Develop Bugs

I am a little confused here....

Check out this article:
http://forum.brighthand.com/showthread.php?p=1413594
Snip:
Keyboard
The keyboard is actually very impressive. HTC has gone with square keys, largely because the space doesn't allow for the taller oval shaped keys like the Q uses.
HTC has even built in some fantastic logic that -- now that I've seen it -- makes me surprised others haven't done, too. One of the big hassles when working with a limited keyboard is accessing the special characters like punctuation. On this model, when you hold down a letter key, you'll get the alternate option. So if I'm typing an email and hold down the "H" key for a second, instead of an "h", I get a "?".
Am I going nuts? I don't have this feature on my phone. Maybe, it only applies to DASH? But from the pictures in the article I can't tell. Looks like a pre-pro unit, but again- it has blue F keys instead of green on preproduction unit.
Anyone?

From http://www.howardforums.com/showthre...6&page=1&pp=15.
HowardForums said:
5. Input the Alternate Symbol/Letter Easily
If you want the !, press and hold the M key until it shows up.
If you want the ?, press and hold the H key until it shows up.
and so on...This works with any of the keys.
NOTE: This only works on the T-Mo Branded Dash! Does not work on the HTC S620
Click to expand...
Click to collapse

are you nexus on hofo?
i guess i already answered your question there if you are
yes it's only on the dash thus far
i'm still not sure if it's on the extended rom or a registry change

JwY said:
are you nexus on hofo?
i guess i already answered your question there if you are
yes it's only on the dash thus far
i'm still not sure if it's on the extended rom or a registry change
Click to expand...
Click to collapse
Yes, thank you.

Mapping Close (Real Close) To a button

Hi,
Since SPB Pocket Plus is not really working with the Shadow, I decided to reflash from scratch and not to use it anymore. I got everything I need from other apps, exept for one very important function.
SPB Pocket Plus has a [Close] function that you can map to a button and it actually closes the app not just sends it in the background. I use the HTC task manager to do that on the screen, but I want to map it to a button button 5 to be exact I been searching for few hours now to no avail.
Basicly to review I need to be able to close (really close) apps with a hardware button (button 5). Please help. THank you.

yozh said:
Hi,
Since SPB Pocket Plus is not really working with the Shadow, I decided to reflash from scratch and not to use it anymore. I got everything I need from other apps, exept for one very important function.
SPB Pocket Plus has a [Close] function that you can map to a button and it actually closes the app not just sends it in the background. I use the HTC task manager to do that on the screen, but I want to map it to a button button 5 to be exact I been searching for few hours now to no avail.
Basicly to review I need to be able to close (really close) apps with a hardware button (button 5). Please help. THank you.
Click to expand...
Click to collapse
I use WisBar Lite for that, it works well

cpz21 said:
I use WisBar Lite for that, it works well
Click to expand...
Click to collapse
you can map wizbar close function to a button ? I gata try that I always meant to try wizbar, maybe now I will try the iphone theme I hope this works

Yes you can
cpz21 said:
I use WisBar Lite for that, it works well
Click to expand...
Click to collapse
does wisbar seem to run slow on shadow for you? I stopped running it because I thought it was quite slow.
@yozh
you can also do some cool stuff with mortscript

peezy said:
does wisbar seem to run slow on shadow for you? I stopped running it because I thought it was quite slow.
Click to expand...
Click to collapse
It is bit slow the 1st time to bring up the start menu after a SR, after that seems ok.
@yozh
I mean Wisbar Lite, not Wizbar Advanced/desktop. you can't run that iphone theme with wisbar lite.
Another option (to map the CLOSE function) is AEB plus.
mortscript is a little too heavy for me

cpz21 said:
It is bit slow the 1st time to bring up the start menu after a SR, after that seems ok.
@yozh
I mean Wisbar Lite, not Wizbar Advanced/desktop. you can't run that iphone theme with wisbar lite.
Another option (to map the CLOSE function) is AEB plus.
mortscript is a little too heavy for me
Click to expand...
Click to collapse
OK looking in to the AEB plus rigth now.. never heard of it before, thatnks for a great tip

yozh said:
OK looking in to the AEB plus rigth now.. never heard of it before, thatnks for a great tip
Click to expand...
Click to collapse
WOW AEBplus worked great lets see how it handles it self thanks alot

