Spare parts for the O2 orbit/mda III/artemis - P3300, MDA Compact III General

To cut a long story short, the silver wheel on the front of my O2 orbit has fallen off and i was just wondering if anyone knew where i could find a spare.
Thanks in advance!
Tom

Try htc directly or in the Universal accessories forum there is a link to a firm in china who deal in htc spares and at a very cheap rate,they also promise to ship the part in three working days.Hope this helps.

timford said:
To cut a long story short, the silver wheel on the front of my O2 orbit has fallen off and i was just wondering if anyone knew where i could find a spare.
Thanks in advance!
Tom
Click to expand...
Click to collapse
Did you manage to source a new wheel? I dropped mine and the wheel is grinding as it spins now.

Related

Car Holder for your Artemis do you want one?

Hello to all
Again me trying to see if you interested on buying a holder for your htc p3300, mda compact 3 ex...
I am going to place an order for this kit but I want to know your opinion first, is this must have or just an extra?
Here is the link for the pic
http://www.sidiplus.co.uk/car holder htc p3300.jpg
Let me know please
How much are we looking at for this piece of kit?. I need to get a car holder soon. I was thinking about getting the one, that attatches to a vent, rather than the windscreen mount.
Hopfully about £29.99+£2 recorded delivery it includes car charger or £29.99 including recorded delivery from my website
MADJID said:
Hopfully about £29.99+£2 recorded delivery it includes car charger or £29.99 including recorded delivery from my website
Click to expand...
Click to collapse
need a vent or magentic one
hate putting it on the windscreen
anyone???
Yeah madjid, any vent mounts??
So according to your responses,is not worth getting the suction mount,therfore I will look for the vent one
thanks to u all
Nice one madjid, let us know when you have them.
Any luck yet madjid????????
Found this one guys hope this helps? i have used this company lots of times and they are ok!they have lots of other mounts to under the htc p330 section
http://www.mobilefun.co.uk/product/12047.htm
Chris
Whoops meant the htc p3300 section but you new that
Ps i got my martin fields screen protector from these guys and it works a treat dont bother with any cheapo ones they are crap been using martin fields since xda1 days and they are mint fit and forget, and cheaper than ebay! use this code MFNEWS018698DEU
for free postage before 31 december
Chris
MADJID said:
Hello to all
Again me trying to see if you interested on buying a holder for your htc p3300, mda compact 3 ex...
I am going to place an order for this kit but I want to know your opinion first, is this must have or just an extra?
Here is the link for the pic
http://www.sidiplus.co.uk/car holder htc p3300.jpg
Let me know please
Click to expand...
Click to collapse
Hi Madjid, i am actualy interested in something like this, This one has a handsfree speakerfone too is it???
CAn u let me know where i can buy this from?

Dropped my Artemis

Damn alcohol I hate you!! [shakes fist at the air]. Anyway, I dropped my Artemis and pretty much FUBARed its fascia so it's now all scratched and looks horrible (device seems fine though
Do fascia replacements exist for these devices and if so, can someone please point me to where I can buy one in EU.
Any help would be highly appreciated.
Thx
I am usually the last person on earth to recommend something as aftermarket as this - but the silicone cases on ebay look to be the closest fix out there right now. And if you are susceptible to getting so intoxicated you will drop your phone again, this thing might just save its life next time.
Same problem with dropped fone...
Astro:
I dropped my P3300 as well, scuffed up the facia of the housing and have two big scars on my handset. I was really not liking that at all so I decided to contact HTC America to send it in for repairs at my cost to replace the housing.
Well, after two weeks of evaluation and one week of shipping, NO DICE. My Artemis is still scuffed up and I am out 20bux for return shipping. I have emailed HTC back to complain but it looks like that avenue will come to no avail.
Time to find the pantone colour for the HTC branded device and try to touchup paint the housing myself, definitely will decrease my resale value in the future.
Let me know if you have luck finding a solution to replace the housing.
Good News!
I found what you guys are looking for...
http://mobile.brando.com.hk/HousingHTCP3300.php
itschase said:
I am usually the last person on earth to recommend something as aftermarket as this - but the silicone cases on ebay look to be the closest fix out there right now. And if you are susceptible to getting so intoxicated you will drop your phone again, this thing might just save its life next time.
Click to expand...
Click to collapse
lol, I wasn't really that intoxicated, but because I am lazy and take then phone out of the pouch while attached to my belt (instead of taking the puch on my hand, then the phone out) it's very prompt to slip... I knew it'd happen one day.
I was rather tipsy and distracted looking at something when "swishhh off my hand onto floor... face down sliding 3-4 meter on hard rough road" Nice
Astro:
I dropped my P3300 as well, scuffed up the facia of the housing and have two big scars on my handset. I was really not liking that at all so I decided to contact HTC America to send it in for repairs at my cost to replace the housing.
Well, after two weeks of evaluation and one week of shipping, NO DICE. My Artemis is still scuffed up and I am out 20bux for return shipping. I have emailed HTC back to complain but it looks like that avenue will come to no avail.
Time to find the pantone colour for the HTC branded device and try to touchup paint the housing myself, definitely will decrease my resale value in the future.
Let me know if you have luck finding a solution to replace the housing.
Click to expand...
Click to collapse
Sorry to hear that mate, hope you get it fixed
I found what you guys are looking for...
http://mobile.brando.com.hk/HousingHTCP3300.php
Reply With Quote
Click to expand...
Click to collapse
Thanks very much, bit pricey but at least it confirms they do exist
astrodemoniac said:
lol, I wasn't really that intoxicated, but because I am lazy and take then phone out of the pouch while attached to my belt (instead of taking the puch on my hand, then the phone out) it's very prompt to slip... I knew it'd happen one day.
I was rather tipsy and distracted looking at something when "swishhh off my hand onto floor... face down sliding 3-4 meter on hard rough road" Nice
Click to expand...
Click to collapse
I was joking with ya If could have back half of the things I broke while drinking..., check out the link I found...2 posts up. I don't think it will work for an Orbit (Or willll it....hmmmm) but it seems to be the complete package.
I wonder if one could change over the insides of an Orbit to make it look like a 3300.....interesting...
Thanks for the link. I changed out many motorola housings in the VXXX series handsets but never a smartphone. This is exactly what I am looking for. Now the search is one for instructions for the change over!
It is an interesting idea to try and put another 3300 device into the HTC branded housing.
Great!
disassembling ARTE
bex,
look on my document, how to disassemble ARTE device.
Good luck
http://forum.xda-developers.com/showthread.php?t=298413
regards,
fdp24
Thanks FDP, looking at your docs now. Was a bit tricky using the russian language link, but figured it out.
Much thanks, will take my time looking this over.
Regards,

