Does anyone know how to set 838 pro always in landscape mode?
Thanks a lot
yohanes_1 said:
Does anyone know how to set 838 pro always in landscape mode?
Thanks a lot
Click to expand...
Click to collapse
Yup, you go to "settings" / "screen"...
There are settings for you to set it in landscape (left / right handed mode) too!
Hope this helps.. Cheers.
I have tried it just like u said, but when u slide open the keyboard and slide close it, it's back 2 portrait mode lol
does anyone really got the answer please?
yohanes_1 said:
I have tried it just like u said, but when u slide open the keyboard and slide close it, it's back 2 portrait mode lol
does anyone really got the answer please?
Click to expand...
Click to collapse
go read your manual book!!!
Binyo said:
go read your manual book!!!
Click to expand...
Click to collapse
Manual for 838pro WM6 already out ???
jtsc said:
Manual for 838pro WM6 already out ???
Click to expand...
Click to collapse
how to change to lanscape mode in wm6, pretty much the same with wm5!!!
so I think he can use wm5 manual book for basic knowledge like that.
post#2 already answered his Q anyway
Binyo said:
how to change to lanscape mode in wm6, pretty much the same with wm5!!!
so I think he can use wm5 manual book for basic knowledge like that.
post#2 already answered his Q anyway
Click to expand...
Click to collapse
Before u POST i think u should try it first!!! change u'r device at landscape mode, open u'r hardware keyboard then close it, is it still at landscape mode lol? already answered? Not yet i think
calm down
Seems not so easy to make permanent change to landscape... yes, if you change in settings, all is ok until you open the kb and close it.
Take a look at this post from Wizard forum... http://forum.xda-developers.com/showthread.php?t=304136 (find searching in google )
Seems like need to change the sensor who make the change when open/close the kb.
What about a little research?
Regards.
You can just stick a magnet to the side of the phone by where the call keys are at and that'll keep your phone in landscape mode
deviusdragger said:
You can just stick a magnet to the side of the phone by where the call keys are at and that'll keep your phone in landscape mode
Click to expand...
Click to collapse
Yes, sure i know too the issue with magnet and the camera sensor...
But really seems the fix for this is not so easy...i've tried same changes on the registry, but no success.
Well, now i have mapped the Camera button to the Rotate Screen function (this can be done in Settings /System /Screen), so i can change back to landscape pressing only one button, when close the keyboard.
Regards.
jcespi2005 said:
Yes, sure i know too the issue with magnet and the camera sensor...
But really seems the fix for this is not so easy...i've tried same changes on the registry, but no success.
Well, now i have mapped the Camera button to the Rotate Screen function (this can be done in Settings /System /Screen), so i can change back to landscape pressing only one button, when close the keyboard.
Regards.
Click to expand...
Click to collapse
Thanks JCESPI, i've tried at the address that you gave me & didn't solve the problem yet (same like they did )
but for now i should try like u to mapped the camera button to rotate the screen, maybe someday if you solved this problem please write @ this forum ya
Thanks man
yohanes_1 said:
Thanks JCESPI, i've tried at the address that you gave me & didn't solve the problem yet (same like they did )
but for now i should try like u to mapped the camera button to rotate the screen, maybe someday if you solved this problem please write @ this forum ya
Thanks man
Click to expand...
Click to collapse
Sure, if i find the fix i'll post here...
Related
As a relative Newbie to PDA customisation - in a number of Threads deatling cooked ROMs a number are offered with or without "Cube".
What is "Cube" and whatis the difference between ROM's with and without "Cube"?
btw - I recently down loaded the O2 Premium v2 w/o cube for my Orbit, no issues installing and working well, one or two minor issues, but easily overcome with a tweak of settings
Best way is to show it! See the cube?
http://www.youtube.com/watch?v=4HNP1lgbR98
hi all,
can someone please explain how you get the 'cube' to work?