I'd recommend AE Button Plus, but I wrote VJOkButt to do this and some other stuff too.
V

vijay555 said:
I'd recommend AE Button Plus, but I wrote VJOkButt to do this and some other stuff too.
V
Click to expand...
Click to collapse
Yo VIJAY your button is EXACTLY WHAT I WAS LOOKING FOR !!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thank you so much

I hope so... but remember, AE Button Plus does much more and is highly recommende.
But VJOkButt is a very focused app, for one (and a bit) functions only.
V

vijay555 said:
I hope so... but remember, AE Button Plus does much more and is highly recommende.
But VJOkButt is a very focused app, for one (and a bit) functions only.
V
Click to expand...
Click to collapse
I just need it to close stuff thats it, simple, and you app also doesnt close activesync and aeb does. so thatnk you again.

Is it just me, or am I the only one who has the actual '<close>' option in buttons in my Start>settings>buttons option? Has anyone looked?
That is what I use so I have it mapped to the usual CommManager wasted button since if you want CommManager you can simply keep the silly thing in your bar at the bottom.

agovinoveritas said:
Is it just me, or am I the only one who has the actual '<close>' option in buttons in my Start>settings>buttons option? Has anyone looked?
That is what I use so I have it mapped to the usual CommManager wasted button since if you want CommManager you can simply keep the silly thing in your bar at the bottom.
Click to expand...
Click to collapse
Its not a close, its a min. the app is still open take a look in memory

vijay555 said:
I'd recommend AE Button Plus, but I wrote VJOkButt to do this and some other stuff too.
V
Click to expand...
Click to collapse
Hi vijay555,
Can I use your app to really close running programs by using the hardware-Ok-Button??

hi..
is there anywhere i can downld htc task manager v1.51..the new version?..i`ve been looking all over but there`s only version 1.5 is available..
thanks in advance..

Remap 'home' button to 'start'

Along the bottom of the phone there's a home button and an endcall which, within programmes, seem to do the same thing - take you back to the today screen. Or, in my case the 6.5 CHome thingy. And the back button in most apps takes you to the home screen too - so that's three buttons largely doing the same thing most of the time.
The new phones with 6.5 preinstalled will have a windows-flag start menu button, I assume this will open up the new hexagony start menu.
Is there a way of remapping the home button so it launches the start menu instead?

That is EXACTLY what I have been thinking for the last days. Pressing Home-key should naturally bring up the start-menu.

Nice idea, even because reaching the top left corner with your right thumb(maybe for left handed it's easier ) while holding the HD with the right hand is a little bit tricky

I'd like something small to do this but I have a feeling most people will return with the suggestion "use aebplus to remap"

I have the same feeling wiggz, There must be a registry key or something that can be changed and put into cab format? Anyone got any ideas?

Me to
So, we are many!!
I too have been looking for a way to do this for ages.
I too will be watching this thread with interest and hope.
Nick

Wiggz said:
I'd like something small to do this but I have a feeling most people will return with the suggestion "use aebplus to remap"
Click to expand...
Click to collapse
No aeblus cannot map the home button as it's hard coded into manila!
bonesy said:
I have the same feeling wiggz, There must be a registry key or something that can be changed and put into cab format? Anyone got any ideas?
Click to expand...
Click to collapse
so as the home button is coded into manila it mean's one has to play with the manila files and remap to start menu all that would mean is to change some scripts!!
bottomline Home button in theory can be mapped to the start menu!! so it's plausible!!!

i'm going to watch this thread as well --- i've been looking for this since I got hold of my HD. I've already remapped the "back" button to S2U2 via AEB since you are correct, essentially the home, back, and end buttons all work very similarly.
Hoping that someone posts a solution to this!

i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!

i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!

Thanks,but could give more informations to remap keys,please ? The list is empty when i launch the application ...

Same here. I was so happy when I found this thread..