P3300 Housing cover on O2 Orbit???

Hi, I'm from Portugal and I have an O2 Orbit and I need a new housing cover, but since the O2 isn't on sale in Portugal I was wondering if it is possible to use an HTC P3300 cover instead??? Anyone tried this already???
I might be able to help.
is the cover your after for the battery.. if so pm me and i can send you one out. its an old one i had from my old uk 02 Orbit. Im not sure if the p3300 will fit. maybe some one else can help you, but I dont mind sending it out ya,it's just sat here doing nothing, its is a little worn on the silver bits but better than nothing
mavisdavis - Actually I was thinking about the whole cover, battery front and back, but in fact the worst part is the battery cover... If you say you have a battery cover that you don't use and it isn't any trouble to you to send it to me, I'll sure be thankful!!! I'll pay for the ports of course... If so PM me, ok???
Nevertheless my question remains, is it possible to use a P3300 cover in a O2 Orbit???
Thanks in advance
Hugo Costa
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
hcosta said:
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
Click to expand...
Click to collapse
Can't imagine postage to be that much, as these are very light, I would accept £30.00 gbp for it, it is in very good condition and I will include 3 stili as they are different to the orbit one's.
Jester01 said:
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Click to expand...
Click to collapse
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
ryomahino said:
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
Click to expand...
Click to collapse
Sorry to say, but it's the same mother board, so check before you post !
And I've had a p3300 oem HTC housing on my orbit for the past few months, yes you are correct with the battery lock, but that's an addition 02 have added.
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
elatirio said:
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
Click to expand...
Click to collapse
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Jester01 said:
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Click to expand...
Click to collapse
makes sense. thanks for the feedback
Jester01: Thank you for your offer, but i managed to get a cover around here, thanks anway.
Case: Artemis vs XDA Orbit
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
sasha817 said:
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
Click to expand...
Click to collapse
They are 100% exchangeable...
Jester01: Thank You pal! Now I would buy XDA's one, 'cause I like it better ^^
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
feridoun said:
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
Click to expand...
Click to collapse
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
sombatsombat said:
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
Click to expand...
Click to collapse
Thanks, I'll open it up and take a look at the connections - maybe the screws need a bit more tightening.
They both cost around £25 and it's all made of plastic - painted plastic although the XDA case is certainly better quality than the htc design.
I still have the HTC housing which is 'as new'. I'll sell it for £20 if anyone's interested.
How to open the XDA Orbit
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
hqqh said:
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
Click to expand...
Click to collapse
I did find some instructions by googling, I think the trick is to peel off the rear part by levering the stylus in it's port.

touchscreen XDAIIs and XDAIII - the same ? what about this ebay offer ?

