fine, so it's got to be something up with my poor Hermes... Any advice?
Mine Jawbone Works fine also. I remember when I first got it I was having trouble with my sound. I remember changing the audio bitrate from 48 bit to 44 bit in the advanced config utility 1.1 Also try changing the stereo setting to mono.
May help you out, hope so.
Just a quick update: I reflashed vp3G's 3.62 ROM, reset my JB and repaired it; same effect, nothing. Just to be on the safe side I paired the JB with my Wizard, BB Pearl, and a couple of phones at my store and it works as it should.
@ mthomas: I'm using 1.48.00 for my radio. Since you and I seem to have the same type of setup, did you install any other cabs that help your BT out?
Do you have another Bluetooth headset to test. Even thought it can pair ok, it only means the "data" channel is working. The problem could easily be the voice channel which is not working. If possible, may be borrow another headset to try.
That's my next idea. I think I have an old Plantronics I can charge up and test out...
*BUMP!*
Gotta keep this fresh. Funny thing I noticed though: when I have the Jawbone connected and the phone rings, I still hear it's little tone in my ear, but no audio comes or goes through. No registry edits have been made; I've even done a hard reset, re-paired and tried again, to no avail.
C'mon you guys! Why am I the only 8525/Jawbone user around here that *can't* use his Jawbone??? Help me out here...
wish i had the answer. im using the most current att radio 1.54.07.00. how did your device work w/ another headset?no additional tweaks
Okay, now I'm getting pissed.
I tried using my old Plantronics 320. It pairs fine with the Hermes, but making phone calls is a no-go.
The only thing I removed (from anyone using vp3G's 3.62 Full) was Sleuth's PTT Fix; I need PTT more than being able to re-map the button. So I doubt this is the culprit.
WTH can't I use my good Jawbone with this thing?!?!
Quick *bump*
Same Problem
I have tried everything, I can hear the calls just fine but no sound from my mic. I have paired with other phones & it works fine. Please let me know if you find a fix!!
UPDATE: I tried using a Moto H700 and a Plantronics 340-no dice. Now I'm starting to think if it's a BT stack issue...
Now I'm completely stumped. I just flashed back to the original ATT WM5 rom, paired up, SR, then made a phone call to my 8525 from my house line. Jawbone rang in my ear, sure. I answer the call, no sound.
Could there be a problem with my BT radio? And if there is, how can I be sure/troubleshoot it?
Just throwing someting into the pot. have you tried unpairing it with your other phones? I know i was trying to pair my to my wifes and it would work because it was paired to my phone. Try deleting the relationship between the other phones. Other than that if its new enough just take it back and get another
myv6mustang said:
Just throwing someting into the pot. have you tried unpairing it with your other phones? I know i was trying to pair my to my wifes and it would work because it was paired to my phone. Try deleting the relationship between the other phones. Other than that if its new enough just take it back and get another
Click to expand...
Click to collapse
Good thought... But I already did that, still no joy. In fact, I just flashed over to HTC's official TyTN rom, and still nothing. I'm going to call a friend of mine and see if I can get it to work on their 8525. Here's a good ? tho: Should it matter if it's Cingular or AT&T branded? Are there any differences in hardware between the two types? Or could it be a faulty BT radio? I'm racking my brain trying to figure this out.
Worse comes to worse, I'm sure I could exchange my Jawbone; I *do* work for AT&T so it should be okay...
Okay, here's another question: If I were to flash *ALL* the way down to the original Cingular shipped ROM, RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship, would this have any effect on the BT stack? I'm only asking because I can't seem to find any type of information about replacing the built-in stack (outside of the Widcomm project and that's too beta for me ATM), and I still can't understand why so many headsets that I've tried with this damned 8525 don't seem to work, but so many people here @ XDA can use theirs. There's no differences between the Cingular branded and AT&T branded models (at least hardware/software-wise), and if I pair up my trusty Jawbone with another 8525 (AT&T branded, btw), it works fine.
