Related
I have a BlueAngel / SX66 on Cingular. I have been through every ROM upgrade you can imagine, all with the hopes that SOME DAY the bluetooth will work properly. More specifically, I have a stick BMW and it's impossible for me to talk on this thing and drive at the same time, not to mention really unsafe, but I absolutely need to talk in the car because I'm on the move a lot. There is a bluetooth headset interface in the car that I know is pretty damn good because it works so beautifully with Motorola devices (specifically the somewhat ancient V600 I have). My SX66 can barely get through 3 seconds of being connected to it before it just goes haywire and drops the connection, locks up my stereo, etc. It's a disaster. So every time a new ROM comes out I sit for hours upgrading just hoping that maybe this time it will work. I've tried a Motorola HS810, HS850, a Logitech Mobile Freedom, a Jabra BT800, and an Ericsson HBH600. Not one of them can consistently hold a connection without it dropping here and there and me having to go to the Bluetooth manager and "reconnect". These are all reputable headsets that work flawlessly with other devices.
Conclusion: The MS bluetooth stack is pathetic.
Problem: I want my SX66 to work with JUST ONE bluetooth device flawlessly. It doesn't need to be the car necessarily, but that would be really sweet if it did. I have recently upgraded to WM5 in another feeble attempt, but alas WM5 doesn't appear to be compatible with GoodLink, the messaging sync software that I'm tied to that makes me use this god awful device (I won't use a Treo because the Palm UI is garbage and it has its own host of problems I've seen). I'm going to have to downgrade back to 1.40 to get GoodLink to work again because its pretty vital to me.
Question: Does anyone know how to get Bluetooth to work consistently with any headset, paired with an SX66? I seriously have sank like $400 just in headsets trying to get this piece of crap to work. If there are any stack upgrades, firmware flashes, etc. WHATEVER I'm willing to try anything. This is the only Windows based device available on the market that is compatible with GoodLink and has a qwerty keyboard that's easy to use.
FYI, the BA uses the Broadcom/Widcomm BT stack, unless you've upgraded it to WM5.
I've been struggling for several months now to get my MDAC III working with my built-in car Bluetooth hands-free. The full details are below, but in short, I'm told that the system seems to work OK with Wizard, and I'm wondering what about the Wizard could be different to the Artemis (Bluetooth stack perhaps?), and if there is a difference, is there anything I can do about it?
The full issue: The system I'm trying to connect with is in a Land Rover Freelander 2 (LR2 in the US) Initial pairing was a bit hit and miss, but now I've got the the phone paired with the PTI, that's not a problem and they automatically pair whenever I start the car.
I can succesfully initiate or answer a call from the car, but the call itself isn't routed through the car's speakers/mic, it just goes through the phone as normal. However, once in a call if I select the "privacy" option on the PTI (which would normally have the effect I've already got of passing the call to the phone), and then select the "hands free" option, it does what it should and routes the call through the car. Effectively, it's as if the system starts in "privacy" mode rather than "hands free". Once I've done this once, subsequent calls work fine, routing straight through the car, but only until the ignition's turned off. The next time I start the car up I'm still paired, but calls go through the phone again.
If anyone's got any suggestions, I'd really appreciate them.
Thanks!
Try this
Had similar in a BMW...
Try www.jetwaremobile.com
Thanks, did try that but didn't seem to help, it seemed to be more geared towards additional functions like phonebook syncing rather than just getting a working connection in the first place. Maybe I'll give it another go.
Same Probleme On 207
hi,
I have the same ....
I precise that work fine with the original m650 rom, i search many hours but i found nothing, i try bluetooth toggle with no effect...
please help us !
thank for dev for everything they do !
RE
I try many combinaison so:
if i want to use my bt car kit, i'm forced to validate hands free option at every phone call...
I think it's btaudiotoggle the cause of mly problem, he is included in the aje rom...
you think it's possible ?
TangerineTractor said:
Had similar in a BMW...
Try www.jetwaremobile.com
Click to expand...
Click to collapse
Thanks TangerineTractor!
