Develop Bugs

VOIP of Hermes LVSW Edition (2007-03-26)?

May I know will VOIP worked with Hermes LVSW Edition (2007-03-26)?
I installed the VOIP.cab, and check with windows folder, there is No such files.
ipdialplan.xml
dnsapi.dll
voipphonecanvas.dll
rtcdll.dll
May I know How to make it work?

I'm not using LVSW edition but VOIP is working with my WM6. Try download this,
ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB

May I know which version of WM6.0 you used?

Slightly modified Black v1.2.
I already make a few call just now. Works but there is echo.

May I know do u have these files?
ipdialplan.xml
dnsapi.dll
voipphonecanvas.dll
rtcdll.dll

Initially do not have. But after installing tha CAB I show you earlier, the files now in the windows directory.

Working VOIP on LVSW
I work with the LVSW 25-3-2007. VOIP works fine, but besides the VOIPWM6.cab, you also need to generate a voip.cab with your settings, like username and password.
Search the thread where everything has been bescribed. Follow the instructions and VOIP works... for me without echo (voipbuster).

I have create the VoIP.Cab and installed it, but the Internet Call alway available or no service, but I can't use it!

You have to tap the today item for internet call. until it become selected.
What provider that you use? I use voipstunt & voipbuster.

I using HKBN and I have tap the Internet Call, but there is No response!

In internet calling tab, what do you select? For me I select Use internet calling "whenever available"

Yes, I have select the Whenever available.

I 've a similar problem too.
I've installed the LVSW Edition, + the voip Cab.
I've configured a .cab to enter my ISP configuration.
When I launch Wifi, in 10-15 sec, I have : Internet Calling Available on the today screen.
BUT !
When I click on the internet tab on the today screen, I just see the configuration never, whenever available, only if cellular is not available.
And that's all !
How can I phone ?
When I use the green button of the hermes, I have "no sim card".
( I've removed it)
And I don't see how to pass a call.
Help is welcome.
Thanks to all !

Why you not try voipbuster or voipstunt.

How can I make the internet call from available to selected?
I have check the phone , which contain Prov0SIPSettings under the directory \Windows\System\VoIP

You may need some registry editing,
HKLM\System\VoIP\SIP\EnablePort5060
change to value from 0 to 1
If you connect to internet using 3G then
HKLM\Comm\RTC\AdapterTypes
delete value for both 1 & 2.
After that softreset your Hermes.
When internet call become selected, all your call will be using VoIP.

I did the registry changes, but, no way !
It always tell me that I can't launch the call !
Don't understand...
If someone could help !

I change these registry and reset, it still show available.

Does your configuration in voip is correct? ie username, password, server, port, etc..
If you are using voipstunt, I can show you my configuration.

The configuation may be correct,but some setting I need to confirm, Anyone know the sip.registrar.com of the HKBN 2b service? or the configuration of HKBN?

[SOLVED] VoIP: How I use it?

THIS IS THE SOLUTION FOR ME WITH YOUR ANSWERS
1) Create any VoIP Account with a provider (for example I use VoIPStunt)
2) Configure the wm6 voip with your settings account:
http://forum.xda-developers.com/showthread.php?t=299950
or more easy,
http://forum.xda-developers.com/showthread.php?t=303493
3) Talk using VoIP:
http://forum.xda-developers.com/showpost.php?p=1233797&postcount=14
4) Call to SIP address:
http://forum.xda-developers.com/showpost.php?p=1235084&postcount=21
and
http://forum.xda-developers.com/showpost.php?p=1234112&postcount=19
Thanks a lot for your help.
Toni
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse

I have been reading a little about this but have not done anything about it because been to busy flashing...lol...but anyhow if you already did everything i think i read that in order for it to work you need to be connected to WIFI, not your isp...if im wrong please correct me someone!! and if anyone got it to work with AT&T please post carrier settings please!

ToniSC said:
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
If you searched in the forum you would have found this thread
http://forum.xda-developers.com/showthread.php?t=299950

Hi Shaun33
I found this post and I read all the commants. I make all steps that post indicated, but my problem is that I doesn't know how to use the wm6 voip.
In the same port, anybody has the same problem, but there hasn't answer.
Thanks.
Toni

if you can't see an answer in the thread (http://forum.xda-developers.com/showthread.php?t=299950) then there probably isn't an answer!