When I tried installing that, it did not work... Maybe it was my ROM.
There are REG keys that remap home in certain cituations, i.e. manilla but I have yet to find a way to get the reg key to do anything else.
The new keypad.dll maps it to a normal vk_lwin, so you can remap it as you like.
Unfortunately I have not yet seen it an any ROM.

gfreek said:
No aeblus cannot map the home button as it's hard coded into manila!
so as the home button is coded into manila it mean's one has to play with the manila files and remap to start menu all that would mean is to change some scripts!!
bottomline Home button in theory can be mapped to the start menu!! so it's plausible!!!
Click to expand...
Click to collapse
Ok I take this back if I can get the tool given by jdmsleepr to work!!
jdmsleepr said:
i have the solution...install this program and you can change all the hard keys to do almost any function...i have mine set up to do the exact same thing that you want it to do!!
cheers!!
Click to expand...
Click to collapse
Many thanks for this jdmsleepr you sure will make many hd owners very happy if this tool actually works!!
However I have installed this and configured the buttons to my liking but it's not working! upon start up I get error "SMartTouch service is not found" so have I missed something? can you please give us more details on how one configures this tool of yours?

gfreek said:
Ok I take this back if I can get the tool given by jdmsleepr to work!!
Many thanks for this jdmsleepr you sure will make many hd owners very happy if this tool actually works!!
However I have installed this and configured the buttons to my liking but it's not working! upon start up I get error "SMartTouch service is not found" so have I missed something? can you please give us more details on how one configures this tool of yours?
Click to expand...
Click to collapse
It is for Diamond and the author says here post 10 "For the touch HD, maybe you should download HTCAPI.DLL somewhere, put it in /Windows and try again". Haven't read the whole thread though so not sure if this is what the problem is.

i know its a little confusing to get it started...so heres what you do...install cab, go to program files\dredsensor and click on dredsensor.exe and a config.ini will appear...now close out whatever app you are using to view files...and open dredsensor...now you will see default under name...tap default and then click menu, then edit...change type to launcher...then go to click and tap the gray box next to the home key...go to events and chose Misc:Start, hit select, hit ok to comfirm, change whatever others you want to...then hit save, then hit ok to confirm...then hit exit...then you should be good to go...hope this helps!!

custardo01 said:
It is for Diamond and the author says here post 10 "For the touch HD, maybe you should download HTCAPI.DLL somewhere, put it in /Windows and try again". Haven't read the whole thread though so not sure if this is what the problem is.
Click to expand...
Click to collapse
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .

Marcdu81 said:
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Click to expand...
Click to collapse
can i know what r the dependencies .. i mean what files r needed for the four buttons to run as i use kitchen... i need to knw ...thanks

not working for me,installed app then fix,selected type:hardkeysimul,set the home to start,tried it and all I get is an error popup which stays onscreen all the time even after soft reset,had to do a hard reset. Any help from you who got this thing working?

Marcdu81 said:
Hello,my opinion : if you post something in blackstone thread it's normally compatible with this pda , no ?
Edit : i build this cab for our HD and now it works ! Don't forget to do a soft reset .
Click to expand...
Click to collapse
Thanks! just did this as per your instruction but still no joy!! still get the same error message on start up "SMartTouch service is not found"

|28-nov_i-zoom|[Tricks and Tips] MULTI TOUCH with SINGLE TOUCH?!

this one is on android but single touch device:
http://www.youtube.com/watch?v=e7jgOibdIfM
htc hero multi touch:
http://www.youtube.com/watch?v=3AgEjBIt1d8&NR=1&feature=fvwp
and im sure this dell is not multy touch:
http://www.youtube.com/watch?v=icOMJuuWePY
PLZ IF you find me a program or hack or browser that working on this trick on my Xperia x1
the trick is based on this : http://www.youtube.com/watch?v=y2HD3fUEKO8
after a big research i found the perfect program that can do the trick Iswish - http://www.youtube.com/watch?v=0vPt7Mdm6vk
it have the ability of pinch to zoom
the problem is that i cant fond the download any of the versions...
plz find it!!!

He moves only one finger, so it's possible with some cleaver programming

3D-GRAF said:
He moves only one finger, so it's possible with some cleaver programming
Click to expand...
Click to collapse
i know that why i ask for any one to make a smart program!!!i think that program save the 1st touch then go to the second and x2 the middle kinda complicated
BUT SHOULD WORK

To my knowledge, some apps actually already use this technique. When you press two points on a screen, it takes the coordinates exactly in the middle and "presses" that. It doesn't work with a screen full of buttons though, as there might be another button where the "dummy" press occurs.

