Whenever I compose and not able to send the SMS and click the OK button it disapear, in normal condition it shoul be saved in the Draft folder.
Although it is visible in the counter when I open the draf folder there is nothing in it.
I already perform a soft reset and try to boot in safe mode to check if there is a conflict with the application installed at my phone but nothing works.
I have tried to explore the folder windows/messaging to check if the Draft SMS is physically saved in the device and I think it is there (by checking the date and time of the file is created).
I need some advise on how can I solve this problem withou performing a hard reset, because rigth now I'm just manually deleting files at windows/messaging to save storage space.
I know harset will definetlt solve this but I dont want to perform a hard reset since I dont have a PC to configure my XDA back ang installed my favorite applications
You might need to hard reset...to solve this problem...
Avoiding Hard reset
I know Hard reset will definetly resolve my problem but will introduce more because I dont have a PC to doit as for now. I'm just currently renting one a internet cafe
wow is going to be dificult if you don't have computer..
Withou a Computer
Yah, I know it is difficult, although rigth now my hand are itchi to hard reset my phone I'm trying hard not to because I will not be able to use my favorite apps ang games. If I just have an admin priveledge with this PC that I am using I will not have any second thought to performe a hard reset.
That is why I posted my problem here, for my hope there there is somebody that could help me.
In addition I have Resco explorer install witha registry editor plugin, so incase i need to check or edit any file or registry I can.
You can try backup with Sprite Backup or Spb Backup. Hard Reset then restore everything except e-mail/messaging.
Been running my MDA Compact III for just under a week now. Everything was going fine, tom tom working etc. Yesterday I installed SPB Pocket Plus , now I can't connect via activsync and can't delete any files (from phone or memory card), get the error message....
Error Deleting File
Cannot delete 'filenamehere': Access is denied.
Make sure the disk is not full or write-protected and the file is not currently in use.
What have I done? I've tried a soft reset, that didn't work. I've took the memory card out and can delete files when I put it in a card reader. I'm hoping if changed a setting somewhere but I can't for the life of me work out what I've done.
Can anybody offer any suggestions?
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Thanks for your reply, couldn't uninstall anything so had to go down the hard reset route. Wasn't too bad though, I got back up and running in about an hour will all my programmes installed and working again.
Still don't know what happened though.
zerimar said:
I've never had problems after SPB Pocket Plus was installed. Currently I don't have it installed on my device since I use it solely just for navigation thus I cannot find a more concrete solution but to try uninstalling SPB Pocket Plus and see if your problem is solved.
Click to expand...
Click to collapse
activesync problems
iam also facing the same problem. is there any alternative solution for this problem other than hard reset.
thanx
It may have nothing to do with Pocket Plus but rather the mysterious problem discussed here:
http://forum.xda-developers.com/showthread.php?t=285511
I had the same message and couldn't delete the erroneous files. My solution was also to hard reset.
My view
Oh i had the same problem,these files become stacked and are due to long paths,use the tool available at pathtoodeep.com ,it is a tool which deletes and also searches such undeleteable files and also assists in installation and sharing of long pathed files
Hi Guys
I have been having problem with my XDA IIs known as BlueAngel= DarkAngel for me lol, the problem is that When I try to remove the programs through Remove Program short cut in settings First its asking me if I wanted to remove the selected program and when I click an error massage apears and says ( ... program was not completely removed. do you want to remove it from list of installed programs? ) and when click on yes, the same program which I was trying to remove, still apears to be in the list of programs installed in the storage memory.
I have tried MaUpgradeUt_noID_more_ruu[1].dll
by entering the USB mode and running the program but after complition I check the installed programs and all programs are still there.
Does any one have any I dea to remove the programs pls
Regards.
Been there!
Had a similar problem a while back
http://forum.xda-developers.com/showthread.php?t=386773&highlight=mechanic+unload
The only solution I found was to wipe the Rom and start again! Sucks, but it seemed to be the only option.
Go get a PIM backup utility - Spb Backup - and save all the PIM data then do a full ROM update (even if it's to the same ROM you have now - you need to fully reinstall)
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
Still, look on the bright side - it's a chance to clean away all the clutter, and update to the latest ROM ;-)
I would advise getting a piece of cloning software (Spb Clone) and using it reguarly as you are reinstalling! Then, if this happens again, you can just clone back to the last version that worked!
Bird
(I think Spb Software should be paying me, with all the advertising I keep doing for them on these forums )
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?
Ok, I installed a cab which I think was wrong for my phone - It's the BignAdad transparent taskbar cab. I have a TP2. Anyway, now I can't access all settings nor can I go into the start menu, everything else works properly although it's a bit slower and the icons at the top of the screen don't display properly.
Because of the functions that are disabled, i cannot uninstall this cab. I do have total commander. Can I uninstall it from there? If I have to reset to factory settings (not a problem as I won't lose anything major and I have everything backed up on my pc), how do I do that? Can i do it from my phone or is there a part on the phone I have to press in with a pin or something?
Please help me out!!!!
Grimlocc said:
Ok, I installed a cab which I think was wrong for my phone - It's the BignAdad transparent taskbar cab. I have a TP2. Anyway, now I can't access all settings nor can I go into the start menu, everything else works properly although it's a bit slower and the icons at the top of the screen don't display properly.
Because of the functions that are disabled, i cannot uninstall this cab. I do have total commander. Can I uninstall it from there? If I have to reset to factory settings (not a problem as I won't lose anything major and I have everything backed up on my pc), how do I do that? Can i do it from my phone or is there a part on the phone I have to press in with a pin or something?
Please help me out!!!!
Click to expand...
Click to collapse
What you're talking about is called a Hard Reset...and if you're already installing cabs you find online without knowing about hard resets and how and when to do them, you're getting dangerously ahead of yourself. Use the search box in the top right to look for "TP2 Hard Reset", and read very carefully...you need to make sure you know as much as you can about the possible consequences of your tinkering and how to undo it before you start making potentially disabling changes.