I know I've been going back and forth with this, but I did pay a good amount for my 8525 and I don't want it to be partially or mostly functional. Hell, if my poor Wizard can handle my Jawbone, why can't my Hermes?
BTW, thanks for all of the suggestions you guys have given me to help me with this problem. Even though none of them have worked, I still need to give props where they're due.
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
TT 7 Does work with Rhodium, as does VC, everything has it's quirks of config. BT has always been a pain in the ass and requires different settings for different HFPs, Car Kits and A2DPs.
If you wan to kill Touch Flow, go into start/settings/personal/today and untick the TF.
There are plenty of threads and posts that will resolve most of your issues mate.
Search the entire forum, not just the Rhodium section and you'll get the answers you need.
Cheers,
Beasty
From your list of programs I can only confirm that Tomtom 7 DOES work, and it works very well. I'm using 7.915.9196 VGA
I haven't installed much software yet as Ive been a bit busy, but everything I've put on has worked pefectly. Admittedly I only installed stuff that worked on my Diamond which was also wm6.1
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
first of all sorry to hear you're having so much issues with the software you need to run on the phone. i have a kaiser/tytn 2 and software from that i have working on tp2. tomtom6 from tytn 2 does not work but tomtom7 defo does. MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2. please remember that tp2 is WVGA res so that alone may effect the compatibility of some programs. the Blackstone forum is littered with programs that you may need that will work on tp2 and even better! can't really comment on your work software as dont know what it is! good luck with searching!
oh and i know it may be silly but make sure your phone is visible for BT purposes an use phone to pair with your landrover. mine works well with my parrot system with no issues!
shingers5 said:
first of all sorry to hear you're having so much issues with the software you need to run on the phone. i have a kaiser/tytn 2 and software from that i have working on tp2. tomtom6 from tytn 2 does not work but tomtom7 defo does. MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2. please remember that tp2 is WVGA res so that alone may effect the compatibility of some programs. the Blackstone forum is littered with programs that you may need that will work on tp2 and even better! can't really comment on your work software as dont know what it is! good luck with searching!
oh and i know it may be silly but make sure your phone is visible for BT purposes an use phone to pair with your landrover. mine works well with my parrot system with no issues!
Click to expand...
Click to collapse
What he said!
agreed that WVGA is your biggest problem. install "second today" to solve your problem with things not on the screen because of touch flo.
Hi Beasty
Thanks for tips, now i know what its codename is, it made it easier to find stuff on this excellent site after i saw your and other replies and have since loaded MS VC 1.6 UK Edition which seems to work ok although not tried it yet with my new HTC BT Headset.
In reply to the others thanks for the great info so far, i have tried loading TomTom 7 once again from the MicroSD card and it wont even load, its just says "this version of TomTom 7 is not compatible with this device" when i click "OK" it just terminates. I dont know what version it is till it loads?
A friend of mine this evening says that the closest phone on the TT7 compatability list seems to be the HTC Touch HD, and that CoPilot 7 actually lists Touch Pro2 as a compatible device, so i will have to try that i think and see if it actually does work, and will let you and the forum know
In terms of the work applications, i know they are based on the MS .NET Micro framework and so should work out of the box, but no they dont, but i think it is a screen resolution issue more than anything else.
The other app i need to run ideally is "Nimbuzz" Multi IM app, again for work.
On both of these work related apps i get an intermittent error message, saying "An error has occurred with xxxx appplication, send error report yes or no" when i choose Yes, it loops same message, when i clicked No it loops once then closes.
I removed the "Nimbuzz" application and soft reset, but still get the error message for it which is weird. So if anyone knows of a Multi IM (Inc Skype) which will run on Touch Pro 2 i look forward to knowing about it.
Work funded 50% of my Touch Pro2 purchase so need to get this all working as best i can
Thanks again for the tips, hints, instructions
Alex
shingers5 said:
[...]
MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2.
[...]
Click to expand...
Click to collapse
Do you know if anyone has been able to get MSVC to work with the TP2 with a bluetooth headset?