ToniSC said:
Hi Shaun33
I found this post and I read all the commants. I make all steps that post indicated, but my problem is that I doesn't know how to use the wm6 voip.
In the same port, anybody has the same problem, but there hasn't answer.
Thanks.
Toni
Click to expand...
Click to collapse
Why not you post what you have done & we identify what is the problem & give the solution.

i think he just wants to know how to actually use it

I am wondering, if he buy the VOIP service or not....
I wanna ask, will other VOIP service provider work on WM6?
like SunRocket or ViaTalk, etc.
TIA

ToniSC said:
Hi all,
sorry if this post is OFFTopic for this forum, but I search and read other post and I not find the solution.
I want use the WM6 VoIP (with lVSW ROM). I install the voip cab and the settings for my provider.
The question is: how can I receive calls? how can I make calls? I not find any dialpad or similar to make it.
Thanks a lot and sorry for the offtopic.
Toni
Click to expand...
Click to collapse
If I understand you correctly, you want to know how to make a call after getting your VOIP settings. Actually, there is no separate dial-pad for a VOIP call - you have to use the existing dial-pad which you would normally use when making a cellular call.
If you have set up your VOIP settings correctly, your plug in on your Today screen should say "your VOIP service:Available or Searching" instead of Internet Calling : Available/Not Available.
In my case, I use Gizmo, so it says Gizmo:Available (when it's not connected) and Gizmo:Searching (when connected via wifi).
When it says Searching, you click on the plug-in, then go to your normal dialing pad where it should also say "Gizmo" on the top right hand corner to indicate that WM6 is using VOIP instead of GSM to make the call.
Hope this helps.
As I am a noobie, I would appreciate it if the senior members could either confirm the above or correct anything which is wrong above.

arul said:
If I understand you correctly, you want to know how to make a call after getting your VOIP settings. Actually, there is not ..........
Click to expand...
Click to collapse
This is the correct "Usage Instructions" for voip.

This is also how I experienced it. Voip only connects through WIFI, although I have made the registry changes as mentioned in another thread. It will be nice if you can select which service to use eg. VOIP or GSM

what if i want not use voIP but my gsm network to call. there is isnt any option to do that once you setup voip. you can disable it but thats not the point. nokia's give you option. am i wrong?

nolovelust said:
what if i want not use voIP but my gsm network to call. there is isnt any option to do that once you setup voip. you can disable it but thats not the point. nokia's give you option. am i wrong?
Click to expand...
Click to collapse
Just tap the today screen item for it toggles between VoIP and GSM

ok... lots of speculation here. Let me tell you what I know:
VoIP, when properly installed, works in the following manner. (If you can't obtain these results then your ROM needs upgrading or your provisioning is incorrect).
Initially, the Internet Calling today screen plugin will show "off" when VoIP is set to "Never" in the Internet tab of phone settings.
When connected to WiFi, you can change this setting to "whenever available". At this point, a properly provisioned VoIP installation will show your VoIP provider from the provisioning XML and "Searching". Shortly after, "Searching" will change to "Selected". At this point all outbound calls placed from your phone will be through your VoIP provider. In fact, the phone skin will show this name too.
However, your phone will ring for incoming calls made to your GSM phone number as well as your VoIP phone number
Now, tapping "Selected" on the Today screen VoIP plugin will change this status to "Available".
At this point, outbound calls get placed through your GSM provider again and the phone skin will show your GSM provider name.
However, inbound calls to both your GSM and VoIP numbers will still ring on your phone.
Turn off VoIP again by going to phone settings and changing the calling network to Never.
Additional notes:
The "Searching" forever behavior previously described is a Bug in some WM6 releases. lvsw 4/23 doesn't have this issue.
You can also set VoIP to work over 3G as well as WiFi by removing the values "1" and "2" in HKLM\Comm\RTC\AdapterTypes. However, there are issues with this that haven't been fully resolved yet. Incoming calls work fine but the called party can't hear you when you place an outgoing VoIP call over 3G.

so there is no way to do this
dial a number select or even press voip button and you dial via voip.
i hate symbian but i might just have to carry to phones because voip enabled nokias can do it.

hmmm maybe you didn't understand. Sorry about that. Short answer is No, there is a way to do this. You can dial any way you want with VoIP active. Just toggle the today setting between "Selected" or "Active" to choose which to use.

Computer to computer calls
I was wondering if there could also be made computer-to-computer-calls. Is there a way to enter 'voip-names' instead of phone-numbers?

at&t CallVantage
How about those of us on Cingular or "The New at&t" is it possible to subscribe to the at&t VoIP service called CallVantage and then get it working on the Hermes?

@tembares:
You *could* try calling directly to the other phone's IP address. the default dialplan supports this. use the following syntax (example assumes you're calling a phone whose address is 192.168.0.1):
192*168*0*1
@brandyholt:
If the AT&T Callvantage service supports a SIP based softphone then the answer is yes.