Angelusz said:
To my knowledge, some apps actually already use this technique. When you press two points on a screen, it takes the coordinates exactly in the middle and "presses" that. It doesn't work with a screen full of buttons though, as there might be another button where the "dummy" press occurs.
Click to expand...
Click to collapse
which apps plzz tell me
i think if some one can make a program that save the 1st touch then the others will be the zoomand if the 1st spot is far from the middle and getin closer so its zoom out

HMMMM
dxdiadora said:
which apps plzz tell me
i think if some one can make a program that save the 1st touch then the others will be the zoomand if the 1st spot is far from the middle and getin closer so its zoom out
Click to expand...
Click to collapse
Well....we know that Opera doesnt...and IE and Skyfire and so on....
Seems like those would be the only relavent apps right?
i mean for me the multitouch would be the most usefull in web browsing...not so much in any other programs...

acidbath5546 said:
Well....we know that Opera doesnt...and IE and Skyfire and so on....
Seems like those would be the only relavent apps right?
i mean for me the multitouch would be the most usefull in web browsing...not so much in any other programs...
Click to expand...
Click to collapse
For me its important too so plzz any one hack it or get at least 1 app that uses this trick it'll be the most useful app
ALL MULTI TOUCH APPS ARE WELCOME!!!

Jees. Calm down.

Yeah, you're getting a bit hyped there. Perhaps its time for you to get another phone?
Anyway, there was a GBA emulator around which used that, since you wouldn't be able to press both movement and something else at the same time. I have no idea where it is though - was months ago I saw it.

jea got this GBA prog but never played on touchscreen, opera with multitouch would be very fine, but the display of the xperia x1 is to small for that aktion by using fingers... thats my point of view, but i thougt that the hardkeyboard is to small to type, too. and i was wrong
so it would be a nice gag to get opera browser with multitouch function..

Angelusz said:
Yeah, you're getting a bit hyped there. Perhaps its time for you to get another phone?
Anyway, there was a GBA emulator around which used that, since you wouldn't be able to press both movement and something else at the same time. I have no idea where it is though - was months ago I saw it.
Click to expand...
Click to collapse
can u plz tell me the name of that GBA emulator (i have meeboy emulator only gameboy color not advence)
NOTHIng metter just plzz share it or its name plzzz i soo need to have it

dxdiadora said:
can u plz tell me the name of that GBA emulator (i have meeboy emulator only gameboy color not advence)
NOTHIng metter just plzz share it or its name plzzz i soo need to have it
Click to expand...
Click to collapse
No. Instead I'm going to ask you to read my post again: please read my post again.

how did you find it >>>> in that way find it again plzzzz i can google it for you and u tell me ok?windows mobile gba

Hi!
Please be careful not to make people crazy about a resistive touchscreen, to become a real multitouch with a piece of software.
A resitive touchscreen like on the Xperia is not like the capacitive ones.
There is simply a physical limit.
Please get yourself a little background about these technologies.
When you press two points on a screen, it takes the coordinates exactly in the middle and "presses" that.
Click to expand...
Click to collapse
Angelusz is absolutely right. Nothing more nothing less!
With a resisitive touchscreen, you can sample only one "touch" at one moment in time.
It doesn't work with a screen full of buttons though, as there might be another button where the "dummy" press occurs.
Click to expand...
Click to collapse
I won't doubt that some tricky programmers may use the effect, to get something like a multitouch feeling, but the real UI will never behave like it does e.g. on an iphone.
Please slow down dxdiadora
Regards,
scholbert

scholbert said:
Hi!
Please be careful not to make people crazy about a resistive touchscreen, to become a real multitouch with a piece of software.
A resitive touchscreen like on the Xperia is not like the capacitive ones.
There is simply a physical limit.
Please get yourself a little background about these technologies.
Angelusz is absolutely right. Nothing more nothing less!
With a resisitive touchscreen, you can sample only one "touch" at one moment in time.
I won't doubt that some tricky programmers may use the effect, to get something like a multitouch feeling, but the real UI will never behave like it does e.g. on an iphone.
Please slow down dxdiadora
Regards,
scholbert
Click to expand...
Click to collapse
thnx for the information about multitouch but can u plz think about my idea :
to make a prog that:
1.take your first touch save it while you still thouching it you touch somewhere els and "it presses the middle of them " then if you move your finger then the middle moves and the prog will chek if it is closer to the 1st point that he saved so it zoom in the first point you pressed
i know that it cant be like iphone but plzz can u try this trick?? ill be so pleased
thnxxx for helping anyway

As far as I know. and I am really sure about this.. You cant use Multi touch on the x1. like. never unless you changed the touch panel on the phone it self or something like that.

