this problem is occuring with the new roms , it s quit irritating... how to solve it ??????????????????????????????
Got the same over here
Trued allot of roms bud still didn’t got a good one
When you have afresh rom installed
It looks like it gone work properly it reacts fast like it should be
Then when you install your favo aps lik battery pack or spb
It still works oke the signal strength is maximum
Bud if its on for a day it’s terrible
Y think something in the rom making it hang
To bad there isn’t any task bar ap so you can see what’s making the universal hang
Still looking for the right one
i meant right after power on ... device is not responding
i didnt mean slowness after a while due to loaded program memory, i meant TOTAL hanging / stop responding of the whole device for few seconds right after you power it on .... ??????
We need more information such as...
What ROM version are you using?
What softwares do you have installed and running?
Does a hard reset solves the problem?
Did it ever occurred before this?
Did you install something different this past few days?
do you have software at the today screen which is installed on SD card?
if yes, remove from today screen or install to main memory...
le_toubib said:
this problem is occuring with the new roms , it s quit irritating... how to solve it ??????????????????????????????
Click to expand...
Click to collapse
Are you using Wisbar Lite ???
AKU/cashe ????
when i press the power button the screen goes on , but no icons are responding at all , untill few seconds...
it occured with "JASJAR_ME_13082_171_10900_wwe_ship"
also with the recent o2 rom
the new arabic i-mate rom
but it didnt occur with older roms
also it occured in a baby windows ( before installing anything )
i believe it is related to the AKU2 , i think it is related to a change in cashing or so ....
many thanks for reply
One more idea: about the same happened to me when I installed the new Qtek ROM.
After a while I found a note on these forums that it is advisable to remove SDDAEMON.EXE from the startup. It was causing a lot of duplicated notifications, and my device was hanging frequently.
So I deleted the SDDAEMON link from startup. Since than it's all OK !!
I tried to disable BatteryStatus(from today), and after some SR its still GOOD!!!
PROBLEM SOLVED
"Hello,
I have a lot of hours behind me, because of working on my problem.
I did not found any solution, but i would like to share my experiences...
Symptom:
After some soft reset the pda can't boot. B&B v4.0 os loader image could be seen...
I tried install my programs in a lot of variation, but after some soft reset, the system fails while booting...
I dont know what is the cause of the problem.
Tried flash with art_htcwwe_11240501_026790_wwe_ship, after uspl, flash with 4.0. Same.
Tried to take the device into boot loader, change the splash screen, it hepled once. After the next SR same problem.
I have HTC Artemis (from HTC, not from any distributor)
Some ppl have written for me, they are fighting with our problem, please write here...
thx"
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
yes, i used bb 3.7 before too...
Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?
dzign-it said:
Hi
Did you overclock your device by any chance? I overclocked to 247 using batterystatus in the B&B4 rom and i ticked add boost. Then when i opened up file explorer, it crashed, then started to load - then kept crashing while it was booting up, kepy going around in circles, load, boot up, crash, boot up, crash.
Hard rest solved the problem, i now overclock without the new "boost" feature. Maybe this helps?
Click to expand...
Click to collapse
I tried without any change of BatteryStatus settings...
xmas said:
I tried without any change of BatteryStatus settings...
Click to expand...
Click to collapse
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?
zsitvayb said:
Did you try to download again (or from any of the mirrors) the original ROM file, and reflash? Isn't it possible it damaged during the download process and it makes this fault in your device?
Some people said that who can't install B&B 3.7, it solved out their problem.
Bár lehet magyarul egyszerűbben kommunikálnánk?
Click to expand...
Click to collapse
Downloaded again. The size of the file from an other mirror is the same.
off
Jah, lehet ezt nem töröm annyira , Bájtra pontosan ugyanakkora, de az önkitömörítős exe amúgy sem indulna, ha hibás lenne a mérete.
on
similar problem
Samribi said:
I don't know if it can help, but I flashed B&B 4.0 after B&B 3.7 and I still don't have those problems. I've done about 5-10 soft resets. Sometimes it seems that it takes longer to boot, but never locked.
Bye
Click to expand...
Click to collapse
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help
maxi_boy said:
i do have similar problem. I've installed B&B4 and it works fine until you sync it with exchange server, though sync goes ok, the device sticks during the first reboot after the sync and there is nothing i can do about it but HR
please help
Click to expand...
Click to collapse
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical
I have the same problem.
First time was after plugging in my SD card to install tom tom.
2nd time was after uninstalling the 3.7 boot dialer.
A reflash fixes this but obviously it would be better if there was a proper fix which did not brick my phone each time I add an app!
the issue might be with time/date settings
maxi_boy said:
sorry, it actually sticks when first rebooting regardless of any sync ((
so the problem is identical
Click to expand...
Click to collapse
i've just tried not to change time/date settings and everything works fine...
Yesterday, it happens to me too.
But with a hard-reset I've solved the problem.
I think I've got the cpu scaler with the turbo boost on.
Same here...
Hard reset brings the phone back to life. But when doing a install of an app and doing a Soft Reset he dies again...