Thanks a lot Sleuth255 and all people answer to me.
Finally I have been able to make work it!!!!!
@Sleuth255
One question please, if 192.168.0.1 is 192*168*0*1, how I dial for call to an SIP address, for example my gizmo address [email protected]
Toni
Sleuth255 said:
@tembares:
You *could* try calling directly to the other phone's IP address. the default dialplan supports this. use the following syntax (example assumes you're calling a phone whose address is 192.168.0.1):
192*168*0*1
@brandyholt:
If the AT&T Callvantage service supports a SIP based softphone then the answer is yes.
Click to expand...
Click to collapse

VoIP and WM6 Dash

Just wanted to post the results of what I found.
From what I can tell, the VOIP files are missing from the default WM6 Dash Image, a file named WM6VOIP.cab that is floating around the forums will add the files back in. Then following the directions in http://forum.xda-developers.com/showthread.php?t=299950 you can build a cab file with your VOIP provider details inside and install it to the phone. Once installed, find the default windows homescreen as it will have had the Internet Calling plugin put into it, and copy the code for the plugin and place into your home screen of choice. Then you can watch the progress of internet calling. First you need to go into Settings - Phone - Internet Calling and tell the phone when you want it to try to use VOIP, select Where Available to have it connect any time your wifi is on. Turn your wifi on and pair to an AP and watch the magic happen.
There is a bug, at least on mine, where the internet calling app will stay on searching... and never go to selected. However, calling in and out still works so it is not that big a deal. If someone does know how to fix this bug though, please speak up.
The default dial plan sends out a 9 with the numbers you dial through VOIP, so you may need to modify it to be able to send a call successfully. The details are in the thread above.
Call's sound just fine and work quite well. VoIP on a smartphone!

A few more discoveries of my free time.
Along with the issue of not going to selected, the solution I posted above forces audio to go out the speakerphone. When you pair a bluetooth headset however audio goes as it should out the headset so it functions.
Annoyed by this and the searching bug I found another set of DLL's that came as a CAB with a Universal ROM and hand loaded them into the device. Good news is the selected bug is fixed with these new files, bad news is the audio seems misrouted as I can not hear a thing from the other side of the conversation, even when calling internal service lines in asterisk. I will keep trying to find other versions of the DLL's to see if I cant come up with a perfect version, or maybe trying to mix and match to make everything work right

For reference, here are the cabs im playing with so far. WM6VOIP.cab is the set that works, but with bugs. voipfiles.cab was taken from a Universal ROM and while selection works better, audio is misrouted.
Edit: The working files were a cab intended for the VOX, which is why im guessing the audio even half works. The non working cab taken from the full PDA's had audio going the wrong direction simply because the platforms are too dissimiliar. Maybe someone can look back at the WM6 beta roms and see if the VOIP files were ever included by accident, or hopefully the full HTC WM6 rom not from t-mobile will have the files in it.

Interesting, it seems a hybrid of the files has stuff working.
I have loaded the rtcdll.dll from the Vox, with the dnsapi.dll and the voipphonecanvas.dll from the universal and the selection bug is gone, however the audio is still by default routed out the speakerphone and not the internal speaker.
We must strive then to find versions of rtcdll.dll, as it seems to be the controlling factor in where audio goes and how it goes. Or to find some registry entry that controls it.
Edit: a note, dont try to use the VOX rtcdll.dll and dnsapi.dll with the universal voipphonecanvas.dll, instant boot loop. More progress after the factory reset finishes.
Edit2: On second thought, don't mix dll's at all. I have managed to successfully put my device into a boot loop again. This is not a safe place to play.

Well... I've got mine working (sort of) it logs in to my voip server but i can't call or receive incoming calls. Got a message on the screen saying "Internet Calling: Available" but every single call goes through my cell provider.
Hmmm...? Any ideas?

Well... I've got mine working (sort of) it logs in to my voip server but i can't call or receive incoming calls. Got a message on the screen saying "Internet Calling: Available" but every single call goes through my cell provider.
Hmmm...? Any ideas?
Click to expand...
Click to collapse
Got the same problem with 1 provider.
With another it shows "Searching" which won't turn into Selected but at least the icon is showing and it attempts to dial through VOIP.
Make sure you updated your dialplan to your needs. The default one I guess works only for US numbers, fine if you live there, otherwise...
Still searching and triying to develop a little tool to make provisioning easier. Like the one already existing, but for SP instead.
Ka.

kast said:
Got the same problem with 1 provider.
With another it shows "Searching" which won't turn into Selected but at least the icon is showing and it attempts to dial through VOIP.
Make sure you updated your dialplan to your needs. The default one I guess works only for US numbers, fine if you live there, otherwise...
Still searching and triying to develop a little tool to make provisioning easier. Like the one already existing, but for SP instead.
Ka.
Click to expand...
Click to collapse
Hi,
I've tried with my own asterisk, pbxes and sparvoip to no luck.
on every occasion it shows "Available" but can't make any calls
Bart

I'm on pbxes as well. Don't have access to logs... But maybe on your Asterisk you can see better what's going wrong.
Ka.