[EDIT]
You know what?? I've decided to shut up. it's a shame really that op is making such a big deal out of this crap. multitouch on resistive? ok.
now cool down a bit, otherwise You may jizz in Your pants...

problem with your idea is that, it doesnt see the first finger placement, the sensors are in the corners , so it doesn't tell where you press, but the dead center of pressure, and it counts that as one press, not two separate finger positions. That being said, there is no possible way for it to save the first press, because the first press doesn't actually exist

iswish
can some1 find the software any cab of this iswish please
i realy want the pinch to zoom !!!!!

Check this http://forum.xda-developers.com/showthread.php?t=593290
And oh how close to home
SEARCH!!
booya

[App]Multi 2.0 - Show and Explain Dual-Touch Technology On Resistive Screens

Multi 2.0 is an application that shows the Dual-Touch Technology and explain how it works!
[30,July 2010]explain more things about the Dual-Touch Technology.
downiel said:
... but when i press one of these two fingers a little bit stronger, the "Fake Point" is going crazy That does not appear when i am pressing with my nails, fortunately :d
Click to expand...
Click to collapse
Click to see this picture,it may tell you something about it.:
Also
It's Not exactly on the GamePad that "You can ONLY MOVE the SECOND finger you put with your First finger FIXED!"
Just do these step by step,if you wanna understand what I mean:
1.Run this app and turn to "Gamepad" page
2.Press the left-button with a finger of your left hand
3.Press a round-button with a finger of your right hand
-Now You can only move your right-hand finger.
4.Release your left-hand finger.
5.Do as the Step 2 again.
-Now You can only move your left-hand finger.
That's all.
[Explanation]
After Releasing your first finger.The Fake Point inside would go out of the screen.
So the app knows that you have release your first finger.
And it would treat the Second Point as a New First Point.
It means that you can set a New Second Point again and move it.without releasing all your fingers!
[27,July 2010]VGA & WQVGA versions Available Now!
Features:
Picture - You can drag the picture with one finger or stylus and zoom the picture with two fingers[Pinch to Zoom]
GamePad - An On-Screen GamePad that support up to two pressed buttons!
Fact - To show how this application works inside.
Just download and run it without installing..
It may work on all WinMo with resistive screens.
need .NET CF 3.5/3.7 which I think you all know it.
Notice:
My English may be too suck to be understood.
Touch the screen with two fingers one by one but not at the same time!(You can do it quickly even it seems to be done at a time)
To zoom the picture,a gab of about 2cm between two fingers is needed when you start touching the screen!
A Chinese version of sentence for who may understand its translation better than the English version:想要缩放图片,两只手指在按下的时候必须有大约2cm的间距!
You can ONLY MOVE the SECOND finger you put with your First finger FIXED![Not exactly on the GamePad]
How it works?
See the "Fact" part of the application.
And touch the screen with two fingers(one by one).
You'll get three points:
Fixed Point - It is got when you put your First finger.
Real Point - It is truely detected by the hardware when two fingers are put.
Fake Point - where your second finger put.As a matter of fact,the hardware doesn't know anything of it.The position is worked out by the application.
How to get the Position of the second Finger?
NOTICE that when two or more fingers are put on the screen,the hardware would just get the Point in the central of shape which is made up by fingers' Positions.
So.Two fingers's positions(points) make a line.And the hardware gets the "Real Point" in the middle of the line.
Reversely think.We've got the First finger's Position and the Mid Position.
The Second Finger's Position should be in the direction opposite the First finger through the Mid Position.
PS
-This is my first post here.
-I know some members here has been developing the Multi-Touch(Dual-Touch) technology.But I had the idea of creating multi-touch application last year.
-The picture on the application written "Mobile 2.0" but not "Multi 2.0".It's a website[mobile20.com.cn] in China that make evaluations of mobile.The Chinese version of this application was released there on June 7,2010
-Sorry for my poor English..

Pretty interesting app just tested it on my wvga phone
But what really caught my eye was the gamepad thing. Would love to see this in morphgear so we have dualtouch which would make many games more playable.
Maybe I dream to much but still would be great

Do you have future projects for resistive screens now?

iceeyes91 said:
Pretty interesting app just tested it on my wvga phone
But what really caught my eye was the gamepad thing. Would love to see this in morphgear so we have dualtouch which would make many games more playable.
Maybe I dream to much but still would be great
Click to expand...
Click to collapse
I'm willing to give the code to anyone who wants it.
(It's written in VB.NET)
But I really have to modify it.As the code is in a mess within some Chinese comments.
Maybe I'll write a 'GamePad'-only(or 'Picture'-only) program for developers.

zinconnu said:
Do you have future projects for resistive screens now?
Click to expand...
Click to collapse
Maybe I'll release a dual-touch drum that called "Drum It!"
__________
I should have clicked MULTI-QUOTE..
But now I can't delete this post.