I have tried both the US and European versions of MSVC 1.6 with my TP2. It only seems to work with the built-in speaker.
mschaffer said:
Do you know if anyone has been able to get MSVC to work with the TP2 with a bluetooth headset?
I have tried both the US and European versions of MSVC 1.6 with my TP2. It only seems to work with the built-in speaker.
Click to expand...
Click to collapse
haven't tried as dont use bluetooth headsets. can't stand having that bulk in my ear. from what i have read it doesn't work but i can't be certain as not used myelf
Also make sure you install .net compact framework 3.5:
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
Hi
Added "Second Today" thanks for that, what a cool app, except got all those nasty recurring error messages that i had big trouble getting rid of.
Have now returned to bog standard WM6.1 having got rid of TouchFlo 3D thanks to Beasty
I like to use what i am used to till i have all the progs i need to be work productive on the move, will then fiddle with TouchFlo 3D laterz
Alex
tomtom 7.450 works well on my tp2
alexsimmons said:
Hi
Added "Second Today" thanks for that, what a cool app, except got all those nasty recurring error messages that i had big trouble getting rid of.
Have now returned to bog standard WM6.1 having got rid of TouchFlo 3D thanks to Beasty
I like to use what i am used to till i have all the progs i need to be work productive on the move, will then fiddle with TouchFlo 3D laterz
Alex
Click to expand...
Click to collapse
No problem sir,
We are all here to help each other, TF3D is a highly usefull interface, just takes a bit of getting used to, 2nd today and TF3D is a great combination especially when you configure one of the softkeys to switch between both.
Multi IM you could try BeeJive, not a lot of experience with this (seem to remember Elite team including it in their Roms) but there are plenty available on the net.
Cheers,
Beasty
Hi All
Got MSVC working on TP2 but not with a BT headset so have just bought the Parrot Minikit Slim with voice dialling, although the voice dialling only works if you can sync the TP 2 with it just like my landrover, but it does not tell you this on the outside of the box.
Guess what? The TP2 is not listed on the Parrot Minikit compatibility list so may have spent/wasted another £70 today as cant sync the TP2 contacts with the Parrot system which is the same prob i was having with my landrover
Alex
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
Hey Alex...
I am sorry to hear that you are having so many problems and I have a fix-all solution for you.... I have a posting up in the marketplace, where I am looking to Trade a HTC Titan (Sprint Mogul) and 2 HTC Kaisers (AT&T Tilt's) for 1 GSM Touch Pro 2.... & I can confirm that TomTom 7 works on all 3 (I have the GPS unlocked on the Mogul).... Just think... 3 phones for your 1... What a great deal
Can someone post the link to the UK version of MSVC? I can't see it at the MS site.
I installed MSVC on my TP2 which led to a hard reset, so I want to be sure that I'm using the right version.
Thanks
"...i have tried loading TomTom 7 once again from the MicroSD card and it wont even load, its just says "this version of TomTom 7 is not compatible with this device" when i click "OK" it just terminates. I dont know what version it is till it loads?"
I've exactly this same problem. Does anybody know how to get around this and get it installed?
Wouldn't you know it. 24 hours of bashing my head against the desk trying to get this to work....I add a message to this board and 10 minutes later it works. Just used 7.915.9196 VGA as pointed out by stunno and remembered to look in program files after it was installed instead of repeatedly clicking on the original installer on the memory card.
alexsimmons said:
Guess what? The TP2 is not listed on the Parrot Minikit compatibility list so may have spent/wasted another £70 today as cant sync the TP2 contacts with the Parrot system which is the same prob i was having with my landrover
Click to expand...
Click to collapse
So strange.
I'm using the parrot CK3100, and that's working fine, out of the box.
Just let the TP2 find the Parrot, 1234 as pin, and the TP2 recognizes it as a Hands-free set.
And it automatically started synchronizing.
My parrot 3200LS will not sync the directory either. It just disconnects the bluetooth device as soon as you tell it to sync. It works as a handfree ok, but its a pain to make calls without the directory.
Ok here's my problem:
I make custom dutch roms for the Rhodium (touch pro 2).