Hi Kast,
Could you please post your config and dialplan? That would be great.
Thanks,
Bart

Hi,
my config is the same template which was found in here. Only parts which are different are the ones specific to my providers.
For the Dialplan, I got it from one of the posts in the initial VOIP thread in this forum. Credit goes to stevehead http://forum.xda-developers.com/showthread.php?p=1200853&highlight=dialplan+intl#post1200853
Ka.

Well... then I think that there is something wrong with my setup.
on my home screen it displays "Internet Calling: Available" and does not pick up the name of the sip provider from my xml file.

I'm in your same situation with my main provider, actually a hosted Asterisk box. With others providers I get the "Searching" and the icon showing, so I guess it's some kind of incompatibility between MS SIP implementation or standard template and some providers.
Gotta read better the configuration documentation to see if other parameters are available and need to be used in some cases.
Ka.

Have you looked at MS configs? they're slightly different:
<voip-provision>
<set name="SIPsettings"
value="&ltprovision key='1232ab01' name='YamazakiVoIP'&gt
&ltuser account='example\useraccount' password='test'
uri='sip:[email protected]'
allowedauth='digest'/&gt
&ltsipsrv addr='1.2.3.4' protocol='UDP'role='proxy'&gt
&ltsession party='First' type='pc2pc' /&gt
&ltsession party='First' type='pc2ph' /&gt
&lt/sipsrv&gt
&ltsipsrv addr='1.2.3.4'
protocol='UDP'role='registrar'/&gt
&lt/provision&gt" />
/>
</voip-provision>
That is from msdn

They use the IP instead of hostname?
Ka.

no, not that. just the first line is different.
i am trying now.... and it's not working... won't install cab

To help out people, here is my VOIP config file. I am connecting to my own asterisk box.
Code:
<wap-provisioningdoc>
<characteristic type="VoIP">
<parm name="SIPSettings"
value="<provision key='1232ab01' name='NAME OF YOUR VOIP PROVIDER'>
<provider name='NAME OF YOUR VOIP PROVIDER' />
<user account='YOUR VOIP ACCOUNT NAME' password='YOUR VOIP PASSWORD'
uri='sip:VOIP ACCOUNT [email protected] OF VOIP SERVER'
allowedauth='digest'/>
<sipsrv addr='FQDN OF VOIP SERVER' protocol='UDP' role='proxy'>
<session party='First' type='pc2pc' />
<session party='First' type='pc2ph' />
</sipsrv>
<sipsrv addr='FQDN OF VOIP SERVER' protocol='UDP' role='registrar'/>
</provision>" />
</characteristic>
</wap-provisioningdoc>
Do use the fully qualified domain name, and not the IP address of your sip server. It fails when trying to use IP for some reason.

I am running out of ideas. I can see now that the client logs into my PBXes account, but i can't make voip call or receive one. When dialing my extension i get the prompt from PBXes that the prson....is on the phone and phone just displays "Internet Calling: Available" doesnt display sip provider name.

bartp said:
I am running out of ideas. I can see now that the client logs into my PBXes account, but i can't make voip call or receive one. When dialing my extension i get the prompt from PBXes that the prson....is on the phone and phone just displays "Internet Calling: Available" doesnt display sip provider name.
Click to expand...
Click to collapse
It sounds like you installed voipfiles.cab and not WM6VoIP.cab. I said specifically that voipfiles.cab would not work right.

Qapf said:
It sounds like you installed voipfiles.cab and not WM6VoIP.cab. I said specifically that voipfiles.cab would not work right.
Click to expand...
Click to collapse
Hi,
I did install WM6VoIP.cab

bartp said:
Hi,
I did install WM6VoIP.cab
Click to expand...
Click to collapse
Only other thing I can think of is ensure you are using a domain and not an IP to refrence your SIP server, and double check all settings. These files were stolen off a VOX, where they didn't work perfectly either so I can't really say this component works all that well. When HTC releases their unbranded rom hopefully these VOIP files will be in it so they can be ripped out.
If someone still has the beta TMO roms it might be interesting to check and see if the voip dll's are in there.

Voip package available?