I am running ARTEMIS TOUCH 3.01 WWE - FULL WITH CUBE and everything works OK except I cant see the cube even tho i have it enabled in the TouchFLO applet under system settings.
Thanks and excuse my ignorance... i'm kinda new at this updating ROM's stuff.
-Axel
Problem solved thanks. Found a pictorial explanation on one of tom_codon's posts... thanks tom.
-Axel
I’ve been looking through this forum for two days now and still can’t find a definitive answer to this question…
Is there any way you can modify the ‘Cube’ touchflow application so that it is a ‘proper’ cube with 4 sides ( i didn’t know you could have a cube with only 5 surfaces!! but i digress ) and add shortcuts on the new 'forth' side to launch your chosen applications?
Please can someone give a definitive answer thanks
can you point me in the direction of getting the cube to work - I'm where you were.....searched for tom's post can't locate it???
Axel2k5 said:
I’ve been looking through this forum for two days now and still can’t find a definitive answer to this question…
Is there any way you can modify the ‘Cube’ touchflow application so that it is a ‘proper’ cube with 4 sides ( i didn’t know you could have a cube with only 5 surfaces!! but i digress ) and add shortcuts on the new 'forth' side to launch your chosen applications?
Please can someone give a definitive answer thanks
Click to expand...
Click to collapse
A 'Proper Cube' has 6 sides
Im a new too and cant seem to get the cube thing working...its probably really obvious. Anyone know what the button name is for the cube so I can assign it?
blackcat2000 said:
Im a new too and cant seem to get the cube thing working...its probably really obvious. Anyone know what the button name is for the cube so I can assign it?
Click to expand...
Click to collapse
i havent been able to get it working wither...
mugglesquop said:
i havent been able to get it working wither...
Click to expand...
Click to collapse
On my XDA simple press and hold windowslogo button and works the cube.
xanadu said:
On my XDA simple press and hold windowslogo button and works the cube.
Click to expand...
Click to collapse
doesnt do anything on my MDACIII
http://www.youtube.com/watch?v=4HNP1lgbR98
finesse said:
http://www.youtube.com/watch?v=4HNP1lgbR98
Click to expand...
Click to collapse
cool cool. i'll have to watch it later, youtube is filtered at work
mugglesquop said:
doesnt do anything on my MDACIII
Click to expand...
Click to collapse
Did you read my signature about ROM?
xanadu said:
Did you read my signature about ROM?
Click to expand...
Click to collapse
nope lol
mugglesquop said:
nope lol
Click to expand...
Click to collapse
in this rom cube is included and assigned to "windowslogo" button
ah rite... how do u assign it? i cant find anything related to the program once its installed... nothing in /Windows/Startup, and nothing in Programs..
mugglesquop said:
ah rite... how do u assign it? i cant find anything related to the program once its installed... nothing in /Windows/Startup, and nothing in Programs..
Click to expand...
Click to collapse
Cube assigned in this rom out of box to "windowslogo" button.
"Hbutton 2.1 [UPDATED] Startmenu button, ok\close button and camera mapped to hbutton in full version
Startmenu button
1st press = start menu
1st vibrate (hold button down) = mouse
2nd vibrate = cube"
from topik: http://forum.xda-developers.com/showthread.php?t=344170
xanadu said:
Cube assigned in this rom out of box to "windowslogo" button.
"Hbutton 2.1 [UPDATED] Startmenu button, ok\close button and camera mapped to hbutton in full version
Startmenu button
1st press = start menu
1st vibrate (hold button down) = mouse
2nd vibrate = cube"
from topik: http://forum.xda-developers.com/showthread.php?t=344170
Click to expand...
Click to collapse
ok thanks having a look now
Yea but.... I can't youtube here in Turkey.... using on O2 XDA Orbit ... tell me more about the Cube please
Hi,
I would like to share with You my little app, that I wrote to make using HTC easier and more comfortable. With this app You can assign finger friendly keybord when stylu is In, and small keyboard for stylus when it is out. Unfortunately it works only on devices with stylus sensor like HD, Diamond, Touch Pro, SE X1 (I hope it works, I've tested with BlackStone only). If you have some suggestions, ideas or if You run this app on other devices please let me know.