Makes the ROM as good as useless for me.
I'll try a reflash and see what happens.
Today another time.
I've ran sprite backup and when the artemis reboots to make the backup the tomtom installer has beguin to reinstall itself. The backup has been interrupted and has made a soft-reseft. Them I sohuold to hard reset.
today I hanvent the boost option, only cpuscaler was on.
This is mostly due to the kaiser home plugin - it does not like to be hurried on boot. So no overclocking on boot - so untick remember last cpuspeed and overclock after reboot and do not use traylaunch part of bs - also causes lockup. Works on my rom.
But I've reporduced the problem without overclocking...
I think it's not an overclock problem.
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
I have also over clock, pc synch and exchange synch. I also had to re-flash. however, seems that it works very well if I flash HTC boot image after B&B4 before any other apps. now,I have BB4, HTC boot screen and all apps I like, and ... have SRed many times
ZeroIQ said:
Mmmm,
I think I fixed it!
I re-flashed my device and this time I did not modify the boot screen (World with sunrise HTC). So O2 is displayed but that's ok as I do not have any problems anymore!
Tengo, TomTom, SKTools, SPB Diary, MoDaCo Nodata and WM5torage installed and still a Soft Reset is no problem!
I'm a happy man!
ps. I also use an Exchange server (via gprs) for my mail.
Click to expand...
Click to collapse
,
The splash screen couldnt be the reason for crashing.
(i think there is a chance to brick again after some soft reset)
Same thing happen to me
Same thing happen to me, after instal everything on my device, after couple of softresets (becouse of installs) i though that eyerything is ok. But when i was trying to change biotouch setting, and then soft reset the device it didn't boot enymore. That's one bug in tom's rom that i have found, only one, but irritating. I think that biotouch setting was the reason of lockup aftersoft reset, hopefully i have full backup before this change, so i make hardreset and restore everything
I have just joined the community and updated my TYTN to 4.31 ROM - look great
I was wondering if anyone is facing my problem:
I have set in the Pwer settings to "turn off the device after XX minutes"
The device does turn itslef off, but it seems that only soft reset can get it back on!
The hard buttons are not responding, the devce cannot even accept calls!
Did anyone face the same problem and manage to resolve it?
As a workaround, I am currenty using, Not to trun off the device, which probably consumes alot of battery!
no i don't have this problem it is working OK with me with same schaps rom 431
did you update your bootloader? I would hard reset again. If that doesn't work then try to reflash. Make sure your bootloader was updated first though.
Lets me see if I got this straight
When I load the RGB screen, I see this information in the RED block:
HREMES200
IPL-1.01
SPL-1.40.Olipro
The Device information shows
ROM Version: Schap's 4.31
ROM date: 10/03/07
Radio Version: 1.16.00.00
What is the bootloader exactly?
What should I select when I run the Schap's 4.31 ROM, there are several options there
BTW - the OS is SLOW, is that how it is with every wm 6.1 for Hermes devices?
I got confused when I first flashed a different rom (after installing HardSPL Olipro) - I just choose Safe SSPL as a tutorial recommended I do, and I've flashed three ROMs now without an issue just by using the Safe SSPL option.
After reflashing (and updating to hardSPL) I managed to find out the problem - it was the hebrew language by Orange which has casued this.
After removing it all worked well (almost)
Hi all,
i've been using ARHD Roms since a few months and never had any serious issues with that (except proximity sensor fail ..) but now i'am a bit clueless.
Since flashing ARHD 6.1 (using SuperWipe first, no other Mods, everything was fine after flashing) and using it a few days i noticed two things:
First: Random Force close of different apps. I saw that even SuperUser app does FC every single time. Cleared cache - fine.
Second: I noticed that i somehow pressed 2 or more keys at the same time (i can reproduce it now - hold "power" button and shortpress "home"-button) and did a "screenshot" out of the box (in the ARHD FAQ-Thread is an info which says it does not work without modifications/3rd party tools) and - now it comes - ecaxtly since this day my power menu doesn't work anymore.
Long-pressing doesnt work, i can even hold it for 20 seconds and nothing happens until i stop pressing, then the screen goes off but no power menu appears - so the hardware of the button is fine, i still can power on the phone as well
Tried rebooting several times, even flashed ARHD 6.1 again (checksum is fine) but the issue still exists... everytime i'd like to reboot i need to use rom manager and boot in recovery or remove battery.
Is this a known bug? found nothing via search function :/
You can try this post:
http://forum.xda-developers.com/showpost.php?p=17623012&postcount=51332
Thanks, enabling the Secure Credentials fixed the problem. Unfortunately only until reboot, then the box isn't ticked anymore and i've to enable it again - but thanks anyway, i can live with that for now.
Strange issue ... i wondered why not more useres experiencing it, my phone is "stock" arhd 6.1 without any mods or somehting like that ...
I can confirm that his happends to me alot too.
On the same rom.
Still no solutions other than Secure credentials?
Same situation here. Although I update to 6.1.5 the problem still happens. Any idea rather than secure credential ?