I'm not sure but I read through these threads:
http://forum.xda-developers.com/showthread.php?t=299950&highlight=voip
http://forum.xda-developers.com/showthread.php?t=303493&highlight=voip
Is there a seperate WM6 VOIP cab available somewhere? I don't see the suggested files, so I assume that I don't have it on my WWE WM6 rom.

Try search for VOIP...or look through todays postings for the same question:
and try these two posts
http://forum.xda-developers.com/show...highlight=voip
http://forum.xda-developers.com/show...highlight=voip
A quick search for VOIP will give you same answers

epmulligan said:
Try search for VOIP...or look through todays postings for the same question:
and try these two posts
http://forum.xda-developers.com/show...highlight=voip
http://forum.xda-developers.com/show...highlight=voip
A quick search for VOIP will give you same answers
Click to expand...
Click to collapse
Well, as you may have noticed I've found those threads, but I saw that the most of the thread is regarding HERMES.
I was wondering if anyone with an Artemis has been able to turn on VOIP (native voip)
I did manage to install the package as mentioned in the threads above, as well as put in the right config files. Also, the "Internet Calling: Available" today plugin is correctly displayed. However, I cannot switch dial pads and I don't get the correct status (connected).

Same problem here
Setup was done with Sip Config Tool 2.0.1
The plugin is configured : "Always, if available"
When connected by wlan or activesync the plugin displays : "Kein Empfang"
Disconnected from network displays : "Available"
Hopefully someone can help me

Guys I've got it working just fine on an xda orbit. There does seem to be a little bug though and that is when it's says "Searching" and "Available" on the today screen. Available actually means searching and searching means available
When searching is displayed, click on it in the today screen and you might notice a slight change in the signal which means it has switched to voip rather than gsm. Go to the phone screen and you'll see that the network has changed to your voip provider and any call you make will be routed through them.
I have downloaded sjphone yesterday and configured it to use my sip voip provider and it works brilliantly. The sound quality in sjphone is absolutely brilliant compared to the native voip, you should try it.

Finally it's working...
I tried to deinstall the plugin and after prompting an error it worked
The homescreen plug signals "searching" but as you said before it means "availabe". There are still a couple of things:
1) no incomming calls... i can't find the stun settings
2) +4930xxxxxx format doesn't work, i've to type 030xxxx
3) doesn't work after standby
Which version of sjphone are you using? There seems to be nothing available for wm 6

Hi BlueD,
I'm glad it's working for you. I tested incoming calls and that worked nicely as well without configuring any stun. The voip I used were sipgate and callcentric.
There's a post somewhere on one of the big voip threads and the guys managed to customize the dialing plans so that you can dial without using the international format. Do a quick search on voip dialing plan and you should find it somewhere.
Well obviously it doesn't cause the wifi disconnects, hence making it only useful for dialing out rather than receiving calls, except ofcourse if you want to leave the device on all the time, but that's not a very feasible solution.
The sjphone I downloaded was the one for v.1.60.303c Pocket PC 2003SE, it works nicely with excellent call quality. I also think you don't really need native voip capabilities to run that, which makes me think we could have had this on WM5 hmmm...

OK.. just fyi - i got a little bit more success in using the native VOIP solution. I had to flash from the WWE 6 to the BnB 2 ROM, then install the VOIP.cab and SipConfigTool. Now i can receive calls, but cannot place any... not sure why. Also, when i receive a call the sound is CRAP.. probably some codec issue here.

What type of internet connection have you?
Have you open ports on your router necessary for SIP, inbound and out?

epmulligan said:
What type of internet connection have you?
Have you open ports on your router necessary for SIP, inbound and out?
Click to expand...
Click to collapse
Yep I did. I got this confirmed by testing it with a softphone on my PC, which works great (same voip provider etc).

Skype For 3 Network (Three, Drei, tre, tri, Hutchison) on Windows Mobile with iSkoot