You can download it from here (Sorry for my English and google translated page).
I've updated apllication to version 1.1.2
New features:
- support landscape mode
- up to four screen keyboard support
I hope it'll be usefull.
nice app...i'm sure it will help me, as it seams that my touch hd keep changing input keybord completely randomly and with no logic whatsoever so will give a try...hope it will bring an law and order to that mess
dobra robota kolego
Uh... I don't think X1 has a stylus sensor...
ipporek said:
Uh... I don't think X1 has a stylus sensor...
Click to expand...
Click to collapse
So it will not work on SE Sorry.
I've updated apllication. More info at the first post.
hi
hi any screenshots available? does it work like sipchange ? able to auto choose which keypad u want after startup ?
I've attached some screens. During system start, application is checking screen oreintation and stylus state and then deciding which keyboard should be used.
Hi, this sounds very interesting. Unfortunatly the link doesn´t work.
Could you just post it here?
Thx, nearly
Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl
nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Still doesn't work
nitro__67 said:
Direct link http://lemon.byethost15.com/downloadImac112. I would not like to upload to different servers. It 's easier to manage new versions now.
Click to expand...
Click to collapse
Nope, can't download. Would love to try this out, it's a good idea.
Can you supply another download location?
Thanks for your efforts.
Use the link in first posting, deactivate Google translation:
http://lemon.byethost15.com/download/imac
pobierz = download.
Cab attached - will delete attachment, if nitro_67 wants to.
File uploaded.
nitro__67 said:
Unfortunately link didn't work, don't know why. I 've uploded file here, but remember, the newest version always can be found at http://green-lemon.pl
Click to expand...
Click to collapse
Thanks man. It works fine in blackstone.
Link doens't work for me too...
I tried the Cab file above, it really works, meaning it will change the Imput method according to stilus in or out.
But if I closed the phone or make a soft reset, the first time I want to write a message the imput method is still the standard one
You must setup program to start service with Windows.
Do you mean select the option "Run at Start up" ?
Yes I did select it but as I mentionned, after a reset or turning the mobile off, the first message I will write will open with the standard keyboard... I then move stilus in and out and it starts to work correctly until the next reset or turn off
So strange, because program is started. Maybe You are using keyboard which is loaded leter. Uncheck 'run at start' and add shortcut to autostart. After this program should start after all proceses and services.
Good idea, I will have a try...
nitro__67 said:
If you have some suggestions, ideas
Click to expand...
Click to collapse
Hi Nitro, is it possible to launch an application when you take out the stylus? I would love to have Phatpad opened when I do so, to take a quick note.
I won't mind closing it the one time I pull out the stylus in another app.
Hope you can help.
Along the bottom of the phone there's a home button and an endcall which, within programmes, seem to do the same thing - take you back to the today screen. Or, in my case the 6.5 CHome thingy. And the back button in most apps takes you to the home screen too - so that's three buttons largely doing the same thing most of the time.
The new phones with 6.5 preinstalled will have a windows-flag start menu button, I assume this will open up the new hexagony start menu.
Is there a way of remapping the home button so it launches the start menu instead?
That is EXACTLY what I have been thinking for the last days. Pressing Home-key should naturally bring up the start-menu.
Nice idea, even because reaching the top left corner with your right thumb(maybe for left handed it's easier ) while holding the HD with the right hand is a little bit tricky
I'd like something small to do this but I have a feeling most people will return with the suggestion "use aebplus to remap"
I have the same feeling wiggz, There must be a registry key or something that can be changed and put into cab format? Anyone got any ideas?
Me to
So, we are many!!
I too have been looking for a way to do this for ages.
I too will be watching this thread with interest and hope.