I use the latest XIP/SYS builds (28009 at this moment) and I use manila/sense 2.5
(Almost) everything works great!
I also own a pioneer car-entertainment set (avic f900bt) which has a built in parrot bluetooth carkit.
Pairing goes perfect and I can transfer my phonebook and make calls.
The problem is that when I recieve a call and try to hang up the system hangs and needs a reset. My TP2 also hangs for a while after such an event and then after minutes goes back to the today screen.
At first I thought it was my carkit, but my wife's samsung and my brother in law's blackberry work fine.
Then I tried my own phone with the latest OFFICIAL 6.5 rom (dutch) and it worked great.
So I started to trial and error with different adjusted roms. I got it all working with the newest XIP/SYS builds. But the problem seems to lie somewhere in manila 2.5. I even got it working in manila 2.1 without any bugs
But with 2.5 I get the problems above. And I forgot to mention another bug:
- When I make a call or recieve a call I do not see a 'red phone' button to hang up which I do see with other phone's or roms without manila 2.5. So I have to end a call on my HTC instead of my carkit. And when I try after recieving a call it hangs as described above.
After 2 weeks of flashing and trying I give up...
I use the OEM from the latest official dutch 6.5 rom so those drivers can not be the issue. As stated before...It's all pointing to manila 2.5. But after flashing disabling manila does not fix the problem. So it must be somewhere in the cooking proces (Ervius VK 1.82)
Please one of you supreme chefs help me out here because it's frustrating me now and I want to get it working as it should.
Thanks a milion in advance!!
EDIT: to the mods; I did not know where exactly to post this after the re-organisation. So please move if neccesary.
Almost 170 views and no comments??
Please fellow cooks...I'm desperate...
Well i do think you already have an answer.
But the actual non existing pressure you feel from users that always want the latest no matter how buggy it might be
When MS started to "Leak" builds beyond 20000 (But before 21054).
I also started noticing Bluetooth pairings going haywire and acting differently.
As i don't care that much about what most "Flashers" think and tend to believe that the choices i make concerning cooking a rom are probably more founded in what is right.
I tend to stick to stable OS Builds. It's the New Age XDA dilemma, either dish out unpredictable New Builds, or make a ROM that in the first place Suits you and has the functionality You need.
In this case that would be an older SYS.
I think that also because of TP2 has now switched to different Bluetooth Stack and 2.1+EDR isn't helping.
And it might be that MS is actually working on getting up to speed and changing their own BT Stack, so HTC will not need to turn to WidComm for the BT Stack.
I do believe that there are a few Senior Cheffs and some Non Cheffs do probably know which other parts (besides the Obviously named Bluetooth related SYStem parts), might be related to dealing with Bluetooth Pairing and such.
Whatever solution there might or might not be, don't hesitate to make it hybrid.
Use the old fashioned method of dividing and conquering.
(Get a good supply off Coffee)
Start with Stable Release Build SYS replace 50% test. (leaving all obviously Bluetooth related Packages from Stable Build)
Replace the Next 25% Test etc, you know the drill.
And hopefully isolate the Packages from SYS that have related Files to Bluetooth.
Luckily there's already enough SYS packages you can rule out like enterprise, entertainment, Office and such.
I know it's not a cut and dried answer, but hopefully i can "Je een hart onder de riem steken" that your up against this alone ATM.
But consider this, how many time do you have at hand, and is it worth it putting a lot of time into it, only finding out MS fixes it in a few "Leaked" Beta Builds.
Who knows maybe this Bump does get a few others on to this thread that has already tackled this problem.
(Da_G is the most likely, that i know that might know other Bluetooth dependencies inside the SYS)
Cheerz,
PS: don't forget to enjoy the snow a bit.
Pairing with Avic f900BT
I too have the exact same problems. The phone is straight out of the box.
Any easy ansewrs as yer?
Magic3091 said:
I too have the exact same problems. The phone is straight out of the box.
Any easy ansewrs as yer?
Click to expand...
Click to collapse
I got it working on mine using the attached cab