I fixed the problem I have with car kit of OPEL ANTARA using the software you said. It works disable sending Phonebooks.
I am having a similar problem with Wizard Mobile 6 cooked ROM. Before with the official O2 ROM on my Xda Mini S, it worked fine. The car would automatically recognise the phone whenever in proximity, and all calls would go through the speaker.
Now, I have to press the car kit's button (Nokia Bluetooth) each time I get in the car, to tell it to search for devices - i.e. the phone doesn't automatically announce its presence.
So, is there a different Bluetooth Stack we can try?
My Orbit works fine with my Nokia CK-7W using a B&B ROM.
Thanks, and yep that's the same car kit I have.
When you get in the car, do you have to do anything, or does the car kit automatically detect the phone? Mine doesn't since getting the Wizard Mobile 6 cooked ROM.
Do you know what Bluetooth Stack you use, and if I can download it anywhere for the Wizard?
No, just switch on the ignition key and away it goes. Also if the car kit is set as the default hands free if the phone rings it should try to connect to the car kit.
The radio I am using is 2.95.90 I have no idea what bluetooth stack it is, Tom Codin cooked the ROM, he will know.
Okay thanks. Does anyone know if the BT Stack is part of the Radio ROM? If so I'll just try a different Radio ROM.
Hey guys,
i was wondering if anyone was facing this problem... i have the Alpine 103BT in my car which has an inbuilt parrot bluetooth system. I have noticed that when someone calls me it shows up on the lcd on the headunit then immediately drops the call! it shows up as a missed call on my tp2... but when i call using this bluetooth system then it works like a charm!
Any idea what i can do to change this? Is there a setting i have inadvertently changed?
I would really appreciate this because this call dropping really defeats the point of hands free!
Elfangor
I've got the same problem.
Just look a few posts down the list and you'll notice my 'cry for help'.
So far though, nobody's come to the rescue.
I've been reading that our phones have a unique BT-implementation, so it could be down to a bug in that area. If more people show up having similar issue, we might know.
Until then: fingers crossed and hope for sombody to post a solution.
Great! its not just me then! I hope it gets sorted! it gets on your nerves after awhile!
That's putting it mildly.
This sucks big-time: when on a business-call you definitely don't want your headset to die in you. During any conversation, really, but blasting along the motorway it's the last thing you need.
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Your symptoms sound a bit different from ours so it could be a totally different problem.
We might need to be paitient until one of the experts has a simiral experience and dived into the software.
Until then, I'm baffled.
eidikos said:
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Click to expand...
Click to collapse
Come to think of it... i have a similar problem.. when i get an incoming call it stops the music and registers a call and just a few second later..i get the --------------, and then the music comes back...by the time i fish my phone out of the pocket ive got a missed call! havnt noticed any problems when im calling though.
i tried repairing the phone to the unit but same thing! not sure what else i could do
Similar problem (I think)
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
I've got exactly the same problem as the original poster. Mine's a vodafone TP2 with the standard vodafone rom. I've got the Alpine 104BTi. I can make outgoing calls ok but as has been described any incoming call will show the caller ID for about 1 ring and then it hangs up the call.
I've got a Jabra BT500 which works perfectly. I am wondering whether it may be the actual firmware in the Alpine device. If you look at the phone compatibility list on the Alpine website the TP2 is not listed. It worked fine with my Kaiser and this is listed as compatible.
I emailed their tech support and they said they are waiting for their customized version of the firmware from Parrot to be updated, possibly around September. I've noticed that for the Parrot standalone devices these all list the TouchPro2 as compatible, so maybe this will be fixed.
They did mention that the firmware update may only be available through the dealers. I'll keep an eye on their website. My current firmware version is 320.
I've read some other threads somewhere that people with the vodafone rom describe having problems with bluetooth that are fixed after flashing with a different rom so may turn out to be that.
Infuriating though.
It seems to be the poor implementation of the new BT stack
I have had similar problems to those described above, my Peugeot van has inbuilt BT (uses Parrot in implementation) which just misbehaves unbelievably including hanging up the current call if a new one comes in on call waiting, phonebook access is rediculously slow and buggy.