Nick
Wiggz said:
I'd like something small to do this but I have a feeling most people will return with the suggestion "use aebplus to remap"
Click to expand...
Click to collapse
No aeblus cannot map the home button as it's hard coded into manila!
bonesy said:
I have the same feeling wiggz, There must be a registry key or something that can be changed and put into cab format? Anyone got any ideas?
Click to expand...
Click to collapse
so as the home button is coded into manila it mean's one has to play with the manila files and remap to start menu all that would mean is to change some scripts!!
bottomline Home button in theory can be mapped to the start menu!! so it's plausible!!!
i'm going to watch this thread as well --- i've been looking for this since I got hold of my HD. I've already remapped the "back" button to S2U2 via AEB since you are correct, essentially the home, back, and end buttons all work very similarly.
Hoping that someone posts a solution to this!
i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!
i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!
Thanks,but could give more informations to remap keys,please ? The list is empty when i launch the application ...
Same here. I was so happy when I found this thread..
When I tried installing that, it did not work... Maybe it was my ROM.
There are REG keys that remap home in certain cituations, i.e. manilla but I have yet to find a way to get the reg key to do anything else.
The new keypad.dll maps it to a normal vk_lwin, so you can remap it as you like.
Unfortunately I have not yet seen it an any ROM.
gfreek said:
No aeblus cannot map the home button as it's hard coded into manila!
so as the home button is coded into manila it mean's one has to play with the manila files and remap to start menu all that would mean is to change some scripts!!
bottomline Home button in theory can be mapped to the start menu!! so it's plausible!!!
Click to expand...
Click to collapse
Ok I take this back if I can get the tool given by jdmsleepr to work!!
jdmsleepr said:
i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!
Click to expand...
Click to collapse
Many thanks for this jdmsleepr you sure will make many hd owners very happy if this tool actually works!!
However I have installed this and configured the buttons to my liking but it's not working! upon start up I get error "SMartTouch service is not found" so have I missed something? can you please give us more details on how one configures this tool of yours?
gfreek said:
Ok I take this back if I can get the tool given by jdmsleepr to work!!
Many thanks for this jdmsleepr you sure will make many hd owners very happy if this tool actually works!!
However I have installed this and configured the buttons to my liking but it's not working! upon start up I get error "SMartTouch service is not found" so have I missed something? can you please give us more details on how one configures this tool of yours?
Click to expand...
Click to collapse
It is for Diamond and the author says here post 10 "For the touch HD, maybe you should download HTCAPI.DLL somewhere, put it in /Windows and try again". Haven't read the whole thread though so not sure if this is what the problem is.
i know its a little confusing to get it started...so heres what you do...install cab, go to program files\dredsensor and click on dredsensor.exe and a config.ini will appear...now close out whatever app you are using to view files...and open dredsensor...now you will see default under name...tap default and then click menu, then edit...change type to launcher...then go to click and tap the gray box next to the home key...go to events and chose Misc:Start, hit select, hit ok to comfirm, change whatever others you want to...then hit save, then hit ok to confirm...then hit exit...then you should be good to go...hope this helps!!
custardo01 said:
It is for Diamond and the author says here post 10 "For the touch HD, maybe you should download HTCAPI.DLL somewhere, put it in /Windows and try again". Haven't read the whole thread though so not sure if this is what the problem is.
Click to expand...
Click to collapse
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Marcdu81 said:
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Click to expand...
Click to collapse
can i know what r the dependencies .. i mean what files r needed for the four buttons to run as i use kitchen... i need to knw ...thanks
not working for me,installed app then fix,selected type:hardkeysimul,set the home to start,tried it and all I get is an error popup which stays onscreen all the time even after soft reset,had to do a hard reset. Any help from you who got this thing working?
Marcdu81 said:
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Click to expand...
Click to collapse
Thanks! just did this as per your instruction but still no joy!! still get the same error message on start up "SMartTouch service is not found"
Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.
dr_s said:
Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.