TangoChen said:
Maybe I'll release a dual-touch drum that called "Drum It!"
Click to expand...
Click to collapse
Good idea, that will be funny! But i prefer the gamepad.

Hey,Ge Men,Nice work!

TangoChen said:
I'm willing to give the code to anyone who wants it.
(It's written in VB.NET)
But I really have to modify it.As the code is in a mess within some Chinese comments.
Maybe I'll write a 'GamePad'-only(or 'Picture'-only) program for developers.
Click to expand...
Click to collapse
Wonderfull
Sadly I dunno anything about programming , so I can only support by testing/donating
Keep up the work, it would extend all my expection having dual touch on my phone

ghost_nup said:
Hey,Ge Men,Nice work!
Click to expand...
Click to collapse
Hi.a Chinese guy.
I just couldn't understand what is 'Ge Men'.
But after searching for it on Google.It returns'您是不是要找： 哥们 各门 格门'
lol.It means man in Chinese.
iceeyes91 said:
Wonderfull
Sadly I dunno anything about programming , so I can only support by testing/donating
Keep up the work, it would extend all my expection having dual touch on my phone
Click to expand...
Click to collapse
Thx!!But I haven't got a paypal account yet..It may takes one year till I'm 18 years old.

Great App! I have tested it on my Touch Pro (VGA Screen). In Gamepad mode I have only one round button but everything else worked good!
If both fingers are horizontal to the screen its pretty precise, if I have my fingers diagonal on the screen it differs much.
But: Thank you for your app, it shows that it is possible
Greets

The QVGA won't work on my kaiser .
The pinch zoom works though, Nice work!
The second finger on the screen is a bit off, from the fact tab, so that's why the gamepad doesn't work too well. It registers a press in another spot.

Which file do u use on VGA?
Multi2.0 QVGA.7z or Multi2.0 WVGA.7z ?

终于有中国的哥们发布强帖了~
终于有中国的哥们发布强帖了~

KobiP said:
Great App! I have tested it on my Touch Pro (VGA Screen). In Gamepad mode I have only one round button but everything else worked good!
Click to expand...
Click to collapse
AdamiX said:
Which file do u use on VGA?
Multi2.0 QVGA.7z or Multi2.0 WVGA.7z ?
Click to expand...
Click to collapse
Sorry for omitting the vga version!
And it's uploaded just now.
KobiP said:
If both fingers are horizontal to the screen its pretty precise, if I have my fingers diagonal on the screen it differs much.
But: Thank you for your app, it shows that it is possible
Greets
Click to expand...
Click to collapse
Ya I found the problem,too.
And I thought it was the screen/hardware's problem.
Maybe I'll add a feature for a future project to adjust the value.
Thanks for reminding me!
nemuro said:
The QVGA won't work on my kaiser .
The pinch zoom works though, Nice work!
The second finger on the screen is a bit off, from the fact tab, so that's why the gamepad doesn't work too well. It registers a press in another spot.
Click to expand...
Click to collapse
Oh.Thanks for reporting the problem!

This sounds great!
I hope you go on to make a gamepad to be used in emus, so that we can play the same games the HD2 does!

nice work.

Very good work! Gamepad works very well, resizing the image not as good, but that's also a great progress Maybe just my phone has this problem (Touch HD), but when i press one of these two fingers a little bit stronger, the "Fake Point" is going crazy That does not appear when i am pressing with my nails, fortunately :d
Sorry for my english and keep creating such a good applications! ;d

Any plans to work on a ..?
@TangoChen Any plans to work on a system–wide pinch to zoom solution? OndraSter has been workin' on one here, but has gone on holiday. Perhaps, you two should collaborate.

It would be great if you managed to replace the HD2's resources files and fool the entire system in thinking you actually have a capacitive screen.
The DLL (or any other kind of resource files, I didn't study this in detail, but for instance, just checking the "Pinch to zoom" menu in BSB Tweaks instantly crashes the HD ! ) could then be added in cooked ROMs and simulate the official "pinch to zoom" behavior...

thanks
that's great job