My Jabra BT8010 disconnects at random
My Jawbone disconnects very occasionally
The stack is full of bugs and HTC must know it - I reported it on their support system and firstly fobbed off, then they said they would look into it, then the log was auto closed - very convenient way to show they are meeting targets in resolving issues.
It is poor, poor and more poor. The new WIDCOMM stack looks great but doesnt really work.
Very poor for a flagship handset and they should sort something out
I went to an Alpine delearship who suggested what ukdoc was trying to do.. basically firmware update! Are you using a different Alpine website? Because the one i go to says coming soon on the page where software updates are supposed to be. I culdnt find any connection with parrot and alpine on the parrot website!
Basically what im asking is how are you going to be getting the firmware update and could you direct me towards it!
Many thanks Mate
Elfangor
rlsxda said:
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
Click to expand...
Click to collapse
FYI, I just upgraded the radio to "4.46.25.24 - HTC" (see http://forum.xda-developers.com/showthread.php?t=549939) and the handsfree seems better...not sure it's perfect, but it does answer and hangup now...
Upgrade Alpine CDE-104BTi firmware from 320 to 360
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
dsalter said:
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
Click to expand...
Click to collapse
I've just done likewise, and can also receive incoming calls at last!
Hi
I just tried updating the BT in my Alpine 104bti. The laptop connects to the headunit but the update tool don't find the connection, I've tried disabling the antivirus etc. But it don't see the connection but the connection is displayed on the laptop.
Any Ideas whats wrong ?
Cheers Gomez...
SOLVED
Tried again using a laptop with Xp on worked first time, Seems Windows 7 was causing issues.
I have a PC computer in my car that I use for many thing and I want to integrate my phone into it by using a Bluetooth voice gateway to play the sound over the speakers in the car and use a mic to talk into. Obviously since this is the Rhodium forum I have a Touch Pro 2 (by Verizon) running OEM ROM. The PC is running XP SP2 with Widcomm bluetooth stack.
Making calls I have no problems. When I'm in range it connects and when I make a call its flawless. The problem is when I get a call. When a call comes in it rings once then answers without me doing anything. And no its not the auto answer feature on a headset (i know that would be the first reply if i didnt say that). The issue is that even though there is a BT link to the PC the voice gateway doesn't connect until in a call. When i make one it connects when i hit send to dial, when i receive a call it connects when it starts to ring and once there is a connection it answers. It would be bad if im driving and someone calls i dont want to talk to or something and it just answers without me knowing.
I tested this theory with my regular BT headset. I had the headset off and I called the phone and once it started ringing i turned on the head set and sure enough it answered.
My question is how do i get it to hold a solid connection all the time like a normal BT headset would? Or make it not answer once a headset is connected?
I tried using the BlueSoleil BT stack also. This one worked ok once everything was connected but every time I came back in range of the PC or turned the PC on I would have to manually connect the voice gateway again.
Thanks for any help!
Edit: oh yea, also I had the same issues with my XV6800 (Titan) and never got it to work right either.
anyone have any ideas on this?
no one on this forum has tried this other than me?
Anyone else having bluetooth problems or is this operator error?
I can switch bluetooth on, make my handset visible, pair with other devices and receive files from other handsets, however when I try to send anything, I can't connect to paired devices and bluetooth hangs meaning I have to switch my handset off and on.
I was using bluetooh last night and all was ok
but unlike my last phone c902 the bluetooth is on a timer then turns off visibility
Working fine for me. Paired up my bluetooth headset and will still be working hours later even if I haven't interacted between them.
It's strange, devices show as paired but not connected and I can't make them connect.
Have been able to use BT for file transfer between my Desire and laptop and HD2. Also connected to my Plantronics BT headset. I think you need to have an appropriate BT driver for some devices like BT keyboards.
I too am having minor issues.
The wife's hands free kit (Parrot CK3000 evo) in the car supports voice dialling by sending contacts to it and then recording a tag which is associated with the contact. This way the kit can do the voice dialling for handsets that don't support it.