Click to expand...
Click to collapse
by default rotation with gyro does not work on Rhodium.
You can use gyrator2 if you wish to enable this functionality.
Cheers,
Beasty
I have the same problem. Screen rotates in opera, but not in Album.
same here, and gyrator is not the perfectly program for this... its slow, and it isn't integrated with WM after install. its just a stand-alone app what runs as the same way as other programs (you can also close it by taskmanager).
Also taksmanager doenst close programs by clicking [X] ?? (even when i select it)...
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Well found! Very Handy
Thanks
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I understand this works great. few questions:
Doesn't it slow the device?
What programs do you suggest to be rotating without the screen sliding out and what programs do you think shouldn't flip to landscape because it gets annoying?
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
thanks. great find. but same question as above.
Why HTC has not made it default for the album?
dr_s said:
thanks. great find. but same question as above.
Why HTC has not made it default for the album?
Click to expand...
Click to collapse
The same question could be applied to many things HTC have done with the Rom on the Rhodium.
At the end of the day, do what we do best here, add the functionality that you want, then fix any problems that occur afterwards.
I haven't noticed any adverse affects using gyrator, as yet anyway.
Cheers,
Beasty
does anybody by any chance have the window class of sygic mobile drive (previously mcguider)??
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
how do you add this file to the reg for us newbs please
thanks for any help
Doesn't it automatically display the picture at the maximum size? Meaning if it is a landscape picture it displays it in landscape and if it is a portrait picture it displays it in portrait? I actually prefer the way it is done in the new album which I am running on my FUZE.
combat goofwing said:
how do you add this file to the reg for us newbs please
thanks for any help
Click to expand...
Click to collapse
Guide for newbies here
http://htctouchpro2.wordpress.com/2009/06/21/htc-touch-pro2-hacks-–-part-2-–-g-sensor-everything/
thanks thats why i love this site, you get what you think is a great phone and they just help you make it even better
and to think i thought my viewty was the muts nuts
Could someone help me out with the TomTom reg key? I get the modulename bit right, just point it to tomtomnavigator.exe. Don't really understand the whitelist key. What should the value be for Tomtom?
Thanks.
EDIT: Just found it in the topaz section. For anyone wlse who needs to know, it is "MunichWinClass" for some reason. Thanks to infoman68 for that.
Awsome thread I downloaded and installed the gyrator2, but I cannot figure out what plugin/program to grab from microsoft to install that dotnet 3.5 on the phone to get gyrator to work. can someone please point me to the correct file?
thanks.
to anyone else wishing to add an app to HTCs GSensor list in the reg and not knowing the window title or class...
download Gyrator2, install and run. Add a new event. Choose learn. Take stylus out. Make active the window you need the name of. Insert stylus. There! Gyrator has just told ya what ya need to know... Uninstall gyrator and add what it told ya to the reg...
nice post dude...
i am still trying to get the gyrator to work on my pro2.
did you also have issues with the dotnet thing?
Hello, brilliant suggestion from bigjezza. Myself I'm trying to get Microsoft Reader to react to my phone's gyrations. However when I bring up Gyrator 2 the MS Reader app is not listed. Actually it never came up in my program-list in the first place even though it did install and runs perfectly. Had to stick a shortcut in the Windows/Start-menu.
Any suggestion on how to get MsReader onto Garator's list, or does anyone know what the relevant data is for MsReader just like that?
Many thanks/McHan
Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I did install the .reg, then looked my self the new strings in the registry and everything looked OK, but the images on Album still do not respond to device rotation... Any other solution? Or it is need to activate or deactivate something else?
regards,
Tyrone
Hello,
First of all, sorry of my english, i am from spain.
One Question: does TP2 have acelerometer like for exaple Diamond or it only turns screen when you use the keyboard?
Yes. Yes it does.
malumbreras said:
Hello,
First of all, sorry of my english, i am from spain.