This is a tutorial to get the Skype service from Three working on a not
official supported Three mobile.
1) Download an install iSkoot for WinMo http://www.iskoot.com/pc_download/WindowsMobile/iSkootForSkype1.1.54_WMpro.CAB?code=
2) Install iSkoot and start it, but do NOT sign in now, just let it create
the registry entries we need! Exit the app when the login screen appears!
3) Head with your favorite Registry Editor to
HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE
4) Update the following entries with your "Three Country specific address"* :
BackupHost
CallUrl
DefaultSkHost
Pushhost
If Pushhost don't exist DO NOT create it!
5) Exit your Registry Editor and start iSkoot !
You have to be on your Three Data Connection for iSkoot to work,
it will not work with WiFi, i think!
The first time you try to log in it can take up to 5 min, don't ask me why.
--------------------------------------------------------------------------
*)
How to get your "Three Country specific address"
Look first at the bottom of the post maybe someone did already the work for you!
1) First you need a browser which is capable of faking a User Agent
We have to force "Planet 3" to believe that we are using a ThreeSkype
capable Device (which we use but they don't know )
I used the NetFront Browser, install it you should easily find it on the net.
2) Open NetFront and go to:
Menu -> Browser Setting -> Menu -> Network
there is a option to change the User-Agent
3) Make a new User-Agent:
We have to fake a Three distributed Phone which is capable of Skype.
I used Sony Ericsson W910i
Change the User-Agent to:
SonyEricssonW910i/R1CA Browser/NetFront/3.4 Profile/MIDP-2.1 Configuration/CLDC-1.1
and the platform to:
SonyEricssonW910i/R1CA029
Save the settings!
4) Now go to Planet 3 with your NetFront Browser
(use the Three data connection)
the url for Austria is:
http://mobile.drei.at/hb/homebase/HutchKey
and download the Skype *.jad file SAVE it to your Device! DO NOT INSTALL IT!
5) Open the Skype *.jad file with a text editor:
search for:
BackupServerUrl: and get your "Three Country specific address"
--------------------------------------------------------------------------
6 Optional)
You could also use this to get the Java Version for a non WinMO Phone:
on the same url you found the Skype *.jad file there is the *.jar file
Just check your History and change the extension from *.jad to *.jar
Download the *.jar file to your device!
7 Optional)
Open the Skype *.jad file with a text editor:
Delete the whole "MIDlet-Cerificate-1-1:......" entry and save it!
I used this trick to install the Java version from the W910i on the
****ty Nokia 3120 i got on my contract, although it's not supported by Three
it works perfectly!
Three Country specific addresses:
Drei Austria: http://msite.drei.at/skype
Three UK: http://mobile.three.co.uk/948
Three Ireland: http://mobile.3ireland.ie/948
Planet 3 Url's:
Drei Austria: http://mobile.drei.at/hb/homebase/HutchKey
Three UK: http://mobile.three.co.uk/hb/singleurl
Three Ireland: http://mobile.3ireland.ie/hb/HutchKey

It would be nice if some one couldmake install cab's for the country specific
Registry entries!
I also added the Net Front Browser as a attachment!

Advantage of using Skype For Three
Advantage of using Skype For Three:
If you make a call through Skype it will root it to a normal GSM-Call.
What does that means:
You don't need a 3G connection, a normal GSM Signal will be enough
to make Skype calls.
It will not make use of your data connection during the call, so no data
will be used the call is free !!!
Because it is a normal call, all functions are working as you would expect!
The Sound is rooted through your ear peace, the screen is shutting off to
prevent accidental actions.
You can also make a group conversation and mix up people from Skype an
conventional phone numbers.
Incoming skype calls are also rooted to a normal GSM Call.

Ikkari said:
This is a tutorial to get the Skype service from Three working on a not
official supported Three mobile.
1) Download an install iSkoot for WinMo http://www.iskoot.com/pc_download/WindowsMobile/iSkootForSkype1.1.54_WMpro.cab
2) Install iSkoot and start it, but do NOT sign in now, just let it create
the registry entries we need! Exit the app when the login screen appears!
3) Head with your favorite Registry Editor to
HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE
4) Update the following entries with your "Three Country specific address"* :
BackupHost
CallUrl
DefaultSkHost
Pushhost
If Pushhost don't exist DO NOT create it!
5) Exit your Registry Editor and start iSkoot !
You have to be on your Three Data Connection for iSkoot to work,
it will not work with WiFi, i think!
The first time you try to log in it can take up to 5 min, don't ask me why.
--------------------------------------------------------------------------
*)
How to get your "Three Country specific address"
Look first at the bottom of the post maybe someone did already the work for you!
1) First you need a browser which is capable of faking a User Agent
We have to force "Planet 3" to believe that we are using a ThreeSkype
capable Device (which we use but they don't know )
I used the NetFront Browser, install it you should easily find it on the net.
2) Open NetFront and go to:
Menu -> Browser Setting -> Menu -> Network
there is a option to change the User-Agent
3) Make a new User-Agent:
We have to fake a Three distributed Phone which is capable of Skype.
I used Sony Ericsson W910i
Change the User-Agent to:
SonyEricssonW910i/R1CA Browser/NetFront/3.4 Profile/MIDP-2.1 Configuration/CLDC-1.1
and the platform to:
SonyEricssonW910i/R1CA029
Save the settings!
4) Now go to Planet 3 with your NetFront Browser
(use the Three data connection)
the url for Austria is:
http://mobile.drei.at/hb/homebase/HutchKey
and download the Skype *.jad file SAVE it to your Device! DO NOT INSTALL IT!
5) Open the Skype *.jad file with a text editor:
search for:
BackupServerUrl: and get your "Three Country specific address"
--------------------------------------------------------------------------
6 Optional)
You could also use this to get the Java Version for a non WinMO Phone:
on the same url you found the Skype *.jad file there is the *.jar file
Just check your History and change the extension from *.jad to *.jar
Download the *.jar file to your device!
7 Optional)
Open the Skype *.jad file with a text editor:
Delete the whole "MIDlet-Cerificate-1-1:......" entry and save it!
I used this trick to install the Java version from the W910i on the
****ty Nokia 3120 i got on my contract, although it's not supported by Three
it works perfectly!
Three Country specific addresses:
Drei Austria - Confirmed: http://msite.drei.at/skype
Three UK: http://mobile.three.co.uk/948
Planet 3 Url's:
Drei Austria: http://mobile.drei.at/hb/homebase/HutchKey
Click to expand...
Click to collapse
WOW!!!!!
Great!!!!
Its working with my samsung i780 with uk network.
Thank you