For some reason the Desire refuses to send contacts to the hands free kit claiming it doesn't support the correct bluetooth profiles. This obviously isn't the case as all the other phones we have tried work perfectly with the CK3000.
Only a minor issue, as in my car which has the CK3300 everything works fine (including syncing the phonebook to the car kit). It's more of a problem for the wife though, as she wants to upgrade to the Desire on Saturday when her contract is up for renewal but at the minute won't be able to voice dial from the car.
Dae.
Strange. I'll try connceting to my laptop later.
I too am having difficulty sending files over bluetooth. I can accept files fine, from any source, yet cannot send from my HTC Desire. First the notification says complete, but 0 files sent. Then going inside it shows it has failed. And then clicking it and retrying shows Unknown file. What's going on??
Tried sending to two mobile phones, and a Windows 7 laptop. Easily works the other way around. Also, sometimes I can't turn my bluetooth off properly, it just crashes the chip while turning off and can't turn it on or off until I reboot. Thought it might be Advanced Task Killer, but tried the same thing immediately after a reboot and still can't send files. Any ideas?
still no closer to solving this, I think it may be going back tomorrow.
I'm also having problems...
I have the Parrot CK3200 LS-COLOR and it connects to the phone ok, or vice versa and then it always falls over when trying to sync the contacts... It shows my facebook profile pic and then it fails.
If I dial a contact through the phone, or receive a call, it comes out fine through the speakers.
So I'm wondering if it's something to do with the way the the desire handles contacts.
Sorry if there's been a resolution to this, I did search first
me to also having the same problems. spent 4 hours on google last night and still no closer.
Weird as it might sound, I had no issues connectiong to car stereo. But when I tried to pair it with friends mobile, SonyEricsson c902 - it crashed!
I was trying to send a picture file I have downloaded using bluetooth.
Also, can anyone tell me how to send a mp3 file I have downloaded off the internet to another mobile using bluetooth?
Thanks
Have you enabled FTP under Bluetooth advanced settings? I have no problem transfering files to and from PC or other mobile phone. Also make sure the device is dicroverable and paired.
I had a similar problem which I wrote to HTC about: I paired and connected the Desire with my bluetooth car head unit and it works fine for phone & audio, but it will not auto connect each time I get in the car and I have to go through the pairing process and enter a code each time. Voice dialling also doesn't work. My previous handset (Touch HD) connected automatically if the bluetooth was on so I don't think it's a problem with the head unit. Someone suggested it might be due to an old bluetooth protocol on the head unit (I'd like to avoid having to replace it if possible).
i managed to send a file to another htc desire today, last time i tried, i admit i didn't enable the ftp service, however I could not send via bluetooth to a nokia n96 but to be fair, my desire probably just didn't want anything to do with it . but on a serious note I cant seem to get it to send to my windows 7 x64 disto.
dreamdealer said:
i managed to send a file to another htc desire today, last time i tried, i admit i didn't enable the ftp service, however I could not send via bluetooth to a nokia n96 but to be fair, my desire probably just didn't want anything to do with it . but on a serious note I cant seem to get it to send to my windows 7 x64 disto.
Click to expand...
Click to collapse
take that back .. apart from the N96 joke.. reason windows was not accepting was because avast anti virus was blocking it.
Pumpkin Lantern said:
I'm also having problems...
I have the Parrot CK3200 LS-COLOR and it connects to the phone ok, or vice versa and then it always falls over when trying to sync the contacts... It shows my facebook profile pic and then it fails.
If I dial a contact through the phone, or receive a call, it comes out fine through the speakers.
So I'm wondering if it's something to do with the way the the desire handles contacts.
Sorry if there's been a resolution to this, I did search first
Click to expand...
Click to collapse
I have the same problem, any help would be appreciated...
Sorted! (For Desire)
Sorted this problem out! See new thread
Pumpkin Lantern said:
Sorted this problem out! See new thread
Click to expand...
Click to collapse
where's the new thread?
yurikg said:
where's the new thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=668042