hello,
there is a cheap offer for XDAIIs touchscreens on ebay.
i have a XDAIII - not a XDAIIs - i have a PB20B1 (board id 5) - not a PH20B.
does somebody know, if this touchscreen would work on my device ?
thank you!
xda 3 and 2s are the same model.
it´s just the provider name.
(the "real" name is HTC BlueAngel)
in germany its called xda 3 and in usa and england it is called 2s.
but thera are 2 different display types for the Blueangel !
watch the wiki
hello,
i readed the wiki: ok IIs and III should both be board ID 5 - and so they should both have the sony display.
but: the seller says for IIs and for PDA2K ! pda2K would be board ID 6 - so it's not the sony display ?
i don't get it ? does he not know, what he's talking about - or are the displays different - but the touchscreen the same ?
do you know ?
thank you very much.
that should help.
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD
hello,
actually the wiki does not really answer my question.
i only want to buy the touchscreen-digitizer (only the glass and the digitizer-foil) - not the whole LCD.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170201516276
Since the sellers at ebay can't tell me, if their touchscreen is for the toppology-LCD (i assume, cause i think in USA might me more toppologys than sonys ??) or for sony-LCD i want to make sure to buy the right thing.
so, there are 2 different LCDs - but do they maybe have the same touchscreen-digitizer (glass and foil) ? if so, i can buy it without doubt.
thank you!
are you german ?
(because you have a xda 3 that is only sell in germany)
hello,
i bought the XDAIII used - from a german guy.
Both touch screens are the same, the difference is in the connector to the back of the lcd, one has wide spacings , the other thinner, the one posted in your ebay link is the thinner one. the only way to tell what screen you need is to look inside. Also the thinner screen has two holes either side the tracks, the wider spaced tracked one has one hole in the centre of the tracks.
regards
Gary
hello,
sorry for the late reply:
i already looked inside my ba - a while ago. i also looked at the wiki. so i'm pretty sure i have the sony LCD.
so, does this touchscreen from ebay fit ?
thank you very much.
I've the same question...
Edit: See this link: http://cgi.ebay.co.uk/I102-Touch-Sc...ryZ41343QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Dimlow_uk said:
Both touch screens are the same, the difference is in the connector to the back of the lcd, one has wide spacings , the other thinner, the one posted in your ebay link is the thinner one. the only way to tell what screen you need is to look inside. Also the thinner screen has two holes either side the tracks, the wider spaced tracked one has one hole in the centre of the tracks.
regards
Gary
Click to expand...
Click to collapse
I got lcd with 'wide' tape and just bought a replacement digitizer with 'thin' tape.
I think I'll manage to solder them together.
Question is..
Will it work? If I've done it properly, will it work? (i'm kinda smart with soldering iron xd)

XDA Orbit 2 - Replacement rubber scroll wheel

I bought my Orbit 2 a couple of months ago and very happy with it , but just the other day the rubber ring on the scroll wheel disappeared, obviously it fell off somehow, the glue not strong enough i guess.
Rather than have to send my XDA back for repair and wait 10 days, i'd prefer to get the rubber ring and stick it on myself. The wheel still works, but not so effective without the friction of the rubber. Does anyone know where i may be able to get the part from?
thanks
Rob
Mines gone as well. Is it possible to get spares anywhere? Did you get yours sorted Rob?
I had a longlong chat with the support. They told me that I have to sent my phone in for repair (what takes rather long since I am living in Austria and now have to send it to Germany). I could kill HTC for this. All I need is that rubber.
you could check if there exists an "O-ring" seal that fit in the whell,
at least this is what I would do...
Ste
the same has happened to mine. I found mine on the floor ,didnt know what it was and binned it. a week later I noticed it was missing ion my orbit2 lol. o2 has told me you cannot buy spares ,and also even thought my orbit2 was only a month old,external parts not covered in the warranty .basically 60quid and a long wait if I want it repaired . I ain't happy .
Same has happened to mine and having previously owned an original Orbit. I prefer the originals ball roller compared to the ring & button on the Orbit 2.
Step back me thinks...
I bought 225 pieces of Rubber O-rings off ebay and some super glue and it is sorted for me. But then I sold the phone and bought my self a brand new one with the original ring. Any one needs link for the O-rings please let me know.
Same problem for me too... do you have that link for the o rings or has anyone managed to source the actual part?
Thanks,
Tom
My scroll wheel has fallen off.
Does anybody have any info/links for replacements?
Anybody successfully replaced their scroll wheel?
the same sh*t happend to me -> I called to to O2 authority, and they rejected my claims as it is external part. Then I came to one of the O2 stores in Saturn and withdrew the ring from the exhibition phone Ok, maybe its not that fair, but I see no other way
the overall build quality of the orbit 2 is poor in comparison to the origonal i find the whole thing verry plastiky i have also just got off the phone to O2 and have explaned that the rubber on the touch weel has come off and they wanted to send me a new phone lol i advised them a repair would be sufficant and they are sending me a returns bag to have the item fixed. i didnt even have to get angry just explaind the problem and that i have researched it on the net and found many otheres have had the same issue and the wonderfull lady just said sorry ill get this sorted for you. i couldnt beleve it all god customer service for me it seems lol
update they replaced the phone for me as i hadnt herd back from them regards return and i seem to have a spare unit as they sent the new one but it wasnt to be dispatched till they receaved the old one oops lol now how to fix that dam wheel ?????? lol

Categories

Resources