Where is the clue? When I do not use the data connection and use the GSM instead I have to pay the normal phone fee. So it is not a free call.

umm i dont understand what all of this is about but it seems like something very useful can someone expain in lame man term what this is.. please

hanserson1 said:
Where is the clue? When I do not use the data connection and use the GSM instead I have to pay the normal phone fee. So it is not a free call.
Click to expand...
Click to collapse
It only works on Three with the Skype package, with this Skype package the GSM call is free!!

tapash said:
WOW!!!!!
Great!!!!
Its working with my samsung i780 with uk network.
Thank you
Click to expand...
Click to collapse
Can you please give me the Planet 3 from UK, i want to add it in the first post... also if someone else hase the URL's for "Three Country specific addresses" and planet 3 for other three countries, post it please and help other user save time!!

Ikkari said:
Can you please give me the Planet 3 from UK, i want to add it in the first post... also if someone else hase the URL's for "Three Country specific addresses" and planet 3 for other three countries, post it please and help other user save time!!
Click to expand...
Click to collapse
http://mobile.three.co.uk/hb/singleurl
but suddenly my iskoot stopped working. can anyone help. it constantly saying unable to connect. can u pls chek ur reg of iskoot and tell me the values?

The Three Skype servers are sometimes out off order. Just try to connect again, you can also call the Three service team to ask if their Skype servers have problems right now. If the servers are alright try to uninstall iSkoot an reinstall it.
A cab for the registry changes would be really helpful, the *Three Country specific addresses* cloud be added through a text or ini file.
Can someone give us a hand with the cab... i would do it myself but i have no clue how it's done...

you are telling us, that we can make fee free calls? or have i miunderstood something...
were's the hook? or limits?

Yes you can make fee Free calls! The hook is your GSM provider has to be
http://www.three.com/ i think at the moment they are providing their service in about 10 countries.
If http://www.three.com/ is your GSM provider and you took the Skype package with your contract, Skype calls are totally free no Data or
Minutes will be charged!

iSkoot working with 6.5 ROM but not with 6.1
Hi,
as it's a pretty recent thread - compared to the other iSkoot threads I've found on xda-dev - so I post this here however I'm using a Diamond and not a BS...
I also came across this tutorial somewhere - MoDaCo or 3G I think - and when my Diamond arrived I've instantly flashed it with a WM6.5 ROM and installed iSkoot - and worked like a charm...
However I've decided to downgrade to official WM6.1 this Monday and installed everything, fine tuned the system, put some cool themes on and synced my Outlook data just to find out that iSkoot is not working on that rom
Tried everything without success so I reflashed WM6.5 and voila iSkoot’s working again…
I have to start to investigate the matter - I'll save the registry and other settings on the two ROMs and hopefully I'll find out what makes the difference...
Will posting back the results
ps. Just for the record credit to the people who make this happen

Wired some friends and I are using iSkoot on Win 6.1 and we don't have any problems! I think it's a specific problem with your 6.1 ROM...

help
i cannot seem to download skype , i have configured the browser (netfront 3.5) which enables me to open three.co.uk page but when i click on download nothing happens. Cld u please upload the skype app. thanks