One Question: does TP2 have acelerometer like for exaple Diamond or it only turns screen when you use the keyboard?
Click to expand...
Click to collapse
Find out everything else here:
http://forum.xda-developers.com/showthread.php?t=519814
thank you all so much, it is important for me.
Thank you.
and if you don´t mind, another quewstion: when your are ussing TOM TOM is it posible to put screen landscape??
Thank you
are you sure it is possible to turn screen without ussing keyboard?
all videos i ve seen use keyboard to turn screen, and also a video of tom tom uses keyboard
malumbreras said:
are you sure it is possible to turn screen without ussing keyboard?
all videos i ve seen use keyboard to turn screen, and also a video of tom tom uses keyboard
Click to expand...
Click to collapse
The Opera browser does it automatically. For everything else, practically every TP2 owner has installed 'Gyrator 2' or 'screenChanger' (my favourite), which are free apps utilising the G-Sensor. They run pretty much silently and allow you to configure which programs you want to rotate etc.
Get the TP2 - You know you want to.
Yes. But only by sliding out the keyboard. You can use the G sensor, but then you have to adjust the registry.
Theres a reg hack to enable the change orientation function to be shown in the screen to change button assignments. So you can set when you hold down the send button it changes to landscape mode. And you don't have to pull out the keyboard!
I can't remember what it was mind.. but it's on these forums somewhere.
thank you all.
thank you brynweb for those programs.
thank you quarintus.
andrewrees: if you remember the post, please tell me.
thanks a lot
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
you dont need to use any program
there is a reg hack on here to allow it to tilt auto in things like calender etc etc
read this
http://forum.xda-developers.com/showthread.php?t=526701
I did the reg that doesnt need any program running and it works great. With a bit of modding I got it to do TomTom, too.
TomTom on PDA is OK, but it still doesnt have text to speach for spoken street names.
malumbreras said:
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
Click to expand...
Click to collapse
changeScreen does a better job of hiding itself than Gyrator. One day I'll use the reg hack, but I'm still in the tinkering stage where I can't make up my mind about what programs I want to rotate, so it's easier for me to use the program option right now.
bigjezza said:
I did the reg that doesnt need any program running and it works great. With a bit of modding I got it to do TomTom, too.
TomTom on PDA is OK, but it still doesnt have text to speach for spoken street names.
Click to expand...
Click to collapse
any info how i wouldnt mind tom tom in landscape
thanks
Has anyone tried this G-Config app?
http://forum.xda-developers.com/showthread.php?t=487991
http://pockethacks.com/g-config-configurator-for-the-new-sensorsdk-4/
it modifies the registry for you... I'm going to install later on today when I have time to play with it...
mozster said:
Has anyone tried this G-Config app?
http://forum.xda-developers.com/showthread.php?t=487991
http://pockethacks.com/g-config-configurator-for-the-new-sensorsdk-4/
it modifies the registry for you... I'm going to install later on today when I have time to play with it...
Click to expand...
Click to collapse
oooo, interesting! Thanks for that.
I tried it.. it works a treat... might be worth adding it to the sticky? Mods?
am I the only one getting an error when trying to run BsG G-Config, that i need to update my .net thing on the phone? could someone point me to whatever i might need to grab from windows.com or wherever to get this to work? thanks in advance
malumbreras said:
i have tried Gyrator, and the problem i´ve seen is that the program must be running if you want to rotate screen.
correct or im wrong?
Click to expand...
Click to collapse
That is correct. However, mine starts itself at startup and you can tell it to minimise when it starts, so you don't need to worry about starting it up all the time. It also doesn't use much memory, so you don't need to worry about that either.
Corell said:
am I the only one getting an error when trying to run BsG G-Config, that i need to update my .net thing on the phone? could someone point me to whatever i might need to grab from windows.com or wherever to get this to work? thanks in advance
Click to expand...
Click to collapse
would anyone be able to help me with this one? thanks alot