MALONGZY said:
i cannot seem to download skype , i have configured the browser (netfront 3.5) which enables me to open three.co.uk page but when i click on download nothing happens. Cld u please upload the skype app. thanks
Click to expand...
Click to collapse
Maybe you did not set the User-Agent correctly??
Anyways you don't really need to do this if you are from UK !!
Just install iSkoot and change the following Registry settings
to http://mobile.three.co.uk/948
HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\BackupHost
HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\CallUrl
HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\DefaultSkHost
and if this entry exists change it, else ignor it!
HKEY_CURRENT_USER\SOFTWARE\ISKOOT\SKYPE\DEVICE\Pushhost

the ROM is an official HTC
Ikkari said:
Wired some friends and I are using iSkoot on Win 6.1 and we don't have any problems! I think it's a specific problem with your 6.1 ROM...
Click to expand...
Click to collapse
yep it's obviously the ROM (or I should rather say its settings) so I'll look into it but I just wanted to save some man hours if sy happen to know the solution

CAB for Three Ireland
Does anybody have the CAB for three Ireland. I've tried contacting three, but because it's not an official 3 phone, they won't help me out.
I had the 3 Skype on my old Nokia E65 & it's great the way it worked fully integrated with the phone. The winmo Skype that I have on my HD is rubbish & pointless, coz you have to use the speakers & the application stops everytime you get a cellular phonecall (which just defeats the purpose) & I've ended up not using it anymore.
Cheers

Sorry i have no cab, but fards was so kind and offered me making a cab.
But we need Three Country specific address for Ireland, there is a tutorial in the first post how to get that adress.

lads, i made up a guide on boards.ie
http://www.boards.ie/vbulletin/showthread.php?t=2055448256&highlight=iskoot
pm me spipov there, or write on the thread.
Galwegian, i sent you the wrong link, sorry about that
i will quote it here:
hi everyone. i thought id write a short guide on how to get that done. i remember having a lot of trouble around october and a lot of digging around finally got me happy with my diamond and iskoot.
i wanted a device that would have iskoot, bluetooth to use on the car stereo
as well as music and gps while driving. and the diamond seemed to be the one (my old trinity wouldnt connect to 3 network).
therefore this does not use data settings but free skype to skype calls if you top up by 10 euros every month
i had an issue with my older diamond where i could not scroll down or up contacts once id rung or had a chat with someone on the diamond but my 2nd diamond doesnt seem to have this problem. i think iskoot might have updated their client as i had asked about it on their forums.
anyway,
1. download the iskoot client. ive attached it here for conveniency as iskoot.com are difficult to work around.
2. Download a registry editor for windows mobile - your own or the one attached here.
3. Install both. Run iskoot once at least (As it will create some registry entries).
4. You can try signing in with skype but it wont work.
5. Make sure you have installed all 3 mobile settings. most pocket pc's would have installed them, but they are at the bottom of the post if you need them.
6. Run The registry editor.
7. Make your way to:
[HKEY_CURRENT_USER\Software\iSkoot\Skype\Device]
and change:
"CallNumber"="+353833333518"
then to
[HKEY_CURRENT_USER\Software\iSkoot\Skype\Device]
make sure those are in:
"BackupHost"="http://mobile.3ireland.ie/948"
"BaseUrl"="http://mobile.3ireland.ie/948"
"CallUrl"="http://mobile.3ireland.ie/948"
"DefaultSkHost"="http://mobile.3ireland.ie/948"
"PushHost"="http://mobile.3ireland.ie/948"
save and make sure to exit both iskoot and registry editor then starting again. it should work fine if you have 3g signal and you can configure your settings in iskoot as you please.
3 Planet settings:
as in other helpful posts on this forum:
set your opera/internet explorer/whatever browser homepage to be:
http://mobile.3ireland.ie/hb/HutchKey
this will bring you to my3 page where you can check balance etc
Quote:
http://www.boards.ie/vbulletin/showp...03&postcount=4
Connection Name: 3
Data Bearer: Packet Data
Access Point Name: 3ireland.ie
User name: -
Prompt Password: No
Password: -
Authentication: Normal
Homepage: http://mobile.3ireland.ie/hb/HutchKey
Network Type: IPv4
Phone IP address: Automatic
DNS address: Automatic
Proxy server address: None
Proxy port number: 0
Connection Name: 3MMS
Data Bearer: Packet Data
Access Point Name: 3ireland.ie
User name: -
Prompt Password: No
Password: -
Authentication: Normal
Homepage: http://mms.um.3ireland.ie:10021/mmsc
Network Type: IPv4
Phone IP address: Automatic
DNS address: Automatic
Proxy server address: mms.3ireland.ie
Proxy port number: 8799
My 3 can be located and bookmarked from homepage
Click to expand...
Click to collapse